/***************************************************************************
The CPS1 system is made of 3 boards: A, B and C. The first two games also exist
a 2-board setups, where the C-board is integrated into the B-board.
There are several revisions of the A-board, but they are functionally equivalent
and interchangeable except for 89626A-4 DASH used by sf2 which has a 12MHz xtal
replacing the 10Hz one. Note that it's likely that from one point onwards Capcom
simply switched to make only 89626A-4 DASH board, that is all games after a
certain point should use the 12MHz xtal not just sf2.
Verified: Quiz and Dragons (US) comes with the DASH version (original pcb with sticker).
Known A-board revisions:
88617A-4
88617A-5
88617A-7
88617A-7b
89626A-4
89626A-4 DASH
NAME Year B-board # B-board PALs C-board # CPS-B # C-board PALs
------------------------------------------- ---- -------- --------------------- --------- ----------------------- -------------
Forgotten Worlds / Lost Worlds 1988 88618B-2 LWCHR LWIO None CPS-B-01 DL-0411-10001 None
(alt B-board revision) 88621B-2 LW621 LWIO ?
Ghouls 'n Ghosts (World / US) 1988 88620B-2 DM620 LWIO None CPS-B-01 DL-0411-10001 None
(alt B-board revision - Japan) 88622B-2 DM22A LWIO 88622-C-1 CPS-B-01 DL-0411-10001 None
Strider 1989 89624B-2 ST24M1 LWIO 88622-C-1 CPS-B-01 DL-0411-10001 None
(alt B-board version) 89624B-3 ST24B2 LWIO
(alt B-board revision) ? ST22B ?
Dynasty Wars 1989 ? ? ? CPS-B-02 DL-0411-10002
Willow 1989 89624B-3 WL24B LWIO 88622-C-4 CPS-B-03 DL-0411-10003 None
UN Squadron / Area 88 1989 89624B-3 AR24B LWIO 88622-C-4 CPS-B-11 DL-0411-10004 None
(alt B-board revision) 1989 88622B-2 AR22B LWIO
Final Fight (first rev) 1989 89624B-3 S224B IOB1 88622-C-5 CPS-B-04 DL-0411-10005 None
Final Fight (US 900112) ? CPS-B-04@ DL-0411-10001 None
Final Fight (US 900613) ? CPS-B-05 DL-0411-10006
Final Fight (Japan 900305) ? CPS-B-02 DL-0411-10002
1941 1990 ? YI24B ? 88622-C-5 CPS-B-05 DL-0411-10006 ?
Mercs (US) 1990 89624B-3 0224B IOB1 90628-C-1 CPS-B-12 DL-0411-10007 C628
Magic Sword (US) 1990 89624B-3 MS24B IOB1 88622-C-5 CPS-B-13 DL-0411-10008 None
Chiki Chiki Boys / Mega Twins 1990 89624B-3 CK24B IOB1 88622-C-5 CPS-B-14 DL-0411-10009 None
Nemo 1990 89624B-3 NM24B IOB1 88622-C-5 CPS-B-15 DL-0411-10010 None
Carrier Air Wing / U.S. Navy 1990 89624B-3 CA24B IOB1 88622-C-5 CPS-B-16 DL-0411-10011 None
(alt B-board revision) 89625B-1 CA22B
Street Fighter II (910214) 1991 ? STF29 IOB1 90632C-1 CPS-B-17 DL-0411-10012 C632
Street Fighter II (US 910206) CPS-B-17 DL-0411-10012
Street Fighter II (US 910228) CPS-B-18 ?
Street Fighter II (Japan 910306) CPS-B-12 DL-0411-10007
Street Fighter II (US 910318) CPS-B-05 DL-0411-10006
Street Fighter II (US 910411) CPS-B-15 DL-0411-10010
Street Fighter II (World 910522) CPS-B-11 DL-0411-10004
Street Fighter II (US 910522) CPS-B-14 DL-0411-10009
Street Fighter II (US 911101) CPS-B-17 DL-0411-10012
Street Fighter II (Japan 911210) CPS-B-13 DL-0411-10008
Three Wonders* 1991 89624B-3 RT24B IOB1 90630C-4 CPS-B-21 DL-0921-10014 IOC1
(alt B-board revision) 89625B-1 RT22B IOB1
King of Dragons* 1991 90629B-3 KD29B IOB1 90631C-5 CPS-B-21 DL-0921-10014 C632 IOC1
Captain Commando* 1991 91635B-2 CC63B CCPRG IOB1 90631C-5 CPS-B-21 DL-0921-10014 C632 IOC1
Knights of the Round* 1991 91635B-2 KR63B BPRG1 IOB1 90631C-5 CPS-B-21 DL-0921-10014 C632 IOC1
Street Fighter II' Champion Edition 1992 91635B-2 S9263B BPRG1 IOB1 92631C-6 CPS-B-21 DL-0921-10014 C632 IOC1
Varth (World / US) 1992 89624B-3 VA24B IOB1 88622-C-5 CPS-B-04 DL-0411-10005 None
Varth (Japan)* 1992 ? ? ? CPS-B-21 DL-0921-10014 ?
Capcom World 2* 1992 ? Q522B IOB1 ? CPS-B-21 DL-0921-10014 IOC1
Quiz and Dragons (US)* 1992 89625B-1 QD22B IOB1 92641C-1 CPS-B-21 DL-0921-10014 IOC1
Quiz and Dragons (Japan)* 1994 ? ? IOB1 ? CPS-B-21 DL-0921-10014 IOC1
Warriors of Fate* 1992 ? TK263B BPRG1 IOB1 92641C-1 CPS-B-21 DL-0921-10014 IOC1
Street Fighter II Turbo Hyper Fighting 1992 91635B-2 S9263B BPRG1 IOB1 92631C-6 CPS-B-21 DL-0921-10014 C632 IOC1
Cadillacs and Dinosaurs* 1993 ? CD63B BPRG1 IOB1 92641C-1 CPS-B-21 DL-0921-10014 IOC1
Punisher* 1993 91635B-2 PS63B BPRG1 IOB1 92641C-1 CPS-B-21 DL-0921-10014 IOC1
Saturday Night Slam Masters* 1993 ? MB63B BPRG1 IOB1 92641C-1 CPS-B-21 DL-0921-10014 IOC1
Muscle Bomber Duo* 1993 ? ? 92641C-1 CPS-B-21 DL-0921-10014 ?
Quiz Tonosama no Yabou 2 1995 ? ? ? ?
Pnickies 1994 ? ? ? CPS-B-21? DL-0921-10014? ?
Pang 3 1995 94916-10 CP1B1F,CP1B8K,CP1B9KA 92631C-6 CPS-B-21 DL-0921-10014 C632 IOC1
Megaman the Power Battle 1995 ? RCM63B BPRG1 IOB1 ? CPS-B-21 DL-0921-10014 C632 IOC1
@actually CPS-B-01, the original number was scratched out and "04" stamped over it
*denotes Suicide Battery
The C628/C632 PALs on some C-boards probably handle the extra inputs (6 buttons/third player).
You can set the suicide CPS-B-21 chips to their default layer register and priority bit values
if you pull pins 45 and 46 high (floating the pins seems to work, too). The default is the same
values as Street Fighter 2 CE/Turbo.
OUTPUT PORTS
0x00-0x01 OBJ RAM base (/256)
0x02-0x03 Scroll1 (8x8) RAM base (/256)
0x04-0x05 Scroll2 (16x16) RAM base (/256)
0x06-0x07 Scroll3 (32x32) RAM base (/256)
0x08-0x09 rowscroll RAM base (/256)
0x0a-0x0b Palette base (/256) after this register is written to, the palette
is copied from gfxram to the dedicated ram. The palette control
register (see below) determines how the copy should happen.
Tests on a msword pcb show that the minimum alignment for the palette
is 0x400 bytes. The hardware seems to ignore bit 1, while when bit 0
is set the palette doesn't seem to be copied. However, some games set
bit 0 during boot (ghouls, strider, 1941) so it still isn't clear
what bit 0 should actually do.
0x0c-0x0d Scroll 1 X
0x0e-0x0f Scroll 1 Y
0x10-0x11 Scroll 2 X
0x12-0x13 Scroll 2 Y
0x14-0x15 Scroll 3 X
0x16-0x17 Scroll 3 Y
0x18-0x19 Starfield 1 X
0x1a-0x1b Starfield 1 Y
0x1c-0x1d Starfield 2 X
0x1e-0x1f Starfield 2 Y
0x20-0x21 start offset for the rowscroll matrix
0x22-0x23 video control. Usually 0x0e.
bit 0 enables rowscroll on layer 2.
bit 15 is flip screen.
ghouls sets bit 14. Purpose unknown.
1941 uses bits 1-3 by setting them to 0 on screen transitions,
however it also uses the normal layer control register so there
doesn't seem to be an obvious effect.
Games known to use rowscroll:
SF2
Mega Twins (underwater, cave)
Carrier Air Wing (hazy background at beginning of mission 8, put 07 at ff8501 to jump there)
Magic Sword (fire on floor 3; screen distort after continue)
Varth (title screen)
Captain Commando (end game sequence)
Tests done on msword at the beginning of gameplay (many thanks to Corrado Tomaselli for these):
3e is the default value set by the game (not 0e like most games)
3c the last two rows of scroll1 are repeated on the whole screen
3a scroll2 is disabled
36 scroll3 is disabled
2e no visible differences
1e no visible differences
one might suspect that bits 4&5 should disable the star layers, but
Strider sets this register to 0x0e so that's not possible.
TODO:
the scroll2/scroll3 disable bits are supported by the emulation,
while the scroll1 weird effect is not (it doesn't seem to make a
difference on any game).
Some registers move from game to game.. following example strider
0x66-0x67 Layer control register
bits 14-15 seem to be unused
ghouls sets bits 15 in service mode when you press button 2 in
the input test, with no apparent effect on the pcb.
qtono2 sets them both at the game over screen.
bits 6-13 (4 groups of 2 bits) select layer draw order
bits 1-5 enable the three tilemap layers and the two starfield
layers (the bit order changes from game to game).
Only Forgotten Worlds and Strider use the starfield.
bit 0 could be rowscroll related. It is set by captain commando,
varth, mtwins, mssword, cawing while rowscroll is active. However
kodj and sf2 do NOT set this bit while they are using rowscroll.
Tests on the msword pcb show that even if this bit is not set,
rowscroll still works. Therefore, the purpose of this bit is unclear.
0x68-0x69 Priority mask \ Tiles in the layer just below sprites can have
0x6a-0x6b Priority mask | four priority levels, each one associated with one
0x6c-0x6d Priority mask | of these masks. The masks indicate pens in the tile
0x6e-0x6f Priority mask / that have priority over sprites.
0x70-0x71 Palette control register. This indicates which palette
pages to copy when the palette base register is written to.
There is one CPS2 game (Slammasters II) setting this to 0x2f; all the other
games normally set it to 0x3f, though in some cases different values are
used during boot:
ghouls 0x02 (and palette base is set to 9105; palette base is 9100 normally)
strider 0x02 (and palette base is set to 9145; palette base is 9140 normally)
1941 0x02 (and palette base is set to 9145; palette base is 9140 normally)
unsquad 0x0f
kod 0x0f
mtwins 0x0f
bit 0: copy page 0 (sprites)
bit 1: copy page 1 (scroll1)
bit 2: copy page 2 (scroll2)
bit 3: copy page 3 (scroll3)
bit 4: copy page 4 (stars1)
bit 5: copy page 5 (stars2)
An important quirk is that if bit 0 is not set (sprite page is not copied)
page 0 in gfxram is not skipped but instead is copied to page 1; that is,
all pages are moved down by one. For the other pages, if the bit is not
set the gfxram page is skipped.
bits 0-3 have been verified with reasonable confidence on a msword pcb,
while bits 4-5 are only supposed.
Fixed registers
0x80-0x81 Sound command
0x88-0x89 Sound fade
A special note has to be made about tile/sprite codes. Even if all graphics are
stored together in the same ROMs, the hardware knows which part of the ROM space
is 8x8 tiles, 16x16 tiles, 16x16 spites, 32x32 tiles, and all games tested only
draw tiles if their code falls in the valid range. If a tile is out of range, it
is replaced by transparent pixels.
Ideally, this shouldn't be important as far as the emulation is concerned, since
games should only request tiles from valid ranges. In practice, many games contain
bugs which make them try to display out of range tiles. The masking applied by
the hardware therefore needs to be emulated properly, otherwise glitches appear.
There are various versions of the ROM board (B-board), so the implementation
details may vary, but in general the tile ranges are controlled by a PAL found
on the B-board (see the table at the top of this file).
