diff options
author | Miodrag Milanovic <mmicko@gmail.com> | 2015-11-08 12:56:12 +0100 |
---|---|---|
committer | Miodrag Milanovic <mmicko@gmail.com> | 2015-11-08 12:56:12 +0100 |
commit | 7c19aac60e12d6f5ea301bdb34d7826a01e0b06f (patch) | |
tree | f310d86aa2c6bfc19d115307dedde4eb0cd52dad /src/mame/drivers/jubilee.c | |
parent | a57b46ae933badd7441ce1644711dbb851e2b504 (diff) |
Rename *.c -> *.cpp in our source (nw)
Diffstat (limited to 'src/mame/drivers/jubilee.c')
-rw-r--r-- | src/mame/drivers/jubilee.c | 710 |
1 files changed, 0 insertions, 710 deletions
diff --git a/src/mame/drivers/jubilee.c b/src/mame/drivers/jubilee.c deleted file mode 100644 index c725146b878..00000000000 --- a/src/mame/drivers/jubilee.c +++ /dev/null @@ -1,710 +0,0 @@ -// license:BSD-3-Clause -// copyright-holders:Roberto Fresca -/**************************************************************************************** - - Jubilee Double-Up Poker - ----------------------- - - Driver by Roberto Fresca. - - - Games running on this hardware: - - * Double-Up Poker (Jubilee), 1985, Jubilee. - - -***************************************************************************************** - - You can find more about this game and the emulation evolution at - http://www.robertofresca.com.ar/ - -***************************************************************************************** - - Hardware Notes: - --------------- - - PCB etched: - - HERBER LTD - Jubilee Sales Pty Ltd. - BD No V63-261 ISS1. - - 1x TMS9980 CPU. - 1x MC6845P CRTC. - - 1x TC5517AP-2 (2048 words x 8 bits Asynchronous CMOS Static RAM), tied to a battery. - 1x 2114 (1024 words x 4 bits RAM). - - 3x 2732 labelled 1, 2 and 3. - 3x 2764 labelled Red, Blue and Green (the last one also has '22-3-85'). - - 1x 6.0 MHz crystal. - 1x Panasonic BR-2/3A lithium battery (3V, 1200 mAh). - - - From some forums... - - The memory chips on board are the toshiba TC5517ap powered via the Lithium cell and - the 2114 find the 74148 or 74ls148, all 9980 cpu's use one, pin3 will generate a reset. - The 5517 ram is compatible with 6116 or 2018. - - The 9980 has 3 interupt inputs, but they are binary. - The ls148 encodes the interupts to the cpu - the highest interupt is reset. - - I tried pulling pin 3 of the 74ls148 low and yes, this sets up the reset interupt - on pins 23, 24 and 25. The TC5517 checks out ok as a 6116. - - The crystal seems ok and this clock makes it throught to pin 34 of the MPU. - I was expecting that PHASE 03 - pin 22, should be clocking, but it simply sits at 5v. - - -***************************************************************************************** - - *** Game Notes *** - - Just insert coins, and play. You can win up to 500 credits! :) - - A default NVRAM is provided. Without it, the game stucks at boot with a memory error - screen. If this happens, press the key 9 (Attendant). The game will initialize the