summaryrefslogtreecommitdiffstatshomepage
diff options
context:
space:
mode:
author Guru <mr-t-guru@users.noreply.github.com>2015-08-23 19:10:32 +0800
committer Guru <mr-t-guru@users.noreply.github.com>2015-08-23 19:10:32 +0800
commit6a461218bd1d7d470a9de44da926dbf02f748065 (patch)
tree4ec1c0b3d6ac55f0269faa5d62a733d7b7330102
parenta7b945eda6d2476da11b20de21dc1d930f7ca9ff (diff)
namcops2.c: added h/w info for first version of System 246
-rw-r--r--src/mame/drivers/namcops2.c374
1 files changed, 374 insertions, 0 deletions
diff --git a/src/mame/drivers/namcops2.c b/src/mame/drivers/namcops2.c
index b503ceb2765..e9cb86f7e21 100644
--- a/src/mame/drivers/namcops2.c
+++ b/src/mame/drivers/namcops2.c
@@ -80,6 +80,380 @@ List of Namco System 256 Games
List of System Super 256 Games
* Time Crisis 4 (Namco, 2006)
+
+Namco System 246 readme (earliest type using standard PS2 main board)
+-----------------------
+The info below covers the first version of Namco System 246 hardware used with
+games including Ridge Racer V, Wangan Midnight, Vampire Night and Bloody Roar 3.
+It uses a standard Japanese COH-H30000 Playstation 2 main board (GH-004).
+A later model Playstation 2 main board COH-H31000 (GH-006) has also been tested and works fine.
+The PS2 main board is interfaced to the Namco MOTHER PCB via a small adapter board.
+The boot ROM is inside a MagicGate security cart and plugs into the memory cart slot.
+After the boot ROM loads, some of the game data is loaded from CDROM and stored in the
+RAM32 PCB. However, the CDROM is continually accessed as the game plays.
+The CDROM drive is a TEAC CD-540E.
+
+
+PCB Layouts
+===========
+
+Namco Interface Board (1st version)
+---------------------
+This PCB is used with Ridge Racer V and Wangan Midnight.
+
+System 246 MOTHER PCB
+8908960202 (8908970202)
+|------------------------------------------------------------------------------|
+|J1 ADM485 Ti6734 |------| J12 |
+| 6358N TMP95C061 | C448 | |
+| MAX232 | | |
+|J2 |------| |
+| CY7C199 |
+| K4S281632 |
+| CXA2055P K4S281632 |
+| J11 |
+|J3 66.666MHz |
+| J13 |--------| J10 |
+| EPM3128 |ALTERA | |
+| |EP20K100E |
+|J4 LC35256 |QC208 | |
+| |--------| |
+| |
+| |
+| J6 |
+| |
+|J5 BATTERY PQ30RV31 |
+| J7 J8 J9 |
+|------------------------------------------------------------------------------|
+Notes:
+ J1 - USB connector (not used)
+ J2 - Two RCA jacks for stereo audio output
+ J3/J4 - DSUB15 VGA output connectors
+ J5 - 3-pin connector (joins to V257 STR PCB to J104)
+ J6 - Multi-pin connector (PS2 interface adapter plugged in here)
+ J7 - Playstation 2 video cable connector (input)
+ J8 - 2-pin power connector (+5V input)
+ J9 - 40-pin IDE flat cable connector for CDROM drive
+ J10 - Multi-pin connector (this is the same as the J9 connector on the 2nd version, not used)
+ J11 - Multi-pin connector (RAM32 PCB plugged in here, same as J10 on 2nd version)
+ J12 - Multi-pin connector (this is the same as the J8 connector on the 2nd version, not used)
+ J13 - 6-pin connector for programming EPM3128 CPLD (not populated)
+TMP95C061 - Toshiba TMP95C061 TLCS-900-series 16-bit Microcontroller (internal RAM/ROM = none)
+ C448 - Namco Custom C448
+ EPM3128 - Altera MAX EMP3128ATC100-10 CPLD labelled 'P2AMO1'
+ CXA2055P - Sony CXA2055P Video Amplifier IC
+ Ti6734 - Texas Instruments LMH6734 Single Supply, Ultra High-Speed, Triple Selectable Gain Buffer
+ 6358N - Sanyo 6358N High-Performance Dual Operational Amplifier
+ PQ30RV31 - Sharp PQ30RV31 Voltage Regulator
+ CY7C199 - Cypress CY7C199-15VC 32k x8-bit SRAM
+ LC35256 - Sanyo LC35256DM70 32k x8-bit SRAM
+ EP20K100 - Altera APEX EP20K100EQC208-2X FPGA
+K4S281632 - Samsung K4S281632B-TC1H 8M x16-bit SDRAM
+ ADM485 - Analog Devices ADM485 5V Low Power EIA RS-485 Transceiver
+ MAX232 - Maxim MAX232 dual serial to TTL logic level driver/receiver
+
+
+Namco Interface Board (2nd version)
+---------------------
+This PCB is used with Bloody Roar 3 and Vampire Night.