The A-board passes 23 bits of address to the B-board when requesting gfx ROM data.
The B-board selects 64 bits of data, that is 16 4bpp pixels, and returns half of
them depending on a signal from the C board.
The 23 address bits are laid out this way (note that the top 3 bits select the
tile type; the purpose of the top bit is unknown):
sprite 000ccccccccccccccccyyyy
scroll1 001?ccccccccccccccccyyy
scroll2 010ccccccccccccccccyyyy
scroll3 011ccccccccccccccyyyyyx
stars 100000000sxxxxxyyyyyyyy (to be verified)
where
c is the tile code
y is the y position in the tile
x is the x position in the tile (only applicable to 32x32 tiles)
E.g. on the 89624B-3 board, used by cawing and others, the top 13 bits of the
address are passed to the 16L8B PAL @1A, which outputs the /OE signal for roms
1,3,5,7 (together), 2,4,6,8 (together), 10,12,14,16,20,22,24,26 (together) or
11,13,15,17,21,23,25,27 (together).
Note that in cawing only sockets 1,3,5,7 are populated, so effectively there is
only one bank.
The above would mean that
1) 8x8 and 16x16 tiles have a 16-bit tile code, while
32x32 tiles have a 14-bit tile code
2) which ROM bank to use is determined by
bits 15-7 of a 8x8 tile code,
bits 15-6 of a 16x16 tile code,
bits 13-4 of a 32x32 tile code
If the PAL decides that the tile code is out of range and doesn't output any /OE
signal, no ROM is read and pullup resistors force the result to all 1 (which
means a transparent tile).
Note that there are several known cases (nemo, cawing, 3wonders, varth, etc.) where
16x16 tiles are used for BOTH sprites and scroll2.
Ideally, the PALs should be dumped and loaded like the ROMs, and the mapping should
be derived from the loaded PALs at run time.
In practice, this is unlikely to happen, so we'll have to tolerate using hardcoded
maps for every game.
Known Bug List
==============
CPS2:
* CPS2 can do raster effects, certainly used by ssf2 (Cammy, DeeJay, T.Hawk levels),
msh (lava level, early in attract mode) and maybe others (xmcotaj, vsavj).
IRQ4 is some sort of scanline interrupt used for that purpose.
* Its unknown what CPS2_OBJ_BASE register (0x400000) does but it is not a object base
register. All games use 0x7000 even if 0x7080 is used at this register (checked on
real HW). Maybe it sets the object bank used when cps2_objram_bank is set.
* Sprites are currently lagged by one frame to keep sync with backgrounds. This causes
sprites to stay on screen one frame longer (visable in VSAV attract mode).
* The boot screen of some CPS2 games has a blue background instead of black,
however that might be the correct behaviour.
Marvel Vs. Capcom
* Sometimes currupt gfx are displayed on the 32x32 layer as the screen flashes at the
start of super combo moves. The problem seems to be due to tiles being fetched before
the first 32x32 tile offset and results in data coming from 16x16 or 8x8 tiles instead.
CPS1:
SF2
* Missing chain in the foreground in Ken's level, and sign in Chun Li's level.
Those graphics are in the backmost layer.
King of Dragons (World).
* Distortion effect missing on character description screen during attract
mode. The game rapidly toggles on and off the layer enable bit.
I think this IS the correct behaviour. The Japanese version does the
distortion as expected.
3wonders
* writes to output ports 42, 44, 46.
qad
* layer enable mask incomplete
Unknown issues
==============
There are often some redundant high bits in the scroll layer's attributes.
I think that these are spare bits that the game uses for to store additional
information, not used by the hardware.
The games seem to use them to mark platforms, kill zones and no-go areas.
***************************************************************************/
#include "driver.h"
#include "cps1.h"
#define VERBOSE 0
/********************************************************************
Configuration table:
********************************************************************/
/* Game specific data */
#define GFXTYPE_SPRITES (1<<0)
#define GFXTYPE_SCROLL1 (1<<1)
#define GFXTYPE_SCROLL2 (1<<2)
#define GFXTYPE_SCROLL3 (1<<3)
#define GFXTYPE_STARS (1<<4)
struct gfx_range
{
// start and end are as passed by the game (shift adjusted to be all
// in the same scale a 8x8 tiles): they don't necessarily match the
// position in ROM.
int type;
int start;
int end;
int bank;
};
struct CPS1config
{
const char *name; /* game driver name */
/* Some games interrogate a couple of registers on bootup. */
/* These are CPS1 board B self test checks. They wander from game to */
/* game. */
int cpsb_addr; /* CPS board B test register address */
int cpsb_value; /* CPS board B test register expected value */
/* some games use as a protection check the ability to do 16-bit multiplies */
/* with a 32-bit result, by writing the factors to two ports and reading the */
/* result from two other ports. */
/* It looks like this feature was introduced with 3wonders (CPSB ID = 08xx) */
int mult_factor1;
int mult_factor2;
int mult_result_lo;
int mult_result_hi;
int layer_control;
int priority[4];
int palette_control; /* Control register? seems to be always 0x3f */
/* ideally, the layer enable masks should consist of only one bit, */
/* but in many cases it is unknown which bit is which. */
int layer_enable_mask[5];
int bank_size;
const struct gfx_range *bank_mapper;
int bank_scroll1;
int bank_scroll2;
int bank_scroll3;
/* Some characters aren't visible */
const int start_scroll2;
const int end_scroll2;
const int start_scroll3;
const int end_scroll3;
int bootleg_kludge;
};
static const struct CPS1config *cps1_game_config;
/* CPSB ID multiply protection ctrl priority masks palctrl layer enable masks */
#define CPS_B_01 0x00,0x0000, 0,0,0,0, /* n/a */ 0x66,{0x68,0x6a,0x6c,0x6e},0x70, {0x02,0x04,0x08,0x30,0x30}
#define CPS_B_02 0x60,0x0002, 0,0,0,0, /* n/a */ 0x6c,{0x6a,0x68,0x66,0x64},0x62, {0x02,0x04,0x08,0x00,0x00}
#define CPS_B_03 0x00,0x0000, 0,0,0,0, /* n/a */ 0x70,{0x6e,0x6c,0x6a,0x68},0x66, {0x20,0x10,0x08,0x00,0x00}
#define CPS_B_04 0x60,0x0004, 0,0,0,0, /* n/a */ 0x6e,{0x66,0x70,0x68,0x72},0x6a, {0x02,0x0c,0x0c,0x00,0x00}
#define CPS_B_05 0x60,0x0005, 0,0,0,0, /* n/a */ 0x68,{0x6a,0x6c,0x6e,0x70},0x72, {0x02,0x08,0x20,0x14,0x14}
#define CPS_B_11 0x72,0x0401, 0,0,0,0, /* n/a */ 0x66,{0x68,0x6a,0x6c,0x6e},0x70, {0x08,0x10,0x20,0x00,0x00}
#define CPS_B_12 0x60,0x0402, 0,0,0,0, /* n/a */ 0x6c,{0x6a,0x68,0x66,0x64},0x62, {0x02,0x04,0x08,0x00,0x00}
#define CPS_B_13 0x6e,0x0403, 0,0,0,0, /* n/a */ 0x62,{0x64,0x66,0x68,0x6a},0x6c, {0x20,0x02,0x04,0x00,0x00}
#define CPS_B_14 0x5e,0x0404, 0,0,0,0, /* n/a */ 0x52,{0x54,0x56,0x58,0x5a},0x5c, {0x08,0x20,0x10,0x00,0x00}
#define CPS_B_15 0x4e,0x0405, 0,0,0,0, /* n/a */ 0x42,{0x44,0x46,0x48,0x4a},0x4c, {0x04,0x02,0x20,0x00,0x00}
#define CPS_B_16 0x40,0x0406, 0,0,0,0, /* n/a */ 0x4c,{0x4a,0x48,0x46,0x44},0x42, {0x10,0x0a,0x0a,0x00,0x00}
#define CPS_B_17 0x48,0x0407, 0,0,0,0, /* n/a */ 0x54,{0x52,0x50,0x4e,0x4c},0x4a, {0x08,0x10,0x02,0x00,0x00}
#define CPS_B_18 0xd0,0x0408, 0,0,0,0, /* n/a */ 0xdc,{0xda,0xd8,0xd6,0xd4},0xd2, {0x10,0x08,0x02,0x00,0x00}
#define NOBATTRY 0x00,0x0000, 0x40,0x42,0x44,0x46, 0x66,{0x68,0x6a,0x6c,0x6e},0x70, {0x02,0x04,0x08,0x30,0x30} // pang3 sets layer enable to 0x26 on startup
#define BATTRY_1 0x72,0x0800, 0x4e,0x4c,0x4a,0x48, 0x68,{0x66,0x64,0x62,0x60},0x70, {0x20,0x04,0x08,0x12,0x12}
#define BATTRY_2 0x00,0x0000, 0x5e,0x5c,0x5a,0x58, 0x60,{0x6e,0x6c,0x6a,0x68},0x70, {0x30,0x08,0x30,0x00,0x00}
#define BATTRY_3 0x00,0x0000, 0x46,0x44,0x42,0x40, 0x60,{0x6e,0x6c,0x6a,0x68},0x70, {0x20,0x12,0x12,0x00,0x00}
#define BATTRY_4 0x00,0x0000, 0x46,0x44,0x42,0x40, 0x68,{0x66,0x64,0x62,0x60},0x70, {0x20,0x10,0x02,0x00,0x00}
#define BATTRY_5 0x00,0x0000, 0x4e,0x4c,0x4a,0x48, 0x60,{0x6e,0x6c,0x6a,0x68},0x70, {0x20,0x06,0x06,0x00,0x00}
#define BATTRY_6 0x00,0x0000, 0x00,0x00,0x00,0x00, 0x60,{0x6e,0x6c,0x6a,0x68},0x70, {0x20,0x14,0x14,0x00,0x00}
#define BATTRY_7 0x00,0x0000, 0x00,0x00,0x00,0x00, 0x6c,{0x00,0x00,0x00,0x00},0x52, {0x14,0x02,0x14,0x00,0x00}
#define QSOUND_1 0x00,0x0000, 0x00,0x00,0x00,0x00, 0x62,{0x64,0x66,0x68,0x6a},0x6c, {0x10,0x08,0x04,0x00,0x00}
#define QSOUND_2 0x00,0x0000, 0x00,0x00,0x00,0x00, 0x4a,{0x4c,0x4e,0x40,0x42},0x44, {0x16,0x16,0x16,0x00,0x00}
#define QSOUND_3 0x4e,0x0c00, 0x00,0x00,0x00,0x00, 0x52,{0x54,0x56,0x48,0x4a},0x4c, {0x04,0x02,0x20,0x00,0x00}
#define QSOUND_4 0x6e,0x0c01, 0x00,0x00,0x00,0x00, 0x56,{0x40,0x42,0x68,0x6a},0x6c, {0x04,0x08,0x10,0x00,0x00}
#define QSOUND_5 0x5e,0x0c02, 0x00,0x00,0x00,0x00, 0x6a,{0x6c,0x6e,0x70,0x72},0x5c, {0x04,0x08,0x10,0x00,0x00}
#define HACK_B_1 0x00,0x0000, 0x00,0x00,0x00,0x00, 0x54,{0x52,0x50,0x4e,0x4c},0x5c, {0xff,0xff,0xff,0x00,0x00}
static const struct gfx_range mapper_LWCHR[] =