NVRAM - and then boots OK. - - The RESET service button (key R) is just for clean credits purposes. - - The Supervisor Key (Key 0), brings a menu for bookkeeping, and replay (still can't see - the point). The key behaves like a real lock key, with off/on status. - - From the marquee: 'ALL CREDITS REDEEMABLE IN LIQUOR ONLY. NO CASH PAYMENTS' - So we can assume that is *exclusive* for amusement. - - From the marquee: 'MINIMUM REDEMPTION: 30 CREDITS' (to redeem LESS THAN 30 CREDITS, - Player must insert coins to bring total Credits to 30). - - Ok... you need to have 30 or more credits to redeem. Otherwise you oddly need to insert - more coins to reach the minimum of 30 Credits. - - To redeem credits (30 or more!): - 1) Press the Hand Pay button (key 8). You'll get the 'Call Attendant' blinking message. - 2) Press the Attendant button (key 9). You'll get a new message at bottom-left of the - screen about the amount of credits to pay. - 3) Turn ON/OFF the Supervisor key (key 0). It will clear the credits, with a new message - at bottom-left of the screen about of value paid. - - - Paytable: Play 1 to 5 coins.... - - +----------------+--------+--------+--------+--------+--------+ - | Hand | 1 Coin | 2 Coin | 3 Coin | 4 Coin | 5 Coin | - +----------------+--------+--------+--------+--------+--------+ - | Royal Flush | 100 | 200 | 300 | 400 | 500 | - | Straight Flush | 70 | 140 | 210 | 280 | 350 | - | 4 of a Kind | 40 | 80 | 120 | 160 | 200 | - | Full House | 10 | 20 | 30 | 40 | 50 | - | Flush | 7 | 14 | 21 | 28 | 35 | - | Straight | 5 | 10 | 15 | 20 | 25 | - | 3 of a Kind | 3 | 6 | 9 | 12 | 15 | - | 2 Pair | 2 | 4 | 6 | 8 | 10 | - | Pair Aces | 1 | 2 | 3 | 4 | 5 | - +----------------+--------+--------+--------+--------+--------+ - - -***************************************************************************************** - - -------------------- - *** Memory Map *** - -------------------- - - 0000-2FFF ; ROM space. - 3000-33FF ; Video RAM. ----------> First half of TC5517AP battery backed RAM. - 3400-37FF ; Working RAM. ----------> Second half of TC5517AP battery backed RAM. - 3800-3BFF ; Color (ATTR) RAM. -----> Whole 2114 RAM. - 3E00-3E03 ; CRT Controller. -------> MC6845P. - - CRU... - - 0080-0080 ; Unknown Read. Maybe a leftover. - 00C8-00C8 ; Multiplexed Input Port. - 0CC2-0CC6 ; Input Port mux selectors. - 0CD0-0CD4 ; Lamps. - 0CE2-0CE2 ; Clear Interrupts line. - - - TMS9980A memory map: - - 0000-0003 ---> Reset - 0004-0007 ---> Level 1 - 0008-000B ---> Level 2 - 000C-000F ---> Level 3 - 0010-0013 ---> Level 4 - - 3FFC-3FFF ---> Load - - -***************************************************************************************** - - DRIVER UPDATES: - - - [2014-02-19] - - - Added a default clean NVRAM. - - Found and implemented the credits input. - The game is now working!. Still no sound. - - [2014-02-17] - - - Demuxed the input system. - - Hooked