/***************************************************************************
-= Jaleco Driving Games =-
driver by Luca Elia (l.elia@tin.it)
Note: if MAME_DEBUG is defined, pressing Z or X with:
Q,W,E shows scroll 0,1,2
R,T shows road 0,1
A,S,D,F shows sprites with priority 0,1,2,3
X shows some info on each sprite
M disables sprites zooming
U toggles the display of some hardware registers'
values ($80000/2/4/6)
Keys can be used together!
Additionally, layers can be disabled, writing to $82400
(fake video register):
---- ---- --54 ---- Enable Road 1,0
---- ---- ---- 3--- Enable Sprites
---- ---- ---- -210 Enable Scroll 2,1,0
0 is the same as 0x3f
[ 3 Scrolling Layers ]
see Megasys1.c
Tile Format: Cisco Heat F1 GP Star
Colour fedc b--- ---- ---- fedc ---- ---- ----
Code ---- -a98 7654 3210 ---- ba98 7654 3210
Layer Size: May be different from Megasys1?
[ 2 Road Layers ]
Each of the 256 (not all visible) lines of the screen
can display any of the lines of gfx in ROM, which are
larger than the sceen and can therefore be scrolled
Cisco Heat F1 GP Star
Line Width 1024 1024
Zoom No Yes
[ 256 Sprites ]
Sprites are made of several 16x16 tiles (up to 256x256 pixels)
and can be zoomed in and out. See below for sprite RAM format.
***************************************************************************/
#include "driver.h"
#include "megasys1.h"
/* Variables only used here: */
static int cischeat_ip_select;
#ifdef MAME_DEBUG
static int debugsprites; // For debug purposes
#endif
/* Variables that driver has access to: */
UINT16 *cischeat_roadram[2];
UINT16 *f1gpstr2_ioready;
#ifdef MAME_DEBUG
#define SHOW_READ_ERROR(_format_,_offset_)\
{\
popmessage(_format_,_offset_);\
logerror("CPU #0 PC %06X : Warning, ",activecpu_get_pc()); \
logerror(_format_ "\n",_offset_);\
}
#define SHOW_WRITE_ERROR(_format_,_offset_,_data_)\
{\
popmessage(_format_,_offset_,_data_);\
logerror("CPU #0 PC %06X : Warning, ",activecpu_get_pc()); \
logerror(_format_ "\n",_offset_,_data_); \
}
#else
#define SHOW_READ_ERROR(_format_,_offset_)\
{\
logerror("CPU #0 PC %06X : Warning, ",activecpu_get_pc()); \
logerror(_format_ "\n",_offset_);\
}
#define SHOW_WRITE_ERROR(_format_,_offset_,_data_)\
{\
logerror("CPU #0 PC %06X : Warning, ",activecpu_get_pc()); \
logerror(_format_ "\n",_offset_,_data_); \
}
#endif
#define MEGASYS1_VREG_SCROLL(_n_, _dir_) megasys1_scroll##_dir_[_n_] = new_data;
#define cischeat_tmap_SET_SCROLL(_n_) \
if (megasys1_tmap[_n_]) \
{ \
tilemap_set_scrollx(megasys1_tmap[_n_], 0, megasys1_scrollx[_n_]); \
tilemap_set_scrolly(megasys1_tmap[_n_], 0, megasys1_scrolly[_n_]); \
}
#define cischeat_tmap_DRAW(_n_) \
if ( (megasys1_tmap[_n_]) && (megasys1_active_layers & (1 << _n_) ) ) \
{ \
tilemap_draw(bitmap, cliprect, megasys1_tmap[_n_], flag, 0 ); \
flag = 0; \
}
/***************************************************************************
Video Hardware Init
***************************************************************************/
static void prepare_shadows(void)
{
int i;
for (i = 0;i < 16;i++)
gfx_drawmode_table[i] = DRAWMODE_SOURCE;
gfx_drawmode_table[ 0] = DRAWMODE_SHADOW;
gfx_drawmode_table[15] = DRAWMODE_NONE;
}
/**************************************************************************
Cisco Heat
**************************************************************************/
/* 32 colour codes for the tiles */
VIDEO_START( cischeat )
{
video_start_megasys1(machine);
megasys1_bits_per_color_code = 5;
prepare_shadows();
}
/**************************************************************************
F1 GrandPrix Star
**************************************************************************/
/* 16 colour codes for the tiles */
VIDEO_START( f1gpstar )
{
video_start_cischeat(machine);
megasys1_bits_per_color_code = 4;
}
VIDEO_START( bigrun )
{
video_start_f1gpstar(machine);
}
/***************************************************************************
Hardware registers access
***************************************************************************/
/* This function returns the status of the shift (ACTIVE_LOW):
1 - low shift
0 - high shift
and allows the shift to be handled using two buttons */
static int read_shift(void)
{
static int ret = 1; /* start with low shift */
switch ( (readinputport(0) >> 2) & 3 )
{
case 1 : ret = 1; break; // low shift: button 3
case 2 : ret = 0; break; // high shift: button 4
}
return ret;
}
/*
F1 GP Star has a real pedal, while Cisco Heat's is connected to
a switch. The Former game stores, during boot, the value that
corresponds to the pedal not pressed, and compares against it:
The value returned must decrease when the pedal is pressed.
We support just 2 values for now..