{
// verified from PAL dump (PAL16P8B @ 3A):
// bank size = 8000
// bank 0 = pin 16
// bank 1 = pin 19
// pin 12 and pin 14 are always enabled (except for stars)
// note that allowed codes go up to 0x1ffff but physical ROM is half that size
/* type start end bank */
{ GFXTYPE_STARS, 0x00000, 0x1ffff, 0 },
{ GFXTYPE_SCROLL2, 0x00000, 0x1ffff, 0 },
{ GFXTYPE_SCROLL3, 0x00000, 0x1ffff, 0 },
{ GFXTYPE_SPRITES, 0x00000, 0x07fff, 1 },
{ GFXTYPE_SCROLL1, 0x00000, 0x1ffff, 1 },
{ 0 }
};
static const struct gfx_range mapper_DM620[] =
{
/* type start end bank */
{ GFXTYPE_SPRITES, 0x0000, 0x1fff, 0 },
{ GFXTYPE_SCROLL1, 0x2000, 0x3fff, 0 },
{ GFXTYPE_SCROLL2, 0x4000, 0x7fff, 0 },
{ GFXTYPE_SCROLL3, 0x8000, 0x9fff, 1 },
{ GFXTYPE_SPRITES, 0x2000, 0x7fff, 1 }, // a000-ffff physical
{ 0 }
};
static const struct gfx_range mapper_ST24M1[] =
{
// verified from PAL dump:
// bank size = 4000
// bank 0 = pin 19
// bank 1 = pin 16
// bank 2 = pin 14
// bank 3 = pin 12
/* type start end bank */
{ GFXTYPE_STARS, 0x00000, 0x1ffff, 0 },
{ GFXTYPE_SPRITES, 0x00000, 0x03fff, 0 },
{ GFXTYPE_SPRITES, 0x04000, 0x04fff, 1 },
{ GFXTYPE_SCROLL2, 0x04000, 0x07fff, 1 },
{ GFXTYPE_SCROLL3, 0x00000, 0x03fff, 2 },
{ GFXTYPE_SCROLL3, 0x04000, 0x07fff, 3 },
{ GFXTYPE_SCROLL1, 0x07000, 0x07fff, 3 },
{ 0 }
};
static const struct gfx_range mapper_dynwar[] = // unknown PAL
{
/* type start end bank */
{ GFXTYPE_SPRITES, 0x0000, 0x5fff, 0 },
{ GFXTYPE_SCROLL1, 0x6000, 0x7fff, 0 },
{ GFXTYPE_SCROLL3, 0x0000, 0x3fff, 1 }, // 8000-bfff physical
{ GFXTYPE_SCROLL2, 0x4000, 0x7fff, 1 }, // c000-ffff physical
{ 0 }
};
static const struct gfx_range mapper_WL24B[] =
{
// verified from PAL dump:
// bank size = 8000
// bank 0 = pin 16
// bank 1 = pin 12
// pin 14 and pin 19 are never enabled
/* type start end bank */
{ GFXTYPE_SPRITES, 0x0000, 0x4fff, 0 },
{ GFXTYPE_SCROLL3, 0x5000, 0x6fff, 0 },
{ GFXTYPE_SCROLL1, 0x7000, 0x7fff, 0 },
{ GFXTYPE_SCROLL2, 0x0000, 0x3fff, 1 },
{ 0 }
};
static const struct gfx_range mapper_S224B[] =
{
// verified from PAL dump:
// bank size = 8000
// bank 0 = pin 16
// pin 12 & pin 14 give an alternate half-size mapping which would allow to
// populate the 8-bit ROM sockets instead of the 16-bit ones:
// pin 12
// 0 00000 - 03fff
// pin 14
// 0 04000 - 043ff
// 1 04400 - 04bff
// 2 06000 - 07fff
// 3 04c00 - 05fff
// pin 19 is never enabled
/* type start end bank */
{ GFXTYPE_SPRITES, 0x0000, 0x43ff, 0 },
{ GFXTYPE_SCROLL1, 0x4400, 0x4bff, 0 },
{ GFXTYPE_SCROLL3, 0x4c00, 0x5fff, 0 },
{ GFXTYPE_SCROLL2, 0x6000, 0x7fff, 0 },
{ 0 }
};
static const struct gfx_range mapper_YI24B[] =
{
// verified from JED:
// bank size = 8000
// bank 0 = pin 16
// pin 12 & pin 14 give an alternate half-size mapping which would allow to
// populate the 8-bit ROM sockets instead of the 16-bit ones:
// pin 12
// 0 0000-1fff
// 3 2000-3fff
// pin 14
// 1 4000-47ff
// 2 4800-7fff
// pin 19 is never enabled
/* type start end bank */
{ GFXTYPE_SPRITES, 0x0000, 0x1fff, 0 },
{ GFXTYPE_SCROLL3, 0x2000, 0x3fff, 0 },
{ GFXTYPE_SCROLL1, 0x4000, 0x47ff, 0 },
{ GFXTYPE_SCROLL2, 0x4800, 0x7fff, 0 },
{ 0 }
};
static const struct gfx_range mapper_AR24B[] =
{
// verified from JED:
// bank size = 8000
// bank 0 = pin 16
// pin 12 & pin 14 give an alternate half-size mapping which would allow to
// populate the 8-bit ROM sockets instead of the 16-bit ones:
// pin 12
// 0 0000-2fff
// 1 3000-3fff
// pin 14
// 2 4000-5fff
// 3 6000-7fff
// pin 19 is never enabled
/* type start end bank */
{ GFXTYPE_SPRITES, 0x0000, 0x2fff, 0 },
{ GFXTYPE_SCROLL1, 0x3000, 0x3fff, 0 },
{ GFXTYPE_SCROLL2, 0x4000, 0x5fff, 0 },
{ GFXTYPE_SCROLL3, 0x6000, 0x7fff, 0 },
{ 0 }
};
static const struct gfx_range mapper_0224B[] =
{
// verified from PAL dump:
// bank size = 8000
// bank 0 = pin 19
// bank 1 = pin 12
// pin 16 & pin 14 appear to be an alternate half-size mapping for bank 0
// but scroll1 is missing:
// pin 16
// 2 00c00 - 03bff
// 3 03c00 - 03fff
// pin 14
// 3 04000 - 04bff
// 0 04c00 - 07fff
/* type start end bank */
{ GFXTYPE_SCROLL1, 0x0000, 0x0bff, 0 },
{ GFXTYPE_SCROLL2, 0x0c00, 0x3bff, 0 },
{ GFXTYPE_SCROLL3, 0x3c00, 0x4bff, 0 },
{ GFXTYPE_SPRITES, 0x4c00, 0x7fff, 0 },
{ GFXTYPE_SPRITES, 0x8000, 0xa7ff, 1 },
{ GFXTYPE_SCROLL2, 0xa800, 0xb7ff, 1 },
{ GFXTYPE_SCROLL3, 0xb800, 0xbfff, 1 },
{ 0 }
};
static const struct gfx_range mapper_MS24B[] =
{
// verified from PAL dump:
// bank size = 8000
// bank 0 = pin 16 or pin 14 (for 16-bit or 8-bit ROMs)
// pin 12 is enabled only for sprites, purpose unknown
// 0 0000-3fff
// pin 19 is never enabled
/* type start end bank */
{ GFXTYPE_SPRITES, 0x0000, 0x3fff, 0 },
{ GFXTYPE_SCROLL1, 0x4000, 0x4fff, 0 },
{ GFXTYPE_SCROLL2, 0x5000, 0x6fff, 0 },
{ GFXTYPE_SCROLL3, 0x7000, 0x7fff, 0 },
{ 0 }
};
static const struct gfx_range mapper_CK24B[] =
{
/* type start end bank */
{ GFXTYPE_SPRITES, 0x0000, 0x2fff, 0 },
{ GFXTYPE_SCROLL1, 0x3000, 0x3fff, 0 },
{ GFXTYPE_SCROLL2, 0x4000, 0x6fff, 0 },
{ GFXTYPE_SCROLL3, 0x7000, 0x7fff, 0 },
{ 0 }
};
static const struct gfx_range mapper_NM24B[] =
{
// verified from PAL dump:
// bank size = 8000
// bank 0 = pin 16
// pin 12 & pin 14 give an alternate half-size mapping which would allow to
// populate the 8-bit ROM sockets instead of the 16-bit ones:
// pin 12
// 0 00000 - 03fff
// 2 00000 - 03fff
// pin 14
// 1 04000 - 047ff
// 0 04800 - 067ff
// 2 04800 - 067ff
// 3 06800 - 07fff
// pin 19 is never enabled
/* type start end bank */
{ GFXTYPE_SPRITES, 0x0000, 0x3fff, 0 },
{ GFXTYPE_SCROLL2, 0x0000, 0x3fff, 0 },
{ GFXTYPE_SCROLL1, 0x4000, 0x47ff, 0 },
{ GFXTYPE_SPRITES, 0x4800, 0x67ff, 0 },
{ GFXTYPE_SCROLL2, 0x4800, 0x67ff, 0 },
{ GFXTYPE_SCROLL3, 0x6800, 0x7fff, 0 },
{ 0 }
};
static const struct gfx_range mapper_CA24B[] =
{
// verified from PAL dump:
// bank size = 8000
// bank 0 = pin 16
// pin 12 & pin 14 give an alternate half-size mapping which would allow to
// populate the 8-bit ROM sockets instead of the 16-bit ones:
// pin 12
// 0 0000-2fff
// 2 0000-2fff
// 3 3000-3fff
// pin 14
// 3 4000-4fff
// 1 5000-57ff
// 0 5800-7fff
// 2 5800-7fff
// pin 19 is never enabled (actually it is always enabled when PAL pin 1 is 1, purpose unknown)
/* type start end bank */
{ GFXTYPE_SPRITES, 0x0000, 0x2fff, 0 },
{ GFXTYPE_SCROLL2, 0x0000, 0x2fff, 0 },
{ GFXTYPE_SCROLL3, 0x3000, 0x4fff, 0 },
{ GFXTYPE_SCROLL1, 0x5000, 0x57ff, 0 },
{ GFXTYPE_SPRITES, 0x5800, 0x7fff, 0 },
{ GFXTYPE_SCROLL2, 0x5800, 0x7fff, 0 },
{ 0 }
};
static const struct gfx_range mapper_STF29[] =
{
/* type start end bank */
{ GFXTYPE_SPRITES, 0x00000, 0x07fff, 0 },
{ GFXTYPE_SPRITES, 0x08000, 0x0ffff, 1 },
{ GFXTYPE_SPRITES, 0x10000, 0x11fff, 2 },
{ GFXTYPE_SCROLL3, 0x02000, 0x03fff, 2 }, // 12000-13fff physical
{ GFXTYPE_SCROLL1, 0x04000, 0x04fff, 2 }, // 14000-14fff physical
{ GFXTYPE_SCROLL2, 0x05000, 0x07fff, 2 }, // 15000-17fff physical
{ 0 }
};
static const struct gfx_range mapper_RT24B[] =
{
/* type start end bank */
{ GFXTYPE_SPRITES, 0x0000, 0x53ff, 0 },
{ GFXTYPE_SCROLL1, 0x5400, 0x6fff, 0 },
{ GFXTYPE_SCROLL3, 0x7000, 0x7fff, 0 },
{ GFXTYPE_SCROLL3, 0x0000, 0x27ff, 1 }, // 8000-a7ff physical
{ GFXTYPE_SCROLL2, 0x2800, 0x53ff, 1 }, // a800-d3ff physical
{ GFXTYPE_SPRITES | GFXTYPE_SCROLL2, 0x5400, 0x7fff, 1 }, // d400-ffff physical
{ 0 }
};
static const struct gfx_range mapper_KD29B[] =
{
/* type start end bank */
{ GFXTYPE_SPRITES, 0x0000, 0x7fff, 0 },
{ GFXTYPE_SPRITES, 0x8000, 0x8fff, 1 },
{ GFXTYPE_SCROLL2, 0x9000, 0xbfff, 1 },
{ GFXTYPE_SCROLL1, 0xc000, 0xd7ff, 1 },
{ GFXTYPE_SCROLL3, 0xd800, 0xffff, 1 },
{ 0 }
};
static const struct gfx_range mapper_CC63B[] =
{
/* type start end bank */
{ GFXTYPE_SPRITES, 0x0000, 0x7fff, 0 },
{ GFXTYPE_SPRITES, 0x8000, 0x9fff, 1 },
{ GFXTYPE_SCROLL3, 0xa000, 0xbfff, 1 },
{ GFXTYPE_SCROLL1, 0xc000, 0xcfff, 1 },
{ GFXTYPE_SCROLL2, 0xd000, 0xffff, 1 },
{ 0 }
};
static const struct gfx_range mapper_KR63B[] =
{
/* type start end bank */
{ GFXTYPE_SPRITES, 0x0000, 0x7fff, 0 },
{ GFXTYPE_SPRITES, 0x8000, 0x87ff, 1 },
{ GFXTYPE_SCROLL1, 0x8800, 0x97ff, 1 },
{ GFXTYPE_SCROLL2, 0x9800, 0xcfff, 1 },
{ GFXTYPE_SCROLL3, 0xd000, 0xffff, 1 },
{ 0 }
};
static const struct gfx_range mapper_S9263B[] =
{
/* type start end bank */
{ GFXTYPE_SPRITES, 0x00000, 0x07fff, 0 },
{ GFXTYPE_SPRITES, 0x08000, 0x0ffff, 1 },
{ GFXTYPE_SPRITES, 0x10000, 0x11fff, 2 },
{ GFXTYPE_SCROLL3, 0x02000, 0x03fff, 2 }, // 12000-13fff physical
{ GFXTYPE_SCROLL1, 0x04000, 0x04fff, 2 }, // 14000-14fff physical
{ GFXTYPE_SCROLL2, 0x05000, 0x07fff, 2 }, // 15000-17fff physical
{ 0 }
};
static const struct gfx_range mapper_VA24B[] =
{
/* type start end bank */
{ GFXTYPE_SPRITES | GFXTYPE_SCROLL2, 0x0000, 0x57ff, 0 },
{ GFXTYPE_SCROLL1, 0x5800, 0x5fff, 0 },