an cleaned all inputs, except the coin in (missing). - - Added NVRAM support. - - Hooked CRTC properly. - - Adjusted the screen size and visible area according to CRTC values. - - Adjusted the screen pos 8 pixels, to get a bit centered. - - Fixed palette to 8 colors. - - Added technical notes. - - [2014-02-17] - - - Corrected the crystal value and derivate clocks via #DEFINE. - - Improved memory map. - - Hooked the CRT controller, but the init sequence seems incomplete. - - Created the accurate graphics banks. - - Found and mapped the video RAM. - - Hooked the ATTR RAM. - - Assigned the correct graphics banks to the proper drawn tiles. - - Find and mapped an input port. - - Started a preliminary workaround to demux the input port. - - Added technical notes. - - [2010-09-05] - - - Initial release. - - Decoded graphics. - - Proper tile colors. - - Hooked the correct CPU. - - Preliminary memory map. - - Added technical notes. - - - TODO: - - - Analize the remaining CRU writes. - - Discrete sound?. - - Check clocks on a PCB (if someday appear one!) - - -****************************************************************************************/ - -#define MASTER_CLOCK XTAL_6MHz /* confirmed */ -#define CPU_CLOCK (MASTER_CLOCK / 2) /* guess */ -#define CRTC_CLOCK (MASTER_CLOCK / 8) /* guess */ - -#include "emu.h" -#include "cpu/tms9900/tms9980a.h" -#include "video/mc6845.h" -#include "machine/nvram.h" - - -class jubilee_state : public driver_device -{ -public: - jubilee_state(const machine_config &mconfig, device_type type, const char *tag) - : driver_device(mconfig, type, tag), - m_videoram(*this, "videoworkram"), - m_colorram(*this, "colorram"), - m_maincpu(*this, "maincpu"), - m_gfxdecode(*this, "gfxdecode") { } - - UINT8 mux_sel; - UINT8 muxlamps; - - required_shared_ptr<UINT8> m_videoram; - required_shared_ptr<UINT8> m_colorram; - tilemap_t *m_bg_tilemap; - DECLARE_WRITE8_MEMBER(jubileep_videoram_w); - DECLARE_WRITE8_MEMBER(jubileep_colorram_w); - DECLARE_READ8_MEMBER(unk_r); - DECLARE_WRITE8_MEMBER(unk_w); - DECLARE_READ8_MEMBER(mux_port_r); - TILE_GET_INFO_MEMBER(get_bg_tile_info); - virtual void video_start(); - UINT32 screen_update_jubileep(screen_device &screen, bitmap_ind16 &bitmap, const rectangle &cliprect); - INTERRUPT_GEN_MEMBER(jubileep_interrupt); - required_device<cpu_device> m_maincpu; - required_device<gfxdecode_device> m_gfxdecode; -}; - - -/************************* -* Video Hardware * -*************************/ - -WRITE8_MEMBER(jubilee_state::jubileep_videoram_w) -{ - m_videoram[offset] = data; - m_bg_tilemap->mark_tile_dirty(offset); -} - -WRITE8_MEMBER(jubilee_state::jubileep_colorram_w) -{ - m_colorram[offset] = data; - m_bg_tilemap->mark_tile_dirty(offset); -} - - -TILE_GET_INFO_MEMBER(jubilee_state::get_bg_tile_info) -{ -/* - bits - (attr for gfx banks 00-03) - 7654 3210 - <no> --xx bank select. - <no> xx-- seems unused. -*/ - int attr = m_colorram[tile_index]; - int code = m_videoram[tile_index]; - int bank = (attr & 0x03); - int color = 0; /* fixed colors: one rom for each R, G and B. */ - - SET_TILE_INFO_MEMBER(bank, code, color, 0); -} - - -void jubilee_state::video_start() -{ - m_bg_tilemap = &machine().tilemap().create(m_gfxdecode, tilemap_get_info_delegate(FUNC(jubilee_state::get_bg_tile_info), this), TILEMAP_SCAN_ROWS, 8, 8, 32, 32); - m_bg_tilemap->set_scrolldx(8, 0); /* guess */ -} - -UINT32 jubilee_state::screen_update_jubileep(screen_device &screen, bitmap_ind16 &bitmap, const rectangle &cliprect) -{ - m_bg_tilemap->draw(screen, bitmap, cliprect, 0, 0); - return 0; -} - - -/************************** -* Read / Write Handlers * -**************************/ - -INTERRUPT_GEN_MEMBER(jubilee_state::jubileep_interrupt) -{ - m_maincpu->set_input_line(INT_9980A_LEVEL1, ASSERT_LINE); -} - - -/************************* -* Memory Map Information * -*************************/ - -static ADDRESS_MAP_START( jubileep_map, AS_PROGRAM, 8, jubilee_state ) - ADDRESS_MAP_GLOBAL_MASK(0x3fff) - AM_RANGE(0x0000, 0x2fff) AM_ROM - -/* Video RAM = 3000-33FF - Working RAM = 3400-37FF - Color RAM = 3800-3BFF (lower 4-bits) -*/ - AM_RANGE(0x3000, 0x37ff) AM_RAM AM_WRITE(jubileep_videoram_w) AM_SHARE("videoworkram") /* TC5517AP battery backed RAM */ - AM_RANGE(0x3800, 0x3bff) AM_RAM AM_WRITE(jubileep_colorram_w) AM_SHARE("colorram") /* Whole 2114 RAM */ - -/* CRTC *is* mapped here. Read 00-01 and then write on them. - Then does the same for 02-03. Initialization seems incomplete since - set till register 0x0D. Maybe the last registers are unused. -*/ - AM_RANGE(0x3e00, 0x3e01) AM_DEVREADWRITE("crtc", mc6845_device, status_r, address_w) - AM_RANGE(0x3e02, 0x3e03) AM_DEVREADWRITE("crtc", mc6845_device, register_r, register_w) - -/* CRTC address: $3E01; register: $3E03 - CRTC registers: 2f 20 25 64 26 00 20 23 00 07 00 00 00 - screen total: (0x2f+1)*8 (0x26+1)*(0x07+1) ---> 384 x 312 - visible area: 0x20 0x20 ---------------------> 256 x 256 -*/ -ADDRESS_MAP_END - - -WRITE8_MEMBER(jubilee_state::unk_w) -{ -/* In particular, the interrupt from above must be cleared. We assume that - this is done by one of the output lines, and from the 32 lines that are - set right after an interrupt is serviced, all are set to 0, and only one - is set to one. Maybe this one clears the interrupt. - TODO: Check the schematics. -*/ - if (((offset<<1)==0x0ce2)&&(data==1)) - { - m_maincpu->set_input_line(INT_9980A_LEVEL1, CLEAR_LINE); - } - -/* Inputs Multiplexion... - - Should be 0CC0 added as selector? - Was tested and didn't see any input driven by its state. - This doesn't mean that couln't be possible. -*/ - - if (((offset<<1)==0x0cc2)&&(data==1)) - { - mux_sel = 1; - } - - if (((offset<<1)==0x0cc4)&&(data==1)) - { - mux_sel = 2; - } - - if (((offset<<1)==0x0cc6)&&(data==1)) - { - mux_sel = 