// license:BSD-3-Clause
// copyright-holders:Quench, Yochizo, David Haywood
// thanks-to:Richard Bush
/*****************************************************************************
ToaPlan game hardware from 1991 - 1994
Raizing/8ing game hardware from 1993 onwards
-------------------------------------------------
Driver by: Quench and Yochizo
Original othldrby.c by Nicola Salmoria
Raizing games and Truxton 2 are heavily dependent on the Raine source -
many thanks to Richard Bush and the Raine team. [Yochizo]
Supported games:
Name Board No Maker Game name
----------------------------------------------------------------------------
tekipaki TP-020 Toaplan Teki Paki
ghox TP-021 Toaplan Ghox (Spinner with single up/down axis control)
ghoxj TP-021 Toaplan Ghox (8-Way Joystick controls)
dogyuun TP-022 Toaplan Dogyuun
dogyuuna TP-022 Toaplan Dogyuun (older)
dogyuunt TP-022 Toaplan Dogyuun (location test)
kbash TP-023 Toaplan Knuckle Bash
kbash2 bootleg Toaplan Knuckle Bash 2
truxton2 TP-024 Toaplan Truxton 2 / Tatsujin Oh
pipibibs TP-025 Toaplan Pipi & Bibis / Whoopee!! (set 1)
pipibibsa TP-025 Toaplan Pipi & Bibis / Whoopee!! (set 2)
pipibibsp TP-025 Toaplan Pipi & Bibis / Whoopee!! (Prototype)
pipibibsbl bootleg Toaplan Pipi & Bibis / Whoopee!! (based of the prototype)
whoopee *TP-025/TP-020 Toaplan Pipi & Bibis / Whoopee!! (Teki Paki hardware)
fixeight TP-026 Toaplan FixEight
fixeightbl bootleg Toaplan FixEight
grindstm TP-027 Toaplan Grind Stormer (1992)
grindstma TP-027 Toaplan Grind Stormer (1992) (older)
vfive TP-027 Toaplan V-V (V-Five) (1993 - Japan only)
batsugun TP-030 Toaplan Batsugun
batsuguna TP-030 Toaplan Batsugun (older)
batsugunsp TP-030 Toaplan Batsugun (Special Version)
pwrkick SW931201 Sunwise Power Kick
othldrby ?????? Sunwise Othello Derby
snowbro2 TP-033 Hanafram Snow Bros. 2 - With New Elves
* This version of Whoopee!! is on a board labeled TP-020
(same board number, and same hardware, as Teki Paki)
but the ROMs are labeled TP-025.
sstriker RA-MA7893-01 Raizing Sorcer Striker
sstrikera RA-MA7893-01 Raizing Sorcer Striker (Unite Trading license)
mahoudai RA-MA7893-01 Raizing Mahou Daisakusen (Japan)
kingdmgp RA-MA9402-03 Raizing/8ing Kingdom Grandprix
shippumd RA-MA9402-03 Raizing/8ing Shippu Mahou Daisakusen (Japan)
bgaregga RA9503 Raizing/8ing Battle Garegga (World - Sat Feb 3 1996)
bgareggahk RA9503 Raizing/8ing Battle Garegga (Hong Kong (and Austria?) - Sat Feb 3 1996)
bgareggatw RA9503 Raizing/8ing Battle Garegga (Taiwan (and Germany?) - Thu Feb 1 1996)
bgaregganv RA9503 Raizing/8ing Battle Garegga - New Version (Hong Kong (and Austria?) - Sat Mar 2 1996)
bgareggat2 RA9503 Raizing/8ing Battle Garegga - Type 2 (World - Sat Mar 2 1996)
bgareggacn RA9503 Raizing/8ing Battle Garegga - Type 2 (China (and Denmark?) - Tue Apr 2 1996)
batrider RA9704 Raizing/8ing Armed Police Batrider (Europe - Fri Feb 13 1998)
batrideru RA9704 Raizing/8ing Armed Police Batrider (USA - Fri Feb 13 1998)
batriderc RA9704 Raizing/8ing Armed Police Batrider (China - Fri Feb 13 1998)
batriderj RA9704 Raizing/8ing Armed Police Batrider - B Version (Japan - Fri Feb 13 1998)
batriderk RA9704 Raizing/8ing Armed Police Batrider (Korea - Fri Feb 13 1998)
batriderja RA9704 Raizing/8ing Armed Police Batrider (Japan - Mon Dec 22 1997)
batridert RA9704 Raizing/8ing Armed Police Batrider (Taiwan - Mon Dec 22 1997)