+
+System 246 MOTHER(A) PCB
+8908961500 (8908971500)
+|------------------------------------------------------------------------------|
+| |------| BATTERY |
+| J2 TMP95C061 | C448 | |
+|J1 | | LC35256 |
+| |------| K4S281632 |
+| 66.666MHz K4S281632 |
+| J11 CY7C199 |
+| EPM3128 |--------| J10 |
+| |ALTERA | |
+| |EP20K100E |
+| |QC208 | J9 |
+| |--------| |
+| Ti6734 |
+| |
+| SP232EET 6358N |
+| |
+|J3 J4 J8 |
+| |
+| CXA2055P |
+| PQ30RV31 |
+| J5 J6 J7 |
+|------------------------------------------------------------------------------|
+Notes:
+ J1 - USB connector (not used for Bloody Roar 3)
+ J2 - I/O board connector
+ J3 - PAC PCB connector
+ J4 - Multi-pin connector (PS2 interface adapter plugged in here)
+ J5 - 2-pin power connector (+5V input)
+ J6 - Playstation 2 video cable connector (input)
+ J7 - 40-pin IDE flat cable connector for CDROM drive
+ J8 - Multi-pin connector labelled 'ROM' (not used)
+ J9 - Multi-pin connector labelled 'RAM2' (not used)
+ J10 - Multi-pin connector labelled 'RAM1' (RAM32 PCB plugged in here)
+ J11 - 6-pin connector for programming EPM3128 CPLD (not populated)
+TMP95C061 - Toshiba TMP95C061 TLCS-900-series 16-bit Microcontroller (internal RAM/ROM = none)
+ C448 - Namco Custom C448
+ EPM3128 - Altera MAX EMP3128ATC100-10 CPLD labelled 'P2AMO1'
+ CXA2055P - Sony CXA2055P Video Amplifier IC
+ Ti6734 - Texas Instruments LMH6734 Single Supply, Ultra High-Speed, Triple Selectable Gain Buffer
+ 6358N - Sanyo 6358N High-Performance Dual Operational Amplifier
+ PQ30RV31 - Sharp PQ30RV31 Voltage Regulator
+ CY7C199 - Cypress CY7C199-15VC 32k x8-bit SRAM
+ LC35256 - Sanyo LC35256DM70 32k x8-bit SRAM
+ EP20K100 - Altera APEX EP20K100EQC208-2X FPGA
+K4S281632 - Samsung K4S281632B-TC1H 8M x16-bit SDRAM
+
+
+Add-on Memory Board (plugs into J10 on MOTHER(A) PCB)
+-------------------
+This PCB is used with Bloody Roar 3, Vampire Night, Ridge Racer V and Wangan Midnight.