3; - } - - -/* Lamps, sounds and other writes: - - 0CD0 = HOLD3 lamp. - 0CD2 = HOLD2 lamp. - 0CD4 = HOLD1 lamp. - - Can't find more. Could be a kind of multiplexion. - The input selectors don't seems to be completely involved, - but 0CC6 is set to 1 when hold 1-2-3 turn on, thing that - could be normal due to the end value for the state routine. - - Writes to analize: - 0CC0 (write too often... maybe input selector) - 0CCC (write a bit less often...) - - 0CE6 = could be either a 'Insert Coin' lamp, - or coin lockout (inverted), since is active - low during the game. when the game is over, - is set to 1. - - Also... - - Pressing cancel ---> writes 1 to 0CE8 - Pressing bet ------> writes 1 to 0CEA - Pressing hold4 ----> writes 1 to 0CEC - Pressing hold5 ----> writes 1 to 0CEE - Pressing hand pay -> writes 1 to 0CF0 - Pressing hold1 ----> writes 1 to 0CF2 - Pressing hold2 ----> writes 1 to 0CF4 - Pressing hold3 ----> writes 1 to 0CF6 - Pressing reset ----> writes 1 to 0CF8 - Pressing deal -----> writes 1 to 0D00 - - (See below, in sound writes...) -*/ - - if (((offset<<1)==0x0ccc)&&(data==1)) - { - muxlamps = 1; - } - if (((offset<<1)==0x0ccc)&&(data==0)) - { - muxlamps = 2; - } - -/* the following structure has 3 states, because I tested the inputs - selectors 0CC2-0CC4-0CC6 as lamps multiplexers unsuccessfuly. -*/ - if (((offset<<1)==0x0cd0)&&(data==1)) - { - if (muxlamps == 1) - { - output_set_lamp_value(0, (data & 1)); /* lamp */ - logerror("CRU: LAAAAAAMP 0 write to address %04x: %d\n", offset<<1, data & 1); -// popmessage("LAMP 0"); - } - if (muxlamps == 2) - { - output_set_lamp_value(3, (data & 1)); /* lamp */ - logerror("CRU: LAAAAAAMP 3 write to address %04x: %d\n", offset<<1, data & 1); -// popmessage("LAMP 3"); - } - if (muxlamps == 3) - { - output_set_lamp_value(6, (data & 1)); /* lamp */ - logerror("CRU: LAAAAAAMP 6 write to address %04x: %d\n", offset<<1, data & 1); -// popmessage("LAMP 6"); - } - } - - if (((offset<<1)==0x0cd2)&&(data==1)) - { - if (muxlamps == 1) - { - output_set_lamp_value(1, (data & 1)); /* lamp */ - logerror("CRU: LAAAAAAMP 1 write to address %04x: %d\n", offset<<1, data & 1); -// popmessage("LAMP 1"); - } - if (muxlamps == 2) - { - output_set_lamp_value(4, (data & 1)); /* lamp */ - logerror("CRU: LAAAAAAMP 4 write to address %04x: %d\n", offset<<1, data & 1); -// popmessage("LAMP 4"); - } - if (muxlamps == 3) - { - output_set_lamp_value(7, (data & 1)); /* lamp */ - logerror("CRU: LAAAAAAMP 7 write to address %04x: %d\n", offset<<1, data & 1); -// popmessage("LAMP 7"); - } - } - - if (((offset<<1)==0x0cd4)&&(data==1)) - { - if (muxlamps == 1) - { - output_set_lamp_value(2, (data & 1)); /* lamp */ - logerror("CRU: LAAAAAAMP 2 write to address %04x: %d\n", offset<<1, data & 1); -// popmessage("LAMP 2"); - } - if (muxlamps == 2) - { - output_set_lamp_value(5, (data & 1)); /* lamp */ - logerror("CRU: LAAAAAAMP 5 write to