{ GFXTYPE_SCROLL3, 0x6000, 0x7fff, 0 },
{ 0 }
};
static const struct gfx_range mapper_Q522B[] =
{
/* type start end bank */
{ GFXTYPE_SPRITES | GFXTYPE_SCROLL2, 0x0000, 0x6fff, 0 },
{ GFXTYPE_SCROLL3, 0x7000, 0x77ff, 0 },
{ GFXTYPE_SCROLL1, 0x7800, 0x7fff, 0 },
{ 0 }
};
static const struct gfx_range mapper_TK263B[] =
{
/* type start end bank */
{ GFXTYPE_SPRITES, 0x0000, 0x7fff, 0 },
{ GFXTYPE_SPRITES | GFXTYPE_SCROLL2, 0x8000, 0xcfff, 1 },
{ GFXTYPE_SCROLL1, 0xd000, 0xdfff, 1 },
{ GFXTYPE_SCROLL3, 0xe000, 0xffff, 1 },
{ 0 }
};
static const struct gfx_range mapper_CD63B[] =
{
/* type start end bank */
{ GFXTYPE_SCROLL1, 0x0000, 0x0fff, 0 },
{ GFXTYPE_SPRITES, 0x1000, 0x7fff, 0 },
{ GFXTYPE_SPRITES | GFXTYPE_SCROLL2, 0x8000, 0xdfff, 1 },
{ GFXTYPE_SCROLL3, 0xe000, 0xffff, 1 },
{ 0 }
};
static const struct gfx_range mapper_PS63B[] =
{
/* type start end bank */
{ GFXTYPE_SCROLL1, 0x0000, 0x0fff, 0 },
{ GFXTYPE_SPRITES, 0x1000, 0x7fff, 0 },
{ GFXTYPE_SPRITES, 0x8000, 0xa7ff, 1 },
{ GFXTYPE_SCROLL2, 0xa800, 0xdbff, 1 },
{ GFXTYPE_SCROLL3, 0xdc00, 0xffff, 1 },
{ 0 }
};
static const struct gfx_range mapper_MB63B[] =
{
/* type start end bank */
{ GFXTYPE_SCROLL1, 0x00000, 0x00fff, 0 },
{ GFXTYPE_SPRITES | GFXTYPE_SCROLL2, 0x01000, 0x07fff, 0 },
{ GFXTYPE_SPRITES | GFXTYPE_SCROLL2, 0x08000, 0x0ffff, 1 },
{ GFXTYPE_SPRITES | GFXTYPE_SCROLL2, 0x10000, 0x167ff, 2 },
{ GFXTYPE_SCROLL3, 0x16800, 0x17fff, 2 },
{ 0 }
};
static const struct gfx_range mapper_QD22B[] =
{
/* type start end bank */
{ GFXTYPE_SCROLL1, 0x0000, 0x07ff, 0 },
{ GFXTYPE_SPRITES | GFXTYPE_SCROLL2, 0x0800, 0x27ff, 0 },
{ GFXTYPE_SCROLL3, 0x2800, 0x3fff, 0 },
{ 0 }
};
static const struct gfx_range mapper_qadj[] =
{
/* type start end bank */
{ GFXTYPE_SCROLL1, 0x0000, 0x07ff, 0 },
{ GFXTYPE_SCROLL3, 0x0800, 0x1fff, 0 },
{ GFXTYPE_SPRITES | GFXTYPE_SCROLL2, 0x2000, 0x7fff, 0 },
{ 0 }
};
static const struct gfx_range mapper_qtono2[] =
{
/* type start end bank */
{ GFXTYPE_SCROLL1, 0x0000, 0x0fff, 0 },
{ GFXTYPE_SCROLL3, 0x1000, 0x3fff, 0 },
{ GFXTYPE_SPRITES | GFXTYPE_SCROLL2, 0x4000, 0x7fff, 0 },
{ GFXTYPE_SPRITES | GFXTYPE_SCROLL2, 0x8000, 0xffff, 1 },
{ 0 }
};
static const struct gfx_range mapper_RCM63B[] =
{
/* type start end bank */
{ GFXTYPE_SCROLL1, 0x00000, 0x017ff, 0 },
{ GFXTYPE_SPRITES, 0x01800, 0x07fff, 0 },
{ GFXTYPE_SPRITES, 0x08000, 0x0ffff, 1 },
{ GFXTYPE_SPRITES | GFXTYPE_SCROLL2, 0x10000, 0x17fff, 2 },
{ GFXTYPE_SCROLL2, 0x18000, 0x19fff, 3 },
{ GFXTYPE_SCROLL3, 0x1a000, 0x1ffff, 3 },
{ 0 }
};
static const struct gfx_range mapper_pnickj[] =
{
/* type start end bank */
{ GFXTYPE_SCROLL1, 0x0000, 0x0fff, 0 },
{ GFXTYPE_SPRITES | GFXTYPE_SCROLL2, 0x1000, 0x5fff, 0 },
{ GFXTYPE_SCROLL3, 0x6000, 0x7fff, 0 },
{ 0 }
};
static const struct gfx_range mapper_pang3[] =
{
/* type start end bank */
{ GFXTYPE_SPRITES | GFXTYPE_SCROLL2, 0x0000, 0x7fff, 0 },
{ GFXTYPE_SPRITES | GFXTYPE_SCROLL2, 0x8000, 0x9fff, 1 },
{ GFXTYPE_SCROLL1, 0xa000, 0xbfff, 1 },
{ GFXTYPE_SCROLL3, 0xc000, 0xffff, 1 },
{ 0 }
};
/*
I don't know if CPS2 ROM boards use PALs as well; since all games seem to be
well behaved, I'll just assume that there is no strong checking of gfx type.
(sprites are not listed here because they are addressed linearly by the CPS2
sprite code)
*/
static const struct gfx_range mapper_cps2[] =
{
/* type start end bank */
{ GFXTYPE_SCROLL1 | GFXTYPE_SCROLL2 | GFXTYPE_SCROLL3, 0x00000, 0x07fff, 4 }, // 20000-27fff physical
{ GFXTYPE_SCROLL1 | GFXTYPE_SCROLL2 | GFXTYPE_SCROLL3, 0x08000, 0x0ffff, 5 }, // 28000-2ffff physical
{ GFXTYPE_SCROLL2 | GFXTYPE_SCROLL3, 0x10000, 0x17fff, 6 }, // 30000-37fff physical
{ GFXTYPE_SCROLL2 | GFXTYPE_SCROLL3, 0x18000, 0x1ffff, 7 }, // 38000-3ffff physical
{ 0 }
};
static const struct CPS1config cps1_config_table[]=
{
/* name CPSB bank size gfx mapper kludge */
{"forgottn", CPS_B_01, 0x8000, mapper_LWCHR },
{"lostwrld", CPS_B_01, 0x8000, mapper_LWCHR },
{"ghouls", CPS_B_01, 0x8000, mapper_DM620 },
{"ghoulsu", CPS_B_01, 0x8000, mapper_DM620 },
{"daimakai", CPS_B_01, 0x8000, mapper_DM620 },
{"strider", CPS_B_01, 0x4000, mapper_ST24M1 },
{"stridrua", CPS_B_01, 0x4000, mapper_ST24M1 },
{"striderj", CPS_B_01, 0x4000, mapper_ST24M1 },
{"stridrja", CPS_B_01, 0x4000, mapper_ST24M1 },
{"dynwar", CPS_B_02, 0x8000, mapper_dynwar },
{"dynwarj", CPS_B_02, 0x8000, mapper_dynwar },
{"willow", CPS_B_03, 0x8000, mapper_WL24B },
{"willowj", CPS_B_03, 0x8000, mapper_WL24B },
{"willowje", CPS_B_03, 0x8000, mapper_WL24B },
{"ffight", CPS_B_04, 0x8000, mapper_S224B },
{"ffightu", CPS_B_04, 0x8000, mapper_S224B },
{"ffightua", CPS_B_01, 0x8000, mapper_S224B },
{"ffightub", CPS_B_05, 0x8000, mapper_S224B },
{"ffightj", CPS_B_04, 0x8000, mapper_S224B },
{"ffightj1", CPS_B_02, 0x8000, mapper_S224B },
{"1941", CPS_B_05, 0x8000, mapper_YI24B },
{"1941j", CPS_B_05, 0x8000, mapper_YI24B },
{"unsquad", CPS_B_11, 0x8000, mapper_AR24B }, /* CPSB ID not checked, but it's the same as sf2eg */
{"area88", CPS_B_11, 0x8000, mapper_AR24B }, /* CPSB ID not checked, but it's the same as sf2eg */
{"mercs", CPS_B_12, 0x8000, mapper_0224B }, /* (uses port 74) */
{"mercsu", CPS_B_12, 0x8000, mapper_0224B }, /* (uses port 74) */
{"mercsua", CPS_B_12, 0x8000, mapper_0224B }, /* (uses port 74) */
{"mercsj", CPS_B_12, 0x8000, mapper_0224B }, /* (uses port 74) */
{"msword", CPS_B_13, 0x8000, mapper_MS24B }, /* CPSB ID not checked, but it's the same as sf2j */
{"mswordr1", CPS_B_13, 0x8000, mapper_MS24B }, /* CPSB ID not checked, but it's the same as sf2j */
{"mswordu", CPS_B_13, 0x8000, mapper_MS24B }, /* CPSB ID not checked, but it's the same as sf2j */
{"mswordj", CPS_B_13, 0x8000, mapper_MS24B }, /* CPSB ID not checked, but it's the same as sf2j */
{"mtwins", CPS_B_14, 0x8000, mapper_CK24B },
{"chikij", CPS_B_14, 0x8000, mapper_CK24B },
{"nemo", CPS_B_15, 0x8000, mapper_NM24B },
{"nemoj", CPS_B_15, 0x8000, mapper_NM24B },
{"cawing", CPS_B_16, 0x8000, mapper_CA24B },
{"cawingr1", CPS_B_16, 0x8000, mapper_CA24B },
{"cawingu", CPS_B_16, 0x8000, mapper_CA24B },
{"cawingj", CPS_B_16, 0x8000, mapper_CA24B },
{"sf2", CPS_B_11, 0x8000, mapper_STF29 },
{"sf2eb", CPS_B_17, 0x8000, mapper_STF29 },
{"sf2ua", CPS_B_17, 0x8000, mapper_STF29 },
{"sf2ub", CPS_B_17, 0x8000, mapper_STF29 },
{"sf2ud", CPS_B_05, 0x8000, mapper_STF29 },
{"sf2ue", CPS_B_18, 0x8000, mapper_STF29 },
{"sf2uf", CPS_B_15, 0x8000, mapper_STF29 },
{"sf2ui", CPS_B_14, 0x8000, mapper_STF29 },
{"sf2uk", CPS_B_17, 0x8000, mapper_STF29 }, // check CPS_B
{"sf2j", CPS_B_13, 0x8000, mapper_STF29 },
{"sf2ja", CPS_B_17, 0x8000, mapper_STF29 },
{"sf2jc", CPS_B_12, 0x8000, mapper_STF29 },
/* from here onwards the CPS-B board has suicide battery and multiply protection */
{"3wonders", BATTRY_1, 0x8000, mapper_RT24B },
{"3wonderu", BATTRY_1, 0x8000, mapper_RT24B },
{"wonder3", BATTRY_1, 0x8000, mapper_RT24B },
{"kod", BATTRY_2, 0x8000, mapper_KD29B },
{"kodu", BATTRY_2, 0x8000, mapper_KD29B },
{"kodj", BATTRY_2, 0x8000, mapper_KD29B },
{"kodb", BATTRY_2, 0x8000, mapper_KD29B }, /* bootleg, doesn't use multiply protection */
{"captcomm", BATTRY_3, 0x8000, mapper_CC63B },
{"captcomu", BATTRY_3, 0x8000, mapper_CC63B },
{"captcomj", BATTRY_3, 0x8000, mapper_CC63B },
{"knights", BATTRY_4, 0x8000, mapper_KR63B },
{"knightsu", BATTRY_4, 0x8000, mapper_KR63B },
{"knightsj", BATTRY_4, 0x8000, mapper_KR63B },
{"sf2ce", NOBATTRY, 0x8000, mapper_S9263B },
{"sf2ceua", NOBATTRY, 0x8000, mapper_S9263B },
{"sf2ceub", NOBATTRY, 0x8000, mapper_S9263B },
{"sf2ceuc", NOBATTRY, 0x8000, mapper_S9263B },
{"sf2cej", NOBATTRY, 0x8000, mapper_S9263B },
{"sf2rb", NOBATTRY, 0x8000, mapper_S9263B },
{"sf2rb2", NOBATTRY, 0x8000, mapper_S9263B },
{"sf2red", NOBATTRY, 0x8000, mapper_S9263B },
{"sf2v004", NOBATTRY, 0x8000, mapper_S9263B },
{"sf2accp2", NOBATTRY, 0x8000, mapper_S9263B },
{"sf2m1", NOBATTRY, 0x8000, mapper_S9263B },
{"sf2m2", NOBATTRY, 0x8000, mapper_S9263B },
{"sf2m3", NOBATTRY, 0x8000, mapper_S9263B },
{"sf2m4", HACK_B_1, 0x8000, mapper_S9263B, 1 },
{"sf2m5", NOBATTRY, 0x8000, mapper_S9263B, 1 },
{"sf2m6", NOBATTRY, 0x8000, mapper_S9263B, 1 },
{"sf2m7", NOBATTRY, 0x8000, mapper_S9263B, 1 },
{"sf2yyc", NOBATTRY, 0x8000, mapper_S9263B, 1 },
{"sf2koryu", NOBATTRY, 0x8000, mapper_S9263B, 1 },
{"varth", CPS_B_04, 0x8000, mapper_VA24B }, /* CPSB test has been patched out (60=0008) */
{"varthr1", CPS_B_04, 0x8000, mapper_VA24B }, /* CPSB test has been patched out (60=0008) */
{"varthu", CPS_B_04, 0x8000, mapper_VA24B }, /* CPSB test has been patched out (60=0008) */
{"varthj", BATTRY_5, 0x8000, mapper_VA24B }, /* CPSB test has been patched out (72=0001) */
{"cworld2j", BATTRY_6, 0x8000, mapper_Q522B }, /* The 0x76 priority values are incorrect values */
{"wof", NOBATTRY, 0x8000, mapper_TK263B }, /* bootleg? */
