// license:MAME
// copyright-holders:Angelo Salese, Barry Rodewald
/************************************************************************************************
Sharp X1 (c) 1983 Sharp Corporation
driver by Angelo Salese & Barry Rodewald,
special thanks to Dirk Best for various wd17xx fixes
TODO:
- Rewrite keyboard input hook-up and decap/dump the keyboard MCU if possible;
- Fix the 0xe80/0xe83 kanji ROM readback;
- x1turbo keyboard inputs are currently broken, use x1turbo40 for now;
- Hook-up remaining .tap image formats;
- Implement APSS tape commands;
- Sort out / redump the BIOS gfx roms;
- X1Turbo: Implement SIO.
- Implement true 400 lines mode (i.e. Chatnoir no Mahjong v2.1, Casablanca)
- Implement SASI HDD interface;
- clean-ups!
- There are various unclear video things, these are:
- Implement the remaining scrn regs;
- Implement the new features of the x1turboz, namely the 4096 color feature amongst other things
- (anything else?)
- Driver Configuration switches:
- OPN for X1
- EMM, and hook-up for X1 too
- RAM size for EMM
- specific x1turboz features?
per-game/program specific TODO:
- CZ8FB02 / CZ8FB03: doesn't load at all, they are 2hd floppies apparently;
- Chack'n Pop: game is too fast, presumably missing wait states;
- Dragon Buster: it crashed to me once with a obj flag hang;
- The Goonies (x1 only): goes offsync with the PCG beam positions;
- Graphtol: sets up x1turboz paletteram, graphic garbage due of it;
- Gyajiko2: hangs when it's supposed to load the character selection screen, FDC bug?
- Hydlide 3: can't get the user disk to work properly, could be a bad dump;
- Lupin the 3rd: don't know neither how to "data load" nor how to "create a character" ... does the game hangs?
- Might & Magic: uses 0xe80-3 kanji ports, should be a good test case for that;
- "newtype": trips a z80dma assert, worked around for now;
- Saziri: doesn't re-initialize the tilemap attribute vram when you start a play, making it to have missing colors if you don't start a play in time;
- Suikoden: shows a JP message error (DFJustin: "Problem with the disk device !! Please set a floppy disk properly and press the return key. Retrying.")
- Super Billiards (X1 Pack 14): has a slight PCG timing bug, that happens randomly;
- Trivia-Q: dunno what to do on the selection screen, missing inputs?
- Turbo Alpha: has z80dma / fdc bugs, doesn't show the presentation properly and then hangs;
- Will 2: doesn't load, fdc issue presumably (note: it's a x1turbo game ONLY);
- X1F Demo ("New X1 Demo"): needs partial updates, but they doesn't cope well with current video system;
- Ys 2: crashes after the disclaimer screen;
- Ys 3: missing user disk, to hack it (and play with x1turboz features): bp 81ca,pc += 2
- Ys 3: never uploads a valid 4096 palette, probably related to the fact that we don't have an user disk
Notes:
- An interesting feature of the Sharp X-1 is the extended i/o bank. When the ppi port c bit 5
does a 1->0 transition, any write to the i/o space accesses 2 or 3 banks gradients of the bitmap RAM
with a single write (generally used for layer clearances and bitmap-style sprites).
Any i/o read disables this extended bitmap ram.
- I/O port $700 bit 7 of X1 Turbo is a sound (dip-)switch / jumper setting. I don't know yet what is for,
but King's Knight needs it to be active otherwise it refuses to boot.
- ROM format is:
0x00 ROM id (must be 0x01)
0x01 - 0x0e ROM header
0xff16 - 0xff17 start-up vector
In theory, you can convert your tape / floppy games into ROM format easily, provided that you know what's the pinout of the
cartridge slot and it doesn't exceed 64k (0x10000) of size.
- Gruppe: shows a random bitmap graphic then returns "program load error" ... it wants that the floppy has write protection enabled (!) (btanb)
- Maidum: you need to load BOTH disk with write protection disabled, otherwise it refuses to run. (btanb)
- Marvelous: needs write protection disabled (btanb)
- Chack'n Pop: to load this game, do a files command on the "Jodan Dos" prompt then move the cursor up at the "Chack'n Pop" file.
Substitute bin with load and press enter. Finally, do a run once that it loaded correctly.
- Faeries Residence: to load this game, put a basic v2.0 in drive 0, then execute a NEWON command. Load game disks into drive 0 and 1 then
type run"START" (case sensitive)
- POPLEMON: same as above, but you need to type run"POP"
=================================================================================================
X1 (CZ-800C) - November, 1982
* CPU: z80A @ 4MHz, 80C49 x 2 (one for key scan, the other for TV & Cas Ctrl)
* ROM: IPL (4KB) + chargen (2KB)
* RAM: Main memory (64KB) + VRAM (4KB) + RAM for PCG (6KB) + GRAM (48KB, Option)
* Text Mode: 80x25 or 40x25
* Graphic Mode: 640x200 or 320x200, 8 colors
* Sound: PSG 8 octave
* I/O Ports: Centronic ports, 2 Joystick ports, Cassette port (2700 baud)
X1C (CZ-801C) - October, 1983
* same but only 48KB GRAM
X1D (CZ-802C) - October, 1983
* same as X1C but with a 3" floppy drive (notice: 3" not 3" 1/2!!)
X1Cs (CZ-803C) - June, 1984
* two expansion I/O ports
X1Ck (CZ-804C) - June, 1984
* same as X1Cs
* ROM: IPL (4KB) + chargen (2KB) + Kanji 1st level
X1F Model 10 (CZ-811C) - July, 1985
* Re-designed
* ROM: IPL (4KB) + chargen (2KB)
X1F Model 20 (CZ-812C) - July, 1985
* Re-designed (same as Model 10)
* ROM: IPL (4KB) + chargen (2KB) + Kanji
* Built Tape drive plus a 5" floppy drive was available
X1G Model 10 (CZ-820C) - July, 1986
* Re-designed again
* ROM: IPL (4KB) + chargen (2KB)
X1G Model 30 (CZ-822C) - July, 1986
* Re-designed again (same as Model 10)
* ROM: IPL (4KB) + chargen (2KB) + Kanji
* Built Tape drive plus a 5" floppy drive was available
X1twin (CZ-830C) - December, 1986
* Re-designed again (same as Model 10)
* ROM: IPL (4KB) + chargen (2KB) + Kanji
* Built Tape drive plus a 5" floppy drive was available
* It contains a PC-Engine
============= X1 Turbo series =============
X1turbo Model 30 (CZ-852C) - October, 1984
* CPU: z80A @ 4MHz, 80C49 x 2 (one for key scan, the other for TV & Cas Ctrl)
* ROM: IPL (32KB) + chargen (8KB) + Kanji (128KB)
* RAM: Main memory (64KB) + VRAM (6KB) + RAM for PCG (6KB) + GRAM (96KB)
* Text Mode: 80xCh or 40xCh with Ch = 10, 12, 20, 25 (same for Japanese display)
* Graphic Mode: 640x200 or 320x200, 8 colors
* Sound: PSG 8 octave
* I/O Ports: Centronic ports, 2 Joystick ports, built-in Cassette interface,
2 Floppy drive for 5" disks, two expansion I/O ports
X1turbo Model 20 (CZ-851C) - October, 1984
* same as Model 30, but only 1 Floppy drive is included
X1turbo Model 10 (CZ-850C) - October, 1984
* same as Model 30, but Floppy drive is optional and GRAM is 48KB (it can
be expanded to 96KB however)
X1turbo Model 40 (CZ-862C) - July, 1985
* same as Model 30, but uses tv screen (you could watch television with this)
X1turboII (CZ-856C) - November, 1985
* same as Model 30, but restyled, cheaper and sold with utility software
X1turboIII (CZ-870C) - November, 1986
* with two High Density Floppy driver
X1turboZ (CZ-880C) - December, 1986
* CPU: z80A @ 4MHz, 80C49 x 2 (one for key scan, the other for TV & Cas Ctrl)
* ROM: IPL (32KB) + chargen (8KB) + Kanji 1st & 2nd level
* RAM: Main memory (64KB) + VRAM (6KB) + RAM for PCG (6KB) + GRAM (96KB)
* Text Mode: 80xCh or 40xCh with Ch = 10, 12, 20, 25 (same for Japanese display)
* Graphic Mode: 640x200 or 320x200, 8 colors [in compatibility mode],
640x400, 8 colors (out of 4096); 320x400, 64 colors (out of 4096);
320x200, 4096 colors [in multimode],
* Sound: PSG 8 octave + FM 8 octave
* I/O Ports: Centronic ports, 2 Joystick ports, built-in Cassette interface,
2 Floppy drive for HD 5" disks, two expansion I/O ports
X1turboZII (CZ-881C) - December, 1987
* same as turboZ, but added 64KB expansion RAM
X1turboZIII (CZ-888C) - December, 1988
* same as turboZII, but no more built-in cassette drive
Please refer to http://www2s.biglobe.ne.jp/~ITTO/x1/x1menu.html for
more info
BASIC has to be loaded from external media (tape or disk), the
computer only has an Initial Program Loader (IPL)
=================================================================================================
x1turbo specs (courtesy of Yasuhiro Ogawa):
upper board: Z80A-CPU
Z80A-DMA
Z80A-SIO(O)
Z80A-CTC
uPD8255AC
LH5357(28pin mask ROM. for IPL?)
YM2149F
16.000MHz(X1)
lower board: IX0526CE(HN61364) (28pin mask ROM. for ANK font?)
MB83256x4 (Kanji ROMs)
HD46505SP (VDP)
M80C49-277 (MCU)
uPD8255AC
uPD1990 (RTC) + battery
6.000MHz(X2)
42.9545MHz(X3)
FDD I/O board: MB8877A (FDC)
MB4107 (VFO)
RAM banks:
upper board: MB8265A-15 x8 (main memory)
lower board: MB8416A-12 x3 (VRAM)
MB8416A-15 x3 (PCG RAM)
MB81416-10 x12 (GRAM)
************************************************************************************************/
#include "includes/x1.h"
#define MAIN_CLOCK XTAL_16MHz
#define VDP_CLOCK XTAL_42_9545MHz
#define MCU_CLOCK XTAL_6MHz
/*************************************
*
* Video Functions
*
*************************************/
VIDEO_START_MEMBER(x1_state,x1)
{
m_avram = auto_alloc_array_clear(machine(), UINT8, 0x800);
m_tvram = auto_alloc_array_clear(machine(), UINT8, 0x800);
m_kvram = auto_alloc_array_clear(machine(), UINT8, 0x800);
m_gfx_bitmap_ram = auto_alloc_array_clear(machine(), UINT8, 0xc000*2);
m_pal_4096 = auto_alloc_array_clear(machine(), UINT8, 0x1000*3);
}
void x1_state::x1_draw_pixel(bitmap_rgb32 &bitmap,int y,int x,UINT16 pen,UINT8 width,UINT8 height)
{
if(!machine().first_screen()->visible_area().contains(x, y))
return;
if(width && height)
{
bitmap.pix32(y+0+m_ystart, x+0+m_xstart) = m_palette->pen(pen);
bitmap.pix32(y+0+m_ystart, x+1+m_xstart) = m_palette->pen(pen);
bitmap.pix32(y+1+m_ystart, x+0+m_xstart) = m_palette->pen(pen);
bitmap.pix32(y+1+m_ystart, x+1+m_xstart) = m_palette->pen(pen);
}
else if(width)
{
bitmap.pix32(y+m_ystart, x+0+m_xstart) = m_palette->pen(pen);
bitmap.pix32(y+m_ystart, x+1+m_xstart) = m_palette->pen(pen);
}
else if(height)
{
bitmap.pix32(y+0+m_ystart, x+m_xstart) = m_palette->pen(pen);
bitmap.pix32(y+1+m_ystart, x+m_xstart) = m_palette->pen(pen);
}
else
bitmap.pix32(y+m_ystart, x+m_xstart) = m_palette->pen(pen);
}
#define mc6845_h_char_total (m_crtc_vreg[0])
#define mc6845_h_display (m_crtc_vreg[1])
#define mc6845_h_sync_pos (m_crtc_vreg[2])
#define mc6845_sync_width (m_crtc_vreg[3])
#define mc6845_v_char_total (m_crtc_vreg[4])
#define mc6845_v_total_adj (m_crtc_vreg[5])
#define mc6845_v_display (m_crtc_vreg[6])
#define mc6845_v_sync_pos (m_crtc_vreg[7])
#define mc6845_mode_ctrl (m_crtc_vreg[8])
#define mc6845_tile_height (m_crtc_vreg[9]+1)
#define mc6845_cursor_y_start (m_crtc_vreg[0x0a])
#define mc6845_cursor_y_end (m_crtc_vreg[0x0b])
#define mc6845_start_addr (((m_crtc_vreg[0x0c]<<8) & 0x3f00) | (m_crtc_vreg[0x0d] & 0xff))
#define mc6845_cursor_addr (((m_crtc_vreg[0x0e]<<8) & 0x3f00) | (m_crtc_vreg[0x0f] & 0xff))
#define mc6845_light_pen_addr (((m_crtc_vreg[0x10]<<8) & 0x3f00) | (m_crtc_vreg[0x11] & 0xff))
#define mc6845_update_addr (((m_crtc_vreg[0x12]<<8) & 0x3f00) | (m_crtc_vreg[0x13] & 0xff))
/* adjust tile index when we are under double height condition */
UINT8 x1_state::check_prev_height(int x,int y,int x_size)
{
UINT8 prev_tile = m_tvram[(x+((y-1)*x_size)+mc6845_start_addr) & 0x7ff];
UINT8 cur_tile = m_tvram[(x+(y*x_size)+mc6845_start_addr) & 0x7ff];
UINT8 prev_attr = m_avram[(x+((y-1)*x_size)+mc6845_start_addr) & 0x7ff];
UINT8 cur_attr = m_avram[(x+(y*x_size)+mc6845_start_addr) & 0x7ff];
if(prev_tile == cur_tile && prev_attr == cur_attr)
return 8;
return 0;
}