*/
static int read_accelerator(void)
{
if (readinputport(0) & 1) return 0x00; // pedal pressed
else return 0xff;
}
/**************************************************************************
Big Run
**************************************************************************/
READ16_HANDLER( bigrun_vregs_r )
{
switch (offset)
{
case 0x0000/2 : return readinputport(1); // Coins
case 0x0002/2 : return readinputport(2) +
(read_shift()<<1); // Buttons
case 0x0004/2 : return readinputport(3); // Motor Limit Switches
case 0x0006/2 : return readinputport(4); // DSW 1 & 2
case 0x0008/2 : return soundlatch2_word_r(0,0); // From sound cpu
case 0x0010/2 :
switch (cischeat_ip_select & 0x3)
{
case 0 : return readinputport(6); // Driving Wheel
case 1 : return 0xffff; // Cockpit: Up / Down Position
case 2 : return 0xffff; // Cockpit: Left / Right Position?
case 3 : return ~read_accelerator(); // Accelerator (Pedal)
default: return 0xffff;
}
case 0x2200/2 : return readinputport(5); // DSW 3 (4 bits)
default: SHOW_READ_ERROR("vreg %04X read!",offset*2);
return megasys1_vregs[offset];
}
}
WRITE16_HANDLER( bigrun_vregs_w )
{
UINT16 old_data = megasys1_vregs[offset];
UINT16 new_data = COMBINE_DATA(&megasys1_vregs[offset]);
switch (offset)
{
case 0x0000/2 : // leds
if (ACCESSING_LSB)
{
coin_counter_w(0,new_data & 0x01);
coin_counter_w(1,new_data & 0x02);
set_led_status(0,new_data & 0x10); // start button
set_led_status(1,new_data & 0x20); // ?
}
break;
case 0x0002/2 : // ?? 91/1/91/1 ...
break;
case 0x0004/2 : // motor (seat?)
if (ACCESSING_LSB)
set_led_status(2, (new_data != old_data) ? 1 : 0);
break;
case 0x0006/2 : // motor (wheel?)
break;
case 0x000a/2 : // to sound cpu
soundlatch_word_w(0,new_data,0);
break;
case 0x000c/2 : break; // ??
case 0x0010/2 : cischeat_ip_select = new_data; break;
case 0x0012/2 : cischeat_ip_select = new_data+1; break; // value above + 1
case 0x2000/2+0 : MEGASYS1_VREG_SCROLL(0,x) break;
case 0x2000/2+1 : MEGASYS1_VREG_SCROLL(0,y) break;
case 0x2000/2+2 : megasys1_set_vreg_flag(0,new_data);break;
case 0x2008/2+0 : MEGASYS1_VREG_SCROLL(1,x) break;
case 0x2008/2+1 : MEGASYS1_VREG_SCROLL(1,y) break;
case 0x2008/2+2 : megasys1_set_vreg_flag(1,new_data);break;
case 0x2100/2+0 : MEGASYS1_VREG_SCROLL(2,x) break;
case 0x2100/2+1 : MEGASYS1_VREG_SCROLL(2,y) break;
case 0x2100/2+2 : megasys1_set_vreg_flag(2,new_data);break;
case 0x2108/2 : break; // ? written with 0 only
case 0x2208/2 : break; // watchdog reset
/* Not sure about this one.. */
case 0x2308/2 : cpunum_set_input_line(1, INPUT_LINE_RESET, (new_data & 2) ? ASSERT_LINE : CLEAR_LINE );
cpunum_set_input_line(2, INPUT_LINE_RESET, (new_data & 2) ? ASSERT_LINE : CLEAR_LINE );
cpunum_set_input_line(3, INPUT_LINE_RESET, (new_data & 1) ? ASSERT_LINE : CLEAR_LINE );
break;
default: SHOW_WRITE_ERROR("vreg %04X <- %04X",offset*2,data);
}
}
/**************************************************************************
Cisco Heat
**************************************************************************/
READ16_HANDLER( cischeat_vregs_r )
{
switch (offset)
{
case 0x0000/2 : return readinputport(1); // Coins
case 0x0002/2 : return readinputport(2) +
(read_shift()<<1); // Buttons
case 0x0004/2 : return readinputport(3); // Motor Limit Switches
case 0x0006/2 : return readinputport(4); // DSW 1 & 2
case 0x0010/2 :
switch (cischeat_ip_select & 0x3)
{
case 0 : return readinputport(6); // Driving Wheel
case 1 : return ~0; // Cockpit: Up / Down Position?
case 2 : return ~0; // Cockpit: Left / Right Position?
default: return ~0;
}
case 0x2200/2 : return readinputport(5); // DSW 3 (4 bits)
case 0x2300/2 : return soundlatch2_r(0); // From sound cpu
default: SHOW_READ_ERROR("vreg %04X read!",offset*2);
return megasys1_vregs[offset];
}
}
WRITE16_HANDLER( cischeat_vregs_w )
{
UINT16 old_data = megasys1_vregs[offset];
UINT16 new_data = COMBINE_DATA(&megasys1_vregs[offset]);
switch (offset)
{
case 0x0000/2 : // leds
if (ACCESSING_LSB)
{
coin_counter_w(0,new_data & 0x01);
coin_counter_w(1,new_data & 0x02);
set_led_status(0,new_data & 0x10); // start button
set_led_status(1,new_data & 0x20); // ?
}
break;
case 0x0002/2 : // ?? 91/1/91/1 ...
break;
case 0x0004/2 : // motor (seat?)
if (ACCESSING_LSB)
set_led_status(2, (new_data != old_data) ? 1 : 0);
break;
case 0x0006/2 : // motor (wheel?)