address %04x: %d\n", offset<<1, data & 1); -// popmessage("LAMP 5"); - } - if (muxlamps == 3) - { - output_set_lamp_value(8, (data & 1)); /* lamp */ - logerror("CRU: LAAAAAAMP 8 write to address %04x: %d\n", offset<<1, data & 1); -// popmessage("LAMP 8"); - } - } - -/* Sound writes?... - - In case of discrete circuitry, the following writes - could be the trigger for each sound. - - Pressing cancel ---> writes 1 to 0CE8 - Pressing bet ------> writes 1 to 0CEA - Pressing hold4 ----> writes 1 to 0CEC - Pressing hold5 ----> writes 1 to 0CEE - Pressing hand pay -> writes 1 to 0CF0 - Pressing hold1 ----> writes 1 to 0CF2 - Pressing hold2 ----> writes 1 to 0CF4 - Pressing hold3 ----> writes 1 to 0CF6 - Pressing reset ----> writes 1 to 0CF8 - Pressing deal -----> writes 1 to 0D00 -*/ - - if (((offset<<1)==0x0ce8)&&(data==1)) - { - logerror("CRU: SOUND 'CANCEL' write to address %04x: %d\n", offset<<1, data & 1); -// popmessage("SOUND 'CANCEL': %04x", offset<<1); - } - - if (((offset<<1)==0x0cea)&&(data==1)) - { - logerror("CRU: SOUND 'BET' write to address %04x: %d\n", offset<<1, data & 1); -// popmessage("SOUND 'BET': %04x", offset<<1); - } - - if (((offset<<1)==0x0cec)&&(data==1)) - { - logerror("CRU: SOUND 'HOLD4' write to address %04x: %d\n", offset<<1, data & 1); -// popmessage("SOUND 'HOLD 4': %04x", offset<<1); - } - - if (((offset<<1)==0x0cee)&&(data==1)) - { - logerror("CRU: SOUND 'HOLD5' write to address %04x: %d\n", offset<<1, data & 1); -// popmessage("SOUND 'HOLD 5': %04x", offset<<1); - } - - if (((offset<<1)==0x0cf0)&&(data==1)) - { - logerror("CRU: SOUND 'HAND PAY' write to address %04x: %d\n", offset<<1, data & 1); -// popmessage("SOUND 'HAND PAY': %04x", offset<<1); - } - - if (((offset<<1)==0x0cf2)&&(data==1)) - { - logerror("CRU: SOUND 'HOLD1' write to address %04x: %d\n", offset<<1, data & 1); -// popmessage("SOUND 'HOLD 1': %04x", offset<<1); - } - - if (((offset<<1)==0x0cf4)&&(data==1)) - { - logerror("CRU: SOUND 'HOLD2' write to address %04x: %d\n", offset<<1, data & 1); -// popmessage("SOUND 'HOLD 2': %04x", offset<<1); - } - - if (((offset<<1)==0x0cf6)&&(data==1)) - { - logerror("CRU: SOUND 'HOLD3' write to address %04x: %d\n", offset<<1, data & 1); -// popmessage("SOUND 'HOLD 3': %04x", offset<<1); - } - - if (((offset<<1)==0x0cf8)&&(data==1)) - { - logerror("CRU: SOUND 'RESET' write to address %04x: %d\n", offset<<1, data & 1); -// popmessage("SOUND 'RESET': %04x", offset<<1); - } - - if (((offset<<1)==0x0d00)&&(data==1)) - { - logerror("CRU: SOUND 'DEAL' write to address %04x: %d\n", offset<<1, data & 1); -// popmessage("SOUND 'DEAL': %04x", offset<<1); - } - - - /* for debug purposes */ - - logerror("CRU write to address %04x: %d\n", offset<<1, data & 1); -} - -READ8_MEMBER(jubilee_state::mux_port_r) -{ - switch( mux_sel ) - { - case 0x01: return ioport("IN0")->read(); - case 0x02: return ioport("IN1")->read(); /* muxed