/* Exoa II - Warroid: if double height isn't enabled on the first tile of the line then double height is disabled on everything else. */
UINT8 x1_state::check_line_valid_height(int y,int x_size,int height)
{
UINT8 line_attr = m_avram[(0+(y*x_size)+mc6845_start_addr) & 0x7ff];
if((line_attr & 0x40) == 0)
return 0;
return height;
}
void x1_state::draw_fgtilemap(bitmap_rgb32 &bitmap,const rectangle &cliprect)
{
/*
attribute table:
x--- ---- double width
-x-- ---- double height
--x- ---- PCG select
---x ---- color blinking
---- x--- reverse color
---- -xxx color pen
x--- ---- select Kanji ROM
-x-- ---- Kanji side (0=left, 1=right)
--x- ---- Underline
---x ---- Kanji ROM select (0=level 1, 1=level 2) (TODO: implement this)
---- xxxx Kanji upper 4 bits
*/
int y,x,res_x,res_y;
UINT32 tile_offset;
UINT8 x_size,y_size;
x_size = mc6845_h_display;
y_size = mc6845_v_display;
if(x_size == 0 || y_size == 0)
return; //don't bother if screen is off
if(x_size != 80 && x_size != 40 && y_size != 25)
popmessage("%d %d",x_size,y_size);
for (y=0;y<y_size;y++)
{
for (x=0;x<x_size;x++)
{
int tile = m_tvram[((x+y*x_size)+mc6845_start_addr) & 0x7ff];
int color = m_avram[((x+y*x_size)+mc6845_start_addr) & 0x7ff] & 0x1f;
int width = BIT(m_avram[((x+y*x_size)+mc6845_start_addr) & 0x7ff], 7);
int height = BIT(m_avram[((x+y*x_size)+mc6845_start_addr) & 0x7ff], 6);
int pcg_bank = BIT(m_avram[((x+y*x_size)+mc6845_start_addr) & 0x7ff], 5);
UINT8 *gfx_data = pcg_bank ? m_pcg_ram : m_cg_rom; //machine.root_device().memregion(pcg_bank ? "pcg" : "cgrom")->base();
int knj_enable = 0;
int knj_side = 0;
int knj_bank = 0;
int knj_uline = 0;
if(m_is_turbo)
{
knj_enable = BIT(m_kvram[((x+y*x_size)+mc6845_start_addr) & 0x7ff], 7);
knj_side = BIT(m_kvram[((x+y*x_size)+mc6845_start_addr) & 0x7ff], 6);
knj_uline = BIT(m_kvram[((x+y*x_size)+mc6845_start_addr) & 0x7ff], 5);
//knj_lv2 = BIT(m_kvram[((x+y*x_size)+mc6845_start_addr) & 0x7ff], 4);
knj_bank = m_kvram[((x+y*x_size)+mc6845_start_addr) & 0x7ff] & 0x0f;
if(knj_enable)
{
gfx_data = m_kanji_rom;
tile = ((tile + (knj_bank << 8)) << 1) + (knj_side & 1);
}
}
{
int pen[3],pen_mask,pcg_pen,xi,yi,dy;
pen_mask = color & 7;
dy = 0;
height = check_line_valid_height(y,x_size,height);
if(height && y)
dy = check_prev_height(x,y,x_size);
/* guess: assume that Kanji VRAM doesn't double the vertical size */
if(knj_enable) { height = 0; }
for(yi=0;yi<mc6845_tile_height;yi++)
{
for(xi=0;xi<8;xi++)
{
if(knj_enable) //kanji select
{
tile_offset = tile * 16;
tile_offset += (yi+dy*(m_scrn_reg.v400_mode+1)) >> (height+m_scrn_reg.v400_mode);
pen[0] = gfx_data[tile_offset+0x0000]>>(7-xi) & (pen_mask & 1)>>0;
pen[1] = gfx_data[tile_offset+0x0000]>>(7-xi) & (pen_mask & 2)>>1;
pen[2] = gfx_data[tile_offset+0x0000]>>(7-xi) & (pen_mask & 4)>>2;
if(yi == mc6845_tile_height-1 && knj_uline) //underlined attribute
{
pen[0] = (pen_mask & 1)>>0;
pen[1] = (pen_mask & 2)>>1;
pen[2] = (pen_mask & 4)>>2;
}
if((yi >= 16 && m_scrn_reg.v400_mode == 0) || (yi >= 32 && m_scrn_reg.v400_mode == 1))
pen[0] = pen[1] = pen[2] = 0;
}
else if(pcg_bank) // PCG
{
tile_offset = tile * 8;
tile_offset += (yi+dy*(m_scrn_reg.v400_mode+1)) >> (height+m_scrn_reg.v400_mode);
pen[0] = gfx_data[tile_offset+0x0000]>>(7-xi) & (pen_mask & 1)>>0;
pen[1] = gfx_data[tile_offset+0x0800]>>(7-xi) & (pen_mask & 2)>>1;
pen[2] = gfx_data[tile_offset+0x1000]>>(7-xi) & (pen_mask & 4)>>2;
if((yi >= 8 && m_scrn_reg.v400_mode == 0) || (yi >= 16 && m_scrn_reg.v400_mode == 1))
pen[0] = pen[1] = pen[2] = 0;
}
else
{
tile_offset = tile * (8*(m_scrn_reg.ank_sel+1));
tile_offset += (yi+dy*(m_scrn_reg.v400_mode+1)) >> (height+m_scrn_reg.v400_mode);
pen[0] = gfx_data[tile_offset+m_scrn_reg.ank_sel*0x0800]>>(7-xi) & (pen_mask & 1)>>0;
pen[1] = gfx_data[tile_offset+m_scrn_reg.ank_sel*0x0800]>>(7-xi) & (pen_mask & 2)>>1;
pen[2] = gfx_data[tile_offset+m_scrn_reg.ank_sel*0x0800]>>(7-xi) & (pen_mask & 4)>>2;
if(m_scrn_reg.ank_sel)
{
if((yi >= 16 && m_scrn_reg.v400_mode == 0) || (yi >= 32 && m_scrn_reg.v400_mode == 1))
pen[0] = pen[1] = pen[2] = 0;
}
else
{
if((yi >= 8 && m_scrn_reg.v400_mode == 0) || (yi >= 16 && m_scrn_reg.v400_mode == 1))
pen[0] = pen[1] = pen[2] = 0;
}
}
pcg_pen = pen[2]<<2|pen[1]<<1|pen[0]<<0;
if(color & 0x10 && machine().first_screen()->frame_number() & 0x10) //reverse flickering
pcg_pen^=7;
if(pcg_pen == 0 && (!(color & 8)))
continue;
if(color & 8) //revert the used color pen
pcg_pen^=7;
if((m_scrn_reg.blackclip & 8) && (color == (m_scrn_reg.blackclip & 7)))
pcg_pen = 0; // clip the pen to black
res_x = x*8+xi*(width+1);
res_y = y*(mc6845_tile_height)+yi;
if(res_y < cliprect.min_y || res_y > cliprect.max_y) // partial update, TODO: optimize
continue;
x1_draw_pixel(bitmap,res_y,res_x,pcg_pen,width,0);
}
}
}
if(width) //skip next char if we are under double width condition
x++;
}
}
}
/*
* Priority Mixer Calculation (pri)
*
* If pri is 0xff then the bitmap entirely covers the tilemap, if it's 0x00 then
* the tilemap priority is entirely above the bitmap. Any other value mixes the
* bitmap and the tilemap priorities based on the pen value, bit 0 = entry 0 <-> bit 7 = entry 7
* of the bitmap.
*
*/
int x1_state::priority_mixer_pri(int color)
{
int pri_i,pri_mask_calc;
pri_i = 0;
pri_mask_calc = 1;
while(pri_i < 7)
{
if((color & 7) == pri_i)
break;
pri_i++;
pri_mask_calc<<=1;
}
return pri_mask_calc;
}
void x1_state::draw_gfxbitmap(bitmap_rgb32 &bitmap,const rectangle &cliprect, int plane,int pri)
{
int xi,yi,x,y;
int pen_r,pen_g,pen_b,color;
int pri_mask_val;
UINT8 x_size,y_size;
int gfx_offset;
x_size = mc6845_h_display;
y_size = mc6845_v_display;
if(x_size == 0 || y_size == 0)
return; //don't bother if screen is off
if(x_size != 80 && x_size != 40 && y_size != 25)
popmessage("%d %d",x_size,y_size);
//popmessage("%04x %02x",mc6845_start_addr,mc6845_tile_height);
for (y=0;y<y_size;y++)
{
for(x=0;x<x_size;x++)
{
for(yi=0;yi<(mc6845_tile_height);yi++)
{
for(xi=0;xi<8;xi++)
{
gfx_offset = ((x+(y*x_size)) + mc6845_start_addr) & 0x7ff;
gfx_offset+= ((yi >> m_scrn_reg.v400_mode) * 0x800) & 0x3fff;
pen_b = (m_gfx_bitmap_ram[gfx_offset+0x0000+plane*0xc000]>>(7-xi)) & 1;
pen_r = (m_gfx_bitmap_ram[gfx_offset+0x4000+plane*0xc000]>>(7-xi)) & 1;
pen_g = (m_gfx_bitmap_ram[gfx_offset+0x8000+plane*0xc000]>>(7-xi)) & 1;
color = (pen_g<<2 | pen_r<<1 | pen_b<<0) | 8;
pri_mask_val = priority_mixer_pri(color);
if(pri_mask_val & pri) continue;
if((color == 8 && m_scrn_reg.blackclip & 0x10) || (color == 9 && m_scrn_reg.blackclip & 0x20)) // bitmap color clip to black conditions
color = 0;
if(y*(mc6845_tile_height)+yi < cliprect.min_y || y*(mc6845_tile_height)+yi > cliprect.max_y) // partial update TODO: optimize
continue;
x1_draw_pixel(bitmap,y*(mc6845_tile_height)+yi,x*8+xi,color,0,0);
}
}
}
}
}
UINT32 x1_state::screen_update_x1(screen_device &screen, bitmap_rgb32 &bitmap, const rectangle &cliprect)
{
bitmap.fill(rgb_t(0xff,0x00,0x00,0x00), cliprect);
/* TODO: correct calculation thru mc6845 regs */
m_xstart = ((mc6845_h_char_total - mc6845_h_sync_pos) * 8) / 2;
m_ystart = ((mc6845_v_char_total - mc6845_v_sync_pos) * 8) / 2;
// popmessage("%d %d %d %d",mc6845_h_sync_pos,mc6845_v_sync_pos,mc6845_h_char_total,mc6845_v_char_total);
draw_gfxbitmap(bitmap,cliprect,m_scrn_reg.disp_bank,m_scrn_reg.pri);
draw_fgtilemap(bitmap,cliprect);
draw_gfxbitmap(bitmap,cliprect,m_scrn_reg.disp_bank,m_scrn_reg.pri^0xff);
return 0;
}
/*************************************
*
* Keyboard MCU simulation
*
*************************************/
UINT16 x1_state::check_keyboard_press()
{
static const char *const portnames[3] = { "key1","key2","key3" };
int i,port_i,scancode;
UINT8 keymod = ioport("key_modifiers")->read() & 0x1f;
UINT32 pad = ioport("tenkey")->read();
UINT32 f_key = ioport("f_keys")->read();
scancode = 0;
for(port_i=0;port_i<3;port_i++)
{
for(i=0;i<32;i++)
{
if((ioport(portnames[port_i])->read()>>i) & 1)
{
//key_flag = 1;
if(keymod & 0x02) // shift not pressed
{
if(scancode >= 0x41 && scancode < 0x5a)
scancode += 0x20; // lowercase
}
else
{
if(scancode >= 0x31 && scancode < 0x3a)
scancode -= 0x10;
if(scancode == 0x30)
{
scancode = 0x3d;
}
}
if((keymod & 0x10) == 0) // graph on
scancode |= 0x80;
return scancode;
}
scancode++;
}
}
// check numpad
scancode = 0x30;
for(i=0;i<10;i++)
{
if((pad >> i) & 0x01)
{
return scancode | 0x100;
}
scancode++;
}
// check function keys
scancode = 0x71;
for(i=0;i<5;i++)
{
if((f_key >> i) & 0x01)
{
return (scancode + ((keymod & 0x02) ? 0 : 5)) | 0x100;
}
scancode++;
}
return 0;
}
UINT8 x1_state::check_keyboard_shift()
{
UINT8 val = 0xe0;
/*
all of those are active low
x--- ---- TEN: Numpad, Function key, special input key
-x-- ---- KIN: Valid key
--x- ---- REP: Key repeat
---x ---- GRAPH key ON
---- x--- CAPS lock ON
---- -x-- KANA lock ON
---- --x- SHIFT ON
---- ---x CTRL ON
*/
val |= ioport("key_modifiers")->read() & 0x1f;
if(check_keyboard_press() != 0)
val &= ~0x40;
if(check_keyboard_press() & 0x100) //function keys
val &= ~0x80;
return val;
}
UINT8 x1_state::get_game_key(UINT8 port)
{
// key status returned by sub CPU function 0xE3.
// in order from bit 7 to 0:
// port 0: Q,W,E,A,D,Z,X,C
// port 1: numpad 7,4,1,8,2,9,6,3
// port 2: ESC,1,[-],[+],[*],TAB,SPC,RET ([] = numpad)
// bits are active high
UINT8 ret = 0;
if (port == 0)
{
UINT32 key3 = ioport("key3")->read();
if(key3 & 0x00020000) ret |= 0x80; // Q
if(key3 & 0x00800000) ret |= 0x40; // W
if(key3 & 0x00000020) ret |= 0x20; // E
if(key3 & 0x00000002) ret |= 0x10; // A
if(key3 & 0x00000010) ret |= 0x08; // D
if(key3 & 0x04000000) ret |= 0x04; // Z
if(key3 & 0x01000000) ret |= 0x02; // X
if(key3 & 0x00000008) ret |= 0x01; // C
}
else
if (port == 1)
{
UINT32 pad = ioport("tenkey")->read();
if(pad & 0x00000080) ret |= 0x80; // Tenkey 7
if(pad & 0x00000010) ret |= 0x40; // Tenkey 4
if(pad & 0x00000002) ret |= 0x20; // Tenkey 1
if(pad & 0x00000100) ret |= 0x10; // Tenkey 8
if(pad & 0x00000004) ret |= 0x08; // Tenkey 2
if(pad & 0x00000200) ret |= 0x04; // Tenkey 9
if(pad & 0x00000040) ret |= 0x02; // Tenkey 6
if(pad & 0x00000008) ret |= 0x01; // Tenkey 3
}
else
if (port == 2)
{
UINT32 key1 = ioport("key1")->read();
UINT32 key2 = ioport("key2")->read();
UINT32 pad = ioport("tenkey")->read();
if(key1 & 0x08000000) ret |= 0x80; // ESC
if(key2 & 0x00020000) ret |= 0x40; // 1
if(pad & 0x00000400) ret |= 0x20; // Tenkey -
if(pad & 0x00000800) ret |= 0x10; // Tenkey +
if(pad & 0x00001000) ret |= 0x08; // Tenkey *
if(key1 & 0x00000200) ret |= 0x04; // TAB
if(key2 & 0x00000001) ret |= 0x02; // SPC
if(key1 & 0x00002000) ret |= 0x01; // RET
}
return ret;
}
READ8_MEMBER( x1_state::x1_sub_io_r )
{
UINT8 ret,bus_res;
/* Looks like that the HW retains the latest data putted on the bus here, behaviour confirmed by Rally-X */
if(m_sub_obf)
{
bus_res = m_sub_val[m_key_i];
/* FIXME: likely to be different here. */
m_key_i++;
if(m_key_i >= 2)
m_key_i = 0;
return bus_res;
}
#if 0
if(key_flag == 1)
{
key_flag = 0;
return 0x82; //TODO: this is for shift/ctrl/kana lock etc.
}
#endif
m_sub_cmd_length--;
m_sub_obf = (m_sub_cmd_length) ? 0x00 : 0x20;
ret = m_sub_val[m_sub_val_ptr];
m_sub_val_ptr++;
if(m_sub_cmd_length <= 0)
m_sub_val_ptr = 0;
return ret;
}
void x1_state::cmt_command( UINT8 cmd )
{
// CMT deck control command (E9 xx)
// E9 00 - Eject
// E9 01 - Stop
// E9 02 - Play
// E9 03 - Fast Forward
// E9 04 - Rewind
// E9 05 - APSS Fast Forward
// E9 06 - APSS Rewind
// E9 0A - Record
/*
APSS is a Sharp invention and stands for Automatic Program Search System, it scans the tape for silent parts that are bigger than 4 seconds.
It's basically used for audio tapes in order to jump over the next/previous "track".