break;
case 0x0010/2 : cischeat_ip_select = new_data; break;
case 0x0012/2 : break; // value above + 1
case 0x2000/2+0 : MEGASYS1_VREG_SCROLL(0,x) break;
case 0x2000/2+1 : MEGASYS1_VREG_SCROLL(0,y) break;
case 0x2000/2+2 : megasys1_set_vreg_flag(0,new_data);break;
case 0x2008/2+0 : MEGASYS1_VREG_SCROLL(1,x) break;
case 0x2008/2+1 : MEGASYS1_VREG_SCROLL(1,y) break;
case 0x2008/2+2 : megasys1_set_vreg_flag(1,new_data);break;
case 0x2100/2+0 : MEGASYS1_VREG_SCROLL(2,x) break;
case 0x2100/2+1 : MEGASYS1_VREG_SCROLL(2,y) break;
case 0x2100/2+2 : megasys1_set_vreg_flag(2,new_data);break;
case 0x2108/2 : break; // ? written with 0 only
case 0x2208/2 : break; // watchdog reset
case 0x2300/2 : /* Sound CPU: reads latch during int 4, and stores command */
soundlatch_word_w(0,new_data,0);
cpunum_set_input_line(3,4,HOLD_LINE);
break;
/* Not sure about this one.. */
case 0x2308/2 : cpunum_set_input_line(1, INPUT_LINE_RESET, (new_data & 2) ? ASSERT_LINE : CLEAR_LINE );
cpunum_set_input_line(2, INPUT_LINE_RESET, (new_data & 2) ? ASSERT_LINE : CLEAR_LINE );
cpunum_set_input_line(3, INPUT_LINE_RESET, (new_data & 1) ? ASSERT_LINE : CLEAR_LINE );
break;
default: SHOW_WRITE_ERROR("vreg %04X <- %04X",offset*2,data);
}
}
/**************************************************************************
F1 GrandPrix Star
**************************************************************************/
READ16_HANDLER( f1gpstar_vregs_r )
{
switch (offset)
{
case 0x0000/2 : // DSW 1&2: coinage changes with Country
{
int val = readinputport(1);
if (val & 0x0200) return readinputport(6) | val; // JP, US
else return readinputport(7) | val; // UK, FR
}
// case 0x0002/2 : return 0xFFFF;
case 0x0004/2 : return readinputport(2) +
(read_shift()<<5); // Buttons
case 0x0006/2 : return readinputport(3); // ? Read at boot only
case 0x0008/2 : return soundlatch2_r(0); // From sound cpu
case 0x000c/2 : return readinputport(4); // DSW 3
case 0x0010/2 : // Accel + Driving Wheel
return (read_accelerator()&0xff) + ((readinputport(5)&0xff)<<8);
default: SHOW_READ_ERROR("vreg %04X read!",offset*2);
return megasys1_vregs[offset];
}
}
READ16_HANDLER( f1gpstr2_vregs_r )
{
if ((offset >= 0x1000/2) && (offset < 0x2000/2))
return megasys1_vregs[offset];
switch (offset)
{
case 0x0018/2 :
return (f1gpstr2_ioready[0]&1) ? 0xff : 0xf0;
default:
return f1gpstar_vregs_r(offset,mem_mask);
}
}
/**************************************************************************
Wild Pilot
**************************************************************************/
READ16_HANDLER( wildplt_vregs_r )
{
if ((offset >= 0x1000/2) && (offset < 0x2000/2))
return megasys1_vregs[offset];
switch (offset)
{
case 0x0000/2 : return readinputport(0); // DSW 1 & 2
case 0x0004/2 : return readinputport(1); // Buttons
case 0x0008/2 : return soundlatch2_r(0); // From sound cpu
case 0x0010/2 : // X, Y
return readinputport(2) | (readinputport(3)<<8);
case 0x0018/2 :
return (f1gpstr2_ioready[0]&1) ? 0xff : 0xf0;
default: SHOW_READ_ERROR("vreg %04X read!",offset*2);
return megasys1_vregs[offset];
}
}
WRITE16_HANDLER( f1gpstar_vregs_w )
{
// UINT16 old_data = megasys1_vregs[offset];
UINT16 new_data = COMBINE_DATA(&megasys1_vregs[offset]);
switch (offset)
{
/*
CPU #0 PC 00234A : Warning, vreg 0000 <- 0000
CPU #0 PC 002350 : Warning, vreg 0002 <- 0000
CPU #0 PC 00235C : Warning, vreg 0006 <- 0000
*/
// "shudder" motors, leds
case 0x0004/2 :
if (ACCESSING_LSB)
{
coin_counter_w(0,new_data & 0x01);
coin_counter_w(1,new_data & 0x02);
set_led_status(0,new_data & 0x04); // start button
set_led_status(1,new_data & 0x20); // ?
// wheel | seat motor
set_led_status(2, ((new_data >> 3) | (new_data >> 4)) & 1 );
}
break;
case 0x0014/2 : break;
/* Usually written in sequence, but not always */
case 0x0008/2 : soundlatch_word_w(0,new_data,0); break;
case 0x0018/2 : cpunum_set_input_line(3,4,HOLD_LINE); break;
case 0x0010/2 : break;
case 0x2000/2+0 : MEGASYS1_VREG_SCROLL(0,x) break;
case 0x2000/2+1 : MEGASYS1_VREG_SCROLL(0,y) break;
case 0x2000/2+2 : megasys1_set_vreg_flag(0,new_data);break;
case 0x2008/2+0 : MEGASYS1_VREG_SCROLL(1,x) break;
case 0x2008/2+1 : MEGASYS1_VREG_SCROLL(1,y) break;
case 0x2008/2+2 : megasys1_set_vreg_flag(1,new_data);break;
case 0x2100/2+0 : MEGASYS1_VREG_SCROLL(2,x) break;
case 0x2100/2+1 : MEGASYS1_VREG_SCROLL(2,y) break;
case 0x2100/2+2 : megasys1_set_vreg_flag(2,new_data);break;
case 0x2108/2 : break; // ? written with 0 only
case 0x2208/2 : break; // watchdog reset
