summaryrefslogtreecommitdiffstatshomepage
path: root/3rdparty/softfloat3/source/extF80M_to_f32.c
diff options
context:
space:
mode:
author Vas Crabb <vas@vastheman.com>2020-10-27 12:00:36 +1100
committer Vas Crabb <vas@vastheman.com>2020-10-27 12:00:36 +1100
commit3c56452b07a41724a8d13d15a713746446291498 (patch)
treeefe4b77aa20c2ff528ee5f54848b6a41057aaa2f /3rdparty/softfloat3/source/extF80M_to_f32.c
parent2637351cbd777eb10629bb2f8bc12eab08ab72a6 (diff)
Bump version to 0.226mame0226
Diffstat (limited to '3rdparty/softfloat3/source/extF80M_to_f32.c')
0 files changed, 0 insertions, 0 deletions
0' href='#n120'>120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414
// license:BSD-3-Clause
// copyright-holders:R. Belmont
/**********************************************************************

    rtc4543.c - Epson R4543 real-time clock chip emulation
    by R. Belmont

    JRC 6355E / NJU6355E is basically similar, but order of registers
    is reversed and readouts happen on falling CLK edge.

    The clock's seven registers are read out as 52 consecutive bits of
    data, with the middle register being only 4 bits wide. The bits
    are numbered 0-27 and 32-55 here for implementation convenience.

**********************************************************************/

#include "emu.h"
#include "rtc4543.h"

//#define VERBOSE 1
#include "logmacro.h"


//**************************************************************************
//  MACROS / CONSTANTS
//**************************************************************************

char const *const rtc4543_device::s_reg_names[7] =
{
	"second",
	"minute",
	"hour",
	"day of the week",
	"day",
	"month",
	"year"
};


//**************************************************************************
//  RTC4543 DEVICE
//**************************************************************************

// device type definition
DEFINE_DEVICE_TYPE(RTC4543, rtc4543_device, "rtc4543", "Epson R4543 RTC")


//-------------------------------------------------
//  rtc4543_device - constructor
//-------------------------------------------------

rtc4543_device::rtc4543_device(const machine_config &mconfig, const char *tag, device_t *owner, const XTAL &clock)
	: rtc4543_device(mconfig, RTC4543, tag, owner, clock)
{
}

rtc4543_device::rtc4543_device(const machine_config &mconfig, device_type type, const char *tag, device_t *owner, const XTAL &clock)
	: device_t(mconfig, type, tag, owner, clock)
	, device_rtc_interface(mconfig, *this)
	, m_data_cb(*this)
	, m_ce(0), m_clk(0), m_wr(0), m_data(0), m_curbit(0)
	, m_clock_timer(nullptr)
{
}


//-------------------------------------------------
//  device_start - device-specific startup
//-------------------------------------------------

void rtc4543_device::device_start()
{
	m_data_cb.resolve_safe();

	// allocate timers
	m_clock_timer = timer_alloc(FUNC(rtc4543_device::advance_clock), this);
	m_clock_timer->adjust(attotime::from_hz(clock() / 32768), 0, attotime::from_hz(clock() / 32768));

	// state saving
	save_item(NAME(m_ce));
	save_item(NAME(m_clk));
	save_item(NAME(m_wr));
	save_item(NAME(m_data));
	save_item(NAME(m_regs));
	save_item(NAME(m_curbit));
}


//-------------------------------------------------
//  device_reset - device-specific reset
//-------------------------------------------------

void rtc4543_device::device_reset()
{
	m_ce = 0;
	m_wr = 0;
	m_clk = 0;
	m_data = 0;
	m_curbit = 0;
}


//-------------------------------------------------
//  advance_clock -
//-------------------------------------------------