*/
m_cmt_current_cmd = cmd;
if(m_cassette->get_image() == NULL) //avoid a crash if a disk game tries to access this
return;
switch(cmd)
{
case 0x01: // Stop
m_cassette->change_state(CASSETTE_MOTOR_DISABLED,CASSETTE_MASK_MOTOR);
m_cassette->change_state(CASSETTE_STOPPED,CASSETTE_MASK_UISTATE);
m_cmt_test = 1;
popmessage("CMT: Stop");
break;
case 0x02: // Play
m_cassette->change_state(CASSETTE_MOTOR_ENABLED,CASSETTE_MASK_MOTOR);
m_cassette->change_state(CASSETTE_PLAY,CASSETTE_MASK_UISTATE);
popmessage("CMT: Play");
break;
case 0x03: // Fast Forward
m_cassette->change_state(CASSETTE_MOTOR_DISABLED,CASSETTE_MASK_MOTOR);
m_cassette->change_state(CASSETTE_STOPPED,CASSETTE_MASK_UISTATE);
popmessage("CMT: Fast Forward");
break;
case 0x04: // Rewind
m_cassette->change_state(CASSETTE_MOTOR_DISABLED,CASSETTE_MASK_MOTOR);
m_cassette->change_state(CASSETTE_STOPPED,CASSETTE_MASK_UISTATE);
popmessage("CMT: Rewind");
break;
case 0x05: // APSS Fast Forward
m_cassette->change_state(CASSETTE_MOTOR_DISABLED,CASSETTE_MASK_MOTOR);
m_cassette->change_state(CASSETTE_STOPPED,CASSETTE_MASK_UISTATE);
popmessage("CMT: APSS Fast Forward");
break;
case 0x06: // APSS Rewind
m_cassette->change_state(CASSETTE_MOTOR_DISABLED,CASSETTE_MASK_MOTOR);
m_cassette->change_state(CASSETTE_STOPPED,CASSETTE_MASK_UISTATE);
popmessage("CMT: APSS Rewind");
break;
case 0x0a: // Record
m_cassette->change_state(CASSETTE_MOTOR_ENABLED,CASSETTE_MASK_MOTOR);
m_cassette->change_state(CASSETTE_RECORD,CASSETTE_MASK_UISTATE);
popmessage("CMT: Record");
break;
default:
logerror("Unimplemented or invalid CMT command (0x%02x)\n",cmd);
}
logerror("CMT: Command 0xe9-0x%02x received.\n",cmd);
}
TIMER_DEVICE_CALLBACK_MEMBER(x1_state::x1_cmt_wind_timer)
{
if(m_cassette->get_image() == NULL) //avoid a crash if a disk game tries to access this
return;
switch(m_cmt_current_cmd)
{
case 0x03:
case 0x05: // Fast Forwarding tape
m_cassette->seek(1,SEEK_CUR);
if(m_cassette->get_position() >= m_cassette->get_length()) // at end?
cmt_command(0x01); // Stop tape
break;
case 0x04:
case 0x06: // Rewinding tape
m_cassette->seek(-1,SEEK_CUR);
if(m_cassette->get_position() <= 0) // at beginning?
cmt_command(0x01); // Stop tape
break;
}
}
WRITE8_MEMBER( x1_state::x1_sub_io_w )
{
/* sub-routine at $10e sends to these sub-routines when a keyboard input is triggered:
$17a -> floppy
$094 -> ROM
$0c0 -> timer
$052 -> cmt
$0f5 -> reload sub-routine? */
if(m_sub_cmd == 0xe4)
{
m_key_irq_vector = data;
logerror("Key vector set to 0x%02x\n",data);
data = 0;
}
if(m_sub_cmd == 0xe9)
{
cmt_command(data);
data = 0;
}
if((data & 0xf0) == 0xd0) //reads here tv recording timer data. (Timer set (0xd0) / Timer readout (0xd8))
{
/*
xx-- ---- mode
--xx xxxx interval
*/
m_sub_val[0] = 0;
/*
xxxx xxxx command code:
00 timer disabled
01 TV command
10 interrupt
11 Cassette deck
*/
m_sub_val[1] = 0;
/*
---x xxxx minute
*/
m_sub_val[2] = 0;
/*
---- xxxx hour
*/
m_sub_val[3] = 0;
/*
xxxx ---- month
---- -xxx day of the week
*/
m_sub_val[4] = 0;
/*
--xx xxxx day
*/
m_sub_val[5] = 0;
m_sub_cmd_length = 6;
}
switch(data)
{
case 0xe3: //game key obtaining
m_sub_cmd_length = 3;
m_sub_val[0] = get_game_key(0);
m_sub_val[1] = get_game_key(1);
m_sub_val[2] = get_game_key(2);
break;
case 0xe4: //irq vector setting
break;
//case 0xe5: //timer irq clear
// break;
case 0xe6: //key data readout
m_sub_val[0] = check_keyboard_shift() & 0xff;
m_sub_val[1] = check_keyboard_press() & 0xff;
m_sub_cmd_length = 2;
break;
// case 0xe7: // TV Control
// break;
case 0xe8: // TV Control read-out
m_sub_val[0] = m_sub_cmd;
m_sub_cmd_length = 1;
break;
case 0xe9: // CMT Control
break;
case 0xea: // CMT Control status
m_sub_val[0] = m_cmt_current_cmd;
m_sub_cmd_length = 1;
logerror("CMT: Command 0xEA received, returning 0x%02x.\n",m_sub_val[0]);
break;
case 0xeb: // CMT Tape status
// bit 0 = tape end (0=end of tape)
// bit 1 = tape inserted
// bit 2 = record status (1=OK, 0=write protect)
m_sub_val[0] = 0x05;
if(m_cassette->get_image() != NULL)
m_sub_val[0] |= 0x02;
m_sub_cmd_length = 1;
logerror("CMT: Command 0xEB received, returning 0x%02x.\n",m_sub_val[0]);
break;
// case 0xec: //set date
// break;
case 0xed: //get date
m_sub_val[0] = m_rtc.day;
m_sub_val[1] = (m_rtc.month<<4) | (m_rtc.wday & 0xf);
m_sub_val[2] = m_rtc.year;
m_sub_cmd_length = 3;
break;
// case 0xee: //set time
// break;
case 0xef: //get time
m_sub_val[0] = m_rtc.hour;
m_sub_val[1] = m_rtc.min;
m_sub_val[2] = m_rtc.sec;
m_sub_cmd_length = 3;
break;
}
m_sub_cmd = data;
m_sub_obf = (m_sub_cmd_length) ? 0x00 : 0x20;
if(data != 0xe6)
logerror("SUB: Command byte 0x%02x\n",data);
}
/*************************************
*
* ROM Image / Banking Handling
*
*************************************/
READ8_MEMBER( x1_state::x1_rom_r )
{
UINT8 *rom = memregion("cart_img")->base();
// printf("%06x\n",m_rom_index[0]<<16|m_rom_index[1]<<8|m_rom_index[2]<<0);
return rom[m_rom_index[0]<<16|m_rom_index[1]<<8|m_rom_index[2]<<0];
}
WRITE8_MEMBER( x1_state::x1_rom_w )
{
m_rom_index[offset] = data;
}
WRITE8_MEMBER( x1_state::x1_rom_bank_0_w )
{
m_ram_bank = 0x10;
}
WRITE8_MEMBER( x1_state::x1_rom_bank_1_w )
{
m_ram_bank = 0x00;
}
/*************************************
*
* MB8877A FDC (wd17XX compatible)
*
*************************************/
READ8_MEMBER( x1_state::x1_fdc_r )
{
//UINT8 ret = 0;
switch(offset+0xff8)
{
case 0x0ff8:
return m_fdc->status_r(space, offset);
case 0x0ff9:
return m_fdc->track_r(space, offset);
case 0x0ffa:
return m_fdc->sector_r(space, offset);
case 0x0ffb:
return m_fdc->data_r(space, offset);
case 0x0ffc:
printf("FDC: read FM type\n");
return 0xff;
case 0x0ffd:
printf("FDC: read MFM type\n");
return 0xff;
case 0x0ffe:
printf("FDC: read 1.6M type\n");
return 0xff;
case 0x0fff:
printf("FDC: switching between 500k/1M\n");
return 0xff;
}
return 0x00;
}
WRITE8_MEMBER( x1_state::x1_fdc_w )
{
switch(offset+0xff8)
{
case 0x0ff8:
m_fdc->command_w(space, offset,data);
break;
case 0x0ff9:
m_fdc->track_w(space, offset,data);
break;
case 0x0ffa:
m_fdc->sector_w(space, offset,data);
break;
case 0x0ffb:
m_fdc->data_w(space, offset,data);
break;
case 0x0ffc:
m_fdc->set_drive(data & 3);
floppy_get_device(machine(), data & 3)->floppy_mon_w(!BIT(data, 7));
floppy_get_device(machine(), data & 3)->floppy_drive_set_ready_state(data & 0x80,0);
m_fdc->set_side(BIT(data, 4));
break;
case 0x0ffd:
case 0x0ffe:
case 0x0fff:
logerror("FDC: undefined write to %04x = %02x\n",offset+0xff8,data);
break;
}
}
WRITE_LINE_MEMBER(x1_state::fdc_drq_w)
{
m_dma->rdy_w(state ^ 1);
}
/*************************************
*
* Programmable Character Generator
*
*************************************/
UINT16 x1_state::check_pcg_addr()
{
if(m_avram[0x7ff] & 0x20) return 0x7ff;
if(m_avram[0x3ff] & 0x20) return 0x3ff;
if(m_avram[0x5ff] & 0x20) return 0x5ff;
if(m_avram[0x1ff] & 0x20) return 0x1ff;
return 0x3ff;
}
UINT16 x1_state::check_chr_addr()
{
if(!(m_avram[0x7ff] & 0x20)) return 0x7ff;
if(!(m_avram[0x3ff] & 0x20)) return 0x3ff;
if(!(m_avram[0x5ff] & 0x20)) return 0x5ff;
if(!(m_avram[0x1ff] & 0x20)) return 0x1ff;
return 0x3ff;
}
UINT16 x1_state::get_pcg_addr( UINT16 width, UINT8 y_char_size )
{
int hbeam = machine().first_screen()->hpos() >> 3;
int vbeam = machine().first_screen()->vpos() / y_char_size;
UINT16 pcg_offset = ((hbeam + vbeam*width) + (((m_crtc_vreg[0x0c]<<8) & 0x3f00) | (m_crtc_vreg[0x0d] & 0xff))) & 0x7ff;
//printf("%08x %d %d %d %d\n",(hbeam+vbeam*width),hbeam,vbeam,machine.first_screen()->vpos() & 7,width);
return pcg_offset;
}
READ8_MEMBER( x1_state::x1_pcg_r )
{
int addr;
int pcg_offset;
UINT8 res;
UINT8 *gfx_data;
addr = (offset & 0x300) >> 8;
if(addr == 0 && m_scrn_reg.pcg_mode) // Kanji ROM read, X1Turbo only
{
gfx_data = m_kanji_rom;
pcg_offset = (m_tvram[check_chr_addr()]+(m_kvram[check_chr_addr()]<<8)) & 0xfff;
pcg_offset*=0x20;
pcg_offset+=(offset & 0x0f);
pcg_offset+=(m_kvram[check_chr_addr()] & 0x40) >> 2; //left-right check
res = gfx_data[pcg_offset];
}
else
{
UINT8 y_char_size;
/* addr == 0 reads from the ANK rom */
gfx_data = addr == 0 ? m_cg_rom : m_pcg_ram;
y_char_size = ((m_crtc_vreg[9]+1) > 8) ? 8 : m_crtc_vreg[9]+1;
if(y_char_size == 0) { y_char_size = 1; }
pcg_offset = m_tvram[get_pcg_addr(m_crtc_vreg[1], y_char_size)]*8;
pcg_offset+= machine().first_screen()->vpos() & (y_char_size-1);
if(addr) { pcg_offset+= ((addr-1)*0x800); }
res = gfx_data[pcg_offset];
}
return res;
}
WRITE8_MEMBER( x1_state::x1_pcg_w )
{
int addr,pcg_offset;
addr = (offset & 0x300) >> 8;
if(addr == 0)
{
/* NOP */
logerror("Warning: write to the ANK area! %04x %02x\n",offset,data);
}
else
{
if(m_scrn_reg.pcg_mode) // Hi-Speed Mode, X1Turbo only
{
pcg_offset = m_tvram[check_pcg_addr()]*8;
pcg_offset+= (offset & 0xe) >> 1;
pcg_offset+=((addr-1)*0x800);
m_pcg_ram[pcg_offset] = data;
pcg_offset &= 0x7ff;
m_gfxdecode->gfx(3)->mark_dirty(pcg_offset >> 3);
}
else // Compatible Mode
{
UINT8 y_char_size;
/* TODO: Brain Breaker doesn't work with this arrangement in high resolution mode, check out why */
y_char_size = (m_crtc_vreg[9]+1) > 8 ? (m_crtc_vreg[9]+1)-8 : m_crtc_vreg[9]+1;
if(y_char_size == 0) { y_char_size = 1; }
pcg_offset = m_tvram[get_pcg_addr(m_crtc_vreg[1], y_char_size)]*8;
pcg_offset+= machine().first_screen()->vpos() & (y_char_size-1);
pcg_offset+= ((addr-1)*0x800);
m_pcg_ram[pcg_offset] = data;
pcg_offset &= 0x7ff;
m_gfxdecode->gfx(3)->mark_dirty(pcg_offset >> 3);
}
}
}
/*************************************
*
* Other Video-related functions
*
*************************************/
/* for bitmap mode */
void x1_state::set_current_palette()
{
UINT8 addr,r,g,b;
for(addr=0;addr<8;addr++)
{
r = ((m_x_r)>>(addr)) & 1;
g = ((m_x_g)>>(addr)) & 1;
b = ((m_x_b)>>(addr)) & 1;
m_palette->set_pen_color(addr|8, pal1bit(r), pal1bit(g), pal1bit(b));
}
}
WRITE8_MEMBER( x1_state::x1turboz_4096_palette_w )
{
UINT32 pal_entry;
UINT8 r,g,b;
pal_entry = ((offset & 0xff) << 4) | ((data & 0xf0) >> 4);
m_pal_4096[pal_entry+((offset & 0x300)<<4)] = data & 0xf;
r = m_pal_4096[pal_entry+(1<<12)];
g = m_pal_4096[pal_entry+(2<<12)];
b = m_pal_4096[pal_entry+(0<<12)];
m_palette->set_pen_color(pal_entry+16, pal3bit(r), pal3bit(g), pal3bit(b));
}
/* Note: docs claims that reading the palette ports makes the value to change somehow in X1 mode ...