{"wofa", NOBATTRY, 0x8000, mapper_TK263B }, /* bootleg? */
{"wofu", QSOUND_1, 0x8000, mapper_TK263B },
{"wofj", QSOUND_1, 0x8000, mapper_TK263B },
{"dino", QSOUND_2, 0x8000, mapper_CD63B }, /* layer enable never used */
{"dinou", QSOUND_2, 0x8000, mapper_CD63B }, /* layer enable never used */
{"dinoj", QSOUND_2, 0x8000, mapper_CD63B }, /* layer enable never used */
{"punisher", QSOUND_3, 0x8000, mapper_PS63B },
{"punishru", QSOUND_3, 0x8000, mapper_PS63B },
{"punishrj", QSOUND_3, 0x8000, mapper_PS63B },
{"slammast", QSOUND_4, 0x8000, mapper_MB63B },
{"slammasu", QSOUND_4, 0x8000, mapper_MB63B },
{"mbomberj", QSOUND_4, 0x8000, mapper_MB63B },
{"mbombrd", QSOUND_5, 0x8000, mapper_MB63B },
{"mbombrdj", QSOUND_5, 0x8000, mapper_MB63B },
{"sf2hf", NOBATTRY, 0x8000, mapper_S9263B },
{"sf2t", NOBATTRY, 0x8000, mapper_S9263B },
{"sf2tj", NOBATTRY, 0x8000, mapper_S9263B },
{"qad", BATTRY_7, 0x8000, mapper_QD22B }, /* TODO: layer enable */
{"qadj", NOBATTRY, 0x8000, mapper_qadj },
{"qtono2", NOBATTRY, 0x8000, mapper_qtono2 },
{"megaman", NOBATTRY, 0x8000, mapper_RCM63B },
{"rockmanj", NOBATTRY, 0x8000, mapper_RCM63B },
{"pnickj", NOBATTRY, 0x8000, mapper_pnickj },
{"pang3", NOBATTRY, 0x8000, mapper_pang3 }, /* EEPROM port is among the CPS registers (handled by DRIVER_INIT) */
{"pang3j", NOBATTRY, 0x8000, mapper_pang3 }, /* EEPROM port is among the CPS registers (handled by DRIVER_INIT) */
#ifdef MESS
{"sfzch", NOBATTRY, 0x8000, mapper_cps2 },
#endif
/* CPS2 games */
{"cps2", NOBATTRY, 0x8000, mapper_cps2 },
{0} /* End of table */
};
/* Public variables */
UINT16 *cps1_gfxram;
UINT16 *cps1_output;
size_t cps1_gfxram_size;
size_t cps1_output_size;
/* Offset of each palette entry */
#define cps1_palette_entries (32*6) /* Number colour schemes in palette */
static const int cps1_scroll_size =0x4000; /* scroll1, scroll2, scroll3 */
static const int cps1_obj_size =0x0800;
static const int cps1_other_size =0x0800;
static const int cps1_palette_align=0x0400; /* minimum alignment is a single palette page (512 colors). Verified on pcb. */
static const int cps1_palette_size=cps1_palette_entries*32; /* Size of palette RAM */
static UINT16 *cps1_scroll1;
static UINT16 *cps1_scroll2;
static UINT16 *cps1_scroll3;
static UINT16 *cps1_obj;
static UINT16 *cps1_buffered_obj;
UINT16 *cps1_other;
/* Working variables */
static int cps1_last_sprite_offset; /* Offset of the last sprite */
static int cps1_stars_enabled[2]; /* Layer enabled [Y/N] */
tilemap *cps1_bg_tilemap[3];
int cps1_scroll1x, cps1_scroll1y;
int cps1_scroll2x, cps1_scroll2y;
int cps1_scroll3x, cps1_scroll3y;
static int stars1x, stars1y, stars2x, stars2y;
/* Output ports */
#define CPS1_OBJ_BASE 0x00 /* Base address of objects */
#define CPS1_SCROLL1_BASE 0x02 /* Base address of scroll 1 */
#define CPS1_SCROLL2_BASE 0x04 /* Base address of scroll 2 */
#define CPS1_SCROLL3_BASE 0x06 /* Base address of scroll 3 */
#define CPS1_OTHER_BASE 0x08 /* Base address of other video */
#define CPS1_PALETTE_BASE 0x0a /* Base address of palette */
#define CPS1_SCROLL1_SCROLLX 0x0c /* Scroll 1 X */
#define CPS1_SCROLL1_SCROLLY 0x0e /* Scroll 1 Y */
#define CPS1_SCROLL2_SCROLLX 0x10 /* Scroll 2 X */
#define CPS1_SCROLL2_SCROLLY 0x12 /* Scroll 2 Y */
#define CPS1_SCROLL3_SCROLLX 0x14 /* Scroll 3 X */
#define CPS1_SCROLL3_SCROLLY 0x16 /* Scroll 3 Y */
#define CPS1_STARS1_SCROLLX 0x18 /* Stars 1 X */
#define CPS1_STARS1_SCROLLY 0x1a /* Stars 1 Y */
#define CPS1_STARS2_SCROLLX 0x1c /* Stars 2 X */
#define CPS1_STARS2_SCROLLY 0x1e /* Stars 2 Y */
#define CPS1_ROWSCROLL_OFFS 0x20 /* base of row scroll offsets in other RAM */
#define CPS1_VIDEOCONTROL 0x22 /* flip screen, rowscroll enable */
#define CPS1_SCROLL2_WIDTH 0x40
#define CPS1_SCROLL2_HEIGHT 0x40
/*
CPS1 VIDEO RENDERER
*/
/* first 0x4000 of gfx ROM are used, but 0x0000-0x1fff is == 0x2000-0x3fff */
static const int stars_rom_size = 0x2000;
/* PSL: CPS2 support */
static const int cps2_obj_size =0x2000;
UINT16 *cps2_objram1,*cps2_objram2;
UINT16 *cps2_output;
size_t cps2_output_size;
static UINT16 *cps2_buffered_obj;
static int pri_ctrl; /* Sprite layer priorities */
static int cps2_objram_bank;
static int cps2_last_sprite_offset; /* Offset of the last sprite */
#define CPS2_OBJ_BASE 0x00 /* Unknown (not base address of objects). Could be bass address of bank used when object swap bit set? */
#define CPS2_OBJ_UK1 0x02 /* Unknown (nearly always 0x807d, or 0x808e when screen flipped) */
#define CPS2_OBJ_PRI 0x04 /* Layers priorities */
#define CPS2_OBJ_UK2 0x06 /* Unknown (usually 0x0000, 0x1101 in ssf2, 0x0001 in 19XX) */
#define CPS2_OBJ_XOFFS 0x08 /* X offset (usually 0x0040) */
#define CPS2_OBJ_YOFFS 0x0a /* Y offset (always 0x0010) */
static int cps_version;
int cps1_scanline1;
int cps1_scanline2;
int cps1_scancalls;
static void cps1_build_palette(running_machine *machine, const UINT16* const palette_base);
static MACHINE_RESET( cps )
{
const char *gamename = machine->gamedrv->name;
const struct CPS1config *pCFG=&cps1_config_table[0];
while(pCFG->name)
{
if (strcmp(pCFG->name, gamename) == 0)
{
break;
}
pCFG++;
}
cps1_game_config=pCFG;
if (!cps1_game_config->name)
{
gamename="cps2";
pCFG=&cps1_config_table[0];
while(pCFG->name)
{
if (strcmp(pCFG->name, gamename) == 0)
{
break;
}
pCFG++;
}
cps1_game_config=pCFG;
}
if (strcmp(gamename, "sf2rb" )==0)
{
/* Patch out protection check */
UINT16 *rom = (UINT16 *)memory_region(REGION_CPU1);
rom[0xe5464/2] = 0x6012;
}
if (strcmp(gamename, "sf2rb2" )==0)
{
/* Patch out protection check */
UINT16 *rom = (UINT16 *)memory_region(REGION_CPU1);
rom[0xe5332/2] = 0x6014;
}
#if 0
if (strcmp(gamename, "sf2accp2" )==0)
{
/* Patch out a odd branch which would be incorrectly interpreted
by the cpu core as a 32-bit branch. This branch would make the
game crash (address error, since it would branch to an odd address)
if location 180ca6 (outside ROM space) isn't 0. Protection check? */
UINT16 *rom = (UINT16 *)memory_region(REGION_CPU1);
rom[0x11756/2] = 0x4e71;
}
else if (strcmp(gamename, "ghouls" )==0)
{
/* Patch out self-test... it takes forever */
UINT16 *rom = (UINT16 *)memory_region(REGION_CPU1);
rom[0x61964/2] = 0x4ef9;
rom[0x61966/2] = 0x0000;
rom[0x61968/2] = 0x0400;
}
#endif
}
int cps1_port(int offset)
{
return cps1_output[offset/2];
}
INLINE UINT16 *cps1_base(int offset,int boundary)
{
int base=cps1_port(offset)*256;
/*
The scroll RAM must start on a 0x4000 boundary.
Some games do not do this.
For example:
Captain commando - continue screen will not display
Muscle bomber games - will animate garbage during gameplay
Mask out the irrelevant bits.
*/
base &= ~(boundary-1);
return &cps1_gfxram[(base&0x3ffff)/2];
}
READ16_HANDLER( cps1_output_r )
{
if (VERBOSE && offset >= 0x18/2) logerror("PC %06x: read output port %02x\n",activecpu_get_pc(),offset*2);
/* Some games interrogate a couple of registers on bootup. */
/* These are CPS1 board B self test checks. They wander from game to */
/* game. */
if (offset && offset == cps1_game_config->cpsb_addr/2)
return cps1_game_config->cpsb_value;
/* some games use as a protection check the ability to do 16-bit multiplies */
/* with a 32-bit result, by writing the factors to two ports and reading the */
/* result from two other ports. */
if (offset && offset == cps1_game_config->mult_result_lo/2)
return (cps1_output[cps1_game_config->mult_factor1/2] *
cps1_output[cps1_game_config->mult_factor2/2]) & 0xffff;
if (offset && offset == cps1_game_config->mult_result_hi/2)
return (cps1_output[cps1_game_config->mult_factor1/2] *
cps1_output[cps1_game_config->mult_factor2/2]) >> 16;
return cps1_output[offset];
}
WRITE16_HANDLER( cps1_output_w )
{
data = COMBINE_DATA(&cps1_output[offset]);
/* To mark scanlines for raster effects */
if(offset == 0x52/2)
{
cps1_scanline2 = (data & 0x1ff);
}
if(offset == 0x50/2)
{
cps1_scanline1 = (data & 0x1ff);
}
#ifdef MAME_DEBUG
if (cps1_game_config->palette_control && offset == cps1_game_config->palette_control/2 && data != 0x3f)
logerror("palette_control = %04x",data);
#endif
if (VERBOSE)
{
if (offset > 0x22/2 &&
offset != cps1_game_config->layer_control/2 &&
offset != cps1_game_config->priority[0]/2 &&
offset != cps1_game_config->priority[1]/2 &&
offset != cps1_game_config->priority[2]/2 &&
offset != cps1_game_config->priority[3]/2 &&
offset != cps1_game_config->palette_control/2)
logerror("PC %06x: write %02x to output port %02x\n",activecpu_get_pc(),data,offset*2);
#ifdef MAME_DEBUG
if (cps1_game_config->priority[0] && offset == cps1_game_config->priority[0]/2 && data != 0x00)
popmessage("priority0 %04x",data);
#endif
}
/*
The main CPU writes the palette to gfxram, and the CPS-B custom copies it
to the real palette RAM, which is separated from gfxram.