bbakraid ET68-V99 8ing Battle Bakraid - Unlimited Version (USA - Tue Jun 8th, 1999)
bbakraidj ET68-V99 8ing Battle Bakraid - Unlimited Version (Japan - Tue Jun 8th, 1999)
bbakraidja ET68-V99 8ing Battle Bakraid (Japan - Wed Apr 7th, 1999)
SET NOTES:
ghox - The ghoxj set displays an English title screen when the jumpers are set for Japan/Taito,
and fails to display the "Winners Don't Use Drugs" logo when set for USA/Taito (either
Taito America or Taito Japan).
dogyuun - In the location test version, if you are hit while you have a bomb, the bomb explodes
automatically and saves you from dying. In the final released version, the bomb explodes
but you die anyway.
The only difference between the dogyuun and dogyuuna sets is some of the region jumper
settings; see the INPUT_PORTS definitions.
truxton2 - Although the truxton2 PCB has only standard JAMMA mono audio output, and uses a YM3014B
mono DAC, the YM2151 music is actually sequenced in stereo. In toaplan2.h, uncomment
"#define TRUXTON2_STEREO" to hear the game's music the way it was originally composed.
Difficulty is much lower when the region is set to Europe or USA than when set to any
Asian region, independent of the "Difficulty" dipswitches. See the code beginning at
1FE94 (RAM address 1002D6 contains 0 if region is an Asian region, 1 if Europe or USA)
grindstm - Code at 20A26 in vfive forces region to Japan. All sets have some NOPs at reset vector,
and the NEC V25 CPU test that the other games do is skipped. Furthermore, all sets have
a broken ROM checksum routine that reads address ranges that don't match the actual
location or size of the ROM, and that has a hack at the end so it always passes.
Normally you would expect to see code like this in a bootleg, but the NOPs and other
oddities are identical among three different sets.
batsugun - The Special Version has many changes to make the game easier: it adds an autofire button,
replaces the regular bomb with the more powerful double bomb (which in the original version
required both players in a two player game to press their bomb buttons at once), gives you
a shield that can absorb one hit each time your ship "levels up", etc. It also changes the
colors of the title screen, ship select screen, stages, and enemies.
batsugun compared to batsuguna has code that looks more like the Special Version, but it
doesn't have any of the Special Version features. All the differences between batsugun
and batsuguna look like bug fixes that were carried over into the Special Version.
sstriker - The mahoudai set reads the region jumpers, but the lookup tables in ROM that map jumper
settings to copyright text, coinage settings, etc., contain identical values for every
jumper setting, effectively ignoring the jumpers and forcing the region to Japan.
On the other hand, sstriker has its title screen and all its text in English even when
the region is set to Japan. This seems odd but has been verified correct on two boards.
The only difference between sstriker and sstrikera is the copyright text displayed when
the region is set to Korea.
kingdmgp - The kingdmgp and shippumd sets have identical program ROMs but a different graphics ROM
for the text layer. Setting the region to Japan with the kingdmgp ROM, or to anything other
than Japan with the shippumd ROM, results in a corrupt title screen and unreadable text.