In 4096 color mode, it's used for reading the value back. */
WRITE8_MEMBER( x1_state::x1_pal_r_w )
{
if(m_turbo_reg.pal & 0x80) //AEN bit, Turbo Z
{
if(m_turbo_reg.gfx_pal & 0x80) //APEN bit
x1turboz_4096_palette_w(space,offset & 0x3ff,data);
}
else //compatible mode
{
m_x_r = data;
set_current_palette();
//if(m_old_vpos != machine().first_screen()->vpos())
//{
// machine().first_screen()->update_partial(machine().first_screen()->vpos());
// m_old_vpos = machine().first_screen()->vpos();
//}
}
}
WRITE8_MEMBER( x1_state::x1_pal_g_w )
{
if(m_turbo_reg.pal & 0x80) //AEN bit, Turbo Z
{
if(m_turbo_reg.gfx_pal & 0x80) //APEN bit
x1turboz_4096_palette_w(space,offset & 0x3ff,data);
}
else
{
m_x_g = data;
set_current_palette();
//if(m_old_vpos != machine().first_screen()->vpos())
//{
machine().first_screen()->update_partial(machine().first_screen()->vpos());
// m_old_vpos = machine().first_screen()->vpos();
//}
}
}
WRITE8_MEMBER( x1_state::x1_pal_b_w )
{
if(m_turbo_reg.pal & 0x80) //AEN bit, Turbo Z
{
if(m_turbo_reg.gfx_pal & 0x80) //APEN bit
x1turboz_4096_palette_w(space,offset & 0x3ff,data);
}
else
{
m_x_b = data;
set_current_palette();
//if(m_old_vpos != machine().first_screen()->vpos())
//{
// machine().first_screen()->update_partial(machine().first_screen()->vpos());
// m_old_vpos = machine().first_screen()->vpos();
//}
}
}
WRITE8_MEMBER( x1_state::x1_ex_gfxram_w )
{
UINT8 ex_mask;
if ( offset <= 0x3fff) { ex_mask = 7; }
else if(offset >= 0x4000 && offset <= 0x7fff) { ex_mask = 6; }
else if(offset >= 0x8000 && offset <= 0xbfff) { ex_mask = 5; }
else { ex_mask = 3; }
if(ex_mask & 1) { m_gfx_bitmap_ram[(offset & 0x3fff)+0x0000+(m_scrn_reg.gfx_bank*0xc000)] = data; }
if(ex_mask & 2) { m_gfx_bitmap_ram[(offset & 0x3fff)+0x4000+(m_scrn_reg.gfx_bank*0xc000)] = data; }
if(ex_mask & 4) { m_gfx_bitmap_ram[(offset & 0x3fff)+0x8000+(m_scrn_reg.gfx_bank*0xc000)] = data; }
}
/*
SCRN flags
d0(01) = 0:low resolution (15KHz) 1: high resolution (24KHz)
d1(02) = 0:1 raster / pixel 1:2 raster / pixel
d2(04) = 0:8 rasters / CHR 1:16 rasters / CHR
d3(08) = 0:bank 0 0:bank 1 <- display
d4(10) = 0:bank 0 0:bank 1 <- access
d5(20) = 0:compatibility 1:high speed <- define PCG mode
d6(40) = 0:8-raster graphics 1:16-raster graphics
d7(80) = 0:don't display 1:display <- underline (when 1, graphics are not displayed)
*/
WRITE8_MEMBER( x1_state::x1_scrn_w )
{
m_scrn_reg.pcg_mode = BIT(data, 5);
m_scrn_reg.gfx_bank = BIT(data, 4);
m_scrn_reg.disp_bank = BIT(data, 3);
m_scrn_reg.ank_sel = BIT(data, 2);
m_scrn_reg.v400_mode = ((data & 0x03) == 3) ? 1 : 0;
if(data & 0x80)
printf("SCRN = %02x\n",data & 0x80);
if((data & 0x03) == 1)
printf("SCRN sets true 400 lines mode\n");
}
WRITE8_MEMBER( x1_state::x1_pri_w )
{
m_scrn_reg.pri = data;
// printf("PRI = %02x\n",data);
}
WRITE8_MEMBER( x1_state::x1_6845_w )
{
if(offset == 0)
{
m_crtc_index = data & 31;
machine().device<mc6845_device>("crtc")->address_w(space, offset, data);
}
else
{
m_crtc_vreg[m_crtc_index] = data;
machine().device<mc6845_device>("crtc")->register_w(space, offset, data);
}
}
READ8_MEMBER( x1_state::x1turboz_blackclip_r )
{
/* TODO: this returns only on x1turboz */
return m_scrn_reg.blackclip;
}
WRITE8_MEMBER( x1_state::x1turbo_blackclip_w )
{
/*
-x-- ---- replace blanking duration with black
--x- ---- replace bitmap palette 1 with black
---x ---- replace bitmap palette 0 with black
---- x--- enable text blackclip
---- -xxx palette color number for text black
*/
m_scrn_reg.blackclip = data;
if(data & 0x40)
printf("Blackclip data access %02x\n",data);
}
READ8_MEMBER( x1_state::x1turbo_pal_r )
{
return m_turbo_reg.pal;
}
READ8_MEMBER( x1_state::x1turbo_txpal_r )
{
return m_turbo_reg.txt_pal[offset];
}
READ8_MEMBER( x1_state::x1turbo_txdisp_r )
{
return m_turbo_reg.txt_disp;
}
READ8_MEMBER( x1_state::x1turbo_gfxpal_r )
{
return m_turbo_reg.gfx_pal;
}
WRITE8_MEMBER( x1_state::x1turbo_pal_w )
{
printf("TURBO PAL %02x\n",data);
m_turbo_reg.pal = data;
}
WRITE8_MEMBER( x1_state::x1turbo_txpal_w )
{
int r,g,b;
printf("TURBO TEXT PAL %02x %02x\n",data,offset);
m_turbo_reg.txt_pal[offset] = data;
if(m_turbo_reg.pal & 0x80)
{
r = (data & 0x0c) >> 2;
g = (data & 0x30) >> 4;
b = (data & 0x03) >> 0;
m_palette->set_pen_color(offset, pal2bit(r), pal2bit(g), pal2bit(b));
}
}
WRITE8_MEMBER( x1_state::x1turbo_txdisp_w )
{
printf("TURBO TEXT DISPLAY %02x\n",data);
m_turbo_reg.txt_disp = data;
}
WRITE8_MEMBER( x1_state::x1turbo_gfxpal_w )
{
printf("TURBO GFX PAL %02x\n",data);
m_turbo_reg.gfx_pal = data;
}
/*
* FIXME: bit-wise this doesn't make any sense, I guess that it uses the lv 2 kanji roms
* Test cases for this port so far are Hyper Olympics '84 disk version and Might & Magic.
*/
UINT16 x1_state::jis_convert(int kanji_addr)
{
if(kanji_addr >= 0x0e00 && kanji_addr <= 0x0e9f) { kanji_addr -= 0x0e00; kanji_addr &= 0x0ff; return ((0x0e0) + (kanji_addr >> 3)) << 4; } // numbers
if(kanji_addr >= 0x0f00 && kanji_addr <= 0x109f) { kanji_addr -= 0x0f00; kanji_addr &= 0x1ff; return ((0x4c0) + (kanji_addr >> 3)) << 4; } // lower case chars
if(kanji_addr >= 0x1100 && kanji_addr <= 0x129f) { kanji_addr -= 0x1100; kanji_addr &= 0x1ff; return ((0x2c0) + (kanji_addr >> 3)) << 4; } // upper case chars
if(kanji_addr >= 0x0100 && kanji_addr <= 0x01ff) { kanji_addr -= 0x0100; kanji_addr &= 0x0ff; return ((0x040) + (kanji_addr >> 3)) << 4; } // grammar symbols
if(kanji_addr >= 0x0500 && kanji_addr <= 0x06ff) { kanji_addr -= 0x0500; kanji_addr &= 0x1ff; return ((0x240) + (kanji_addr >> 3)) << 4; } // math symbols
if(kanji_addr >= 0x0300 && kanji_addr <= 0x04ff) { kanji_addr -= 0x0300; kanji_addr &= 0x1ff; return ((0x440) + (kanji_addr >> 3)) << 4; } // parentesis
if(kanji_addr != 0x0720 && kanji_addr != 0x0730)
printf("%08x\n",kanji_addr);
return 0x0000;
}
READ8_MEMBER( x1_state::x1_kanji_r )
{
UINT8 res;
res = m_kanji_rom[jis_convert(m_kanji_addr & 0xfff0)+(offset*0x10)+(m_kanji_addr & 0xf)];
if(offset == 1)
m_kanji_addr_latch++;
return res;
}
WRITE8_MEMBER( x1_state::x1_kanji_w )
{
// if(offset < 2)
switch(offset)
{
case 0: m_kanji_addr_latch = (data & 0xff)|(m_kanji_addr_latch&0xff00); break;
case 1: m_kanji_addr_latch = (data<<8)|(m_kanji_addr_latch&0x00ff);
//if(m_kanji_addr_latch != 0x720 && m_kanji_addr_latch != 0x730)
// printf("%08x\n",m_kanji_addr_latch);
break;
case 2:
{
/* 0 -> selects Expanded EEPROM */
/* 1 -> selects Kanji ROM */
/* 0 -> 1 -> latches Kanji ROM data */
if(((m_kanji_eksel & 1) == 0) && ((data & 1) == 1))
{
m_kanji_addr = (m_kanji_addr_latch);
//m_kanji_addr &= 0x3fff; //<- temp kludge until the rom is redumped.
//printf("%08x\n",m_kanji_addr);
//m_kanji_addr+= m_kanji_count;
}
m_kanji_eksel = data & 1;
}
break;
}
}
READ8_MEMBER( x1_state::x1_emm_r )
{
UINT8 res;
if(offset & ~3)
{
printf("Warning: read EMM BASIC area [%02x]\n",offset & 0xff);
return 0xff;
}
if(offset != 3)
printf("Warning: read EMM address [%02x]\n",offset);
res = 0xff;
if(offset == 3)
{
res = m_emm_ram[m_emm_addr];
m_emm_addr++;
}
return res;
}
WRITE8_MEMBER( x1_state::x1_emm_w )
{
if(offset & ~3)
{
printf("Warning: write EMM BASIC area [%02x] %02x\n",offset & 0xff,data);
return;
}
switch(offset)
{
case 0: m_emm_addr = (m_emm_addr & 0xffff00) | (data & 0xff); break;
case 1: m_emm_addr = (m_emm_addr & 0xff00ff) | (data << 8); break;
case 2: m_emm_addr = (m_emm_addr & 0x00ffff) | (data << 16); break; //TODO: this has a max size limit, check exactly how much
case 3:
m_emm_ram[m_emm_addr] = data;
m_emm_addr++;
break;
}
}
/*
CZ-141SF, CZ-127MF, X1turboZII, X1turboZ3 boards
*/
READ8_MEMBER( x1_state::x1turbo_bank_r )
{
// printf("BANK access read\n");
return m_ex_bank & 0x3f;
}
WRITE8_MEMBER( x1_state::x1turbo_bank_w )
{
//UINT8 *RAM = memregion("x1_cpu")->base();
/*
--x- ---- BML5: latch bit (doesn't have any real function)
---x ---- BMCS: select bank RAM, active low
---- xxxx BMNO: Bank memory ID
*/
m_ex_bank = data & 0x3f;
// printf("BANK access write %02x\n",data);
}
/* TODO: waitstate penalties */
READ8_MEMBER( x1_state::x1_mem_r )
{
if((offset & 0x8000) == 0 && (m_ram_bank == 0))
{
return m_ipl_rom[offset]; //ROM
}
return m_work_ram[offset]; //RAM
}
WRITE8_MEMBER( x1_state::x1_mem_w )
{
m_work_ram[offset] = data; //RAM
}
READ8_MEMBER( x1_state::x1turbo_mem_r )
{
if((m_ex_bank & 0x10) == 0)
return m_work_ram[offset+((m_ex_bank & 0xf)*0x10000)];
return x1_mem_r(space,offset);
}
WRITE8_MEMBER( x1_state::x1turbo_mem_w )
{
if((m_ex_bank & 0x10) == 0)
m_work_ram[offset+((m_ex_bank & 0xf)*0x10000)] = data; //RAM
else
x1_mem_w(space,offset,data);
}
/*************************************
*
* Memory maps
*
*************************************/
READ8_MEMBER( x1_state::x1_io_r )
{
m_io_bank_mode = 0; //any read disables the extended mode.
if(offset == 0x0e03) { return x1_rom_r(space, 0); }
// TODO: user could install ym2151 on plain X1 too
//0x700, 0x701
//if(offset >= 0x0704 && offset <= 0x0707) { return z80ctc_r(m_ctc, offset-0x0704); }
else if(offset >= 0x0ff8 && offset <= 0x0fff) { return x1_fdc_r(space, offset-0xff8); }
else if(offset >= 0x1400 && offset <= 0x17ff) { return x1_pcg_r(space, offset-0x1400); }
else if(offset >= 0x1900 && offset <= 0x19ff) { return x1_sub_io_r(space, 0); }
else if(offset >= 0x1a00 && offset <= 0x1aff) { return machine().device<i8255_device>("ppi8255_0")->read(space, (offset-0x1a00) & 3); }
else if(offset >= 0x1b00 && offset <= 0x1bff) { return machine().device<ay8910_device>("ay")->data_r(space, 0); }
// else if(offset >= 0x1f80 && offset <= 0x1f8f) { return z80dma_r(machine().device("dma"), 0); }
// else if(offset >= 0x1f90 && offset <= 0x1f91) { return z80sio_c_r(machine().device("sio"), (offset-0x1f90) & 1); }
// else if(offset >= 0x1f92 && offset <= 0x1f93) { return z80sio_d_r(machine().device("sio"), (offset-0x1f92) & 1); }
else if(offset >= 0x1fa0 && offset <= 0x1fa3) { return m_ctc->read(space,offset-0x1fa0); }
else if(offset >= 0x1fa8 && offset <= 0x1fab) { return m_ctc->read(space,offset-0x1fa8); }
// else if(offset >= 0x1fd0 && offset <= 0x1fdf) { return x1_scrn_r(space,offset-0x1fd0); }
// else if(offset == 0x1fe0) { return x1turboz_blackclip_r(space,0); }
else if(offset >= 0x2000 && offset <= 0x2fff) { return m_avram[offset & 0x7ff]; }
else if(offset >= 0x3000 && offset <= 0x3fff) { return m_tvram[offset & 0x7ff]; } // Ys checks if it's a x1/x1turbo machine by checking if this area is a mirror
else if(offset >= 0x4000 && offset <= 0xffff) { return m_gfx_bitmap_ram[offset-0x4000+(m_scrn_reg.gfx_bank*0xc000)]; }
else
{
//logerror("(PC=%06x) Read i/o address %04x\n",space.device().safe_pc(),offset);
}
return 0xff;
}
WRITE8_MEMBER( x1_state::x1_io_w )
{
if(m_io_bank_mode == 1) { x1_ex_gfxram_w(space, offset, data); }
// TODO: user could install ym2151 on plain X1 too
//0x700, 0x701
// else if(offset >= 0x0704 && offset <= 0x0707) { z80ctc_w(m_ctc, offset-0x0704,data); }
// else if(offset >= 0x0c00 && offset <= 0x0cff) { x1_rs232c_w(machine(), 0, data); }
else if(offset >= 0x0e00 && offset <= 0x0e02) { x1_rom_w(space, offset-0xe00,data); }
// else if(offset >= 0x0e80 && offset <= 0x0e82) { x1_kanji_w(machine(), offset-0xe80,data); }
else if(offset >= 0x0ff8 && offset <= 0x0fff) { x1_fdc_w(space, offset-0xff8,data); }
else if(offset >= 0x1000 && offset <= 0x10ff) { x1_pal_b_w(space, 0,data); }
else if(offset >= 0x1100 && offset <= 0x11ff) { x1_pal_r_w(space, 0,data); }
else if(offset >= 0x1200 && offset <= 0x12ff) { x1_pal_g_w(space, 0,data); }
else if(offset >= 0x1300 && offset <= 0x13ff) { x1_pri_w(space, 0,data); }
else if(offset >= 0x1400 && offset <= 0x17ff) { x1_pcg_w(space, offset-0x1400,data); }
else if(offset == 0x1800 || offset == 0x1801) { x1_6845_w(space, offset-0x1800, data); }
else if(offset >= 0x1900 && offset <= 0x19ff) { x1_sub_io_w(space, 0,data); }
else if(offset >= 0x1a00 && offset <= 0x1aff) { machine().device<i8255_device>("ppi8255_0")->write(space, (offset-0x1a00) & 3,data); }
else if(offset >= 0x1b00 && offset <= 0x1bff) { machine().device<ay8910_device>("ay")->data_w(space, 0,data); }
else if(offset >= 0x1c00 && offset <= 0x1cff) { machine().device<ay8910_device>("ay")->address_w(space, 0,data); }
else if(offset >= 0x1d00 && offset <= 0x1dff) { x1_rom_bank_1_w(space,0,data); }
else if(offset >= 0x1e00 && offset <= 0x1eff) { x1_rom_bank_0_w(space,0,data); }
// else if(offset >= 0x1f80 && offset <= 0x1f8f) { z80dma_w(machine().device("dma"), 0,data); }
// else if(offset >= 0x1f90 && offset <= 0x1f91) { z80sio_c_w(machine().device("sio"), (offset-0x1f90) & 1,data); }
// else if(offset >= 0x1f92 && offset <= 0x1f93) { z80sio_d_w(machine().device("sio"), (offset-0x1f92) & 1,data); }
else if(offset >= 0x1fa0 && offset <= 0x1fa3) { m_ctc->write(space,offset-0x1fa0,data); }
else if(offset >= 0x1fa8 && offset <= 0x1fab) { m_ctc->write(space,offset-0x1fa8,data); }
// else if(offset == 0x1fb0) { x1turbo_pal_w(space,0,data); }
// else if(offset >= 0x1fb9 && offset <= 0x1fbf) { x1turbo_txpal_w(space,offset-0x1fb9,data); }
// else if(offset == 0x1fc0) { x1turbo_txdisp_w(space,0,data); }
// else if(offset == 0x1fc5) { x1turbo_gfxpal_w(space,0,data); }
// else if(offset >= 0x1fd0 && offset <= 0x1fdf) { x1_scrn_w(space,0,data); }
// else if(offset == 0x1fe0) { x1turbo_blackclip_w(space,0,data); }
else if(offset >= 0x2000 && offset <= 0x2fff) { m_avram[offset & 0x7ff] = data; }
else if(offset >= 0x3000 && offset <= 0x3fff) { m_tvram[offset & 0x7ff] = data; }
else if(offset >= 0x4000 && offset <= 0xffff) { m_gfx_bitmap_ram[offset-0x4000+(m_scrn_reg.gfx_bank*0xc000)] = data; }
else
{
//logerror("(PC=%06x) Write %02x at i/o address %04x\n",space.device().safe_pc(),data,offset);
}
}
/* TODO: I should actually simplify this, by just overwriting X1 Turbo specifics here, and call plain X1 functions otherwise */
READ8_MEMBER( x1_state::x1turbo_io_r )
{
m_io_bank_mode = 0; //any read disables the extended mode.
