/***************************************************************************
spectrum.c
Functions to emulate the video hardware of the ZX Spectrum.
Changes:
DJR 08/02/00 - Added support for FLASH 1.
DJR 16/05/00 - Support for TS2068/TC2048 hires and 64 column modes.
DJR 19/05/00 - Speeded up Spectrum 128 screen refresh.
DJR 23/05/00 - Preliminary support for border colour emulation.
***************************************************************************/
#include "emu.h"
#include "includes/spectrum.h"
/***************************************************************************
Start the video hardware emulation.
***************************************************************************/
VIDEO_START_MEMBER(spectrum_state,spectrum)
{
m_frame_invert_count = 25;
m_frame_number = 0;
m_flash_invert = 0;
m_previous_border_x = 0; m_previous_border_y = 0;
machine().primary_screen->register_screen_bitmap(m_border_bitmap);
m_screen_location = m_video_ram;
}
VIDEO_START_MEMBER(spectrum_state,spectrum_128)
{
m_frame_invert_count = 25;
m_frame_number = 0;
m_flash_invert = 0;
m_previous_border_x = 0; m_previous_border_y = 0;
machine().primary_screen->register_screen_bitmap(m_border_bitmap);
}
/* return the color to be used inverting FLASHing colors if necessary */
inline unsigned char spectrum_state::get_display_color (unsigned char color, int invert)
{
if (invert && (color & 0x80))
return (color & 0xc0) + ((color & 0x38) >> 3) + ((color & 0x07) << 3);
else
return color;
}
/* Code to change the FLASH status every 25 frames. Note this must be
independent of frame skip etc. */
void spectrum_state::screen_eof_spectrum(screen_device &screen, bool state)
{
// rising edge
if (state)
{
m_frame_number++;
if (m_frame_number >= m_frame_invert_count)
{
m_frame_number = 0;
m_flash_invert = !m_flash_invert;
}
spectrum_UpdateBorderBitmap();
}
}
/***************************************************************************
Update the spectrum screen display.
The screen consists of 312 scanlines as follows:
64 border lines (the last 48 are actual border lines; the others may be
border lines or vertical retrace)
192 screen lines
56 border lines
Each screen line has 48 left border pixels, 256 screen pixels and 48 right
border pixels.
Each scanline takes 224 T-states divided as follows:
128 Screen (reads a screen and ATTR byte [8 pixels] every 4 T states)
24 Right border
48 Horizontal retrace
24 Left border
The 128K Spectrums have only 63 scanlines before the TV picture (311 total)
and take 228 T-states per scanline.
***************************************************************************/
inline void spectrum_state::spectrum_plot_pixel(bitmap_ind16 &bitmap, int x, int y, UINT32 color)
{
bitmap.pix16(y, x) = (UINT16)color;
}
UINT32 spectrum_state::screen_update_spectrum(screen_device &screen, bitmap_ind16 &bitmap, const rectangle &cliprect)
{
// note, don't update borders in here, this can time travel w/regards to other timers and may end up giving you
// screen positions earlier than the last write handler gave you
/* for now do a full-refresh */
int x, y, b, scrx, scry;
unsigned short ink, pap;
unsigned char *attr, *scr;
// int full_refresh = 1;
if (m_border_bitmap.valid())
copyscrollbitmap(bitmap, m_border_bitmap, 0, 0, 0, 0, cliprect);
scr=m_screen_location;
for (y=0; y<192; y++)
{
scrx=SPEC_LEFT_BORDER;
scry=((y&7) * 8) + ((y&0x38)>>3) + (y&0xC0);
attr=m_screen_location + ((scry>>3)*32) + 0x1800;
for (x=0;x<32;x++)
{
/* Get ink and paper colour with bright */
if (m_flash_invert && (*attr & 0x80))
{
ink=((*attr)>>3) & 0x0f;
pap=((*attr) & 0x07) + (((*attr)>>3) & 0x08);
}
else
{
ink=((*attr) & 0x07) + (((*attr)>>3) & 0x08);
pap=((*attr)>>3) & 0x0f;
}
for (b=0x80;b!=0;b>>=1)
{
if (*scr&b)
spectrum_plot_pixel(bitmap,scrx++,SPEC_TOP_BORDER+scry,ink);
else
spectrum_plot_pixel(bitmap,scrx++,SPEC_TOP_BORDER+scry,pap);
}
scr++;
attr++;
}
}
return 0;
}
static const rgb_t spectrum_palette[16] = {
MAKE_RGB(0x00, 0x00, 0x00),
MAKE_RGB(0x00, 0x00, 0xbf),
MAKE_RGB(0xbf, 0x00, 0x00),
MAKE_RGB(0xbf, 0x00, 0xbf),
MAKE_RGB(0x00, 0xbf, 0x00),
MAKE_RGB(0x00, 0xbf, 0xbf),
MAKE_RGB(0xbf, 0xbf, 0x00),
MAKE_RGB(0xbf, 0xbf, 0xbf),
MAKE_RGB(0x00, 0x00, 0x00),
MAKE_RGB(0x00, 0x00, 0xff),
MAKE_RGB(0xff, 0x00, 0x00),
MAKE_RGB(0xff, 0x00, 0xff),
MAKE_RGB(0x00, 0xff, 0x00),
MAKE_RGB(0x00, 0xff, 0xff),
MAKE_RGB(0xff, 0xff, 0x00),
MAKE_RGB(0xff, 0xff, 0xff)
};
/* Initialise the palette */
PALETTE_INIT_MEMBER(spectrum_state,spectrum)
{
palette_set_colors(machine(), 0, spectrum_palette, ARRAY_LENGTH(spectrum_palette));
}
/* The code below is just a per-pixel 'partial update' for the border */
void spectrum_state::spectrum_UpdateBorderBitmap()
{
unsigned int x = machine().primary_screen->hpos();
unsigned int y = machine().primary_screen->vpos();
int width = m_border_bitmap.width();
int height = m_border_bitmap.height();
if (m_border_bitmap.valid())
{
int colour = m_port_fe_data & 0x07;
//printf("update border from %d,%d to %d,%d\n", m_previous_border_x, m_previous_border_y, x, y);
do
{
if (m_previous_border_y < height)
{
UINT16* bm = &m_border_bitmap.pix16(m_previous_border_y);
if (m_previous_border_x < width)
bm[m_previous_border_x] = colour;
}
m_previous_border_x += 1;
if (m_previous_border_x > width)
{
m_previous_border_x = 0;
m_previous_border_y += 1;
if (m_previous_border_y > height)
{
m_previous_border_y = 0;
}
}
}
while (!((m_previous_border_x == x) && (m_previous_border_y == y)));
}
else
{
// no border bitmap allocated? fatalerror?
}
}