In kingdmgp some of the tiles needed for the credits screen in attract mode have been
stripped out, resulting in boxes where letters should be. It doesn't seem very professional
but appears to be a genuine release. A lot of boards being sold as 'Kingdom Grand Prix' are
in fact conversions using Neill Corlett's hack.
bgaregga - The later versions change the small bullet-shaped enemy bullets to bright yellow balls,
eliminate the flying metal debris from explosions, and require additional joystick input
to access the Extended, Harder, Special, and Stage Edit hidden features.
In addition to these changes, the bgareggat2 set uses only two buttons. Instead of being
able to change the formation of your options with the third button, each of the selectable
ships has a different, fixed option formation. However, the third button can still be used
to select an alternate ship color and to enter the secret character and Stage Edit codes.
batrider - Batrider was marketed as a two button game, and the regular ships all use only the first
two buttons, but in the original version you need the third button in order to control the
options of the hidden Battle Garegga ships.
This problem was fixed in the B Version, which lets you change the Battle Garegga ships'
option formation using Street Fighter style joystick commands (as well as by using the third
button, if the cabinet has one)
bbakraid - Because players managed to counter stop the original Battle Bakraid not long after release,
the Unlimited Version, which can display more score digits, was released as a ROM upgrade.
The upgrade also fixes the bug in the original version that prevented the unlocking of
Team Edit mode from being saved in the EEPROM.
****************************************************************************
* Battle Garegga and Armed Police Batrider have secret characters *
* and game features. *
* Try to input the following commands to use them. *
* ======================================================================== *
* Battle Garegga *
* The button you use to select your ship not only determines its *
* color, but affects its characteristics. *
* A: Default characteristics. *
* B: Slightly higher speed than A type. *
* C: Slightly smaller hitbox than A type. *
* A+B+C: Same speed as B type and same hitbox as C type. *
* *
* After inserting a coin (pushing a credit button), input *
* UP UP DOWN DOWN LEFT RIGHT LEFT RIGHT A B C START *
* then you can use Mahou Daisakusen characters. *
* *
* Note: In versions of the game dated Mar 2 1996 or later, you must *
* hold the joystick RIGHT in addition to the specified button(s) *
* when entering any of the following commands. Even if Stage Edit *
* is enabled via dipswitch, you need to hold RIGHT to use it. *
* *
* EXTENDED: After inserting a coin, hold A and press START. *
* You play through all stages twice before the game ends. *
* HARDER: After inserting a coin, hold B and press START. *
* Difficulty is increased. *
* SPECIAL: After inserting a coin, hold A and B and press START. *
* Combination of EXTENDED and HARDER modes. *
* STAGE EDIT: After inserting a coin, hold C and press START. *
* You can choose what order to play Stage 2, 3 and 4 in, *
* or even skip them. *
* *
* EXTENDED, HARDER, and SPECIAL modes each have their own high score list. *
* ------------------------------------------------------------------------ *
* Armed Police Batrider *
* The button you use to select your ship not only determines its *
* color, but affects its characteristics. *
* A: High main shot power, low option shot power. *
* Average speed. Default autofire rate is 15 Hz. *
* B: Low main shot power, high option shot power. Slightly *
* slower than A type. Default autofire rate is 12 Hz. *
* C: High main shot and option shot power, but lowest speed. *
* Default autofire rate is 20 Hz. *
* START: Low main shot and option shot power, but highest speed. *
* Default autofire rate is 10 Hz. *
* *
* Note: The following features can also be enabled via dipswitches. *
* *
* PLAYER SELECT: After inserting a coin, input *
* UP UP DOWN DOWN LEFT RIGHT LEFT RIGHT B A *
* You can select a single character instead of a team. *
* GUEST PLAYERS: After inserting a coin, input *
* UP UP DOWN DOWN LEFT RIGHT LEFT RIGHT A B *
* You can use Mahou Daisakusen and Battle Garegga characters. *
* SPECIAL COURSE: After inserting a coin, input *
* UP DOWN UP DOWN LEFT RIGHT LEFT RIGHT A B *
* You can select the Special course, which consists of bosses only. *
* STAGE EDIT: When you select your course, press A and B simultaneously. *
* You can choose what order to play Stage 2, 3 and 4 in, *
* or even skip them. *