// a * at the end states devices used on plain X1 too
if(offset == 0x0700) { return (machine().device<ym2151_device>("ym")->read(space, offset-0x0700) & 0x7f) | (ioport("SOUND_SW")->read() & 0x80); }
else if(offset == 0x0701) { return machine().device<ym2151_device>("ym")->read(space, offset-0x0700); }
//0x704 is FM sound detection port on X1 turboZ
else if(offset >= 0x0704 && offset <= 0x0707) { return m_ctc->read(space,offset-0x0704); }
else if(offset == 0x0801) { printf("Color image board read\n"); return 0xff; } // *
else if(offset == 0x0803) { printf("Color image board 2 read\n"); return 0xff; } // *
else if(offset >= 0x0a00 && offset <= 0x0a07) { printf("Stereoscopic board read %04x\n",offset); return 0xff; } // *
else if(offset == 0x0b00) { return x1turbo_bank_r(space,0); }
else if(offset >= 0x0c00 && offset <= 0x0cff) { printf("RS-232C read %04x\n",offset); return 0; } // *
else if(offset >= 0x0d00 && offset <= 0x0dff) { return x1_emm_r(space,offset & 0xff); } // *
else if(offset == 0x0e03) { return x1_rom_r(space, 0); }
else if(offset >= 0x0e80 && offset <= 0x0e81) { return x1_kanji_r(space, offset-0xe80); }
else if(offset >= 0x0fd0 && offset <= 0x0fd3) { /* printf("SASI HDD read %04x\n",offset); */ return 0xff; } // *
else if(offset >= 0x0fe8 && offset <= 0x0fef) { printf("8-inch FD read %04x\n",offset); return 0xff; } // *
else if(offset >= 0x0ff8 && offset <= 0x0fff) { return x1_fdc_r(space, offset-0xff8); }
else if(offset >= 0x1400 && offset <= 0x17ff) { return x1_pcg_r(space, offset-0x1400); }
else if(offset >= 0x1900 && offset <= 0x19ff) { return x1_sub_io_r(space, 0); }
else if(offset >= 0x1a00 && offset <= 0x1aff) { return machine().device<i8255_device>("ppi8255_0")->read(space, (offset-0x1a00) & 3); }
else if(offset >= 0x1b00 && offset <= 0x1bff) { return machine().device<ay8910_device>("ay")->data_r(space, 0); }
else if(offset >= 0x1f80 && offset <= 0x1f8f) { return m_dma->read(space, 0); }
else if(offset >= 0x1f90 && offset <= 0x1f93) { return machine().device<z80sio0_device>("sio")->ba_cd_r(space, (offset-0x1f90) & 3); }
else if(offset >= 0x1f98 && offset <= 0x1f9f) { printf("Extended SIO/CTC read %04x\n",offset); return 0xff; }
else if(offset >= 0x1fa0 && offset <= 0x1fa3) { return m_ctc->read(space,offset-0x1fa0); }
else if(offset >= 0x1fa8 && offset <= 0x1fab) { return m_ctc->read(space,offset-0x1fa8); }
else if(offset == 0x1fb0) { return x1turbo_pal_r(space,0); } // Z only!
else if(offset >= 0x1fb8 && offset <= 0x1fbf) { return x1turbo_txpal_r(space,offset-0x1fb8); } //Z only!
else if(offset == 0x1fc0) { return x1turbo_txdisp_r(space,0); } // Z only!
else if(offset == 0x1fc5) { return x1turbo_gfxpal_r(space,0); } // Z only!
// else if(offset >= 0x1fd0 && offset <= 0x1fdf) { return x1_scrn_r(space,offset-0x1fd0); } //Z only
else if(offset == 0x1fe0) { return x1turboz_blackclip_r(space,0); }
else if(offset == 0x1ff0) { return ioport("X1TURBO_DSW")->read(); }
else if(offset >= 0x2000 && offset <= 0x2fff) { return m_avram[offset & 0x7ff]; }
else if(offset >= 0x3000 && offset <= 0x37ff) { return m_tvram[offset & 0x7ff]; }
else if(offset >= 0x3800 && offset <= 0x3fff) { return m_kvram[offset & 0x7ff]; }
else if(offset >= 0x4000 && offset <= 0xffff) { return m_gfx_bitmap_ram[offset-0x4000+(m_scrn_reg.gfx_bank*0xc000)]; }
else
{
//logerror("(PC=%06x) Read i/o address %04x\n",space.device().safe_pc(),offset);
}
return 0xff;
}
WRITE8_MEMBER( x1_state::x1turbo_io_w )
{
// a * at the end states devices used on plain X1 too
if(m_io_bank_mode == 1) { x1_ex_gfxram_w(space, offset, data); }
else if(offset == 0x0700 || offset == 0x0701) { machine().device<ym2151_device>("ym")->write(space, offset-0x0700,data); }
//0x704 is FM sound detection port on X1 turboZ
else if(offset >= 0x0704 && offset <= 0x0707) { m_ctc->write(space,offset-0x0704,data); }
else if(offset == 0x0800) { printf("Color image board write %02x\n",data); } // *
else if(offset == 0x0802) { printf("Color image board 2 write %02x\n",data); } // *
else if(offset >= 0x0a00 && offset <= 0x0a07) { printf("Stereoscopic board write %04x %02x\n",offset,data); } // *
else if(offset == 0x0b00) { x1turbo_bank_w(space,0,data); }
else if(offset >= 0x0c00 && offset <= 0x0cff) { printf("RS-232C write %04x %02x\n",offset,data); } // *
else if(offset >= 0x0d00 && offset <= 0x0dff) { x1_emm_w(space,offset & 0xff,data); } // *
else if(offset >= 0x0e00 && offset <= 0x0e02) { x1_rom_w(space, offset-0xe00,data); }
else if(offset >= 0x0e80 && offset <= 0x0e83) { x1_kanji_w(space, offset-0xe80,data); }
else if(offset >= 0x0fd0 && offset <= 0x0fd3) { printf("SASI HDD write %04x %02x\n",offset,data); } // *
else if(offset >= 0x0fe8 && offset <= 0x0fef) { printf("8-inch FD write %04x %02x\n",offset,data); } // *
else if(offset >= 0x0ff8 && offset <= 0x0fff) { x1_fdc_w(space, offset-0xff8,data); }
else if(offset >= 0x1000 && offset <= 0x10ff) { x1_pal_b_w(space, offset & 0x3ff,data); }
else if(offset >= 0x1100 && offset <= 0x11ff) { x1_pal_r_w(space, offset & 0x3ff,data); }
else if(offset >= 0x1200 && offset <= 0x12ff) { x1_pal_g_w(space, offset & 0x3ff,data); }
else if(offset >= 0x1300 && offset <= 0x13ff) { x1_pri_w(space, 0,data); }
else if(offset >= 0x1400 && offset <= 0x17ff) { x1_pcg_w(space, offset-0x1400,data); }
else if(offset == 0x1800 || offset == 0x1801) { x1_6845_w(space, offset-0x1800, data); }
else if(offset >= 0x1900 && offset <= 0x19ff) { x1_sub_io_w(space, 0,data); }
else if(offset >= 0x1a00 && offset <= 0x1aff) { machine().device<i8255_device>("ppi8255_0")->write(space, (offset-0x1a00) & 3,data); }
else if(offset >= 0x1b00 && offset <= 0x1bff) { machine().device<ay8910_device>("ay")->data_w(space, 0,data); }
else if(offset >= 0x1c00 && offset <= 0x1cff) { machine().device<ay8910_device>("ay")->address_w(space, 0,data); }
else if(offset >= 0x1d00 && offset <= 0x1dff) { x1_rom_bank_1_w(space,0,data); }
else if(offset >= 0x1e00 && offset <= 0x1eff) { x1_rom_bank_0_w(space,0,data); }
else if(offset >= 0x1f80 && offset <= 0x1f8f) { m_dma->write(space, 0,data); }
else if(offset >= 0x1f90 && offset <= 0x1f93) { machine().device<z80sio0_device>("sio")->ba_cd_w(space, (offset-0x1f90) & 3,data); }
else if(offset >= 0x1f98 && offset <= 0x1f9f) { printf("Extended SIO/CTC write %04x %02x\n",offset,data); }
else if(offset >= 0x1fa0 && offset <= 0x1fa3) { m_ctc->write(space,offset-0x1fa0,data); }
else if(offset >= 0x1fa8 && offset <= 0x1fab) { m_ctc->write(space,offset-0x1fa8,data); }
else if(offset == 0x1fb0) { x1turbo_pal_w(space,0,data); } // Z only!
else if(offset >= 0x1fb8 && offset <= 0x1fbf) { x1turbo_txpal_w(space,offset-0x1fb8,data); } //Z only!
else if(offset == 0x1fc0) { x1turbo_txdisp_w(space,0,data); } //Z only!
else if(offset == 0x1fc1) { printf("Z image capturing access %02x\n",data); } // Z only!
else if(offset == 0x1fc2) { printf("Z mosaic effect access %02x\n",data); } // Z only!
else if(offset == 0x1fc3) { printf("Z Chroma key access %02x\n",data); } // Z only!
else if(offset == 0x1fc4) { printf("Z Extra scroll config access %02x\n",data); } // Z only!
else if(offset == 0x1fc5) { x1turbo_gfxpal_w(space,0,data); } // Z only!
else if(offset >= 0x1fd0 && offset <= 0x1fdf) { x1_scrn_w(space,0,data); }
else if(offset == 0x1fe0) { x1turbo_blackclip_w(space,0,data); }
else if(offset >= 0x2000 && offset <= 0x2fff) { m_avram[offset & 0x7ff] = data; }
else if(offset >= 0x3000 && offset <= 0x37ff) { m_tvram[offset & 0x7ff] = data; }
else if(offset >= 0x3800 && offset <= 0x3fff) { m_kvram[offset & 0x7ff] = data; }
else if(offset >= 0x4000 && offset <= 0xffff) { m_gfx_bitmap_ram[offset-0x4000+(m_scrn_reg.gfx_bank*0xc000)] = data; }
else
{
//logerror("(PC=%06x) Write %02x at i/o address %04x\n",space.device().safe_pc(),data,offset);
}
}
static ADDRESS_MAP_START( x1_mem, AS_PROGRAM, 8, x1_state )
AM_RANGE(0x0000, 0xffff) AM_READWRITE(x1_mem_r,x1_mem_w)
ADDRESS_MAP_END
static ADDRESS_MAP_START( x1turbo_mem, AS_PROGRAM, 8, x1_state )
AM_RANGE(0x0000, 0xffff) AM_READWRITE(x1turbo_mem_r,x1turbo_mem_w)
ADDRESS_MAP_END
static ADDRESS_MAP_START( x1_io, AS_IO, 8, x1_state )
AM_RANGE(0x0000, 0xffff) AM_READWRITE(x1_io_r, x1_io_w)
ADDRESS_MAP_END
static ADDRESS_MAP_START( x1turbo_io, AS_IO, 8, x1_state )
AM_RANGE(0x0000, 0xffff) AM_READWRITE(x1turbo_io_r, x1turbo_io_w)
ADDRESS_MAP_END
/*************************************
*
* PPI8255
*
*************************************/
READ8_MEMBER( x1_state::x1_porta_r )
{
printf("PPI Port A read\n");
return 0xff;
}
/* this port is system related */
READ8_MEMBER( x1_state::x1_portb_r )
{
//printf("PPI Port B read\n");
/*
x--- ---- "v disp"
-x-- ---- "sub cpu ibf"
--x- ---- "sub cpu obf"
---x ---- ROM/RAM flag (0=ROM, 1=RAM)
---- x--- "busy" <- allow printer data output
---- -x-- "v sync"
---- --x- "cmt read"
---- ---x "cmt test" (active low) <- actually this is "Sub CPU detected BREAK"
*/
UINT8 res = 0;
int vblank_line = m_crtc_vreg[6] * (m_crtc_vreg[9]+1);
int vsync_line = m_crtc_vreg[7] * (m_crtc_vreg[9]+1);
m_vdisp = (machine().first_screen()->vpos() < vblank_line) ? 0x80 : 0x00;
m_vsync = (machine().first_screen()->vpos() < vsync_line) ? 0x00 : 0x04;
// popmessage("%d",vsync_line);
// popmessage("%d",vblank_line);
res = m_ram_bank | m_sub_obf | m_vsync | m_vdisp;
if(m_cassette->input() > 0.03)
res |= 0x02;
// if(cassette_get_state(m_cassette) & CASSETTE_MOTOR_DISABLED)
// res &= ~0x02; // is zero if not playing
// CMT test bit is set low when the CMT Stop command is issued, and becomes
// high again when this bit is read.
res |= 0x01;
if(m_cmt_test != 0)
{
m_cmt_test = 0;
res &= ~0x01;
}
return res;
}
/* I/O system port */
READ8_MEMBER( x1_state::x1_portc_r )
{
//printf("PPI Port C read\n");
/*
x--- ---- Printer port output
-x-- ---- 320 mode (r/w), divider for the pixel clock
--x- ---- i/o mode (r/w)
---x ---- smooth scroll enabled (?)
---- ---x cassette output data
*/
return (m_io_sys & 0x9f) | m_hres_320 | ~m_io_switch;
}
WRITE8_MEMBER( x1_state::x1_porta_w )
{
//printf("PPI Port A write %02x\n",data);
}
WRITE8_MEMBER( x1_state::x1_portb_w )
{
//printf("PPI Port B write %02x\n",data);
}
WRITE8_MEMBER( x1_state::x1_portc_w )
{
m_hres_320 = data & 0x40;
/* set up the pixel clock according to the above divider */
m_crtc->set_clock(VDP_CLOCK/((m_hres_320) ? 48 : 24));
if(!BIT(data, 5) && BIT(m_io_switch, 5))
m_io_bank_mode = 1;
m_io_switch = data & 0x20;
m_io_sys = data & 0xff;
m_cassette->output(BIT(data, 0) ? +1.0 : -1.0);
}
READ8_MEMBER(x1_state::memory_read_byte)
{
address_space& prog_space = m_maincpu->space(AS_PROGRAM);
return prog_space.read_byte(offset);
}
WRITE8_MEMBER(x1_state::memory_write_byte)
{
address_space& prog_space = m_maincpu->space(AS_PROGRAM);
return prog_space.write_byte(offset, data);
}
READ8_MEMBER(x1_state::io_read_byte)
{
address_space& prog_space = m_maincpu->space(AS_IO);
return prog_space.read_byte(offset);
}
WRITE8_MEMBER(x1_state::io_write_byte)
{
address_space& prog_space = m_maincpu->space(AS_IO);
return prog_space.write_byte(offset, data);
}
/*************************************
*
* Inputs
*
*************************************/
INPUT_CHANGED_MEMBER(x1_state::ipl_reset)
{
m_maincpu->set_input_line(INPUT_LINE_RESET, newval ? CLEAR_LINE : ASSERT_LINE);
m_ram_bank = 0x00;
if(m_is_turbo) { m_ex_bank = 0x10; }
//anything else?