/* Not sure about this one. Values: $10 then 0, $7 then 0 */
case 0x2308/2 : cpunum_set_input_line(1, INPUT_LINE_RESET, (new_data & 1) ? ASSERT_LINE : CLEAR_LINE );
cpunum_set_input_line(2, INPUT_LINE_RESET, (new_data & 2) ? ASSERT_LINE : CLEAR_LINE );
cpunum_set_input_line(3, INPUT_LINE_RESET, (new_data & 4) ? ASSERT_LINE : CLEAR_LINE );
break;
default: SHOW_WRITE_ERROR("vreg %04X <- %04X",offset*2,data);
}
}
WRITE16_HANDLER( f1gpstr2_vregs_w )
{
// UINT16 old_data = megasys1_vregs[offset];
UINT16 new_data = COMBINE_DATA(&megasys1_vregs[offset]);
if ((offset >= 0x1000/2) && (offset < 0x2000/2))
return;
switch (offset)
{
case 0x0000/2 :
if (ACCESSING_LSB)
{
cpunum_set_input_line(4,4,(new_data & 4)?ASSERT_LINE:CLEAR_LINE);
cpunum_set_input_line(4,2,(new_data & 2)?ASSERT_LINE:CLEAR_LINE);
}
break;
default:
f1gpstar_vregs_w(offset,data,mem_mask);
}
}
/**************************************************************************
Scud Hammer
**************************************************************************/
WRITE16_HANDLER( scudhamm_vregs_w )
{
// int old_data = megasys1_vregs[offset];
int new_data = COMBINE_DATA(&megasys1_vregs[offset]);
switch (offset)
{
case 0x000/2+0 : MEGASYS1_VREG_SCROLL(0,x) break;
case 0x000/2+1 : MEGASYS1_VREG_SCROLL(0,y) break;
case 0x000/2+2 : megasys1_set_vreg_flag(0,new_data);break;
// UNUSED LAYER
case 0x008/2+0 :
case 0x008/2+1 :
case 0x008/2+2 :
break;
case 0x100/2+0 : MEGASYS1_VREG_SCROLL(2,x) break;
case 0x100/2+1 : MEGASYS1_VREG_SCROLL(2,y) break;
case 0x100/2+2 : megasys1_set_vreg_flag(2,new_data);break;
case 0x208/2 : watchdog_reset_w(0,0); break;
default: SHOW_WRITE_ERROR("vreg %04X <- %04X",offset*2,data);
}
}
/***************************************************************************
Road Drawing
***************************************************************************/
/* horizontal size of 1 line and 1 tile of the road */
#define X_SIZE (1024)
#define TILE_SIZE (64)
/**************************************************************************
Cisco Heat road format
Offset: Bits: Value:
00.w Code
02.w X Scroll
04.w fedc ---- ---- ---- unused?
---- ba98 ---- ---- Priority
---- ---- 76-- ---- unused?
---- ---- --54 3210 Color
06.w Unused
**************************************************************************/
/* Draw the road in the given bitmap. The priority1 and priority2 parameters
specify the range of lines to draw */
static void cischeat_draw_road(running_machine *machine, mame_bitmap *bitmap, const rectangle *cliprect, int road_num, int priority1, int priority2, int transparency)
{
int curr_code,sx,sy;
int min_priority, max_priority;
rectangle rect = *cliprect;
gfx_element *gfx = machine->gfx[(road_num & 1)?5:4];
UINT16 *roadram = cischeat_roadram[road_num & 1];
int min_y = rect.min_y;
int max_y = rect.max_y;
int max_x = rect.max_x;
if (priority1 < priority2) { min_priority = priority1; max_priority = priority2; }
else { min_priority = priority2; max_priority = priority1; }
/* Move the priority values in place */
min_priority = (min_priority & 7) * 0x100;
max_priority = (max_priority & 7) * 0x100;
/* Let's draw from the top to the bottom of the visible screen */
for (sy = min_y ; sy <= max_y ; sy ++)
{
int code = roadram[ sy * 4 + 0 ];
int xscroll = roadram[ sy * 4 + 1 ];
int attr = roadram[ sy * 4 + 2 ];
/* high byte is a priority information */
if ( ((attr & 0x700) < min_priority) || ((attr & 0x700) > max_priority) )
continue;
/* line number converted to tile number (each tile is TILE_SIZE x 1) */
code = code * (X_SIZE/TILE_SIZE);
xscroll %= X_SIZE;
curr_code = code + xscroll/TILE_SIZE;
for (sx = -(xscroll%TILE_SIZE) ; sx <= max_x ; sx +=TILE_SIZE)
{
drawgfx(bitmap,gfx,
curr_code++,
attr,
0,0,
sx,sy,
&rect,
transparency,15);
/* wrap around */
if (curr_code%(X_SIZE/TILE_SIZE)==0) curr_code = code;
}
}
}
/**************************************************************************
F1 GrandPrix Star road format
Offset: Bits: Value:
00.w fedc ---- ---- ---- Priority
---- ba98 7654 3210 X Scroll (After Zoom)
02.w fedc ba-- ---- ---- unused?
---- --98 7654 3210 X Zoom
04.w fe-- ---- ---- ---- unused?
--dc ba98 ---- ---- Color
---- ---- 7654 3210 ?
06.w Code
Imagine an "empty" line, 2 * X_SIZE wide, with the gfx from
the ROM - whose original size is X_SIZE - in the middle.
Zooming acts on this latter and can shrink it to 1 pixel or
widen it to 2 * X_SIZE, while *keeping it centered* in the
empty line. Scrolling acts on the resulting line.