This is done ONLY after the palette base register is written to. It is not
known what the exact timing should be, how long it should take and when it
should happen. We are assuming that the copy happens immediately, since it
fixes glitches in the ghouls intro, but it might happen at next vblank.
*/
if (offset == CPS1_PALETTE_BASE/2)
cps1_build_palette(machine, cps1_base(CPS1_PALETTE_BASE,cps1_palette_align));
}
INLINE int cps2_port(int offset)
{
return cps2_output[offset/2];
}
static void cps1_gfx_decode(void)
{
int size=memory_region_length(REGION_GFX1);
int i,j,gfxsize;
UINT8 *cps1_gfx = memory_region(REGION_GFX1);
gfxsize=size/4;
for (i = 0;i < gfxsize;i++)
{
UINT32 src = cps1_gfx[4*i] + (cps1_gfx[4*i+1]<<8) + (cps1_gfx[4*i+2]<<16) + (cps1_gfx[4*i+3]<<24);
UINT32 dwval = 0;
for (j = 0;j < 8;j++)
{
int n = 0;
UINT32 mask = (0x80808080 >> j) & src;
if (mask & 0x000000ff) n |= 1;
if (mask & 0x0000ff00) n |= 2;
if (mask & 0x00ff0000) n |= 4;
if (mask & 0xff000000) n |= 8;
dwval |= n << (j * 4);
}
cps1_gfx[4*i ] = dwval>>0;
cps1_gfx[4*i+1] = dwval>>8;
cps1_gfx[4*i+2] = dwval>>16;
cps1_gfx[4*i+3] = dwval>>24;
}
}
static void unshuffle(UINT64 *buf,int len)
{
int i;
UINT64 t;
if (len == 2) return;
assert(len % 4 == 0); /* must not happen */
len /= 2;
unshuffle(buf,len);
unshuffle(buf + len,len);
for (i = 0;i < len/2;i++)
{
t = buf[len/2 + i];
buf[len/2 + i] = buf[len + i];
buf[len + i] = t;
}
}
static void cps2_gfx_decode(void)
{
const int banksize=0x200000;
int size=memory_region_length(REGION_GFX1);
int i;
for (i = 0;i < size;i += banksize)
unshuffle((UINT64 *)(memory_region(REGION_GFX1) + i),banksize/8);
cps1_gfx_decode();
}
DRIVER_INIT( cps1 )
{
cps1_gfx_decode();
}
DRIVER_INIT( cps2_video )
{
cps2_gfx_decode();
cps1_scanline1 = 262;
cps1_scanline2 = 262;
cps1_scancalls = 0;
}
void cps1_get_video_base(void )
{
int layercontrol, videocontrol, scroll1xoff, scroll2xoff, scroll3xoff;
/* Re-calculate the VIDEO RAM base */
if (cps1_scroll1 != cps1_base(CPS1_SCROLL1_BASE,cps1_scroll_size))
{
cps1_scroll1 = cps1_base(CPS1_SCROLL1_BASE,cps1_scroll_size);
tilemap_mark_all_tiles_dirty(cps1_bg_tilemap[0]);
}
if (cps1_scroll2 != cps1_base(CPS1_SCROLL2_BASE,cps1_scroll_size))
{
cps1_scroll2 = cps1_base(CPS1_SCROLL2_BASE,cps1_scroll_size);
tilemap_mark_all_tiles_dirty(cps1_bg_tilemap[1]);
}
if (cps1_scroll3 != cps1_base(CPS1_SCROLL3_BASE,cps1_scroll_size))
{
cps1_scroll3 = cps1_base(CPS1_SCROLL3_BASE,cps1_scroll_size);
tilemap_mark_all_tiles_dirty(cps1_bg_tilemap[2]);
}
/* Some of the sf2 hacks use only sprite port 0x9100 and the scroll layers are offset */
if (cps1_game_config->bootleg_kludge == 1)
{
cps1_output[CPS1_OBJ_BASE/2] = 0x9100;
cps1_obj=cps1_base(CPS1_OBJ_BASE, cps1_obj_size);
scroll1xoff = -0x0c;
scroll2xoff = -0x0e;
scroll3xoff = -0x10;
}
else
{
cps1_obj=cps1_base(CPS1_OBJ_BASE, cps1_obj_size);
scroll1xoff = 0;
scroll2xoff = 0;
scroll3xoff = 0;
}
cps1_other=cps1_base(CPS1_OTHER_BASE,cps1_other_size);
/* Get scroll values */
cps1_scroll1x=cps1_port(CPS1_SCROLL1_SCROLLX) + scroll1xoff;
cps1_scroll1y=cps1_port(CPS1_SCROLL1_SCROLLY);
cps1_scroll2x=cps1_port(CPS1_SCROLL2_SCROLLX) + scroll2xoff;
cps1_scroll2y=cps1_port(CPS1_SCROLL2_SCROLLY);
cps1_scroll3x=cps1_port(CPS1_SCROLL3_SCROLLX) + scroll3xoff;
cps1_scroll3y=cps1_port(CPS1_SCROLL3_SCROLLY);
stars1x =cps1_port(CPS1_STARS1_SCROLLX);
stars1y =cps1_port(CPS1_STARS1_SCROLLY);
stars2x =cps1_port(CPS1_STARS2_SCROLLX);
stars2y =cps1_port(CPS1_STARS2_SCROLLY);
/* Get layer enable bits */
layercontrol=cps1_port(cps1_game_config->layer_control);
videocontrol=cps1_port(CPS1_VIDEOCONTROL);
tilemap_set_enable(cps1_bg_tilemap[0],layercontrol & cps1_game_config->layer_enable_mask[0]);
tilemap_set_enable(cps1_bg_tilemap[1],(layercontrol & cps1_game_config->layer_enable_mask[1]) && (videocontrol & 4));
tilemap_set_enable(cps1_bg_tilemap[2],(layercontrol & cps1_game_config->layer_enable_mask[2]) && (videocontrol & 8));
cps1_stars_enabled[0] = layercontrol & cps1_game_config->layer_enable_mask[3];
cps1_stars_enabled[1] = layercontrol & cps1_game_config->layer_enable_mask[4];
#ifdef MAME_DEBUG
{
int enablemask;
#if 0
if (input_code_pressed(KEYCODE_Z))
{
if (input_code_pressed(KEYCODE_Q)) cps1_layer_enabled[3]=0;
if (input_code_pressed(KEYCODE_W)) cps1_layer_enabled[2]=0;
if (input_code_pressed(KEYCODE_E)) cps1_layer_enabled[1]=0;
if (input_code_pressed(KEYCODE_R)) cps1_layer_enabled[0]=0;
if (input_code_pressed(KEYCODE_T))
{
popmessage("%d %d %d %d layer %02x",
(layercontrol>>0x06)&03,
(layercontrol>>0x08)&03,
(layercontrol>>0x0a)&03,
(layercontrol>>0x0c)&03,
layercontrol&0xc03f
);
}
}
#endif
enablemask = 0;
if (cps1_game_config->layer_enable_mask[0] == cps1_game_config->layer_enable_mask[1])
enablemask = cps1_game_config->layer_enable_mask[0];
if (cps1_game_config->layer_enable_mask[0] == cps1_game_config->layer_enable_mask[2])
enablemask = cps1_game_config->layer_enable_mask[0];
if (cps1_game_config->layer_enable_mask[1] == cps1_game_config->layer_enable_mask[2])
enablemask = cps1_game_config->layer_enable_mask[1];
if (enablemask)
{
if (((layercontrol & enablemask) && (layercontrol & enablemask) != enablemask))
popmessage("layer %02x",layercontrol&0xc03f);
}
}
#endif
{
int enablemask;
enablemask = cps1_game_config->layer_enable_mask[0] | cps1_game_config->layer_enable_mask[1]
| cps1_game_config->layer_enable_mask[2]
| cps1_game_config->layer_enable_mask[3] | cps1_game_config->layer_enable_mask[4];
if (((layercontrol & ~enablemask) & 0xc03e) != 0)
popmessage("layer %02x contact MAMEDEV",layercontrol&0xc03f);
}
}
WRITE16_HANDLER( cps1_gfxram_w )
{
int page = (offset >> 7) & 0x3c0;
COMBINE_DATA(&cps1_gfxram[offset]);
if (page == (cps1_port(CPS1_SCROLL1_BASE) & 0x3c0))
tilemap_mark_tile_dirty(cps1_bg_tilemap[0],offset/2 & 0x0fff);
if (page == (cps1_port(CPS1_SCROLL2_BASE) & 0x3c0))
tilemap_mark_tile_dirty(cps1_bg_tilemap[1],offset/2 & 0x0fff);
if (page == (cps1_port(CPS1_SCROLL3_BASE) & 0x3c0))
tilemap_mark_tile_dirty(cps1_bg_tilemap[2],offset/2 & 0x0fff);
}
static int gfxrom_bank_mapper(running_machine *machine, int type, int code)
{
const struct gfx_range *range = cps1_game_config->bank_mapper;
int shift = 0;
assert(range);
switch (type)
{
case GFXTYPE_SPRITES: shift = 1; break;
case GFXTYPE_SCROLL1: shift = 0; break;
case GFXTYPE_SCROLL2: shift = 1; break;
case GFXTYPE_SCROLL3: shift = 3; break;
}
code <<= shift;
while (range->type)
{
if (code >= range->start && code <= range->end)
{
if (range->type & type)
{
return ((code & (cps1_game_config->bank_size - 1)) + (range->bank * cps1_game_config->bank_size)) >> shift;
}
}
++range;
}
#ifdef MAME_DEBUG
// popmessage("tile %02x/%04x out of range", type,code>>shift);
#endif
return -1;
}
/***************************************************************************
Start the video hardware emulation.