}
/* Apparently most games doesn't support this (not even the Konami ones!), one that does is...177 :o */
INPUT_CHANGED_MEMBER(x1_state::nmi_reset)
{
m_maincpu->set_input_line(INPUT_LINE_NMI, newval ? CLEAR_LINE : ASSERT_LINE);
}
INPUT_PORTS_START( x1 )
PORT_START("FP_SYS") //front panel buttons, hard-wired with the soft reset/NMI lines
PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_OTHER ) PORT_CHANGED_MEMBER(DEVICE_SELF, x1_state, ipl_reset,0) PORT_NAME("IPL reset")
PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_OTHER ) PORT_CHANGED_MEMBER(DEVICE_SELF, x1_state, nmi_reset,0) PORT_NAME("NMI reset")
PORT_START("SOUND_SW") //FIXME: this is X1Turbo specific
PORT_DIPNAME( 0x80, 0x80, "OPM Sound Setting?" )
PORT_DIPSETTING( 0x80, DEF_STR( Off ) )
PORT_DIPSETTING( 0x00, DEF_STR( On ) )
PORT_START("IOSYS") //TODO: implement front-panel DIP-SW here
PORT_DIPNAME( 0x01, 0x01, "IOSYS" )
PORT_DIPSETTING( 0x01, DEF_STR( Off ) )
PORT_DIPSETTING( 0x00, DEF_STR( On ) )
PORT_DIPNAME( 0x02, 0x02, DEF_STR( Unknown ) )
PORT_DIPSETTING( 0x02, DEF_STR( Off ) )
PORT_DIPSETTING( 0x00, DEF_STR( On ) )
PORT_DIPNAME( 0x04, 0x04, DEF_STR( Unknown ) )
PORT_DIPSETTING( 0x04, DEF_STR( Off ) )
PORT_DIPSETTING( 0x00, DEF_STR( On ) )
PORT_DIPNAME( 0x08, 0x08, DEF_STR( Unknown ) )
PORT_DIPSETTING( 0x08, DEF_STR( Off ) )
PORT_DIPSETTING( 0x00, DEF_STR( On ) )
PORT_DIPNAME( 0x10, 0x10, DEF_STR( Unknown ) )
PORT_DIPSETTING( 0x10, DEF_STR( Off ) )
PORT_DIPSETTING( 0x00, DEF_STR( On ) )
PORT_DIPNAME( 0x20, 0x20, DEF_STR( Unknown ) )
PORT_DIPSETTING( 0x20, DEF_STR( Off ) )
PORT_DIPSETTING( 0x00, DEF_STR( On ) )
PORT_DIPNAME( 0x40, 0x40, DEF_STR( Unknown ) )
PORT_DIPSETTING( 0x40, DEF_STR( Off ) )
PORT_DIPSETTING( 0x00, DEF_STR( On ) )
PORT_DIPNAME( 0x80, 0x80, "Sound Setting?" )
PORT_DIPSETTING( 0x80, DEF_STR( Off ) )
PORT_DIPSETTING( 0x00, DEF_STR( On ) )
PORT_START("P1")
PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_JOYSTICK_UP ) PORT_8WAY
PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_JOYSTICK_DOWN ) PORT_8WAY
PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_JOYSTICK_LEFT ) PORT_8WAY
PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_JOYSTICK_RIGHT ) PORT_8WAY
PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_UNKNOWN )
PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_BUTTON1 )
PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_BUTTON2 )
PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_UNKNOWN )
PORT_START("P2")
PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_JOYSTICK_UP ) PORT_8WAY PORT_PLAYER(2)
PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_JOYSTICK_DOWN ) PORT_8WAY PORT_PLAYER(2)
PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_JOYSTICK_LEFT ) PORT_8WAY PORT_PLAYER(2)
PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_JOYSTICK_RIGHT ) PORT_8WAY PORT_PLAYER(2)
PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_UNKNOWN )
PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_BUTTON1 ) PORT_PLAYER(2)
PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_BUTTON2 ) PORT_PLAYER(2)
PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_UNKNOWN )
PORT_START("key1") //0x00-0x1f
PORT_BIT(0x00000001,IP_ACTIVE_HIGH,IPT_UNUSED) //0x00 null
PORT_BIT(0x00000002,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("0-2") /*PORT_CODE(KEYCODE_1) PORT_CHAR('1')*/
PORT_BIT(0x00000004,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("0-3") /*PORT_CODE(KEYCODE_2) PORT_CHAR('2')*/
PORT_BIT(0x00000008,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("0-4") /*PORT_CODE(KEYCODE_3) PORT_CHAR('3')*/
PORT_BIT(0x00000010,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("0-5") /*PORT_CODE(KEYCODE_4) PORT_CHAR('4')*/
PORT_BIT(0x00000020,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("0-6") /*PORT_CODE(KEYCODE_5) PORT_CHAR('5')*/
PORT_BIT(0x00000040,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("0-7") /*PORT_CODE(KEYCODE_6) PORT_CHAR('6')*/
PORT_BIT(0x00000080,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("0-8") /*PORT_CODE(KEYCODE_7) PORT_CHAR('7')*/
PORT_BIT(0x00000100,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("Backspace") PORT_CODE(KEYCODE_BACKSPACE) PORT_CHAR(8)
PORT_BIT(0x00000200,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("Tab") PORT_CODE(KEYCODE_TAB) PORT_CHAR(9)
PORT_BIT(0x00000400,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("1-3") /*PORT_CODE(KEYCODE_2) PORT_CHAR('2')*/
PORT_BIT(0x00000800,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("1-4") /*PORT_CODE(KEYCODE_3) PORT_CHAR('3')*/
PORT_BIT(0x00001000,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("1-5") /*PORT_CODE(KEYCODE_4) PORT_CHAR('4')*/
PORT_BIT(0x00002000,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("RETURN") PORT_CODE(KEYCODE_ENTER) PORT_CHAR(27)
PORT_BIT(0x00004000,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("1-7") /*PORT_CODE(KEYCODE_4) PORT_CHAR('4')*/
PORT_BIT(0x00008000,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("1-8") /*PORT_CODE(KEYCODE_4) PORT_CHAR('4')*/
PORT_BIT(0x00010000,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("2-1") /*PORT_CODE(KEYCODE_1) PORT_CHAR('1')*/
PORT_BIT(0x00020000,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("2-2") /*PORT_CODE(KEYCODE_1) PORT_CHAR('1')*/
PORT_BIT(0x00040000,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("2-3") /*PORT_CODE(KEYCODE_2) PORT_CHAR('2')*/
PORT_BIT(0x00080000,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("2-4") /*PORT_CODE(KEYCODE_3) PORT_CHAR('3')*/
PORT_BIT(0x00100000,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("2-5") /*PORT_CODE(KEYCODE_4) PORT_CHAR('4')*/
PORT_BIT(0x00200000,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("2-6") /*PORT_CODE(KEYCODE_5) PORT_CHAR('5')*/
PORT_BIT(0x00400000,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("2-7") /*PORT_CODE(KEYCODE_4) PORT_CHAR('4')*/
PORT_BIT(0x00800000,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("2-8") /*PORT_CODE(KEYCODE_5) PORT_CHAR('5')*/
PORT_BIT(0x01000000,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("3-1") /*PORT_CODE(KEYCODE_1) PORT_CHAR('1')*/
PORT_BIT(0x02000000,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("3-2") /*PORT_CODE(KEYCODE_1) PORT_CHAR('1')*/
PORT_BIT(0x04000000,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("3-3") /*PORT_CODE(KEYCODE_2) PORT_CHAR('2')*/
PORT_BIT(0x08000000,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("ESC") PORT_CODE(KEYCODE_ESC) PORT_CHAR(27)
PORT_BIT(0x10000000,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("Right") PORT_CODE(KEYCODE_RIGHT)
PORT_BIT(0x20000000,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("Left") PORT_CODE(KEYCODE_LEFT)
PORT_BIT(0x40000000,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("Up") PORT_CODE(KEYCODE_UP)
PORT_BIT(0x80000000,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("Down") PORT_CODE(KEYCODE_DOWN)
PORT_START("key2") //0x20-0x3f
PORT_BIT(0x00000001,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("Space") PORT_CODE(KEYCODE_SPACE) PORT_CHAR(' ')
PORT_BIT(0x00000002,IP_ACTIVE_HIGH,IPT_UNUSED) //0x21 !
PORT_BIT(0x00000004,IP_ACTIVE_HIGH,IPT_UNUSED) //0x22 "
PORT_BIT(0x00000008,IP_ACTIVE_HIGH,IPT_UNUSED) //0x23 #
PORT_BIT(0x00000010,IP_ACTIVE_HIGH,IPT_UNUSED) //0x24 $
PORT_BIT(0x00000020,IP_ACTIVE_HIGH,IPT_UNUSED) //0x25 %
PORT_BIT(0x00000040,IP_ACTIVE_HIGH,IPT_UNUSED) //0x26 &
PORT_BIT(0x00000080,IP_ACTIVE_HIGH,IPT_UNUSED) //0x27 '
PORT_BIT(0x00000100,IP_ACTIVE_HIGH,IPT_UNUSED) //0x28 (
PORT_BIT(0x00000200,IP_ACTIVE_HIGH,IPT_UNUSED) //0x29 )
PORT_BIT(0x00000400,IP_ACTIVE_HIGH,IPT_UNUSED) //0x2a *
PORT_BIT(0x00000800,IP_ACTIVE_HIGH,IPT_UNUSED) //0x2b +
PORT_BIT(0x00001000,IP_ACTIVE_HIGH,IPT_UNUSED) //0x2c ,
PORT_BIT(0x00002000,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("-") PORT_CODE(KEYCODE_MINUS) PORT_CHAR('-')
PORT_BIT(0x00004000,IP_ACTIVE_HIGH,IPT_UNUSED) //0x2e .
PORT_BIT(0x00008000,IP_ACTIVE_HIGH,IPT_UNUSED) //0x2f /
PORT_BIT(0x00010000,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("0") PORT_CODE(KEYCODE_0) PORT_CHAR('0')
PORT_BIT(0x00020000,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("1") PORT_CODE(KEYCODE_1) PORT_CHAR('1')
PORT_BIT(0x00040000,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("2") PORT_CODE(KEYCODE_2) PORT_CHAR('2')
PORT_BIT(0x00080000,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("3") PORT_CODE(KEYCODE_3) PORT_CHAR('3')
PORT_BIT(0x00100000,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("4") PORT_CODE(KEYCODE_4) PORT_CHAR('4')
PORT_BIT(0x00200000,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("5") PORT_CODE(KEYCODE_5) PORT_CHAR('5')
PORT_BIT(0x00400000,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("6") PORT_CODE(KEYCODE_6) PORT_CHAR('6')
PORT_BIT(0x00800000,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("7") PORT_CODE(KEYCODE_7) PORT_CHAR('7')
PORT_BIT(0x01000000,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("8") PORT_CODE(KEYCODE_8) PORT_CHAR('8')
PORT_BIT(0x02000000,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("9") PORT_CODE(KEYCODE_9) PORT_CHAR('9')
PORT_BIT(0x04000000,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME(":") PORT_CODE(KEYCODE_QUOTE) PORT_CHAR(':')
PORT_BIT(0x08000000,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME(";") PORT_CODE(KEYCODE_COLON) PORT_CHAR(';')
PORT_BIT(0x10000000,IP_ACTIVE_HIGH,IPT_UNUSED) //0x3c <
PORT_BIT(0x20000000,IP_ACTIVE_HIGH,IPT_UNUSED) //0x3d =
PORT_BIT(0x40000000,IP_ACTIVE_HIGH,IPT_UNUSED) //0x3e >
PORT_BIT(0x80000000,IP_ACTIVE_HIGH,IPT_UNUSED) //0x3f ?
PORT_START("key3") //0x40-0x5f
PORT_BIT(0x00000001,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("@") PORT_CODE(KEYCODE_OPENBRACE) PORT_CHAR('@')
PORT_BIT(0x00000002,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("A") PORT_CODE(KEYCODE_A) PORT_CHAR('A')
PORT_BIT(0x00000004,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("B") PORT_CODE(KEYCODE_B) PORT_CHAR('B')
PORT_BIT(0x00000008,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("C") PORT_CODE(KEYCODE_C) PORT_CHAR('C')
PORT_BIT(0x00000010,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("D") PORT_CODE(KEYCODE_D) PORT_CHAR('D')
PORT_BIT(0x00000020,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("E") PORT_CODE(KEYCODE_E) PORT_CHAR('E')
PORT_BIT(0x00000040,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("F") PORT_CODE(KEYCODE_F) PORT_CHAR('F')
PORT_BIT(0x00000080,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("G") PORT_CODE(KEYCODE_G) PORT_CHAR('G')
PORT_BIT(0x00000100,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("H") PORT_CODE(KEYCODE_H) PORT_CHAR('H')
PORT_BIT(0x00000200,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("I") PORT_CODE(KEYCODE_I) PORT_CHAR('I')
PORT_BIT(0x00000400,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("J") PORT_CODE(KEYCODE_J) PORT_CHAR('J')
PORT_BIT(0x00000800,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("K") PORT_CODE(KEYCODE_K) PORT_CHAR('K')
PORT_BIT(0x00001000,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("L") PORT_CODE(KEYCODE_L) PORT_CHAR('L')
PORT_BIT(0x00002000,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("M") PORT_CODE(KEYCODE_M) PORT_CHAR('M')
PORT_BIT(0x00004000,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("N") PORT_CODE(KEYCODE_N) PORT_CHAR('N')
PORT_BIT(0x00008000,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("O") PORT_CODE(KEYCODE_O) PORT_CHAR('O')
PORT_BIT(0x00010000,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("P") PORT_CODE(KEYCODE_P) PORT_CHAR('P')
PORT_BIT(0x00020000,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("Q") PORT_CODE(KEYCODE_Q) PORT_CHAR('Q')
PORT_BIT(0x00040000,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("R") PORT_CODE(KEYCODE_R) PORT_CHAR('R')
PORT_BIT(0x00080000,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("S") PORT_CODE(KEYCODE_S) PORT_CHAR('S')
PORT_BIT(0x00100000,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("T") PORT_CODE(KEYCODE_T) PORT_CHAR('T')
PORT_BIT(0x00200000,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("U") PORT_CODE(KEYCODE_U) PORT_CHAR('U')
PORT_BIT(0x00400000,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("V") PORT_CODE(KEYCODE_V) PORT_CHAR('V')
PORT_BIT(0x00800000,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("W") PORT_CODE(KEYCODE_W) PORT_CHAR('W')
PORT_BIT(0x01000000,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("X") PORT_CODE(KEYCODE_X) PORT_CHAR('X')
PORT_BIT(0x02000000,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("Y") PORT_CODE(KEYCODE_Y) PORT_CHAR('Y')
PORT_BIT(0x04000000,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("Z") PORT_CODE(KEYCODE_Z) PORT_CHAR('Z')
PORT_BIT(0x08000000,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("[") PORT_CODE(KEYCODE_CLOSEBRACE) PORT_CHAR('[')
PORT_BIT(0x10000000,IP_ACTIVE_HIGH,IPT_UNUSED)
PORT_BIT(0x20000000,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("]") PORT_CODE(KEYCODE_BACKSLASH) PORT_CHAR(']')
PORT_BIT(0x40000000,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("^") PORT_CODE(KEYCODE_EQUALS) PORT_CHAR('^')
PORT_BIT(0x80000000,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("_")
PORT_START("f_keys")
PORT_BIT(0x00000001,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("F1") PORT_CODE(KEYCODE_F1)
PORT_BIT(0x00000002,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("F2") PORT_CODE(KEYCODE_F2)
PORT_BIT(0x00000004,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("F3") PORT_CODE(KEYCODE_F3)
PORT_BIT(0x00000008,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("F4") PORT_CODE(KEYCODE_F4)
PORT_BIT(0x00000010,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("F5") PORT_CODE(KEYCODE_F5)
PORT_START("tenkey")
PORT_BIT(0x00000001,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("Tenkey 0") PORT_CODE(KEYCODE_0_PAD)
PORT_BIT(0x00000002,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("Tenkey 1") PORT_CODE(KEYCODE_1_PAD)
PORT_BIT(0x00000004,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("Tenkey 2") PORT_CODE(KEYCODE_2_PAD)
PORT_BIT(0x00000008,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("Tenkey 3") PORT_CODE(KEYCODE_3_PAD)
PORT_BIT(0x00000010,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("Tenkey 4") PORT_CODE(KEYCODE_4_PAD)
PORT_BIT(0x00000020,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("Tenkey 5") PORT_CODE(KEYCODE_5_PAD)
PORT_BIT(0x00000040,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("Tenkey 6") PORT_CODE(KEYCODE_6_PAD)
PORT_BIT(0x00000080,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("Tenkey 7") PORT_CODE(KEYCODE_7_PAD)
PORT_BIT(0x00000100,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("Tenkey 8") PORT_CODE(KEYCODE_8_PAD)
PORT_BIT(0x00000200,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("Tenkey 9") PORT_CODE(KEYCODE_9_PAD)
PORT_BIT(0x00000400,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("Tenkey -") PORT_CODE(KEYCODE_MINUS_PAD)
PORT_BIT(0x00000800,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("Tenkey +") PORT_CODE(KEYCODE_PLUS_PAD)
PORT_BIT(0x00001000,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("Tenkey *") PORT_CODE(KEYCODE_ASTERISK)
// TODO: add other numpad keys
PORT_START("key_modifiers")
PORT_BIT(0x00000001,IP_ACTIVE_LOW,IPT_KEYBOARD) PORT_NAME("CTRL") PORT_CODE(KEYCODE_LCONTROL)
PORT_BIT(0x00000002,IP_ACTIVE_LOW,IPT_KEYBOARD) PORT_NAME("SHIFT") PORT_CODE(KEYCODE_LSHIFT)
PORT_BIT(0x00000004,IP_ACTIVE_LOW,IPT_KEYBOARD) PORT_NAME("KANA") PORT_CODE(KEYCODE_RCONTROL)
PORT_BIT(0x00000008,IP_ACTIVE_LOW,IPT_KEYBOARD) PORT_NAME("CAPS") PORT_CODE(KEYCODE_CAPSLOCK) PORT_TOGGLE
PORT_BIT(0x00000010,IP_ACTIVE_LOW,IPT_KEYBOARD) PORT_NAME("GRPH") PORT_CODE(KEYCODE_LALT)
#if 0
PORT_BIT(0x00020000,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME(",") PORT_CODE(KEYCODE_COMMA) PORT_CHAR(',')
PORT_BIT(0x00040000,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME(".") PORT_CODE(KEYCODE_STOP) PORT_CHAR('.')
