summaryrefslogtreecommitdiffstatshomepage
path: root/src
diff options
context:
space:
mode:
author angelosa <salese_corp_ltd@email.it>2016-06-15 19:38:04 +0200
committer angelosa <salese_corp_ltd@email.it>2016-06-15 19:38:04 +0200
commitb49b23b7dfa48377bf5e7abfdd45630248cadc01 (patch)
treec4dda142a7d354de3a19a015695f0627852e0cb3 /src
parent1dd74e3eb7986e87f287a74d1ec348e7234cee0c (diff)
Added command strobe callback interface for LDV1000, and hooked it up to esh.cpp driver. [Angelo Salese]
(out of whatsnew: also fixed irq 0 hookup, using device_timer to ack an irq for MAME is never a good idea)
Diffstat (limited to 'src')
-rw-r--r--src/devices/machine/ldv1000.cpp10
-rw-r--r--src/devices/machine/ldv1000.h8
-rw-r--r--src/emu/romload.cpp2
-rw-r--r--src/mame/drivers/esh.cpp27
4 files changed, 28 insertions, 19 deletions
diff --git a/src/devices/machine/ldv1000.cpp b/src/devices/machine/ldv1000.cpp
index 36dae481853..27c874eadf7 100644
--- a/src/devices/machine/ldv1000.cpp
+++ b/src/devices/machine/ldv1000.cpp
@@ -63,8 +63,8 @@ const device_type PIONEER_LDV1000 = &device_creator<pioneer_ldv1000_device>;
static ADDRESS_MAP_START( ldv1000_map, AS_PROGRAM, 8, pioneer_ldv1000_device )
AM_RANGE(0x0000, 0x1fff) AM_MIRROR(0x6000) AM_ROM
AM_RANGE(0x8000, 0x87ff) AM_MIRROR(0x3800) AM_RAM
- AM_RANGE(0xc000, 0xc003) AM_MIRROR(0x9ff0) AM_DEVREADWRITE("ldvppi0", i8255_device, read, write)
- AM_RANGE(0xc004, 0xc007) AM_MIRROR(0x9ff0) AM_DEVREADWRITE("ldvppi1", i8255_device, read, write)
+ AM_RANGE(0xc000, 0xc003) AM_MIRROR(0x1ff0) AM_DEVREADWRITE("ldvppi0", i8255_device, read, write)
+ AM_RANGE(0xc004, 0xc007) AM_MIRROR(0x1ff0) AM_DEVREADWRITE("ldvppi1", i8255_device, read, write)
ADDRESS_MAP_END
@@ -126,6 +126,7 @@ pioneer_ldv1000_device::pioneer_ldv1000_device(const machine_config &mconfig, co
m_z80_cpu(*this, "ldv1000"),
m_z80_ctc(*this, "ldvctc"),
m_multitimer(nullptr),
+ m_command_strobe_cb(*this),
m_command(0),
m_status(0),
m_vsync(false),
@@ -175,6 +176,8 @@ void pioneer_ldv1000_device::device_start()
// allocate timers
m_multitimer = timer_alloc(TID_MULTIJUMP);
+
+ m_command_strobe_cb.resolve_safe();
}
@@ -648,6 +651,9 @@ WRITE8_MEMBER( pioneer_ldv1000_device::ppi1_portc_w )
printf("\n");
}
+ // bit 4 sends a command strobe signal to Host CPU
+ m_command_strobe_cb(bool(data & 0x10));
+
// video squelch is controlled by bit 3
set_video_squelch((data & 0x08) == 0);
diff --git a/src/devices/machine/ldv1000.h b/src/devices/machine/ldv1000.h
index c2f9ead67a6..c7d798d89df 100644
--- a/src/devices/machine/ldv1000.h
+++ b/src/devices/machine/ldv1000.h
@@ -26,6 +26,10 @@
#define MCFG_LASERDISC_LDV1000_ADD(_tag) \
MCFG_DEVICE_ADD(_tag, PIONEER_LDV1000, 0)
+#define MCFG_LASERDISC_LDV1000_COMMAND_STROBE_CB(_cb) \
+ downcast<pioneer_ldv1000_device *>(device)->set_command_strobe_callback(DEVCB_##_cb);
+
+
//**************************************************************************
// GLOBAL VARIABLES
@@ -49,6 +53,8 @@ public:
// construction/destruction
pioneer_ldv1000_device(const machine_config &mconfig, const char *tag, device_t *owner, UINT32 clock);
+ template<class _cmd_strobe_cb> void set_command_strobe_callback(_cmd_strobe_cb latch) { m_command_strobe_cb.set_callback(latch); }
+
// input and output
void data_w(UINT8 data);
void enter_w(UINT8 data);
@@ -102,6 +108,7 @@ protected:
required_device<z80_device> m_z80_cpu; /* CPU index of the Z80 */
required_device<z80ctc_device> m_z80_ctc; /* CTC device */
emu_timer * m_multitimer; /* multi-jump timer device */
+ devcb_write_line m_command_strobe_cb;
/* communication status */
UINT8 m_command; /* command byte to the player */
@@ -122,6 +129,7 @@ protected:
UINT8 m_vbi[7*3]; /* VBI data */
bool m_vbiready; /* VBI ready flag */
UINT8 m_vbiindex; /* index within the VBI data */
+
};
diff --git a/src/emu/romload.cpp b/src/emu/romload.cpp
index 1f56418cad9..e158f7ea304 100644
--- a/src/emu/romload.cpp
+++ b/src/emu/romload.cpp
@@ -811,8 +811,6 @@ void rom_load_manager::fill_rom_data(const rom_entry *romp)
/* make sure the length was valid */
if (numbytes == 0)
fatalerror("Error in RomModule definition: FILL has an invalid length\n");
-
- printf("base %08x %02x\n",numbytes,skip);
/* fill the data (filling value is stored in place of the hashdata) */
if(skip != 0)
diff --git a/src/mame/drivers/esh.cpp b/src/mame/drivers/esh.cpp
index f9ce2dfcbf2..b8e99db0e16 100644
--- a/src/mame/drivers/esh.cpp
+++ b/src/mame/drivers/esh.cpp
@@ -14,11 +14,9 @@ Notes:
Eshb has some junk in the IO TEST screen. Maybe a bad dump?
