summaryrefslogtreecommitdiffstats
path: root/src/mame
diff options
context:
space:
mode:
authorGravatarGravatar hap <happppp@users.noreply.github.com>2019-02-28 15:20:15 +0100
committerGravatarGravatar hap <happppp@users.noreply.github.com>2019-02-28 15:20:15 +0100
commit4cfc21930e0b27f2127f5564e4c58199354e86e5 (patch) (github)
treef4a484d0975a98210be12ea1426e9ab8998044c8 /src/mame
parent7c1999d4edbc9205dcf8cc3e64a790fbeef4ef63 (diff)
downloadmame-4cfc21930e0b27f2127f5564e4c58199354e86e5.tar.bz2
mame-4cfc21930e0b27f2127f5564e4c58199354e86e5.zip
Philips company is 1 L (nw)
Diffstat (limited to 'src/mame')
-rw-r--r--src/mame/drivers/cliffhgr.cpp44
-rw-r--r--src/mame/drivers/dlair.cpp4
-rw-r--r--src/mame/drivers/firefox.cpp10
-rw-r--r--src/mame/drivers/gkigt.cpp2
-rw-r--r--src/mame/drivers/tecnbras.cpp2
-rw-r--r--src/mame/machine/kc_keyb.cpp2
6 files changed, 32 insertions, 32 deletions
diff --git a/src/mame/drivers/cliffhgr.cpp b/src/mame/drivers/cliffhgr.cpp
index 688798a3b98..efd2290cba7 100644
--- a/src/mame/drivers/cliffhgr.cpp
+++ b/src/mame/drivers/cliffhgr.cpp
@@ -26,15 +26,15 @@ More info on the LD-V1100:
http://www.laserdiscarchive.co.uk/laserdisc_archive/pioneer/pioneer_ld-1100/pioneer_ld-1100.htm
Interrupts:
-The frame decoder reads in the Phillips code from the composite signal into
+The frame decoder reads in the Philips code from the composite signal into
3x8 bit flip flops. If bit 7 of the code is set, then an IRQ is generated.
-Phillips codes come in scanline 17 and 18 of the composite signal for each
+Philips codes come in scanline 17 and 18 of the composite signal for each
field, so if we have valid codes, we would have 4 irq's per frame.
NMIs are triggered by the TMS9128NL chip. The TMS9128NL SYNC signal is hooked
up to the composite SYNC signal from the frame decoder.
Goal To Go Side detection:
-The side detection code expects to read a chapter Phillips code of 0x881DDD
+The side detection code expects to read a chapter Philips code of 0x881DDD
for Side 1, or 0x8F7DDD for Side 2. That would be chapter 1 for Side 1, or
chapter number 119 for Side 2.
@@ -47,13 +47,13 @@ IO Ports:
0x44: W TMS9128NL VRAM Port
0x45: R TMS9128NL VRAM Port
0x46: W Sound/Overlay
-0x50: R Reads lower byte of Phillips code
-0x51: R Reads middle byte of Phillips code
-0x52: R Reads high byte of Phillips code
+0x50: R Reads lower byte of Philips code
+0x51: R Reads middle byte of Philips code
+0x52: R Reads high byte of Philips code
0x53: R Clears the flip flop that generated the IRQ
0x54: W TMS9128NL REG Port
0x55: R TMS9128NL REG Port
-0x57: W Clears the serial->parallel chips of the Phillips code reader.
+0x57: W Clears the serial->parallel chips of the Philips code reader.
0x60: W Input Port/Dipswitch selector
0x62: R Input Port/Dipswitch data read
0x64: - Unused in the schematics, but used in the code (maybe as delay?)