PORT_BIT(0x00080000,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("/") PORT_CODE(KEYCODE_SLASH) PORT_CHAR('/')
PORT_BIT(0x00400000,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("Tenkey *") PORT_CODE(KEYCODE_ASTERISK)
PORT_BIT(0x00800000,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("Tenkey /") PORT_CODE(KEYCODE_SLASH_PAD)
PORT_BIT(0x01000000,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("Tenkey +") PORT_CODE(KEYCODE_PLUS_PAD)
PORT_BIT(0x02000000,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("Tenkey -") PORT_CODE(KEYCODE_MINUS_PAD)
PORT_BIT(0x04000000,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("Tenkey 7") PORT_CODE(KEYCODE_7_PAD)
PORT_BIT(0x08000000,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("Tenkey 8") PORT_CODE(KEYCODE_8_PAD)
PORT_BIT(0x10000000,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("Tenkey 9") PORT_CODE(KEYCODE_9_PAD)
PORT_BIT(0x20000000,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("Tenkey =")
PORT_BIT(0x40000000,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("Tenkey 4") PORT_CODE(KEYCODE_4_PAD)
PORT_BIT(0x80000000,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("Tenkey 5") PORT_CODE(KEYCODE_5_PAD)
PORT_BIT(0x10000000,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("\xEF\xBF\xA5")
PORT_START("key3")
PORT_BIT(0x00000001,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("Tenkey 6") PORT_CODE(KEYCODE_6_PAD)
PORT_BIT(0x00000002,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("Tenkey ,")
PORT_BIT(0x00000004,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("Tenkey 1") PORT_CODE(KEYCODE_1_PAD)
PORT_BIT(0x00000008,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("Tenkey 2") PORT_CODE(KEYCODE_2_PAD)
PORT_BIT(0x00000010,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("Tenkey 3") PORT_CODE(KEYCODE_3_PAD)
PORT_BIT(0x00000020,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("Tenkey Enter") PORT_CODE(KEYCODE_ENTER_PAD)
PORT_BIT(0x00000040,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("Tenkey 0") PORT_CODE(KEYCODE_0_PAD)
PORT_BIT(0x00000080,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("Tenkey .") PORT_CODE(KEYCODE_DEL_PAD)
PORT_BIT(0x00000100,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("INS") PORT_CODE(KEYCODE_INSERT)
PORT_BIT(0x00000200,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("EL") PORT_CODE(KEYCODE_PGUP)
PORT_BIT(0x00000400,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("CLS") PORT_CODE(KEYCODE_PGDN)
PORT_BIT(0x00000800,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("DEL") PORT_CODE(KEYCODE_DEL)
PORT_BIT(0x00001000,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("DUP") PORT_CODE(KEYCODE_END)
PORT_BIT(0x00002000,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("Up") PORT_CODE(KEYCODE_UP)
PORT_BIT(0x00004000,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("HOME") PORT_CODE(KEYCODE_HOME)
PORT_BIT(0x00008000,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("Left") PORT_CODE(KEYCODE_LEFT)
PORT_BIT(0x00010000,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("Down") PORT_CODE(KEYCODE_DOWN)
PORT_BIT(0x00020000,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("Right") PORT_CODE(KEYCODE_RIGHT)
PORT_BIT(0x00040000,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("BREAK") PORT_CODE(KEYCODE_ESC)
PORT_BIT(0x01000000,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("PF6") PORT_CODE(KEYCODE_F6)
PORT_BIT(0x02000000,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("PF7") PORT_CODE(KEYCODE_F7)
PORT_BIT(0x04000000,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("PF8") PORT_CODE(KEYCODE_F8)
PORT_BIT(0x08000000,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("PF9") PORT_CODE(KEYCODE_F9)
PORT_BIT(0x10000000,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("PF10") PORT_CODE(KEYCODE_F10)
#endif
INPUT_PORTS_END
INPUT_PORTS_START( x1turbo )
PORT_INCLUDE( x1 )
PORT_START("X1TURBO_DSW")
PORT_DIPNAME( 0x01, 0x01, "Interlace mode" )
PORT_DIPSETTING( 0x01, DEF_STR( Off ) )
PORT_DIPSETTING( 0x00, DEF_STR( On ) )
PORT_DIPNAME( 0x0e, 0x00, "Default Auto-boot Device" ) // this selects what kind of device is loaded at start-up
PORT_DIPSETTING( 0x00, "5/3-inch 2D" )
PORT_DIPSETTING( 0x02, "5/3-inch 2DD" )
PORT_DIPSETTING( 0x04, "5/3-inch 2HD" )
PORT_DIPSETTING( 0x06, "5/3-inch 2DD (IBM)" )
PORT_DIPSETTING( 0x08, "8-inch 2D256" )
PORT_DIPSETTING( 0x0a, "8-inch 2D256 (IBM)" )
PORT_DIPSETTING( 0x0c, "8-inch 1S128 (IBM)" )
PORT_DIPSETTING( 0x0e, "SASI HDD" )
PORT_DIPNAME( 0x10, 0x10, DEF_STR( Unknown ) )
PORT_DIPSETTING( 0x10, DEF_STR( Off ) )
PORT_DIPSETTING( 0x00, DEF_STR( On ) )
PORT_DIPNAME( 0x20, 0x20, DEF_STR( Unknown ) ) //this is a port conditional of some sort ...
PORT_DIPSETTING( 0x20, DEF_STR( Off ) )
PORT_DIPSETTING( 0x00, DEF_STR( On ) )
PORT_DIPNAME( 0x40, 0x40, DEF_STR( Unknown ) )
PORT_DIPSETTING( 0x40, DEF_STR( Off ) )
PORT_DIPSETTING( 0x00, DEF_STR( On ) )
PORT_DIPNAME( 0x80, 0x80, DEF_STR( Unknown ) )
PORT_DIPSETTING( 0x80, DEF_STR( Off ) )
PORT_DIPSETTING( 0x00, DEF_STR( On ) )
INPUT_PORTS_END
/*************************************
*
* GFX decoding
*
*************************************/
static const gfx_layout x1_chars_8x8 =
{
8,8,
RGN_FRAC(1,1),
1,
{ 0 },
{ 0, 1, 2, 3, 4, 5, 6, 7 },
{ 0*8, 1*8, 2*8, 3*8, 4*8, 5*8, 6*8, 7*8 },
8*8
};
static const gfx_layout x1_chars_8x16 =
{
8,16,
RGN_FRAC(1,1),
1,
{ 0 },
{ 0, 1, 2, 3, 4, 5, 6, 7 },
{ 0*8, 1*8, 2*8, 3*8, 4*8, 5*8, 6*8, 7*8,8*8,9*8,10*8,11*8,12*8,13*8,14*8,15*8 },
8*16
};
static const gfx_layout x1_chars_16x16 =
{
8,16,
RGN_FRAC(1,1),
1,
{ 0 },
{ 0, 1, 2, 3, 4, 5, 6, 7 },
{ 0*8, 1*8, 2*8, 3*8, 4*8, 5*8, 6*8, 7*8,8*8, 9*8, 10*8, 11*8, 12*8, 13*8, 14*8, 15*8 },
8*16
};
/* decoded for debugging purpose, this will be nuked in the end... */
static GFXDECODE_START( x1 )
GFXDECODE_ENTRY( "cgrom", 0x00000, x1_chars_8x8, 0, 1 )
GFXDECODE_ENTRY( "font", 0x00000, x1_chars_8x16, 0, 1 )
GFXDECODE_ENTRY( "kanji", 0x00000, x1_chars_16x16, 0, 1 )
// GFXDECODE_ENTRY( "pcg", 0x00000, x1_pcg_8x8, 0, 1 )
GFXDECODE_END
static const z80_daisy_config x1_daisy[] =
{
{ "x1kb" },
{ "ctc" },
{ NULL }
};
static const z80_daisy_config x1turbo_daisy[] =
{
{ "x1kb" },
{ "ctc" },
{ "dma" },
{ "sio" },
{ NULL }
};
/*************************************
*
* Machine Functions
*
*************************************/
#ifdef UNUSED_FUNCTION
IRQ_CALLBACK_MEMBER(x1_state::x1_irq_callback)
{
if(m_ctc_irq_flag != 0)
{
m_ctc_irq_flag = 0;
if(m_key_irq_flag == 0) // if no other devices are pulling the IRQ line high
device.execute().set_input_line(0, CLEAR_LINE);
return m_irq_vector;
}
if(m_key_irq_flag != 0)
{
m_key_irq_flag = 0;
if(m_ctc_irq_flag == 0) // if no other devices are pulling the IRQ line high
device.execute().set_input_line(0, CLEAR_LINE);
return m_key_irq_vector;
}
return m_irq_vector;
}
#endif
TIMER_DEVICE_CALLBACK_MEMBER(x1_state::x1_keyboard_callback)
{
address_space &space = m_maincpu->space(AS_PROGRAM);
UINT32 key1 = ioport("key1")->read();
UINT32 key2 = ioport("key2")->read();
UINT32 key3 = ioport("key3")->read();
UINT32 key4 = ioport("tenkey")->read();
UINT32 f_key = ioport("f_keys")->read();
if(m_key_irq_vector)
{
//if(key1 == 0 && key2 == 0 && key3 == 0 && key4 == 0 && f_key == 0)
// return;
if((key1 != m_old_key1) || (key2 != m_old_key2) || (key3 != m_old_key3) || (key4 != m_old_key4) || (f_key != m_old_fkey))
{
// generate keyboard IRQ
x1_sub_io_w(space,0,0xe6);
m_irq_vector = m_key_irq_vector;
m_key_irq_flag = 1;
m_maincpu->set_input_line(0,ASSERT_LINE);
m_old_key1 = key1;
m_old_key2 = key2;
m_old_key3 = key3;
m_old_key4 = key4;
m_old_fkey = f_key;
}
}
}
TIMER_CALLBACK_MEMBER(x1_state::x1_rtc_increment)
{
static const UINT8 dpm[12] = { 0x31, 0x28, 0x31, 0x30, 0x31, 0x30, 0x31, 0x31, 0x30, 0x31, 0x30, 0x31 };
m_rtc.sec++;
if((m_rtc.sec & 0x0f) >= 0x0a) { m_rtc.sec+=0x10; m_rtc.sec&=0xf0; }
if((m_rtc.sec & 0xf0) >= 0x60) { m_rtc.min++; m_rtc.sec = 0; }
if((m_rtc.min & 0x0f) >= 0x0a) { m_rtc.min+=0x10; m_rtc.min&=0xf0; }
if((m_rtc.min & 0xf0) >= 0x60) { m_rtc.hour++; m_rtc.min = 0; }
if((m_rtc.hour & 0x0f) >= 0x0a) { m_rtc.hour+=0x10; m_rtc.hour&=0xf0; }
if((m_rtc.hour & 0xff) >= 0x24) { m_rtc.day++; m_rtc.wday++; m_rtc.hour = 0; }
if((m_rtc.wday & 0x0f) >= 0x07) { m_rtc.wday = 0; }
if((m_rtc.day & 0x0f) >= 0x0a) { m_rtc.day+=0x10; m_rtc.day&=0xf0; }
/* FIXME: very crude leap year support (i.e. it treats the RTC to be with a 2000-2099 timeline), dunno how the real x1 supports this,
maybe it just have a 1980-1999 timeline since year 0x00 shows as a XX on display */
if(((m_rtc.year % 4) == 0) && m_rtc.month == 2)
{
if((m_rtc.day & 0xff) >= dpm[m_rtc.month-1]+1+1)
{ m_rtc.month++; m_rtc.day = 0x01; }
}
else if((m_rtc.day & 0xff) >= dpm[m_rtc.month-1]+1){ m_rtc.month++; m_rtc.day = 0x01; }
if(m_rtc.month > 12) { m_rtc.year++; m_rtc.month = 0x01; }
if((m_rtc.year & 0x0f) >= 0x0a) { m_rtc.year+=0x10; m_rtc.year&=0xf0; }
if((m_rtc.year & 0xf0) >= 0xa0) { m_rtc.year = 0; } //roll over
}
MACHINE_RESET_MEMBER(x1_state,x1)
{
//UINT8 *ROM = memregion("x1_cpu")->base();
int i;
memset(m_gfx_bitmap_ram,0x00,0xc000*2);
for(i=0;i<0x1800;i++)
{
m_pcg_ram[i] = 0;
m_gfxdecode->gfx(3)->mark_dirty(i >> 3);
}
m_is_turbo = 0;
m_io_bank_mode = 0;
//m_x1_cpu->set_irq_acknowledge_callback(device_irq_acknowledge_delegate(FUNC(x1_state::x1_irq_callback),this));
m_cmt_current_cmd = 0;
m_cmt_test = 0;
m_cassette->change_state(CASSETTE_MOTOR_DISABLED,CASSETTE_MASK_MOTOR);
m_key_irq_flag = m_ctc_irq_flag = 0;
m_sub_cmd = 0;
m_key_irq_vector = 0;
m_sub_cmd_length = 0;
m_sub_val[0] = 0;
m_sub_val[1] = 0;
m_sub_val[2] = 0;
m_sub_val[3] = 0;
m_sub_val[4] = 0;
m_sub_obf = (m_sub_cmd_length) ? 0x00 : 0x20;
m_rtc_timer->adjust(attotime::zero, 0, attotime::from_seconds(1));
/* Reinitialize palette here if there's a soft reset for the Turbo PAL stuff*/
for(i=0;i<0x10;i++)
m_palette->set_pen_color(i, pal1bit(i >> 1), pal1bit(i >> 2), pal1bit(i >> 0));
m_ram_bank = 0;
// m_old_vpos = -1;
}
MACHINE_RESET_MEMBER(x1_state,x1turbo)
{
MACHINE_RESET_CALL_MEMBER( x1 );
m_is_turbo = 1;
m_ex_bank = 0x10;
m_scrn_reg.blackclip = 0;
}
static const gfx_layout x1_pcg_8x8 =
{
8,8,
0x100,
3,
{ 0x1000*8,0x800*8, 0 },
{ 0, 1, 2, 3, 4, 5, 6, 7 },
{ 0*8, 1*8, 2*8, 3*8, 4*8, 5*8, 6*8, 7*8 },
8*8
};