TIMER_CALLBACK_MEMBER(rtc4543_device::advance_clock)
{
	advance_seconds();
}


//-------------------------------------------------
//  rtc_clock_updated -
//-------------------------------------------------

void rtc4543_device::rtc_clock_updated(int year, int month, int day, int day_of_week, int hour, int minute, int second)
{
	static int const weekday[7] = { 7, 1, 2, 3, 4, 5, 6 };

	m_regs[0] = convert_to_bcd(second);                     // seconds (BCD, 0-59) in bits 0-6, bit 7 = battery low
	m_regs[1] = convert_to_bcd(minute);                     // minutes (BCD, 0-59)
	m_regs[2] = convert_to_bcd(hour);                       // hour (BCD, 0-23)
	m_regs[3] = convert_to_bcd(weekday[day_of_week - 1]);   // day of the week (1-7)
	m_regs[4] = convert_to_bcd(day);                        // day (BCD, 1-31)
	m_regs[5] = convert_to_bcd(month);                      // month (BCD, 1-12)
	m_regs[6] = convert_to_bcd(year % 100);                 // year (BCD, 0-99)
}


//-------------------------------------------------
//  ce_w - chip enable write
//-------------------------------------------------

WRITE_LINE_MEMBER( rtc4543_device::ce_w )
{
	if (!state && m_ce) // complete transfer
	{
		LOG("CE falling edge\n");
		ce_falling();
	}
	else if (state && !m_ce) // start new data transfer
	{
		LOG("CE rising edge\n");
		ce_rising();
	}

	m_ce = state;

	// timer disabled during writes
	m_clock_timer->enable(!m_ce || !m_wr);
}


//-------------------------------------------------
//  ce_rising - CE rising edge trigger
//-------------------------------------------------

void rtc4543_device::ce_rising()
{
	m_curbit = 0; // force immediate reload of output data
}


//-------------------------------------------------
//  ce_falling - CE falling edge trigger
//-------------------------------------------------

void rtc4543_device::ce_falling()
{
}


//-------------------------------------------------
//  wr_w - data direction line write
//-------------------------------------------------

WRITE_LINE_MEMBER( rtc4543_device::wr_w )
{
	if (state != m_wr)
		LOG("WR: %u\n", state);

	m_wr = state;
}


//-------------------------------------------------
//  clk_w - serial clock write
//-------------------------------------------------

WRITE_LINE_MEMBER( rtc4543_device::clk_w )
{
	if (m_ce)
	{
		int bit = m_curbit;
		if (!m_clk && state)
		{
			clk_rising();
			LOG("CLK rising edge (I/O: %u, bit %d)\n", m_data, bit);
		}
		else if (m_clk && !state)
		{
			clk_falling();
			LOG("CLK falling edge (I/O: %u, bit %d)\n", m_data, bit);
		}
	}

	m_clk = state;
}


//-------------------------------------------------
//  clk_rising - CLK rising edge trigger
//-------------------------------------------------

void rtc4543_device::clk_rising()
{
	// note: output data does not change when clk at final bit
	if (m_curbit == 56)
		return;

	// rising edge - read/write data becomes valid here
	if (!m_wr)
		load_bit(m_curbit / 8);
	else
		store_bit(m_curbit / 8);

	advance_bit();

	// update only occurs when a write goes all the way through
	if (m_wr && m_curbit == 56)
		update_effective();
}


//-------------------------------------------------
//  clk_falling - CLK falling edge trigger
//-------------------------------------------------

void rtc4543_device::clk_falling()
{
}


//-------------------------------------------------
//  data_w - I/O write
//-------------------------------------------------

WRITE_LINE_MEMBER( rtc4543_device::data_w )
{
	m_data = state & 1;
}


//-------------------------------------------------
//  data_r - I/O read
//-------------------------------------------------

READ_LINE_MEMBER( rtc4543_device::data_r )
{
	return m_data;
}


//-------------------------------------------------
//  load_bit - serial read from register
//-------------------------------------------------

void rtc4543_device::load_bit(int reg)
{
	assert(reg < std::size(m_regs));
	int bit = m_curbit & 7;