***************************************************************************/
static TILEMAP_MAPPER( tilemap0_scan )
{
/* logical (col,row) -> memory offset */
return (row & 0x1f) + ((col & 0x3f) << 5) + ((row & 0x20) << 6);
}
static TILEMAP_MAPPER( tilemap1_scan )
{
/* logical (col,row) -> memory offset */
return (row & 0x0f) + ((col & 0x3f) << 4) + ((row & 0x30) << 6);
}
static TILEMAP_MAPPER( tilemap2_scan )
{
/* logical (col,row) -> memory offset */
return (row & 0x07) + ((col & 0x3f) << 3) + ((row & 0x38) << 6);
}
static UINT8 empty_tile[32*32/2];
static TILE_GET_INFO( get_tile0_info )
{
int code = cps1_scroll1[2*tile_index];
int attr = cps1_scroll1[2*tile_index+1];
int gfxset;
code = gfxrom_bank_mapper(machine, GFXTYPE_SCROLL1, code);
/* allows us to reproduce a problem seen with a ffight board where USA and Japanese
roms have been mixed to be reproduced (ffightua) -- it looks like each column
should alternate between the left and right side of the 16x16 tiles */
gfxset = (tile_index & 0x20) >> 5;
SET_TILE_INFO(
gfxset,
code,
(attr & 0x1f) + 0x20,
TILE_FLIPYX((attr & 0x60) >> 5));
tileinfo->group = (attr & 0x0180) >> 7;
// for out of range tiles, switch to fully transparent data
// (but still call SET_TILE_INFO, otherwise problems might occur on boot e.g. unsquad)
if (code == -1)
tileinfo->pen_data = empty_tile;
}
static TILE_GET_INFO( get_tile1_info )
{
int code = cps1_scroll2[2*tile_index];
int attr = cps1_scroll2[2*tile_index+1];
code = gfxrom_bank_mapper(machine, GFXTYPE_SCROLL2, code);
SET_TILE_INFO(
2,
code,
(attr & 0x1f) + 0x40,
TILE_FLIPYX((attr & 0x60) >> 5));
tileinfo->group = (attr & 0x0180) >> 7;
// for out of range tiles, switch to fully transparent data
if (code == -1)
tileinfo->pen_data = empty_tile;
}
static TILE_GET_INFO( get_tile2_info )
{
int code = cps1_scroll3[2*tile_index] & 0x3fff;
int attr = cps1_scroll3[2*tile_index+1];
code = gfxrom_bank_mapper(machine, GFXTYPE_SCROLL3, code);
SET_TILE_INFO(
3,
code,
(attr & 0x1f) + 0x60,
TILE_FLIPYX((attr & 0x60) >> 5));
tileinfo->group = (attr & 0x0180) >> 7;
// for out of range tiles, switch to fully transparent data
// (but still call SET_TILE_INFO, otherwise problems might occur on boot e.g. unsquad)
if (code == -1)
tileinfo->pen_data = empty_tile;
}
static void cps1_update_transmasks(void)
{
int i;
for (i = 0;i < 4;i++)
{
int mask;
/* Get transparency registers */
if (cps1_game_config->priority[i])
mask = cps1_port(cps1_game_config->priority[i]) ^ 0xffff;
else mask = 0xffff; /* completely transparent if priority masks not defined (mercs, qad) */
tilemap_set_transmask(cps1_bg_tilemap[0],i,mask,0x8000);
tilemap_set_transmask(cps1_bg_tilemap[1],i,mask,0x8000);
tilemap_set_transmask(cps1_bg_tilemap[2],i,mask,0x8000);
}
}
static VIDEO_START( cps )
{
int i;
MACHINE_RESET_CALL(cps);
cps1_bg_tilemap[0] = tilemap_create(get_tile0_info,tilemap0_scan, 8, 8,64,64);
cps1_bg_tilemap[1] = tilemap_create(get_tile1_info,tilemap1_scan,16,16,64,64);
cps1_bg_tilemap[2] = tilemap_create(get_tile2_info,tilemap2_scan,32,32,64,64);
/* front masks will change at runtime to handle sprite occluding */
cps1_update_transmasks();
memset(empty_tile,0xff,sizeof(empty_tile));
for (i = 0;i < cps1_palette_entries*16;i++)
{
palette_set_color(machine,i,MAKE_RGB(0,0,0));
}
cps1_buffered_obj = auto_malloc (cps1_obj_size);
memset(cps1_buffered_obj, 0x00, cps1_obj_size);
if (cps_version==2)
{
cps2_buffered_obj = auto_malloc (cps2_obj_size);
memset(cps2_buffered_obj, 0x00, cps2_obj_size);
}
memset(cps1_gfxram, 0, cps1_gfxram_size); /* Clear GFX RAM */
memset(cps1_output, 0, cps1_output_size); /* Clear output ports */
if (cps_version == 2)
{
memset(cps2_objram1, 0, cps2_obj_size);
memset(cps2_objram2, 0, cps2_obj_size);
}
/* Put in some defaults */
cps1_output[CPS1_OBJ_BASE/2] = 0x9200;
cps1_output[CPS1_SCROLL1_BASE/2] = 0x9000;
cps1_output[CPS1_SCROLL2_BASE/2] = 0x9040;
cps1_output[CPS1_SCROLL3_BASE/2] = 0x9080;
cps1_output[CPS1_OTHER_BASE/2] = 0x9100;
assert_always(cps1_game_config, "cps1_game_config hasn't been set up yet");
/* Set up old base */
cps1_get_video_base(); /* Calculate base pointers */
cps1_get_video_base(); /* Calculate old base pointers */
}
VIDEO_START( cps1 )
{
cps_version=1;
VIDEO_START_CALL(cps);
}
VIDEO_START( cps2 )
{
cps_version=2;
VIDEO_START_CALL(cps);
}
/***************************************************************************
Build palette from palette RAM
12 bit RGB with a 4 bit brightness value.
***************************************************************************/
static void cps1_build_palette(running_machine *machine, const UINT16* const palette_base)
{
int offset, page;
const UINT16 *palette_ram = palette_base;
int ctrl = cps1_port(cps1_game_config->palette_control);
/*
The palette is copied only for pages that are enabled in the ctrl
register. Note that if the sprite palette (page 0) is skipped, the
all the following pages are scaled down by one.
*/
for (page = 0; page < 6; ++page)
{
if (BIT(ctrl,page))
{
for (offset = 0; offset < 0x200; ++offset)
{
int palette = *(palette_ram++);
int r, g, b, bright;
// from my understanding of the schematics, when the 'brightness'
// component is set to 0 it should reduce brightness to 1/3
bright = 0x0f + ((palette>>12)<<1);
r = ((palette>>8)&0x0f) * 0x11 * bright / 0x2d;
g = ((palette>>4)&0x0f) * 0x11 * bright / 0x2d;
b = ((palette>>0)&0x0f) * 0x11 * bright / 0x2d;
palette_set_color (machine, 0x200*page + offset, MAKE_RGB(r, g, b));
}
}
else
{
if (page > 0)
palette_ram += 0x200;
}
}
}
/***************************************************************************
Sprites
=======
Sprites are represented by a number of 8 byte values
xx xx yy yy nn nn aa aa
where xxxx = x position
yyyy = y position
nnnn = tile number
aaaa = attribute word
0x0001 colour
0x0002 colour
0x0004 colour
0x0008 colour
0x0010 colour
0x0020 X Flip
0x0040 Y Flip
0x0080 X & Y offset toggle (used in Marvel vs. Capcom.)
0x0100 X block size (in sprites)
0x0200 X block size
0x0400 X block size
0x0800 X block size
0x1000 Y block size (in sprites)
0x2000 Y block size
0x4000 Y block size
0x8000 Y block size
The end of the table (may) be marked by an attribute value of 0xff00.
***************************************************************************/
static void cps1_find_last_sprite(void) /* Find the offset of last sprite */
{
int offset=0;
/* Locate the end of table marker */
while (offset < cps1_obj_size/2)
{
int colour=cps1_buffered_obj[offset+3];
if ((colour & 0xff00) == 0xff00)
{
/* Marker found. This is the last sprite. */
cps1_last_sprite_offset=offset-4;
return;
}
offset+=4;
}
/* Sprites must use full sprite RAM */
cps1_last_sprite_offset=cps1_obj_size/2-4;
}
static void cps1_render_sprites(running_machine *machine, bitmap_t *bitmap, const rectangle *cliprect)
{
#define DRAWSPRITE(CODE,COLOR,FLIPX,FLIPY,SX,SY) \
{ \
if (flip_screen_get()) \
pdrawgfx(bitmap,machine->gfx[2], \
CODE, \
COLOR, \
!(FLIPX),!(FLIPY), \
511-16-(SX),255-16-(SY), \
cliprect,TRANSPARENCY_PEN,15,0x02); \
else \
pdrawgfx(bitmap,machine->gfx[2], \
CODE, \
COLOR, \
FLIPX,FLIPY, \
SX,SY, \
cliprect,TRANSPARENCY_PEN,15,0x02); \
}
int i, baseadd;
UINT16 *base=cps1_buffered_obj;
/* some sf2 hacks draw the sprites in reverse order */
if (cps1_game_config->bootleg_kludge == 1)
{
base += cps1_last_sprite_offset;
baseadd = -4;
}
else
{
baseadd = 4;
}
for (i=cps1_last_sprite_offset; i>=0; i-=4)
{
int x=*(base+0);
int y=*(base+1);
int code =*(base+2);
int colour=*(base+3);
int col=colour&0x1f;
// x-=0x20;
// y+=0x20;
code = gfxrom_bank_mapper(machine, GFXTYPE_SPRITES, code);
if (code != -1)
{
if (colour & 0xff00 )
{
/* handle blocked sprites */
int nx=(colour & 0x0f00) >> 8;
int ny=(colour & 0xf000) >> 12;
int nxs,nys,sx,sy;
nx++;
ny++;
if (colour & 0x40)
{
/* Y flip */
if (colour &0x20)
{
for (nys=0; nys<ny; nys++)
{
for (nxs=0; nxs<nx; nxs++)
{
sx = (x+nxs*16) & 0x1ff;
sy = (y+nys*16) & 0x1ff;
DRAWSPRITE(
// code+(nx-1)-nxs+0x10*(ny-1-nys),
(code & ~0xf) + ((code + (nx-1) - nxs) & 0xf) + 0x10*(ny-1-nys),
(col&0x1f),
1,1,
sx,sy);
}
}
}
else
{
for (nys=0; nys<ny; nys++)
{
for (nxs=0; nxs<nx; nxs++)
{
sx = (x+nxs*16) & 0x1ff;
sy = (y+nys*16) & 0x1ff;
DRAWSPRITE(
// code+nxs+0x10*(ny-1-nys),
(code & ~0xf) + ((code + nxs) & 0xf) + 0x10*(ny-1-nys),
(col&0x1f),
0,1,
sx,sy);
}
}
}
}
else
{
if (colour &0x20)
{
for (nys=0; nys<ny; nys++)
{
for (nxs=0; nxs<nx; nxs++)
{
sx = (x+nxs*16) & 0x1ff;
sy = (y+nys*16) & 0x1ff;
DRAWSPRITE(
// code+(nx-1)-nxs+0x10*nys,
(code & ~0xf) + ((code + (nx-1) - nxs) & 0xf) + 0x10*nys,
(col&0x1f),
1,0,
sx,sy);
}
}
}
else
{
for (nys=0; nys<ny; nys++)
{
for (nxs=0; nxs<nx; nxs++)
{
sx = (x+nxs*16) & 0x1ff;
sy = (y+nys*16) & 0x1ff;
DRAWSPRITE(
// code+nxs+0x10*nys,
(code & ~0xf) + ((code + nxs) & 0xf) + 0x10*nys, // fix 00406: qadj: When playing as the ninja, there is one broekn frame in his animation loop when walking.