MACHINE_START_MEMBER(x1_state,x1)
{
/* set up RTC */
{
system_time systime;
machine().base_datetime(systime);
m_rtc.day = ((systime.local_time.mday / 10)<<4) | ((systime.local_time.mday % 10) & 0xf);
m_rtc.month = ((systime.local_time.month+1));
m_rtc.wday = ((systime.local_time.weekday % 10) & 0xf);
m_rtc.year = (((systime.local_time.year % 100)/10)<<4) | ((systime.local_time.year % 10) & 0xf);
m_rtc.hour = ((systime.local_time.hour / 10)<<4) | ((systime.local_time.hour % 10) & 0xf);
m_rtc.min = ((systime.local_time.minute / 10)<<4) | ((systime.local_time.minute % 10) & 0xf);
m_rtc.sec = ((systime.local_time.second / 10)<<4) | ((systime.local_time.second % 10) & 0xf);
m_rtc_timer = machine().scheduler().timer_alloc(timer_expired_delegate(FUNC(x1_state::x1_rtc_increment),this));
}
m_ipl_rom = memregion("ipl")->base();
m_work_ram = auto_alloc_array_clear(machine(), UINT8, 0x10000*0x10);
m_emm_ram = auto_alloc_array_clear(machine(), UINT8, 0x1000000);
m_pcg_ram = auto_alloc_array_clear(machine(), UINT8, 0x1800);
m_cg_rom = memregion("cgrom")->base();
m_kanji_rom = memregion("kanji")->base();
save_pointer(NAME(m_work_ram), 0x10000*0x10);
save_pointer(NAME(m_emm_ram), 0x1000000);
save_pointer(NAME(m_pcg_ram), 0x1800);
m_gfxdecode->set_gfx(3, global_alloc(gfx_element(m_palette, x1_pcg_8x8, (UINT8 *)m_pcg_ram, 0, 1, 0)));
}
PALETTE_INIT_MEMBER(x1_state,x1)
{
int i;
for(i=0;i<(0x10+0x1000);i++)
palette.set_pen_color(i,rgb_t(0x00,0x00,0x00));
}
static LEGACY_FLOPPY_OPTIONS_START( x1 )
LEGACY_FLOPPY_OPTION( img2d, "2d", "2D disk image", basicdsk_identify_default, basicdsk_construct_default, NULL,
HEADS([2])
TRACKS([40])
SECTORS([16])
SECTOR_LENGTH([256])
FIRST_SECTOR_ID([1]))
LEGACY_FLOPPY_OPTIONS_END
static const floppy_interface x1_floppy_interface =
{
FLOPPY_STANDARD_5_25_DSDD_40,
LEGACY_FLOPPY_OPTIONS_NAME(x1),
"floppy_5_25"
};
static MACHINE_CONFIG_START( x1, x1_state )
/* basic machine hardware */
MCFG_CPU_ADD("x1_cpu", Z80, MAIN_CLOCK/4)
MCFG_CPU_PROGRAM_MAP(x1_mem)
MCFG_CPU_IO_MAP(x1_io)
MCFG_CPU_CONFIG(x1_daisy)
MCFG_DEVICE_ADD("ctc", Z80CTC, MAIN_CLOCK/4)
MCFG_Z80CTC_INTR_CB(INPUTLINE("x1_cpu", INPUT_LINE_IRQ0))
MCFG_Z80CTC_ZC0_CB(DEVWRITELINE("ctc", z80ctc_device, trg3))
MCFG_Z80CTC_ZC1_CB(DEVWRITELINE("ctc", z80ctc_device, trg1))
MCFG_Z80CTC_ZC2_CB(DEVWRITELINE("ctc", z80ctc_device, trg2))
MCFG_DEVICE_ADD("x1kb", X1_KEYBOARD, 0)
MCFG_DEVICE_ADD("ppi8255_0", I8255A, 0)
MCFG_I8255_IN_PORTA_CB(READ8(x1_state, x1_porta_r))
MCFG_I8255_OUT_PORTA_CB(WRITE8(x1_state, x1_porta_w))
MCFG_I8255_IN_PORTB_CB(READ8(x1_state, x1_portb_r))
MCFG_I8255_OUT_PORTB_CB(WRITE8(x1_state, x1_portb_w))
MCFG_I8255_IN_PORTC_CB(READ8(x1_state, x1_portc_r))
MCFG_I8255_OUT_PORTC_CB(WRITE8(x1_state, x1_portc_w))
MCFG_MACHINE_START_OVERRIDE(x1_state,x1)
MCFG_MACHINE_RESET_OVERRIDE(x1_state,x1)
/* video hardware */
MCFG_SCREEN_ADD("screen", RASTER)
MCFG_SCREEN_REFRESH_RATE(60)
MCFG_SCREEN_VBLANK_TIME(ATTOSECONDS_IN_USEC(2500)) /* not accurate */
MCFG_SCREEN_SIZE(640, 480)
MCFG_SCREEN_VISIBLE_AREA(0, 640-1, 0, 480-1)
MCFG_SCREEN_UPDATE_DRIVER(x1_state, screen_update_x1)
MCFG_MC6845_ADD("crtc", H46505, "screen", (VDP_CLOCK/48)) //unknown divider
MCFG_MC6845_SHOW_BORDER_AREA(true)
MCFG_MC6845_CHAR_WIDTH(8)
MCFG_PALETTE_ADD("palette", 0x10+0x1000)
MCFG_PALETTE_INIT_OWNER(x1_state,x1)
MCFG_GFXDECODE_ADD("gfxdecode", "palette", x1)
MCFG_VIDEO_START_OVERRIDE(x1_state,x1)
MCFG_DEVICE_ADD("fdc", MB8877, 0)
MCFG_WD17XX_DEFAULT_DRIVE4_TAGS
MCFG_CARTSLOT_ADD("cart")
MCFG_CARTSLOT_EXTENSION_LIST("rom")
MCFG_CARTSLOT_NOT_MANDATORY
MCFG_SPEAKER_STANDARD_STEREO("lspeaker", "rspeaker")
/* TODO:is the AY mono or stereo? Also volume balance isn't right. */
MCFG_SOUND_ADD("ay", AY8910, MAIN_CLOCK/8)
MCFG_AY8910_PORT_A_READ_CB(IOPORT("P1"))
MCFG_AY8910_PORT_B_READ_CB(IOPORT("P2"))
MCFG_SOUND_ROUTE(0, "lspeaker", 0.25)
MCFG_SOUND_ROUTE(0, "rspeaker", 0.25)
MCFG_SOUND_ROUTE(1, "lspeaker", 0.5)
MCFG_SOUND_ROUTE(2, "rspeaker", 0.5)
MCFG_SOUND_WAVE_ADD(WAVE_TAG, "cassette")
MCFG_SOUND_ROUTE(ALL_OUTPUTS, "lspeaker", 0.25)
MCFG_SOUND_ROUTE(ALL_OUTPUTS, "rspeaker", 0.10)
MCFG_CASSETTE_ADD("cassette")
MCFG_CASSETTE_FORMATS(x1_cassette_formats)
MCFG_CASSETTE_DEFAULT_STATE(CASSETTE_STOPPED | CASSETTE_MOTOR_DISABLED | CASSETTE_SPEAKER_ENABLED)
MCFG_CASSETTE_INTERFACE("x1_cass")
MCFG_SOFTWARE_LIST_ADD("cass_list","x1_cass")
MCFG_LEGACY_FLOPPY_4_DRIVES_ADD(x1_floppy_interface)
MCFG_SOFTWARE_LIST_ADD("flop_list","x1_flop")
MCFG_TIMER_DRIVER_ADD_PERIODIC("keyboard_timer", x1_state, x1_keyboard_callback, attotime::from_hz(250))
MCFG_TIMER_DRIVER_ADD_PERIODIC("cmt_wind_timer", x1_state, x1_cmt_wind_timer, attotime::from_hz(16))
MACHINE_CONFIG_END
static MACHINE_CONFIG_DERIVED( x1turbo, x1 )
MCFG_CPU_MODIFY("x1_cpu")
MCFG_CPU_PROGRAM_MAP(x1turbo_mem)
MCFG_CPU_IO_MAP(x1turbo_io)
MCFG_CPU_CONFIG(x1turbo_daisy)
MCFG_MACHINE_RESET_OVERRIDE(x1_state,x1turbo)
MCFG_Z80SIO0_ADD("sio", MAIN_CLOCK/4 , 0, 0, 0, 0)
MCFG_Z80DART_OUT_INT_CB(INPUTLINE("x1_cpu", INPUT_LINE_IRQ0))
MCFG_DEVICE_ADD("dma", Z80DMA, MAIN_CLOCK/4)
MCFG_Z80DMA_OUT_BUSREQ_CB(INPUTLINE("x1_cpu", INPUT_LINE_HALT))
MCFG_Z80DMA_OUT_INT_CB(INPUTLINE("x1_cpu", INPUT_LINE_IRQ0))
MCFG_Z80DMA_IN_MREQ_CB(READ8(x1_state, memory_read_byte))
MCFG_Z80DMA_OUT_MREQ_CB(WRITE8(x1_state, memory_write_byte))
MCFG_Z80DMA_IN_IORQ_CB(READ8(x1_state, io_read_byte))
MCFG_Z80DMA_OUT_IORQ_CB(WRITE8(x1_state, io_write_byte))
MCFG_DEVICE_REMOVE("fdc")
MCFG_DEVICE_ADD("fdc", MB8877, 0)
MCFG_WD17XX_DEFAULT_DRIVE4_TAGS
MCFG_WD17XX_DRQ_CALLBACK(WRITELINE(x1_state,fdc_drq_w))
MCFG_YM2151_ADD("ym", MAIN_CLOCK/8) //option board
MCFG_SOUND_ROUTE(0, "lspeaker", 0.50)
MCFG_SOUND_ROUTE(1, "rspeaker", 0.50)
MACHINE_CONFIG_END
/*************************************
*
* ROM definitions
*
*************************************/
ROM_START( x1 )
ROM_REGION( 0x8000, "ipl", ROMREGION_ERASEFF )
ROM_LOAD( "ipl.x1", 0x0000, 0x1000, CRC(7b28d9de) SHA1(c4db9a6e99873808c8022afd1c50fef556a8b44d) )
ROM_REGION(0x1000, "mcu", ROMREGION_ERASEFF) //MCU for the Keyboard, "sub cpu"
ROM_LOAD( "80c48", 0x0000, 0x1000, NO_DUMP )
ROM_REGION(0x2000, "font", 0) //TODO: this contains 8x16 charset only, maybe it's possible that it derivates a 8x8 charset by skipping gfx lines?
ROM_LOAD( "ank.fnt", 0x0000, 0x2000, BAD_DUMP CRC(19689fbd) SHA1(0d4e072cd6195a24a1a9b68f1d37500caa60e599) )
ROM_REGION(0x1800, "cgrom", 0)
ROM_LOAD("fnt0808.x1", 0x00000, 0x00800, CRC(e3995a57) SHA1(1c1a0d8c9f4c446ccd7470516b215ddca5052fb2) )
ROM_COPY("font", 0x1000, 0x00800, 0x1000 )
ROM_REGION(0x20000, "kanji", ROMREGION_ERASEFF)
ROM_REGION(0x20000, "raw_kanji", ROMREGION_ERASEFF)
ROM_REGION( 0x1000000, "cart_img", ROMREGION_ERASE00 )
ROM_CART_LOAD("cart", 0x0000, 0xffffff, ROM_OPTIONAL | ROM_NOMIRROR)
ROM_END
ROM_START( x1turbo )
ROM_REGION( 0x8000, "ipl", ROMREGION_ERASEFF )
ROM_LOAD( "ipl.x1t", 0x0000, 0x8000, CRC(2e8b767c) SHA1(44620f57a25f0bcac2b57ca2b0f1ebad3bf305d3) )
ROM_REGION(0x1000, "mcu", ROMREGION_ERASEFF) //MCU for the Keyboard, "sub cpu"
ROM_LOAD( "80c48", 0x0000, 0x1000, NO_DUMP )
ROM_REGION(0x2000, "font", 0) //TODO: this contains 8x16 charset only, maybe it's possible that it derivates a 8x8 charset by skipping gfx lines?
ROM_LOAD( "ank.fnt", 0x0000, 0x2000, CRC(19689fbd) SHA1(0d4e072cd6195a24a1a9b68f1d37500caa60e599) )
ROM_REGION(0x4800, "cgrom", 0)
ROM_LOAD("fnt0808_turbo.x1", 0x00000, 0x00800, CRC(84a47530) SHA1(06c0995adc7a6609d4272417fe3570ca43bd0454) )
ROM_COPY("font", 0x01000, 0x00800, 0x1000 )
ROM_REGION(0x20000, "kanji", ROMREGION_ERASEFF)
ROM_REGION(0x20000, "raw_kanji", ROMREGION_ERASEFF)
ROM_LOAD("kanji4.rom", 0x00000, 0x8000, CRC(3e39de89) SHA1(d3fd24892bb1948c4697dedf5ff065ff3eaf7562) )
ROM_LOAD("kanji2.rom", 0x08000, 0x8000, CRC(e710628a) SHA1(103bbe459dc8da27a9400aa45b385255c18fcc75) )
ROM_LOAD("kanji3.rom", 0x10000, 0x8000, CRC(8cae13ae) SHA1(273f3329c70b332f6a49a3a95e906bbfe3e9f0a1) )
ROM_LOAD("kanji1.rom", 0x18000, 0x8000, CRC(5874f70b) SHA1(dad7ada1b70c45f1e9db11db273ef7b385ef4f17) )
ROM_REGION( 0x1000000, "cart_img", ROMREGION_ERASE00 )
ROM_CART_LOAD("cart", 0x0000, 0xffffff, ROM_OPTIONAL | ROM_NOMIRROR)
ROM_END
ROM_START( x1turbo40 )
ROM_REGION( 0x8000, "ipl", ROMREGION_ERASEFF )
ROM_LOAD( "ipl.bin", 0x0000, 0x8000, CRC(112f80a2) SHA1(646cc3fb5d2d24ff4caa5167b0892a4196e9f843) )
ROM_REGION(0x1000, "mcu", ROMREGION_ERASEFF) //MCU for the Keyboard, "sub cpu"
ROM_LOAD( "80c48", 0x0000, 0x1000, NO_DUMP )
ROM_REGION(0x2000, "font", 0) //TODO: this contains 8x16 charset only, maybe it's possible that it derivates a 8x8 charset by skipping gfx lines?
ROM_LOAD( "ank.fnt", 0x0000, 0x2000, CRC(19689fbd) SHA1(0d4e072cd6195a24a1a9b68f1d37500caa60e599) )
ROM_REGION(0x4800, "cgrom", 0)
ROM_LOAD("fnt0808_turbo.x1",0x00000, 0x0800, CRC(84a47530) SHA1(06c0995adc7a6609d4272417fe3570ca43bd0454) )
ROM_COPY("font", 0x01000, 0x0800, 0x1000 )
ROM_REGION(0x20000, "kanji", ROMREGION_ERASEFF)
ROM_REGION(0x20000, "raw_kanji", ROMREGION_ERASEFF)
ROM_LOAD("kanji4.rom", 0x00000, 0x8000, CRC(3e39de89) SHA1(d3fd24892bb1948c4697dedf5ff065ff3eaf7562) )
ROM_LOAD("kanji2.rom", 0x08000, 0x8000, CRC(e710628a) SHA1(103bbe459dc8da27a9400aa45b385255c18fcc75) )
ROM_LOAD("kanji3.rom", 0x10000, 0x8000, CRC(8cae13ae) SHA1(273f3329c70b332f6a49a3a95e906bbfe3e9f0a1) )
ROM_LOAD("kanji1.rom", 0x18000, 0x8000, CRC(5874f70b) SHA1(dad7ada1b70c45f1e9db11db273ef7b385ef4f17) )
ROM_REGION( 0x1000000, "cart_img", ROMREGION_ERASE00 )
ROM_CART_LOAD("cart", 0x0000, 0xffffff, ROM_OPTIONAL | ROM_NOMIRROR)
ROM_END
/* Convert the ROM interleaving into something usable by the write handlers */
DRIVER_INIT_MEMBER(x1_state,x1_kanji)
{
UINT32 i,j,k,l;
UINT8 *kanji = memregion("kanji")->base();
UINT8 *raw_kanji = memregion("raw_kanji")->base();
k = 0;
for(l=0;l<2;l++)
{
for(j=l*16;j<(l*16)+0x10000;j+=32)
{
for(i=0;i<16;i++)
{
kanji[j+i] = raw_kanji[k];
kanji[j+i+0x10000] = raw_kanji[0x10000+k];
k++;
}
}
}
}
/* YEAR NAME PARENT COMPAT MACHINE INPUT INIT COMPANY FULLNAME FLAGS */
COMP( 1982, x1, 0, 0, x1, x1, driver_device, 0, "Sharp", "X1 (CZ-800C)", 0 )
// x1twin in x1twin.c
COMP( 1984, x1turbo, x1, 0, x1turbo, x1turbo, x1_state, x1_kanji, "Sharp", "X1 Turbo (CZ-850C)", GAME_NOT_WORKING ) //model 10
COMP( 1985, x1turbo40, x1, 0, x1turbo, x1turbo, x1_state, x1_kanji, "Sharp", "X1 Turbo (CZ-862C)", 0 ) //model 40
// x1turboz /* 1986 Sharp X1 TurboZ */