****************************************************************************
############################################################################
# In Battle Bakraid, the button you use to select your ship not only #
# determines its color, but affects its characteristics. #
# A: Increased main shot power. Default autofire rate is 20 Hz. #
# B: Increased bomb blast duration. Default autofire rate is 12 Hz. #
# C: Increased side shot power. Default autofire rate is 15 Hz. #
# START: Increased speed. Default autofire rate is 10 Hz. #
# #
# STAGE EDIT: When you select your course, press A and B simultaneously. #
# You can choose what order to play Stage 2, 3, 4 and 5 in, #
# or even skip them. Stage Edit can also be enabled via dipswitch. #
# ======================================================================== #
# Battle Bakraid has unlocking codes to gain access to extra players #
# and game features. Once each feature is unlocked, it is saved in EEPROM #
# and remains unlocked until you erase the EEPROM from the service mode. #
# However, in the original (non-Unlimited) version, the unlocking of #
# Team Edit is not saved in EEPROM, apparently due to a bug. #
# Special thanks go to the 'R8ZING Shooter Tribute' page for finding #
# and publishing this info. #
# ======================================================================== #
# PLAYER SELECT: PHASE 2 #
# Result: 3 more fighter planes available. #
# Code: UP UP DOWN DOWN LEFT RIGHT LEFT RIGHT A B Start #
# Conditions: #
# 1. Start from the title screen #
# 2. Insert Coin #
# 3. Watch the 20 sec. counter and enter each part of the code right #
# between the counting. #
# Example: 12,up,11,up,10,down,9,down,8,left,7,right,6.left,5,r.. #
# After entering the [B] button a chime should sound. Phase 2 unlocked! #
# ------------------------------------------------------------------------ #
# PLAYER SELECT: PHASE 3 #
# Result: 2 more fighter planes available. #
# Code: UP UP DOWN DOWN LEFT RIGHT LEFT RIGHT B A Start #
# Conditions: #
# 1. Unlock Player Select Phase 2 first #
# 2. Insert Coin #
# 3. Watch the 20 sec. counter and enter each part of the code right #
# between the counting. #
# Important: The entering of this code has to be finished before the #
# counter passes 10 ! To do so, you will have to start after coin #
# insertion, right before it starts to count: #
# Example: up,19,up,18,down,17,down,16,left,15,right,14.left,.. #
# After entering the [A] button a chime should sound. Phase 3 unlocked! #
# ------------------------------------------------------------------------ #
# TEAM EDIT: ENABLE #
# Result: Unlocks the 'team edit' feature to select a team of different #
# ships like in Batrider. #
# Code: UP DOWN UP DOWN LEFT RIGHT LEFT RIGHT A B Start #
# Conditions: #
# 1. Unlock Player Select Phase 2 and Phase 3 first #
# 2. Insert Coin #
# 3. Watch the 20 sec. counter and enter each part of the code right #
# between the counting. #
# Important: This code hast to be entered so that the counter is at 0 when #
# you press the final button [B]. To do so, start after second 9: #
# Example: 9,up,8,down,7,up,6,down,5,left,4,right,3,left,2,right,1,A,0,B #
# After entering the [B] button a chime should sound. Team edit unlocked! #
# #
# Note: In the Japan version, to use Team Edit after unlocking it, #
# you must hold UP or DOWN while selecting your course. #
# In the USA version, if Team Edit is unlocked, the game asks you #
# if you want to use it after you select your course. #
# ------------------------------------------------------------------------ #
# SPECIAL COURSE: ENABLE #
# Result: Unlocks the Special course, a game mode where you fight the #
# bosses only. #
# Code: UP DOWN UP DOWN LEFT RIGHT LEFT RIGHT B A Start #
# Conditions: #
# 1. Start from the title screen #
# 2. Hold [C] button #
# 3. Insert Coin #
# 4. Watch the 20 sec. counter and enter each part of the code right #
# between the counting. #
# 5. Release [C] button #
# After entering the [A] button a chime should sound. Special course #
# unlocked! #
############################################################################
*************** Hardware Info ***************
CPU:
MC68000P10
TMP68HC000N-16
Sound CPU/MCU:
HD647180X0FS6 (Hitachi Z180 Compatible CPU with internal 16k ROM)
Z84C0006PEC (Z80)
NEC V25
Sound Chips:
YM3812 + YM3014B (DAC)
YM2151 + YM3014B
YM2151 + YM3014B + M6295
YM2151 + YM3012 (DAC) + M6295 + M6295
YMZ280B-F + YAC516-E (DAC)
Graphics Custom 208pin QFP:
GP9001 L7A0498 TOA PLAN
(emulated in video/gp9001.c)
*********************************************************************
Game status:
Teki Paki Working, but no sound. Missing sound MCU dump. Chip is protected. It's a QFP80 Hitachi HD647180.