credits input is here! */ - case 0x03: return ioport("IN2")->read(); - } - - return 0xff; -} - - -static ADDRESS_MAP_START( jubileep_cru_map, AS_IO, 8, jubilee_state ) - AM_RANGE(0x00c8, 0x00c8) AM_READ(mux_port_r) /* multiplexed input port */ - AM_RANGE(0x0000, 0x0fff) AM_WRITE(unk_w) -ADDRESS_MAP_END - -/* I/O byte R/W - - 0x080 R ; Input port? Polled once at beginning. - 0x0C8 R ; Input port. - - Can't see more inputs. There is a multiplexion with the following offsets as selectors: - 0xCC2 / 0xCC4 / 0xCC6. - - 0xCC4 status carry the coin input state. - -*/ - -/************************* -* Input Ports * -*************************/ - -static INPUT_PORTS_START( jubileep ) - PORT_START("IN0") - PORT_BIT( 0x01, IP_ACTIVE_HIGH, IPT_POKER_CANCEL ) PORT_NAME("Cancel / Take") - PORT_BIT( 0x02, IP_ACTIVE_HIGH, IPT_GAMBLE_BET ) PORT_NAME("Bet / Gamble") - PORT_BIT( 0x04, IP_ACTIVE_HIGH, IPT_POKER_HOLD4 ) PORT_NAME("Hold 4 / Half Gamble") - PORT_BIT( 0x08, IP_ACTIVE_HIGH, IPT_POKER_HOLD5 ) PORT_NAME("Hold 5 / Red") - PORT_BIT( 0x10, IP_ACTIVE_HIGH, IPT_SERVICE ) PORT_NAME("Hand Pay") PORT_CODE(KEYCODE_8) - PORT_BIT( 0x20, IP_ACTIVE_HIGH, IPT_POKER_HOLD1 ) PORT_NAME("Hold 1 / Black") - PORT_BIT( 0x40, IP_ACTIVE_HIGH, IPT_POKER_HOLD2 ) PORT_NAME("Hold 2") - PORT_BIT( 0x80, IP_ACTIVE_HIGH, IPT_POKER_HOLD3 ) PORT_NAME("Hold 3") - - PORT_START("IN1") -/* Don't know if this needs a custom port. Bits 0 and 1 together are the credits input. - Bit 1 alone could be "Attendant Paid Status (reset)" that does a reset and update the - paid status, or just is for edge coin-in timeouts... Impossible to say without a PCB. -*/ - PORT_BIT( 0x03, IP_ACTIVE_HIGH, IPT_COIN1 ) PORT_IMPULSE (2) -// PORT_BIT( 0x02, IP_ACTIVE_HIGH, IPT_SERVICE ) PORT_NAME("Attendant Paid Status (reset)") PORT_CODE(KEYCODE_7) - PORT_BIT( 0x04, IP_ACTIVE_HIGH, IPT_UNKNOWN ) - PORT_BIT( 0x08, IP_ACTIVE_HIGH, IPT_UNKNOWN ) - PORT_BIT( 0x10, IP_ACTIVE_HIGH, IPT_UNKNOWN ) - PORT_BIT( 0x20, IP_ACTIVE_HIGH, IPT_UNKNOWN ) - PORT_BIT( 0x40, IP_ACTIVE_HIGH, IPT_SERVICE ) PORT_CODE(KEYCODE_9) PORT_NAME("Attendant (to pass the memory error and hand pay)") - PORT_BIT( 0x80, IP_ACTIVE_HIGH, IPT_SERVICE ) PORT_CODE(KEYCODE_0) PORT_NAME("Supervisor Key (Bookkeeping)") PORT_TOGGLE - - PORT_START("IN2") - PORT_BIT( 0x01, IP_ACTIVE_HIGH, IPT_SERVICE ) PORT_CODE(KEYCODE_R) PORT_NAME("Reset") - PORT_BIT( 0x02, IP_ACTIVE_HIGH, IPT_UNKNOWN ) - PORT_BIT( 0x04, IP_ACTIVE_HIGH, IPT_UNKNOWN ) - PORT_BIT( 0x08, IP_ACTIVE_HIGH, IPT_UNKNOWN ) - PORT_BIT( 0x10, IP_ACTIVE_HIGH, IPT_START1 ) PORT_NAME("Deal / Start") - PORT_BIT( 0x20, IP_ACTIVE_HIGH, IPT_UNKNOWN ) - PORT_BIT( 0x40, IP_ACTIVE_HIGH, IPT_UNKNOWN ) - PORT_BIT( 0x80, IP_ACTIVE_HIGH, IPT_UNKNOWN ) - -INPUT_PORTS_END - - -/************************* -* Graphics Layouts * -*************************/ - -static const gfx_layout tilelayout = -{ - 8, 8, - 0x100, - 