**************************************************************************/
/* Draw the road in the given bitmap. The priority1 and priority2 parameters
specify the range of lines to draw */
static void f1gpstar_draw_road(running_machine *machine, mame_bitmap *bitmap, const rectangle *cliprect, int road_num, int priority1, int priority2, int transparency)
{
int sx,sy;
int xstart;
int min_priority, max_priority;
rectangle rect = *cliprect;
gfx_element *gfx = machine->gfx[(road_num & 1)?5:4];
UINT16 *roadram = cischeat_roadram[road_num & 1];
int min_y = rect.min_y;
int max_y = rect.max_y;
int max_x = rect.max_x << 16; // use fixed point values (16.16), for accuracy
if (priority1 < priority2) { min_priority = priority1; max_priority = priority2; }
else { min_priority = priority2; max_priority = priority1; }
/* Move the priority values in place */
min_priority = (min_priority & 7) * 0x1000;
max_priority = (max_priority & 7) * 0x1000;
/* Let's draw from the top to the bottom of the visible screen */
for (sy = min_y ; sy <= max_y ; sy ++)
{
int xscale, xdim;
int xscroll = roadram[ sy * 4 + 0 ];
int xzoom = roadram[ sy * 4 + 1 ];
int attr = roadram[ sy * 4 + 2 ];
int code = roadram[ sy * 4 + 3 ];
/* highest nibble is a priority information */
if ( ((xscroll & 0x7000) < min_priority) || ((xscroll & 0x7000) > max_priority) )
continue;
/* zoom code range: 000-3ff scale range: 0.0-2.0 */
xscale = ( ((xzoom & 0x3ff)+1) << (16+1) ) / 0x400;
/* line number converted to tile number (each tile is TILE_SIZE x 1) */
code = code * (X_SIZE/TILE_SIZE);
/* dimension of a tile after zoom */
xdim = TILE_SIZE * xscale;
xscroll %= 2 * X_SIZE;
xstart = (X_SIZE - xscroll) * 0x10000;
xstart -= (X_SIZE * xscale) / 2;
/* let's approximate to the nearest greater integer value
to avoid holes in between tiles */
xscale += (1<<16)/TILE_SIZE;
/* Draw the line */
for (sx = xstart ; sx <= max_x ; sx += xdim)
{
drawgfxzoom(bitmap,gfx,
code++,
attr >> 8,
0,0,
sx / 0x10000, sy,
&rect,
transparency,15,
xscale, 1 << 16);
/* stop when the end of the line of gfx is reached */
if ((code % (X_SIZE/TILE_SIZE)) == 0) break;
}
}
}
/***************************************************************************
Cisco Heat & F1 GP Star Sprites Drawing
Offset: Bits: Value:
00 fed- ---- ---- ---- unused?
---c ---- ---- ---- Don't display this sprite
---- ba98 ---- ---- unused?
---- ---- 7654 ---- Number of tiles along Y, minus 1 (1-16)
---- ---- ---- 3210 Number of tiles along X, minus 1 (1-16)
02/04 fed- ---- ---- ---- unused?
---c ---- ---- ---- Flip X/Y
---- ba9- ---- ---- ? X/Y zoom ?
---- ---8 7654 3210 X/Y zoom
06/08 fedc ba-- ---- ---- ? X/Y position ?
---- --98 7654 3210 X/Y position
0A 0 ?
0C Code
0E fed- ---- ---- ---- unused?
---c ---- ---- ---- Use pen 0 as shadow
---- ba98 ---- ---- Priority
---- ---- 7--- ---- unused?
---- ---- -654 3210 Color
***************************************************************************/
#define SHRINK(_org_,_fact_) ( ( ( (_org_) << 16 ) * (_fact_ & 0x01ff) ) / 0x80 )
/* Draw sprites, in the given priority range, to a bitmap.
Priorities between 0 and 15 cover sprites whose priority nibble
is between 0 and 15. Priorities between 0+16 and 15+16 cover
sprites whose priority nibble is between 0 and 15 and whose
colour code's high bit is set. */
static void cischeat_draw_sprites(running_machine *machine, mame_bitmap *bitmap , const rectangle *cliprect, int priority1, int priority2)
{
int x, sx, flipx, xzoom, xscale, xdim, xnum, xstart, xend, xinc;
int y, sy, flipy, yzoom, yscale, ydim, ynum, ystart, yend, yinc;
int code, attr, color, size, shadow;
int min_priority, max_priority, high_sprites;
UINT16 *source = spriteram16;
const UINT16 *finish = source + 0x1000/2;
/* Move the priority values in place */
high_sprites = (priority1 >= 16) | (priority2 >= 16);
priority1 = (priority1 & 0x0f) * 0x100;
priority2 = (priority2 & 0x0f) * 0x100;
if (priority1 < priority2) { min_priority = priority1; max_priority = priority2; }
else { min_priority = priority2; max_priority = priority1; }
for (; source < finish; source += 0x10/2 )
{
size = source[ 0 ];
if (size & 0x1000) continue;
/* number of tiles */
xnum = ( (size & 0x0f) >> 0 ) + 1;
ynum = ( (size & 0xf0) >> 4 ) + 1;
xzoom = source[ 1 ];
yzoom = source[ 2 ];
flipx = xzoom & 0x1000;
flipy = yzoom & 0x1000;
sx = source[ 3 ];
sy = source[ 4 ];
sx = (sx & 0x1ff) - (sx & 0x200);
sy = (sy & 0x1ff) - (sy & 0x200);
/* use fixed point values (16.16), for accuracy */
sx <<= 16;
sy <<= 16;
/* dimension of a tile after zoom */
#ifdef MAME_DEBUG
if ( input_code_pressed(KEYCODE_Z) && input_code_pressed(KEYCODE_M) )
{
xdim = 16 << 16;
ydim = 16 << 16;
}
else
#endif
{
xdim = SHRINK(16,xzoom);
ydim = SHRINK(16,yzoom);
}
if ( ( (xdim / 0x10000) == 0 ) || ( (ydim / 0x10000) == 0) ) continue;
/* the y pos passed to the hardware is the that of the last line,
we need the y pos of the first line */
sy -= (ydim * ynum);
code = source[ 6 ];
attr = source[ 7 ];
color = attr & 0x007f;
shadow = attr & 0x1000;
/* high byte is a priority information */
if ( ((attr & 0x700) < min_priority) || ((attr & 0x700) > max_priority) )
continue;
if ( high_sprites && !(color & 0x80) )
continue;
#ifdef MAME_DEBUG
if ( (debugsprites) && ( ((attr & 0x0300)>>8) != (debugsprites-1) ) ) { continue; };
#endif
xscale = xdim / 16;
yscale = ydim / 16;
/* let's approximate to the nearest greater integer value
to avoid holes in between tiles */
if (xscale & 0xffff) xscale += (1<<16)/16;
if (yscale & 0xffff) yscale += (1<<16)/16;
if (flipx) { xstart = xnum-1; xend = -1; xinc = -1; }
else { xstart = 0; xend = xnum; xinc = +1; }
if (flipy) { ystart = ynum-1; yend = -1; yinc = -1; }
else { ystart = 0; yend = ynum; yinc = +1; }
for (y = ystart; y != yend; y += yinc)
{
for (x = xstart; x != xend; x += xinc)
{
drawgfxzoom(bitmap,machine->gfx[3],
code++,
color,
flipx,flipy,
(sx + x * xdim) / 0x10000, (sy + y * ydim) / 0x10000,
cliprect,
shadow ? TRANSPARENCY_PEN_TABLE : TRANSPARENCY_PEN,15,
xscale, yscale );
}
}
#ifdef MAME_DEBUG
#if 0
if (input_code_pressed(KEYCODE_X))
{ /* Display some info on each sprite */
sprintf(buf, "%04x",attr);
ui_draw_text(buf, sx>>16, sy>>16);
}
#endif
#endif
} /* end sprite loop */
}
/***************************************************************************
Big Run Sprites Drawing
Offset: Bits: Value:
00 fed- ---- ---- ---- unused?