(col&0x1f),
0,0,
sx,sy);
}
}
}
}
}
else
{
/* Simple case... 1 sprite */
DRAWSPRITE(
code,
(col&0x1f),
colour&0x20,colour&0x40,
x & 0x1ff,y & 0x1ff);
}
}
base += baseadd;
}
#undef DRAWSPRITE
}
WRITE16_HANDLER( cps2_objram_bank_w )
{
if (ACCESSING_BITS_0_7)
{
cps2_objram_bank = data & 1;
}
}
READ16_HANDLER( cps2_objram1_r )
{
if (cps2_objram_bank & 1)
return cps2_objram2[offset];
else
return cps2_objram1[offset];
}
READ16_HANDLER( cps2_objram2_r )
{
if (cps2_objram_bank & 1)
return cps2_objram1[offset];
else
return cps2_objram2[offset];
}
WRITE16_HANDLER( cps2_objram1_w )
{
if (cps2_objram_bank & 1)
COMBINE_DATA(&cps2_objram2[offset]);
else
COMBINE_DATA(&cps2_objram1[offset]);
}
WRITE16_HANDLER( cps2_objram2_w )
{
if (cps2_objram_bank & 1)
COMBINE_DATA(&cps2_objram1[offset]);
else
COMBINE_DATA(&cps2_objram2[offset]);
}
static UINT16 *cps2_objbase(void)
{
int baseptr;
baseptr = 0x7000;
if (cps2_objram_bank & 1) baseptr ^= 0x0080;
//popmessage("%04x %d",cps2_port(CPS2_OBJ_BASE),cps2_objram_bank&1);
if (baseptr == 0x7000)
return cps2_objram1;
else //if (baseptr == 0x7080)
return cps2_objram2;
}
static void cps2_find_last_sprite(void) /* Find the offset of last sprite */
{
int offset=0;
UINT16 *base=cps2_buffered_obj;
/* Locate the end of table marker */
while (offset < cps2_obj_size/2)
{
if (base[offset+1]>=0x8000
|| base[offset+3]>=0xff00)
{
/* Marker found. This is the last sprite. */
cps2_last_sprite_offset=offset-4;
return;
}
offset+=4;
}
/* Sprites must use full sprite RAM */
cps2_last_sprite_offset=cps2_obj_size/2-4;
#undef DRAWSPRITE
}
static void cps2_render_sprites(running_machine *machine, bitmap_t *bitmap,const rectangle *cliprect,int *primasks)
{
#define DRAWSPRITE(CODE,COLOR,FLIPX,FLIPY,SX,SY) \
{ \
if (flip_screen_get()) \
pdrawgfx(bitmap,machine->gfx[2], \
CODE, \
COLOR, \
!(FLIPX),!(FLIPY), \
511-16-(SX),255-16-(SY), \
cliprect,TRANSPARENCY_PEN,15,primasks[priority]); \
else \
pdrawgfx(bitmap,machine->gfx[2], \
CODE, \
COLOR, \
FLIPX,FLIPY, \
SX,SY, \
cliprect,TRANSPARENCY_PEN,15,primasks[priority]); \
}
int i;
UINT16 *base=cps2_buffered_obj;
int xoffs = 64-cps2_port(CPS2_OBJ_XOFFS);
int yoffs = 16-cps2_port(CPS2_OBJ_YOFFS);
#ifdef MAME_DEBUG
if (input_code_pressed(KEYCODE_Z) && input_code_pressed(KEYCODE_R))
{
return;
}
#endif
for (i=cps2_last_sprite_offset; i>=0; i-=4)
{
int x=base[i+0];
int y=base[i+1];
int priority=(x>>13)&0x07;
int code = base[i+2]+((y & 0x6000) <<3);
int colour= base[i+3];
int col=colour&0x1f;
if(colour & 0x80)
{
x += cps2_port(CPS2_OBJ_XOFFS); /* fix the offset of some games */
y += cps2_port(CPS2_OBJ_YOFFS); /* like Marvel vs. Capcom ending credits */
}
if (colour & 0xff00 )
{
/* handle blocked sprites */
int nx=(colour & 0x0f00) >> 8;
int ny=(colour & 0xf000) >> 12;
int nxs,nys,sx,sy;
nx++;
ny++;
if (colour & 0x40)
{
/* Y flip */
if (colour &0x20)
{
for (nys=0; nys<ny; nys++)
{
for (nxs=0; nxs<nx; nxs++)
{
sx = (x+nxs*16+xoffs) & 0x3ff;
sy = (y+nys*16+yoffs) & 0x3ff;
DRAWSPRITE(
code+(nx-1)-nxs+0x10*(ny-1-nys),
(col&0x1f),
1,1,
sx,sy);
}
}
}
else
{
for (nys=0; nys<ny; nys++)
{
for (nxs=0; nxs<nx; nxs++)
{
sx = (x+nxs*16+xoffs) & 0x3ff;
sy = (y+nys*16+yoffs) & 0x3ff;
DRAWSPRITE(
code+nxs+0x10*(ny-1-nys),
(col&0x1f),
0,1,
sx,sy);
}
}
}
}
else
{
if (colour &0x20)
{
for (nys=0; nys<ny; nys++)
{
for (nxs=0; nxs<nx; nxs++)
{
sx = (x+nxs*16+xoffs) & 0x3ff;
sy = (y+nys*16+yoffs) & 0x3ff;
DRAWSPRITE(
code+(nx-1)-nxs+0x10*nys,
(col&0x1f),
1,0,
sx,sy);
}
}
}
else
{
for (nys=0; nys<ny; nys++)
{
for (nxs=0; nxs<nx; nxs++)
{
sx = (x+nxs*16+xoffs) & 0x3ff;
sy = (y+nys*16+yoffs) & 0x3ff;
DRAWSPRITE(
// code+nxs+0x10*nys,
(code & ~0xf) + ((code + nxs) & 0xf) + 0x10*nys, // pgear fix
(col&0x1f),
0,0,
sx,sy);
}
}
}
}
}
else
{
/* Simple case... 1 sprite */
DRAWSPRITE(
code,
(col&0x1f),
colour&0x20,colour&0x40,
(x+xoffs) & 0x3ff,(y+yoffs) & 0x3ff);
}
}
}
static void cps1_render_stars(const device_config *screen, bitmap_t *bitmap,const rectangle *cliprect)
{
int offs;
UINT8 *stars_rom = memory_region(REGION_GFX2);
if (!stars_rom && (cps1_stars_enabled[0] || cps1_stars_enabled[1]))
{
#ifdef MAME_DEBUG
popmessage("stars enabled but no stars ROM");
#endif
return;
}
if (cps1_stars_enabled[0])
{
for (offs = 0;offs < stars_rom_size/2;offs++)
{
int col = stars_rom[8*offs+4];
if (col != 0x0f)
{
int sx = (offs / 256) * 32;
int sy = (offs % 256);
sx = (sx - stars2x + (col & 0x1f)) & 0x1ff;
sy = (sy - stars2y) & 0xff;
if (flip_screen_get())
{
sx = 511 - sx;
sy = 255 - sy;
}
col = ((col & 0xe0) >> 1) + (video_screen_get_frame_number(screen)/16 & 0x0f);
if (sx >= cliprect->min_x && sx <= cliprect->max_x &&
sy >= cliprect->min_y && sy <= cliprect->max_y)
*BITMAP_ADDR16(bitmap, sy, sx) = 0xa00 + col;
}
}
}
if (cps1_stars_enabled[1])
{
for (offs = 0;offs < stars_rom_size/2;offs++)
{
int col = stars_rom[8*offs];
if (col != 0x0f)
{
int sx = (offs / 256) * 32;
int sy = (offs % 256);
sx = (sx - stars1x + (col & 0x1f)) & 0x1ff;
sy = (sy - stars1y) & 0xff;
if (flip_screen_get())
{
sx = 511 - sx;
sy = 255 - sy;
}
col = ((col & 0xe0) >> 1) + (video_screen_get_frame_number(screen)/16 & 0x0f);
if (sx >= cliprect->min_x && sx <= cliprect->max_x &&
sy >= cliprect->min_y && sy <= cliprect->max_y)
*BITMAP_ADDR16(bitmap, sy, sx) = 0x800 + col;
}
}
}
}
static void cps1_render_layer(running_machine *machine,bitmap_t *bitmap,const rectangle *cliprect,int layer,int primask)
{
switch (layer)
{
case 0:
cps1_render_sprites(machine,bitmap,cliprect);
break;
case 1:
case 2:
case 3:
tilemap_draw(bitmap,cliprect,cps1_bg_tilemap[layer-1],TILEMAP_DRAW_LAYER1,primask);
break;
}
}
static void cps1_render_high_layer(bitmap_t *bitmap, const rectangle *cliprect, int layer)
{
switch (layer)
{
case 0:
/* there are no high priority sprites */
break;
case 1:
case 2:
case 3:
tilemap_draw(NULL,cliprect,cps1_bg_tilemap[layer-1],TILEMAP_DRAW_LAYER0,1);
break;
}
}
/***************************************************************************
Refresh screen
***************************************************************************/
VIDEO_UPDATE( cps1 )
{
int layercontrol,l0,l1,l2,l3;
int videocontrol=cps1_port(CPS1_VIDEOCONTROL);
flip_screen_set(videocontrol & 0x8000);
layercontrol = cps1_output[cps1_game_config->layer_control/2];
/* Get video memory base registers */
cps1_get_video_base();
/* Find the offset of the last sprite in the sprite table */
cps1_find_last_sprite();
if (cps_version == 2)
{
cps2_find_last_sprite();
}
cps1_update_transmasks();
tilemap_set_scrollx(cps1_bg_tilemap[0],0,cps1_scroll1x);
tilemap_set_scrolly(cps1_bg_tilemap[0],0,cps1_scroll1y);
if (videocontrol & 0x01) /* linescroll enable */
{
int scrly=-cps1_scroll2y;
int i;
int otheroffs;
tilemap_set_scroll_rows(cps1_bg_tilemap[1],1024);
otheroffs = cps1_port(CPS1_ROWSCROLL_OFFS);
for (i = 0;i < 256;i++)
tilemap_set_scrollx(cps1_bg_tilemap[1],(i - scrly) & 0x3ff,cps1_scroll2x + cps1_other[(i + otheroffs) & 0x3ff]);
}
else
{
tilemap_set_scroll_rows(cps1_bg_tilemap[1],1);
tilemap_set_scrollx(cps1_bg_tilemap[1],0,cps1_scroll2x);
}
tilemap_set_scrolly(cps1_bg_tilemap[1],0,cps1_scroll2y);
tilemap_set_scrollx(cps1_bg_tilemap[2],0,cps1_scroll3x);
tilemap_set_scrolly(cps1_bg_tilemap[2],0,cps1_scroll3y);
/* Blank screen */
fillbitmap(bitmap,0xbff,cliprect);
cps1_render_stars(screen, bitmap,cliprect);
/* Draw layers (0 = sprites, 1-3 = tilemaps) */
l0 = (layercontrol >> 0x06) & 03;
l1 = (layercontrol >> 0x08) & 03;
l2 = (layercontrol >> 0x0a) & 03;
l3 = (layercontrol >> 0x0c) & 03;
fillbitmap(priority_bitmap,0,cliprect);
if (cps_version == 1)
{
cps1_render_layer(screen->machine,bitmap,cliprect,l0,0);
if (l1 == 0) cps1_render_high_layer(bitmap,cliprect,l0); /* prepare mask for sprites */
cps1_render_layer(screen->machine,bitmap,cliprect,l1,0);
if (l2 == 0) cps1_render_high_layer(bitmap,cliprect,l1); /* prepare mask for sprites */
cps1_render_layer(screen->machine,bitmap,cliprect,l2,0);
if (l3 == 0) cps1_render_high_layer(bitmap,cliprect,l2); /* prepare mask for sprites */
cps1_render_layer(screen->machine,bitmap,cliprect,l3,0);
}
else
{
int l0pri,l1pri,l2pri,l3pri;
int primasks[8],i;
l0pri = (pri_ctrl >> 4*l0) & 0x0f;
l1pri = (pri_ctrl >> 4*l1) & 0x0f;
l2pri = (pri_ctrl >> 4*l2) & 0x0f;
l3pri = (pri_ctrl >> 4*l3) & 0x0f;
#if 0
if ( (cps2_port(CPS2_OBJ_BASE) != 0x7080 && cps2_port(CPS2_OBJ_BASE) != 0x7000) ||
cps2_port(CPS2_OBJ_UK1) != 0x807d ||
(cps2_port(CPS2_OBJ_UK2) != 0x0000 && cps2_port(CPS2_OBJ_UK2) != 0x1101 && cps2_port(CPS2_OBJ_UK2) != 0x0001) ||
popmessage("base %04x uk1 %04x uk2 %04x",
cps2_port(CPS2_OBJ_BASE),
cps2_port(CPS2_OBJ_UK1),
cps2_port(CPS2_OBJ_UK2));
if (0 && input_code_pressed(KEYCODE_Z))
popmessage("order: %d (%d) %d (%d) %d (%d) %d (%d)",l0,l0pri,l1,l1pri,l2,l2pri,l3,l3pri);
#endif
/* take out the CPS1 sprites layer */
if (l0 == 0) { l0 = l1; l1 = 0; l0pri = l1pri; }
if (l1 == 0) { l1 = l2; l2 = 0; l1pri = l2pri; }
if (l2 == 0) { l2 = l3; l3 = 0; l2pri = l3pri; }
{
int mask0 = 0xaa;
int mask1 = 0xcc;
if(l0pri>l1pri) mask0 &= ~0x88;
if(l0pri>l2pri) mask0 &= ~0xa0;
if(l1pri>l2pri) mask1 &= ~0xc0;
primasks[0] = 0xff;
for (i = 1;i < 8;i++)
{
if (i <= l0pri && i <= l1pri && i <= l2pri)
{
primasks[i] = 0xfe;
continue;
}
primasks[i] = 0;
if (i <= l0pri) primasks[i] |= mask0;
if (i <= l1pri) primasks[i] |= mask1;
if (i <= l2pri) primasks[i] |= 0xf0;
}
}
cps1_render_layer(screen->machine,bitmap,cliprect,l0,1);
cps1_render_layer(screen->machine,bitmap,cliprect,l1,2);
cps1_render_layer(screen->machine,bitmap,cliprect,l2,4);
cps2_render_sprites(screen->machine,bitmap,cliprect,primasks);
}
return 0;
}
VIDEO_EOF( cps1 )
{
/* Get video memory base registers */
cps1_get_video_base();
if (cps_version == 1)
{
/* CPS1 sprites have to be delayed one frame */
memcpy(cps1_buffered_obj, cps1_obj, cps1_obj_size);
}
}
void cps2_set_sprite_priorities(void)
{
pri_ctrl = cps2_port(CPS2_OBJ_PRI);
}
void cps2_objram_latch(void)
{
cps2_set_sprite_priorities();
memcpy(cps2_buffered_obj, cps2_objbase(), cps2_obj_size);
}