3, - { RGN_FRAC(2,3), RGN_FRAC(1,3), 0 }, /* bitplanes are separated */ - { 0, 1, 2, 3, 4, 5, 6, 7 }, - { 0*8, 1*8, 2*8, 3*8, 4*8, 5*8, 6*8, 7*8 }, - 8*8 -}; - - -/****************************** -* Graphics Decode Information * -******************************/ - -static GFXDECODE_START( jubileep ) /* 4 different graphics banks */ - GFXDECODE_ENTRY( "gfx1", 0, tilelayout, 0, 1 ) - GFXDECODE_ENTRY( "gfx1", 0x0800, tilelayout, 0, 1 ) - GFXDECODE_ENTRY( "gfx1", 0x1000, tilelayout, 0, 1 ) - GFXDECODE_ENTRY( "gfx1", 0x1800, tilelayout, 0, 1 ) -GFXDECODE_END - - -/************************* -* Machine Drivers * -*************************/ - -static MACHINE_CONFIG_START( jubileep, jubilee_state ) - - // Main CPU TMS9980A, no line connections. - MCFG_TMS99xx_ADD("maincpu", TMS9980A, CPU_CLOCK, jubileep_map, jubileep_cru_map) - MCFG_CPU_VBLANK_INT_DRIVER("screen", jubilee_state, jubileep_interrupt) - - MCFG_NVRAM_ADD_0FILL("videoworkram") - - /* video hardware */ - MCFG_SCREEN_ADD("screen", RASTER) - MCFG_SCREEN_REFRESH_RATE(60) - MCFG_SCREEN_VBLANK_TIME(ATTOSECONDS_IN_USEC(0)) - MCFG_SCREEN_SIZE(32*8, 32*8) /* (47+1*8, 38+1*8) from CRTC settings */ - MCFG_SCREEN_VISIBLE_AREA(0*8, 32*8-1, 0*8, 32*8-1) /* (32*8, 32*8) from CRTC settings */ - MCFG_SCREEN_UPDATE_DRIVER(jubilee_state, screen_update_jubileep) - MCFG_SCREEN_PALETTE("palette") - - MCFG_GFXDECODE_ADD("gfxdecode", "palette", jubileep) - MCFG_PALETTE_ADD("palette",8) - - MCFG_MC6845_ADD("crtc", MC6845, "screen", CRTC_CLOCK) - MCFG_MC6845_SHOW_BORDER_AREA(false) - MCFG_MC6845_CHAR_WIDTH(8) -MACHINE_CONFIG_END - - -/************************* -* Rom Load * -*************************/ - -ROM_START( jubileep ) - ROM_REGION( 0x4000, "maincpu", 0 ) /* TMS9980 code */ - ROM_LOAD( "1_ic59.bin", 0x0000, 0x1000, CRC(534c81c2) SHA1(4ce1d4492de9cbbc37e5a946b1183d8e8b0ba989) ) - ROM_LOAD( "2_ic58.bin", 0x1000, 0x1000, CRC(69984028) SHA1(c919a5cb43f23a0d9e496107997c74799709b347) ) - ROM_LOAD( "3_ic57.bin", 0x2000, 0x1000, CRC(c9ae423d) SHA1(8321e3e6fd60d92202b0c7b47e2a333a567b5c22) ) - - ROM_REGION( 0x6000, "gfx1", 0 ) - ROM_LOAD( "ic47.bin", 0x0000, 0x2000, CRC(55dc8482) SHA1(53f22bd66e5fcad5e2397998bc58109c3c19af96) ) /* red */ - ROM_LOAD( "ic48.bin", 0x2000, 0x2000, CRC(a687ec96) SHA1(6a3e0d3796a1505c6d68a9194e9b2b4ef8df5649) ) /* green */ - ROM_LOAD( "ic49.bin", 0x4000, 0x2000, CRC(3e0bc116) SHA1(613c57f0a8baaaa4a04c243a3a139983fa7854e5) ) /* blue */ - - ROM_REGION( 0x0800, "videoworkram", 0 ) /* default NVRAM */ - ROM_LOAD( "jubileep_videoworkram.bin", 0x0000, 0x0800, CRC(595bf2b3) SHA1(ae311873b15d8cebfb6ef6a80f27fafc9544178c) ) -ROM_END - - -/************************* -* Game Drivers * -*************************/ - -/* YEAR NAME PARENT MACHINE INPUT STATE INIT ROT COMPANY FULLNAME FLAGS */ -GAME( 1985, jubileep, 0, jubileep, jubileep, driver_device, 0, ROT0, "Jubilee", "Double-Up Poker (Jubilee)", MACHINE_NO_SOUND ) |