	// reload data?
	if (bit == 0)
		LOG("RTC sending low digit of %s: %x\n", s_reg_names[reg], m_regs[reg] & 0xf);
	else if (bit == 4)
		LOG("RTC sending high digit of %s: %x\n", s_reg_names[reg], (m_regs[reg] >> 4) & 0xf);

	// shift data bit
	m_data = (m_regs[reg] >> bit) & 1;
	m_data_cb(m_data);
}


//-------------------------------------------------
//  store_bit - serial write
//-------------------------------------------------

void rtc4543_device::store_bit(int reg)
{
	assert(reg < std::size(m_regs));
	int bit = m_curbit & 7;

	m_regs[reg] &= ~(1 << bit);
	m_regs[reg] |= m_data << bit;

	if (bit == 7)
		LOG("RTC received high digit of %s: %X\n", s_reg_names[reg], (m_regs[reg] >> 4) & 0xf);
	else if (bit == 3)
		LOG("RTC received low digit of %s: %X\n", s_reg_names[reg], m_regs[reg] & 0xf);
}


//-------------------------------------------------
//  advance_bit - increment the bit counter
//-------------------------------------------------

void rtc4543_device::advance_bit()
{
	m_curbit++;

	// day-of-week register only takes 4 bits
	if (m_curbit == 28)
	{
		// skip 4 bits, Brother Maynard
		m_curbit += 4;
	}
}


//-------------------------------------------------
//  update_effective - update the RTC
//-------------------------------------------------

void rtc4543_device::update_effective()
{
	LOG("RTC updated: %02x.%02x.%02x (%01x) %02x:%02x:%02x\n", m_regs[6], m_regs[5], m_regs[4], m_regs[3], m_regs[2], m_regs[1], m_regs[0]);
	set_time(
			false,
			bcd_to_integer(m_regs[6]),      // year
			bcd_to_integer(m_regs[5]),      // month
			bcd_to_integer(m_regs[4]),      // day
			(m_regs[3] % 7) + 1,            // day of week
			bcd_to_integer(m_regs[2]),      // hour
			bcd_to_integer(m_regs[1]),      // minute
			bcd_to_integer(m_regs[0]));     // second
}


//**************************************************************************
//  JRC 6355E DEVICE
//**************************************************************************

// device type definition
DEFINE_DEVICE_TYPE(JRC6355E, jrc6355e_device, "jrc6355e", "JRC 6355E RTC")


//-------------------------------------------------
//  jrc6355e_device - constructor
//-------------------------------------------------

jrc6355e_device::jrc6355e_device(const machine_config &mconfig, const char *tag, device_t *owner, const XTAL &clock)
	: rtc4543_device(mconfig, JRC6355E, tag, owner, clock)
{
}


//-------------------------------------------------
//  ce_rising - CE rising edge trigger
//-------------------------------------------------

void jrc6355e_device::ce_rising()
{
	m_curbit = 0; // force immediate reload of output data
	load_bit(6);
}



//-------------------------------------------------
//  ce_falling - CE falling edge trigger
//-------------------------------------------------

void jrc6355e_device::ce_falling()
{
	// update occurs on falling edge of CE after minutes are written
	if (m_wr && m_curbit >= 48)
	{
		// seconds are zeroed
		m_regs[0] = 0;
		update_effective();
	}
}


//-------------------------------------------------
//  clk_rising - CLK rising edge trigger
//-------------------------------------------------

void jrc6355e_device::clk_rising()
{
	if (m_curbit == 56)
		return;

	if (m_wr)
		store_bit(6 - (m_curbit / 8));
}


//-------------------------------------------------
//  clk_falling - CLK falling edge trigger
//-------------------------------------------------

void jrc6355e_device::clk_falling()
{
	if (m_curbit == 56)
		return;

	advance_bit();

	if (!m_wr && m_curbit != 56)
		load_bit(6 - (m_curbit / 8));
}