Todo:
- - LD TROUBLE message pops up after each cycle in attract. NMI-related
+ - LD TROUBLE appears at POST. Sync/timing issue?
- Wrong overlay colors;
- Convert to tilemaps (see next ToDo for feasibility).
- - Apparently some tiles blink (in at least two different ways).
- - 0xfe and 0xff are pretty obviously not NMI enables. They're likely LED's. Do the NMI right (somehow).
- Rumor has it there's an analog beep hanging off 0xf5? Implement it and finish off 0xf5 bits.
- NVRAM range 0xe000-0xe800 might be too large. It doesn't seem to write past 0xe600...
- Maybe some of the IPT_UNKNOWNs do something?
@@ -65,13 +63,13 @@ public:
DECLARE_PALETTE_INIT(esh);
UINT32 screen_update_esh(screen_device &screen, bitmap_rgb32 &bitmap, const rectangle &cliprect);
INTERRUPT_GEN_MEMBER(vblank_callback_esh);
- INTERRUPT_GEN_MEMBER(ld_unk_callback);
+ DECLARE_WRITE_LINE_MEMBER(ld_command_strobe_cb);
required_device<cpu_device> m_maincpu;
required_device<gfxdecode_device> m_gfxdecode;
required_device<palette_device> m_palette;
protected:
- virtual void device_timer(emu_timer &timer, device_timer_id id, int param, void *ptr) override;
+ //virtual void device_timer(emu_timer &timer, device_timer_id id, int param, void *ptr) override;
};
@@ -104,7 +102,7 @@ UINT32 esh_state::screen_update_esh(screen_device &screen, bitmap_rgb32 &bitmap,
//int blinkChar = (m_tile_control_ram[current_screen_character] & 0x80) >> 7;
// TODO: blink timing
- if(blinkLine == true && m_screen->frame_number() & 0x10)
+ if(blinkLine == true && m_screen->frame_number() & 8)
gfx = m_gfxdecode->gfx(1);
else
gfx = m_gfxdecode->gfx(0);
@@ -317,6 +315,7 @@ static GFXDECODE_START( esh )
GFXDECODE_ENTRY("gfx2", 0, esh_gfx_layout, 0x0, 0x20)
GFXDECODE_END
+#if 0
void esh_state::device_timer(emu_timer &timer, device_timer_id id, int param, void *ptr)
{
switch (id)
@@ -328,19 +327,20 @@ void esh_state::device_timer(emu_timer &timer, device_timer_id id, int param, vo
assert_always(FALSE, "Unknown id in esh_state::device_timer");
}
}
+#endif
INTERRUPT_GEN_MEMBER(esh_state::vblank_callback_esh)
{
// IRQ
- device.execute().set_input_line(0, ASSERT_LINE);
- timer_set(attotime::from_usec(50), TIMER_IRQ_STOP);
+ device.execute().set_input_line(0, HOLD_LINE);
+ //timer_set(attotime::from_usec(50), TIMER_IRQ_STOP);
}
-// TODO: 0xfe NMI enabled after writing to LD command port, NMI reads LD port. LDV needs command strobe callback?
-INTERRUPT_GEN_MEMBER(esh_state::ld_unk_callback)
+// TODO: 0xfe NMI enabled after writing to LD command port, NMI reads LD port.
+WRITE_LINE_MEMBER(esh_state::ld_command_strobe_cb)
{
if(m_nmi_enable)
- m_maincpu->set_input_line(INPUT_LINE_NMI, PULSE_LINE);
+ m_maincpu->set_input_line(INPUT_LINE_NMI, state ? ASSERT_LINE : CLEAR_LINE);
}
void esh_state::machine_start()
@@ -350,19 +350,16 @@ void esh_state::machine_start()
/* DRIVER */
static MACHINE_CONFIG_START( esh, esh_state )
-
/* main cpu */
MCFG_CPU_ADD("maincpu", Z80, PCB_CLOCK/6) /* The denominator is a Daphne guess based on PacMan's hardware */
MCFG_CPU_PROGRAM_MAP(z80_0_mem)
MCFG_CPU_IO_MAP(z80_0_io)
MCFG_CPU_VBLANK_INT_DRIVER("screen", esh_state, vblank_callback_esh)
- MCFG_CPU_PERIODIC_INT_DRIVER(esh_state, ld_unk_callback, 90)
-
MCFG_NVRAM_ADD_0FILL("nvram")
-
MCFG_LASERDISC_LDV1000_ADD("laserdisc")
+ MCFG_LASERDISC_LDV1000_COMMAND_STROBE_CB(WRITELINE(esh_state, ld_command_strobe_cb))
MCFG_LASERDISC_OVERLAY_DRIVER(256, 256, esh_state, screen_update_esh)
MCFG_LASERDISC_OVERLAY_PALETTE("palette")