@@ -97,7 +97,7 @@ public:
: driver_device(mconfig, type, tag)
, m_laserdisc(*this, "laserdisc")
, m_port_bank(0)
- , m_phillips_code(0)
+ , m_philips_code(0)
, m_maincpu(*this, "maincpu")
, m_discrete(*this, "discrete")
, m_screen(*this, "screen")
@@ -107,8 +107,8 @@ public:
DECLARE_WRITE8_MEMBER(cliff_test_led_w);
DECLARE_WRITE8_MEMBER(cliff_port_bank_w);
DECLARE_READ8_MEMBER(cliff_port_r);
- DECLARE_READ8_MEMBER(cliff_phillips_code_r);
- DECLARE_WRITE8_MEMBER(cliff_phillips_clear_w);
+ DECLARE_READ8_MEMBER(cliff_philips_code_r);
+ DECLARE_WRITE8_MEMBER(cliff_philips_clear_w);
DECLARE_WRITE8_MEMBER(cliff_coin_counter_w);
DECLARE_READ8_MEMBER(cliff_irq_ack_r);
DECLARE_WRITE8_MEMBER(cliff_ldwire_w);
@@ -127,7 +127,7 @@ private:
required_device<pioneer_pr8210_device> m_laserdisc;
int m_port_bank;
- uint32_t m_phillips_code;
+ uint32_t m_philips_code;
emu_timer *m_irq_timer;
@@ -167,12 +167,12 @@ READ8_MEMBER(cliffhgr_state::cliff_port_r)
return 0xff;
}
-READ8_MEMBER(cliffhgr_state::cliff_phillips_code_r)
+READ8_MEMBER(cliffhgr_state::cliff_philips_code_r)
{
- return (m_phillips_code >> (8 * offset)) & 0xff;
+ return (m_philips_code >> (8 * offset)) & 0xff;
}
-WRITE8_MEMBER(cliffhgr_state::cliff_phillips_clear_w)
+WRITE8_MEMBER(cliffhgr_state::cliff_philips_clear_w)
{
/* reset serial to parallel converters */
}
@@ -209,25 +209,25 @@ WRITE8_MEMBER(cliffhgr_state::cliff_ldwire_w)
TIMER_CALLBACK_MEMBER(cliffhgr_state::cliff_irq_callback)
{
- m_phillips_code = 0;
+ m_philips_code = 0;
switch (param)
{
case 17:
- m_phillips_code = m_laserdisc->get_field_code(LASERDISC_CODE_LINE17, true);
+ m_philips_code = m_laserdisc->get_field_code(LASERDISC_CODE_LINE17, true);
param = 18;
break;
case 18:
- m_phillips_code = m_laserdisc->get_field_code(LASERDISC_CODE_LINE18, true);
+ m_philips_code = m_laserdisc->get_field_code(LASERDISC_CODE_LINE18, true);
param = 17;
break;
}
/* if we have a valid code, trigger an IRQ */
- if (m_phillips_code & 0x800000)
+ if (m_philips_code & 0x800000)
{
-// printf("%2d:code = %06X\n", param, phillips_code);
+// printf("%2d:code = %06X\n", param, philips_code);
m_maincpu->set_input_line(0, ASSERT_LINE);
}
@@ -243,7 +243,7 @@ void cliffhgr_state::machine_start()
void cliffhgr_state::machine_reset()
{
m_port_bank = 0;
- m_phillips_code = 0;
+ m_philips_code = 0;
m_irq_timer->adjust(m_screen->time_until_pos(17), 17);
}
@@ -262,11 +262,11 @@ void cliffhgr_state::mainport(address_map &map)
map(0x44, 0x44).w("tms9928a", FUNC(tms9928a_device::vram_w));
map(0x45, 0x45).r("tms9928a", FUNC(tms9928a_device::vram_r));
map(0x46, 0x46).w(FUNC(cliffhgr_state::cliff_sound_overlay_w));
- map(0x50, 0x52).r(FUNC(cliffhgr_state::cliff_phillips_code_r));
+ map(0x50, 0x52).r(FUNC(cliffhgr_state::cliff_philips_code_r));
map(0x53, 0x53).r(FUNC(cliffhgr_state::cliff_irq_ack_r));
map(0x54, 0x54).w("tms9928a", FUNC(tms9928a_device::register_w));
map(0x55, 0x55).r("tms9928a", FUNC(tms9928a_device::register_r));
- map(0x57, 0x57).w(FUNC(cliffhgr_state::cliff_phillips_clear_w));
+ map(0x57, 0x57).w(FUNC(cliffhgr_state::cliff_philips_clear_w));
map(0x60, 0x60).w(FUNC(cliffhgr_state::cliff_port_bank_w));
map(0x62, 0x62).r(FUNC(cliffhgr_state::cliff_port_r));
map(0x64, 0x64).nopw(); /* unused in schematics, may be used as timing delay for IR interface */
diff --git a/src/mame/drivers/dlair.cpp b/src/mame/drivers/dlair.cpp
index e4db1e43738..2125123dc60 100644
--- a/src/mame/drivers/dlair.cpp
+++ b/src/mame/drivers/dlair.cpp
@@ -141,7 +141,7 @@ private:
optional_device<palette_device> m_palette;
optional_device<pioneer_ldv1000_device> m_ldv1000;
optional_device<pioneer_pr7820_device> m_pr7820;
- optional_device<phillips_22vp932_device> m_22vp932;
+ optional_device<philips_22vp932_device> m_22vp932;
optional_shared_ptr<uint8_t> m_videoram;
output_finder<16> m_digits;
@@ -778,7 +778,7 @@ MACHINE_CONFIG_START(dlair_state::dleuro)
WATCHDOG_TIMER(config, "watchdog").set_time(attotime::from_hz(MASTER_CLOCK_EURO/(16*16*16*16*16*8)));
- PHILLIPS_22VP932(config, m_22vp932, 0);