---c ---- ---- ---- Don't display this sprite
---- ba98 ---- ---- unused?
---- ---- 7654 ---- Number of tiles along Y, minus 1 (1-16)
---- ---- ---- 3210 Number of tiles along X, minus 1 (1-16)
02 fedc ba98 ---- ---- Y zoom
---- ---- 7654 3210 X zoom
04/06 fed- ---- ---- ----
---c ---- ---- ---- X/Y flip
---- ba9- ---- ----
---- ---8 7654 3210 X/Y position (signed)
08 ?
0A ?
0C Code
0E fed- ---- ---- ---- unused?
---c ---- ---- ---- Use pen 0 as shadow
---- ba98 ---- ---- Priority
---- ---- 76-- ---- unused?
---- ---- --54 3210 Color
***************************************************************************/
static void bigrun_draw_sprites(running_machine *machine, mame_bitmap *bitmap , const rectangle *cliprect, int priority1, int priority2)
{
int x, sx, flipx, xzoom, xscale, xdim, xnum, xstart, xend, xinc;
int y, sy, flipy, yzoom, yscale, ydim, ynum, ystart, yend, yinc;
int code, attr, color, size, shadow;
int min_priority, max_priority, high_sprites;
UINT16 *source = spriteram16;
const UINT16 *finish = source + 0x1000/2;
/* Move the priority values in place */
high_sprites = (priority1 >= 16) | (priority2 >= 16);
priority1 = (priority1 & 0x0f) * 0x100;
priority2 = (priority2 & 0x0f) * 0x100;
if (priority1 < priority2) { min_priority = priority1; max_priority = priority2; }
else { min_priority = priority2; max_priority = priority1; }
for (; source < finish; source += 0x10/2 )
{
size = source[ 0 ];
if (size & 0x1000) continue;
/* number of tiles */
xnum = ( (size & 0x0f) >> 0 ) + 1;
ynum = ( (size & 0xf0) >> 4 ) + 1;
yzoom = (source[ 1 ] >> 8) & 0xff;
xzoom = (source[ 1 ] >> 0) & 0xff;
sx = source[ 2 ];
sy = source[ 3 ];
flipx = sx & 0x1000;
flipy = sy & 0x1000;
// sx = (sx & 0x1ff) - (sx & 0x200);
// sy = (sy & 0x1ff) - (sy & 0x200);
sx = (sx & 0x0ff) - (sx & 0x100);
sy = (sy & 0x0ff) - (sy & 0x100);
/* use fixed point values (16.16), for accuracy */
sx <<= 16;
sy <<= 16;
/* dimension of a tile after zoom */
#ifdef MAME_DEBUG
if ( input_code_pressed(KEYCODE_Z) && input_code_pressed(KEYCODE_M) )
{
xdim = 16 << 16;
ydim = 16 << 16;
}
else
#endif
{
xdim = SHRINK(16,xzoom);
ydim = SHRINK(16,yzoom);
}
if ( ( (xdim / 0x10000) == 0 ) || ( (ydim / 0x10000) == 0) ) continue;
// sy -= (ydim * ynum);
code = source[ 6 ];
attr = source[ 7 ];
color = attr & 0x007f;
shadow = attr & 0x1000;
/* high byte is a priority information */
if ( ((attr & 0x700) < min_priority) || ((attr & 0x700) > max_priority) )
continue;
if ( high_sprites && !(color & 0x80) )
continue;
#ifdef MAME_DEBUG
if ( (debugsprites) && ( ((attr & 0x0300)>>8) != (debugsprites-1) ) ) { continue; };
#endif
xscale = xdim / 16;
yscale = ydim / 16;
/* let's approximate to the nearest greater integer value
to avoid holes in between tiles */
if (xscale & 0xffff) xscale += (1<<16)/16;
if (yscale & 0xffff) yscale += (1<<16)/16;
if (flipx) { xstart = xnum-1; xend = -1; xinc = -1; }
else { xstart = 0; xend = xnum; xinc = +1; }
if (flipy) { ystart = ynum-1; yend = -1; yinc = -1; }
else { ystart = 0; yend = ynum; yinc = +1; }
for (y = ystart; y != yend; y += yinc)
{
for (x = xstart; x != xend; x += xinc)
{
drawgfxzoom(bitmap,machine->gfx[3],
code++,
color,
flipx,flipy,
(sx + x * xdim) / 0x10000, (sy + y * ydim) / 0x10000,
cliprect,
shadow ? TRANSPARENCY_PEN_TABLE : TRANSPARENCY_PEN,15,
xscale, yscale );
}
}
#ifdef MAME_DEBUG
#if 0
if (input_code_pressed(KEYCODE_X))
{ /* Display some info on each sprite */
sprintf(buf, "%04x",attr);
ui_draw_text(buf, sx>>16, sy>>16);
}
#endif
#endif
} /* end sprite loop */
}
/***************************************************************************
Screen Drawing
***************************************************************************/
#define CISCHEAT_LAYERSCTRL \
debugsprites = 0; \
if ( input_code_pressed(KEYCODE_Z) || input_code_pressed(KEYCODE_X) ) \
{ \
int msk = 0; \
if (input_code_pressed(KEYCODE_Q)) { msk |= 0x01;} \
if (input_code_pressed(KEYCODE_W)) { msk |= 0x02;} \