+
+System246 RAM32 PCB
+8908960400 (8908970400)
+|--------------|
+|K4S281632 |
+|K4S281632 |
+| J1 |
+|--------------|
+Notes:
+ K4S281632 - Samsung K4S281632B-TC1H 8M x16-bit SDRAM
+ J1 - Multi-pin connector
+
+
+PS2 Adapter Board
+-----------------
+This PCB is used with Bloody Roar 3, Vampire Night, Ridge Racer V and Wangan Midnight.
+
+System246 T004 PCB
+8908960501 (8908970501)
+|----------------|
+| *J1 |
+| J2 |
+|----------------|
+Notes:
+ J1 - Multi-pin connector (*located on other side of PCB, plugs into J4 on MOTHER(A) PCB)
+ J2 - Multi-pin connector (plugs into PS2 main board)
+
+
+I/O Board
+---------
+This PCB is used with Bloody Roar 3. It is bolted into the metal box and the JAMMA
+edge connector sticks out the front at 90 degrees to the front face of the metal box.
+
+System246 JAMMA PCB
+8908961601 (8908971601)
+|--------------------------------------------|
+|TLP281-4 J6 TLP281-4 LA4705 |
+| TLP281-4 |
+| EPM7064 BA3121 |
+| J5 TLP281-4 |
+| TLP281-4 TLP281-4 TLP281-4 |
+| TLP281-4 TLP281-4 VOLUME |
+|J4 J2 J1|
+|--| J3 JAMMA |-------------|
+ |---------------------------|
+Notes:
+ J1 - 4-pin connector for stereo audio output
+ J2 - 10-pin connector for extra buttons
+ J3 - JAMMA connector
+ J4 - 2-pin power connector for 5V
+ J5 - 6-pin connector for programming CPLD (not populated)
+ J6 - Multi-pin connector (located on other side of PCB, plugs into J2 on MOTHER(A) PCB)
+ EPM7064 - Altera MAX EPM7065STC100-10 CPLD labelled 'S246J01'
+ BA3121 - Rohm BA3121 Ground Isolation Amplifier IC
+TLP281-4 - Toshiba TLP281-4 Optocoupler
+ LA4705 - Sanyo LA4705 2-channel BTL Power Amplifier
+
+Connector J2 pinout Connector J1 pinout
+1 - GND 1 - Left +
+2 - NC 2 - Left -
+3 - P1 Button 4 3 - Right +
+4 - P1 Button 5 4 - Right -
+5 - P1 Button 6
+6 - NC
+7 - P2 Button 4
+8 - P2 Button 5
+9 - P2 Button 6
+10- GND
+
+
+Power Input/Video Output/Audio Output Board
+-------------------------------------------
+This PCB is used with Bloody Roar 3 and Vampire Night. It is bolted to the front of the metal box.
+
+System246 PAC PCB
+8908961700 (8908971700)
+ |----------------------------|
+ | G5LE-1 |
+ | |
+ | J6 J7 L1|
+|------------------------| J9 J10 |
+| J3 J4 J5 J8 L2|
+|J1 J2 SW1 |
+|-----------------------------------------------------|
+Notes:
+ J1/J2 - RCA jacks for stereo audio output (mono audio is also output from the JAMMA connector on the I/O board for Bloody Roar 3)
+ J3 - Multi-pin connector (located on other side of PCB, plugs into J3 on MOTHER(A) PCB)
+ J4 - 4-pin connector (not used)
+ J5 - 3-pin connector (not used)
+ J6/J7 - DSUB15 VGA output connectors
+ J8 - 10-pin power output connector for 5V/12V (located on other side of PCB, joins
+ to PS2 main board, MOTHER(A) PCB and CDROM drive)
+ J9 - 6-pin JVS power input connector
+ J10 - 4-pin power connector
+ G5LE-1 - Omron G5LE-1 single-pole 10A power relay (located on other side of PCB)
+ SW1 - 4-position DIP switch (all OFF)
+ L1 - Green LED (lights when 5 volts is present)
+ L2 - Blue LED (lights when 12 volts is present)
+
+
+Gun I/O Board
+---------------
+This PCB is used with Vampire Night.