+ PHILIPS_22VP932(config, m_22vp932, 0);
m_22vp932->set_overlay(256, 256, FUNC(dlair_state::screen_update_dleuro));
m_22vp932->set_overlay_palette(m_palette);
m_22vp932->add_route(0, "lspeaker", 1.0);
diff --git a/src/mame/drivers/firefox.cpp b/src/mame/drivers/firefox.cpp
index 46ef9f4e30e..5f0329ae858 100644
--- a/src/mame/drivers/firefox.cpp
+++ b/src/mame/drivers/firefox.cpp
@@ -103,14 +103,14 @@ private:
uint32_t screen_update_firefox(screen_device &screen, bitmap_rgb32 &bitmap, const rectangle &cliprect);
TIMER_DEVICE_CALLBACK_MEMBER(video_timer_callback);
void set_rgba( int start, int index, unsigned char *palette_ram );
- void firq_gen(phillips_22vp931_device &laserdisc, int state);
+ void firq_gen(philips_22vp931_device &laserdisc, int state);
virtual void machine_start() override;
virtual void video_start() override;
void audio_map(address_map &map);
void main_map(address_map &map);
- required_device<phillips_22vp931_device> m_laserdisc;
+ required_device<philips_22vp931_device> m_laserdisc;
required_shared_ptr<unsigned char> m_tileram;
required_shared_ptr<uint8_t> m_spriteram;
required_shared_ptr<unsigned char> m_sprite_palette;
@@ -445,7 +445,7 @@ WRITE_LINE_MEMBER(firefox_state::coin_counter_left_w)
}
-void firefox_state::firq_gen(phillips_22vp931_device &laserdisc, int state)
+void firefox_state::firq_gen(philips_22vp931_device &laserdisc, int state)
{
if (state)
m_maincpu->set_input_line(M6809_FIRQ_LINE, ASSERT_LINE );
@@ -456,7 +456,7 @@ void firefox_state::machine_start()
{
m_mainbank->configure_entries(0, 32, memregion("maincpu")->base() + 0x10000, 0x1000);
- m_laserdisc->set_data_ready_callback(phillips_22vp931_device::data_ready_delegate(&firefox_state::firq_gen, this));
+ m_laserdisc->set_data_ready_callback(philips_22vp931_device::data_ready_delegate(&firefox_state::firq_gen, this));
m_sprite_bank = 0;
}
@@ -690,7 +690,7 @@ MACHINE_CONFIG_START(firefox_state::firefox)
GFXDECODE(config, m_gfxdecode, m_palette, gfx_firefox);
PALETTE(config, m_palette).set_entries(512);
- PHILLIPS_22VP931(config, m_laserdisc, 0);
+ PHILIPS_22VP931(config, m_laserdisc, 0);
m_laserdisc->set_overlay(64*8, 525, FUNC(firefox_state::screen_update_firefox));
m_laserdisc->set_overlay_clip(7*8, 53*8-1, 44, 480+44);
m_laserdisc->set_overlay_palette(m_palette);
diff --git a/src/mame/drivers/gkigt.cpp b/src/mame/drivers/gkigt.cpp
index ee2a2b2a637..44254b69912 100644
--- a/src/mame/drivers/gkigt.cpp
+++ b/src/mame/drivers/gkigt.cpp
@@ -86,7 +86,7 @@ PCB board that connects to 044 boards via J6 & J7
or 039 EPROM + SIMM software
More chips (from eBay auction):
- 2x Phillips / NXT 28C94 quad UART (8 serial channels total)
+ 2x Philips / NXT 28C94 quad UART (8 serial channels total)
ADV476 256 color RAMDAC
*/
diff --git a/src/mame/drivers/tecnbras.cpp b/src/mame/drivers/tecnbras.cpp
index 0af732566d4..a7c1dbb964b 100644
--- a/src/mame/drivers/tecnbras.cpp
+++ b/src/mame/drivers/tecnbras.cpp
@@ -119,7 +119,7 @@ void tecnbras_state::tecnbras(machine_config &config)
m_maincpu->set_addrmap(AS_IO, &tecnbras_state::i80c31_io);
m_maincpu->port_out_cb<1>().set_nop(); // buzzer ?
-/* TODO: Add an I2C RTC (Phillips PCF8583P)
+/* TODO: Add an I2C RTC (Philips PCF8583P)
pin 6 (SCL): cpu T0/P3.4 (pin 14)
pin 5 (SDA): cpu T1/P3.5 (pin 15)
*/
diff --git a/src/mame/machine/kc_keyb.cpp b/src/mame/machine/kc_keyb.cpp
index 37c1beb7397..5fceb7fc8f9 100644
--- a/src/mame/machine/kc_keyb.cpp
+++ b/src/mame/machine/kc_keyb.cpp
@@ -42,7 +42,7 @@ The keyboard of the KC is driven by a remote control circuit that is
originally designed for infrared remote control. This one was named
U807 and I learned there should be a similar chip called SAB 3021
available but I never found the specs on the web. The SAB 3021 was
-produced by Valvo which doesn't exist anymore (bought by Phillips
+produced by Valvo which doesn't exist anymore (bought by Philips
if I remember correctly). If you have more luck finding the specs
I'm still interested.
There also was a complementary chip for the receiving side but that