if (input_code_pressed(KEYCODE_E)) { msk |= 0x04;} \
if (input_code_pressed(KEYCODE_A)) { msk |= 0x08; debugsprites = 1;} \
if (input_code_pressed(KEYCODE_S)) { msk |= 0x08; debugsprites = 2;} \
if (input_code_pressed(KEYCODE_D)) { msk |= 0x08; debugsprites = 3;} \
if (input_code_pressed(KEYCODE_F)) { msk |= 0x08; debugsprites = 4;} \
if (input_code_pressed(KEYCODE_R)) { msk |= 0x10;} \
if (input_code_pressed(KEYCODE_T)) { msk |= 0x20;} \
\
if (msk != 0) megasys1_active_layers &= msk; \
} \
\
{ \
static int show_unknown; \
if ( input_code_pressed(KEYCODE_Z) && input_code_pressed_once(KEYCODE_U) ) \
show_unknown ^= 1; \
if (show_unknown) \
popmessage("0:%04X 2:%04X 4:%04X 6:%04X c:%04X", \
megasys1_vregs[0],megasys1_vregs[1],megasys1_vregs[2],megasys1_vregs[3],megasys1_vregs[0xc/2] ); \
}
/**************************************************************************
Big Run
**************************************************************************/
VIDEO_UPDATE( bigrun )
{
int i;
int megasys1_active_layers1, flag;
#ifdef MAME_DEBUG
/* FAKE Videoreg */
megasys1_active_layers = megasys1_vregs[0x2400/2];
if (megasys1_active_layers == 0) megasys1_active_layers = 0x3f;
#else
megasys1_active_layers = 0x3f;
#endif
megasys1_active_layers1 = megasys1_active_layers;
#ifdef MAME_DEBUG
CISCHEAT_LAYERSCTRL
#endif
cischeat_tmap_SET_SCROLL(0)
cischeat_tmap_SET_SCROLL(1)
cischeat_tmap_SET_SCROLL(2)
fillbitmap(bitmap,machine->pens[0],cliprect);
for (i = 7; i >= 4; i--)
{ /* bitmap, road, min_priority, max_priority, transparency */
if (megasys1_active_layers & 0x10) cischeat_draw_road(machine,bitmap,cliprect,0,i,i,TRANSPARENCY_NONE);
if (megasys1_active_layers & 0x20) cischeat_draw_road(machine,bitmap,cliprect,1,i,i,TRANSPARENCY_PEN);
}
flag = 0;
cischeat_tmap_DRAW(0)
cischeat_tmap_DRAW(1)
for (i = 3; i >= 0; i--)
{ /* bitmap, road, min_priority, max_priority, transparency */
if (megasys1_active_layers & 0x10) cischeat_draw_road(machine,bitmap,cliprect,0,i,i,TRANSPARENCY_PEN);
if (megasys1_active_layers & 0x20) cischeat_draw_road(machine,bitmap,cliprect,1,i,i,TRANSPARENCY_PEN);
}
if (megasys1_active_layers & 0x08) bigrun_draw_sprites(machine,bitmap,cliprect,15,0);
cischeat_tmap_DRAW(2)
megasys1_active_layers = megasys1_active_layers1;
return 0;
}
/**************************************************************************
Cisco Heat
**************************************************************************/
VIDEO_UPDATE( cischeat )
{
int megasys1_active_layers1, flag;
#ifdef MAME_DEBUG
/* FAKE Videoreg */
megasys1_active_layers = megasys1_vregs[0x2400/2];
if (megasys1_active_layers == 0) megasys1_active_layers = 0x3f;
#else
megasys1_active_layers = 0x3f;
#endif
megasys1_active_layers1 = megasys1_active_layers;
#ifdef MAME_DEBUG
CISCHEAT_LAYERSCTRL
#endif
cischeat_tmap_SET_SCROLL(0)
cischeat_tmap_SET_SCROLL(1)
cischeat_tmap_SET_SCROLL(2)
fillbitmap(bitmap,machine->pens[0],cliprect);
/* bitmap, road, priority, transparency */
if (megasys1_active_layers & 0x10) cischeat_draw_road(machine,bitmap,cliprect,0,7,5,TRANSPARENCY_NONE);
if (megasys1_active_layers & 0x20) cischeat_draw_road(machine,bitmap,cliprect,1,7,5,TRANSPARENCY_PEN);
flag = 0;
cischeat_tmap_DRAW(0)
// else fillbitmap(bitmap,machine->pens[0],cliprect);
cischeat_tmap_DRAW(1)
if (megasys1_active_layers & 0x08) cischeat_draw_sprites(machine,bitmap,cliprect,15,3);
if (megasys1_active_layers & 0x10) cischeat_draw_road(machine,bitmap,cliprect,0,4,1,TRANSPARENCY_PEN);
if (megasys1_active_layers & 0x20) cischeat_draw_road(machine,bitmap,cliprect,1,4,1,TRANSPARENCY_PEN);
if (megasys1_active_layers & 0x08) cischeat_draw_sprites(machine,bitmap,cliprect,2,2);
if (megasys1_active_layers & 0x10) cischeat_draw_road(machine,bitmap,cliprect,0,0,0,TRANSPARENCY_PEN);
if (megasys1_active_layers & 0x20) cischeat_draw_road(machine,bitmap,cliprect,1,0,0,TRANSPARENCY_PEN);
if (megasys1_active_layers & 0x08) cischeat_draw_sprites(machine,bitmap,cliprect,1,0);