+It is also used with Time Crisis 3 (on System 246C) and Crisis Zone (on System 23 Evolution2)
+
+V221 MIU PCB
+2512960101 (2512970101)
+additional sticker for Vampire Night says '8662969301 (JV) TMIU PCB'
+|---------------------------------------------|
+|J10 J9 29C020 LC35256 DSW(4) |
+| M0105 PRG.8F LED |
+|2267 6393 LED |
+| T082 T082 |------| |
+| |--------| | C78 | J8 |
+| |ALTERA | | | |
+|J11 |MAX | |------| J7|
+| LM1881 |EPM7128 | 3771 |
+|R305526 |--------| |
+| ZUW1R51212 14.746MHz |
+| ADM485 J6|
+| |
+| J1 J2 J3 J4 J5 |
+|---------------------------------------------|
+Notes:
+ 2267 - JRC2267 Current limiting diode array? (SOIC8)
+ R305526 - Some kind of mini transformer or regulator?
+ LC35256 - Sanyo LC35256 32k x8 SRAM (SOP28)
+ LM1881 - National Semiconductor LM1881 Video Sync Separator (SOIC8)
+ M0105 - Matsushita Panasonic 0105 = ? (SOIC16)
+ T082 - Texas Instruments T082 (=TL082) JFET-Input operational amplifier (SOIC8)
+ 6393 - Sanyo 6393 (LA6393) High Performance Dual Comparator (SOIC8)
+ ADM485 - Analog Devices ADM485 5V Low Power EIA RS-485 Transceiver (SOIC8)
+ 3771 - Fujitsu MB3771 Power Supply Monitor and Master Reset IC (SOIC8)
+ EPM7128 - Altera MAX EPM7128SLC84-15 PLD labelled 'TMIU1 PLD0'
+ 29C020 - location for 29C020 PLCC32 Flash/EP ROM (not populated)
+ZUW1R51212 - Cosel ZUW1R51212 DC to DC Power Supply Module (input 9-18VDC, output +-12VDC or +24VDC)
+ DSW - 4 position dipswitch block, all off
+ J1 - 6-pin power input connector
+ J2 - 12-pin connector (cabinet buttons UP/DOWN/ENTER/TEST/SERVICE/COIN etc)
+ J3 - 4 pin connector (not used)
+ J4 - 9 pin Namco female plug connector for gun (solenoid +24V/trigger/pedal/sensor)
+ J5 - 5 pin connector used for I/O --> S246 communications (connects to J1 on MOTHER(A) PCB)
+ J6 - 7-pin connector (not used)
+ J9 - 6-pin connector (not used)
+ J10 - 2-pin Namco female plug connector (not used)
+ J11 - 6-pin Namco female plug connector (video input from CCD camera)
+ PRG.8F - 27C1001 EPROM with label...
+ - 'TMIU1 PRG0B' (I/O program for Vampire Night)
+ - 'XMIU1 PRG0' (I/O program for Time Crisis 3)
+ - 'CSZ1 PRG0A' (I/O program for Crisis Zone)
+
+Note this board uses a CCD camera for the gun sensor.
+
+
+I/O Board
+---------
+This PCB is used with Ridge Racer V and Wangan Midnight.