cischeat_tmap_DRAW(2)
/* for the map screen */
if (megasys1_active_layers & 0x08) cischeat_draw_sprites(machine,bitmap,cliprect,0+16,0+16);
megasys1_active_layers = megasys1_active_layers1;
return 0;
}
/**************************************************************************
F1 GrandPrix Star
**************************************************************************/
VIDEO_UPDATE( f1gpstar )
{
int megasys1_active_layers1, flag;
#ifdef MAME_DEBUG
/* FAKE Videoreg */
megasys1_active_layers = megasys1_vregs[0x2400/2];
if (megasys1_active_layers == 0) megasys1_active_layers = 0x3f;
#else
megasys1_active_layers = 0x3f;
#endif
megasys1_active_layers1 = megasys1_active_layers;
#ifdef MAME_DEBUG
CISCHEAT_LAYERSCTRL
#endif
cischeat_tmap_SET_SCROLL(0)
cischeat_tmap_SET_SCROLL(1)
cischeat_tmap_SET_SCROLL(2)
fillbitmap(bitmap,machine->pens[0],cliprect);
/* 1: clouds 5, grad 7, road 0 2: clouds 5, grad 7, road 0, tunnel roof 0 */
/* road 1!! 0!! */ /* bitmap, road, min_priority, max_priority, transparency */
if (megasys1_active_layers & 0x20) f1gpstar_draw_road(machine,bitmap,cliprect,1,6,7,TRANSPARENCY_PEN);
if (megasys1_active_layers & 0x10) f1gpstar_draw_road(machine,bitmap,cliprect,0,6,7,TRANSPARENCY_PEN);
flag = 0;
cischeat_tmap_DRAW(0)
// else fillbitmap(bitmap,machine->pens[0],cliprect);
cischeat_tmap_DRAW(1)
/* road 1!! 0!! */ /* bitmap, road, min_priority, max_priority, transparency */
if (megasys1_active_layers & 0x20) f1gpstar_draw_road(machine,bitmap,cliprect,1,1,5,TRANSPARENCY_PEN);
if (megasys1_active_layers & 0x10) f1gpstar_draw_road(machine,bitmap,cliprect,0,1,5,TRANSPARENCY_PEN);
if (megasys1_active_layers & 0x08) cischeat_draw_sprites(machine,bitmap,cliprect,15,2);
/* road 1!! 0!! */ /* bitmap, road, min_priority, max_priority, transparency */
if (megasys1_active_layers & 0x20) f1gpstar_draw_road(machine,bitmap,cliprect,1,0,0,TRANSPARENCY_PEN);
if (megasys1_active_layers & 0x10) f1gpstar_draw_road(machine,bitmap,cliprect,0,0,0,TRANSPARENCY_PEN);
if (megasys1_active_layers & 0x08) cischeat_draw_sprites(machine,bitmap,cliprect,1,1);
cischeat_tmap_DRAW(2)
if (megasys1_active_layers & 0x08) cischeat_draw_sprites(machine,bitmap,cliprect,0,0);
megasys1_active_layers = megasys1_active_layers1;
return 0;
}
/**************************************************************************
Scud Hammer
**************************************************************************/
extern UINT16 scudhamm_motor_command;
READ16_HANDLER( scudhamm_motor_pos_r );
READ16_HANDLER( scudhamm_motor_status_r );
READ16_HANDLER( scudhamm_analog_r );
VIDEO_UPDATE( scudhamm )
{
int megasys1_active_layers1, flag;
megasys1_active_layers = 0x0d;
megasys1_active_layers1 = megasys1_active_layers;
#ifdef MAME_DEBUG
debugsprites = 0;
if ( input_code_pressed(KEYCODE_Z) || input_code_pressed(KEYCODE_X) )
{
int msk = 0;
if (input_code_pressed(KEYCODE_Q)) { msk |= 0x1;}
if (input_code_pressed(KEYCODE_W)) { msk |= 0x2;}
if (input_code_pressed(KEYCODE_E)) { msk |= 0x4;}
if (input_code_pressed(KEYCODE_A)) { msk |= 0x8; debugsprites = 1;}
if (input_code_pressed(KEYCODE_S)) { msk |= 0x8; debugsprites = 2;}
if (input_code_pressed(KEYCODE_D)) { msk |= 0x8; debugsprites = 3;}
if (input_code_pressed(KEYCODE_F)) { msk |= 0x8; debugsprites = 4;}
if (msk != 0) megasys1_active_layers &= msk;
#if 1
popmessage("Cmd: %04X Pos:%04X Lim:%04X Inp:%04X",
scudhamm_motor_command,
scudhamm_motor_pos_r(0,0),
scudhamm_motor_status_r(0,0),
scudhamm_analog_r(0,0) );
#endif
}
#endif
cischeat_tmap_SET_SCROLL(0)
// cischeat_tmap_SET_SCROLL(1)
cischeat_tmap_SET_SCROLL(2)
fillbitmap(bitmap,machine->pens[0],cliprect);
flag = 0;
cischeat_tmap_DRAW(0)
// else fillbitmap(bitmap,machine->pens[0],cliprect);
// cischeat_tmap_DRAW(1)
if (megasys1_active_layers & 0x08) cischeat_draw_sprites(machine,bitmap,cliprect,0,15);
cischeat_tmap_DRAW(2)
megasys1_active_layers = megasys1_active_layers1;
return 0;
}