+
+FCA PCB
+8662969102 (8662979102)
+|---------------------------------------------------|
+| J101 J106 |
+| 4.9152MHz |
+| DSW(6) |
+| LED2 |-----| |
+| | MCU | |
+| LEDS3-10 | | |
+| PIC16F84 |-----| |
+| JP1 LED1 ADM485 |
+| |
+| J102 J104 |
+|---------------------------------------------------|
+Notes:
+ J101 - 6 pin connector for power input
+ J102 - 60 pin flat cable connector
+ J104 - 5 pin connector
+ J106 - 30 pin flat cable connector
+ JP1 - 3 pin jumper, set to 'NORM'. Alt setting 'WR'
+ 3771 - Fujitsu MB3771 System Reset IC (SOIC8)
+ PIC16F84 - Microchip PIC16F84 PIC with sticker 'FCAP11' (SOIC20)
+ MCU - Fujitsu MB90F574 Microcontroller with sticker 'FCAF11' (QFP120)
+ ADM485 - Analog Devices ADM485 +5V Low Power EIA RS-485 Transceiver (SOIC8)
+
+
+Drive/Feedback Board
+--------------------
+This PCB is used with Ridge Racer V and Wangan Midnight.
+It controls the steering feed-back motor.
+When the driving games boot they test the feed-back motor by monitoring a potentiometer
+connected to the steering wheel mechanism. If the pot is faulty or not connected or if
+the drive/feedback board isn't connected (including the 110VAC input voltage), the
+steering check will fail after a time-out period and the game will not continue further.
+
+V194 STR PCB
+2487960103 (2487970103)
+Additional sticker for Ridge Racer V: 'V257 STR PCB 2553960100'
+Note this same PCB (with a different ROM) is also used with Mario Kart on Triforce hardware.
+|----------------------------------------------------------|
+| SOP44.IC16 TRANSFORMER J105 |
+| DIP42 |
+| LED N341256 FUSE |
+| LED FUSE BF150G8E|
+| N341256 |
+| |
+|RESET_SW 32MHz 7815 K2682|
+| MB3771 |
+|J101 DSW2(4, all off) |
+| MB90242A |
+| LED MB3773 HP3150 |
+| LED K2682|
+| HP3150 |
+| EPM7064 |
+|J104 MAX232 LM393 |
+| LED JP1 O O=O |
+| LED HP3150 K2682|
+| |
+| HP3150 |
+| |
+|J103 |
+| UPC358 LM393 UPC358 K2682|
+| J102 J106 |
+|----------------------------------------------------------|
+Notes:
+ SOP44.IC16 - Fujitsu MB29F400TC 512k x8 flash ROM labelled 'RRV3 STR-0A' (SOP44)
+ EPM7064 - Altera EPM7064 CPLD labelled 'STR-DR1' (PLCC44)
+ N341256 - NKK 32k x8 SRAM (SOP28)
+ K2682 - 2SK2682 N-Channel Silicon MOSFET
+ BF150G8E - Large power transistor(?) connected to the transformer
+ UPC358 - NEC uPC358 Dual operational amplifier (SOIC8)
+ LM393 - National LM393 Low Power Low Offset Voltage Dual Comparator (SOIC8)
+ MAX232 - Maxim MAX232 dual serial to TTL logic level driver/receiver (SOIC16)
+ HP3150 - HP 3150 Optocoupler (DIP8)
+ MB3773 - Fujitsu MB3773 Power Supply Monitor with Watch Dog Timer and Reset (SOIC8)
+ MB3771 - Fujitsu MB3771 System Reset IC (SOIC8)
+ DIP42 - Unpopulated DIP42 socket for 27C4096 EPROM
+ MB90242A - Fujitsu MB90242A 16-Bit CISC ROM-less F2MC-16F Family Microcontroller optimized for mechatronics control applications (TQFP80)
+ 7815 - LM7815 15V voltage regulator
+ J101 - 8 pin connector (purpose unknown)
+ J102 - 3 pin connector input from potentiometer connected to the steering wheel mechanism
+ J103 - Power input connector (5v/GND/12v)
+ J104 - 6 pin connector joined with a cable to J5 on the System 246 MOTHER PCB.
+ This cable provides the feed-back connection to/from the main board.
+ J105 - 110VAC power input
+ J106 - DC variable power output to feed-back motor
+
***************************************************************************/