Ghox Working, but no sound. Missing sound MCU dump. It's a QFP80 Hitachi HD647180.
Dogyuun Working. MCU type is a NEC V25. Chip is a PLCC94 stamped 'TS-002-MACH'.*
Knuckle Bash Working. MCU type is a NEC V25. Chip is a PLCC94 stamped 'TS-004-DASH'.*
Truxton 2 Working.
Pipi & Bibis Working.
Pipi & Bibis (Teki Paki h/w) Working, but no sound. Missing sound MCU dump. It's a Hitachi HD647180.
Pipi & Bibis bootleg Working. One unknown ROM.
FixEight Working. MCU type is a NEC V25. Chip is a PLCC94 stamped 'TS-001-TURBO'
FixEight bootleg Working. One unknown ROM (same as pipibibs bootleg one). Region hardcoded to Korea (@ $4d8)
Grind Stormer / VFive Working. MCU type is a NEC V25. Chip is a PLCC94 stamped 'TS-007-SPY'.*
Batsugun / Batsugun Sp' Working. MCU type is a NEC V25. Chip is a PLCC94 stamped 'TS-007-SPY'.*
Snow Bros. 2 Working.
Mahou Daisakusen Working.
Shippu Mahou Daisakusen Working.
Battle Garegga Working.
Armed Police Batrider Working.
Battle Bakraid Working.
* Some PCBs use another version stamped 'NITRO' which is the same chip type.
MACH, DASH and SPY seem to be the same chip (same encryption table)
Batsugun has the CPU hooked up in non-encrypted mode.
Notes:
See Input Port definition header below, for instructions
on how to enter pause/slow motion modes.
To Do / Unknowns:
- Whoopee/Teki Paki sometimes tests bit 5 of the region jumper port
just after testing for vblank. Why?
- Priority problem on 2nd player side of selection screen in Fixeight bootleg.
- Fixeight bootleg text in sound check mode does not display properly
with the CPU set to 10MHz (ok at 16MHz). Possible error in video_count_r routine.
- Need to sort out the video status register.
- Find out how exactly how sound CPU communication really works in bgaregga/batrider/bbakraid
current emulation seems to work (plays all sounds), but there are still some unknown reads/writes
- Write a RTC core for uPD4992, needed by Othello Derby and Power Kick
*****************************************************************************/
#include "emu.h"
#include "cpu/nec/v25.h"
#include "cpu/z80/z80.h"
#include "cpu/z180/z180.h"
#include "sound/2151intf.h"
#include "sound/3812intf.h"
#include "sound/ymz280b.h"
#include "includes/toaplan2.h"
#include "includes/toaplipt.h"
/***************************************************************************
Initialisation handlers
***************************************************************************/
MACHINE_START_MEMBER(toaplan2_state,toaplan2)
{
save_item(NAME(m_mcu_data));
save_item(NAME(m_old_p1_paddle_h));
save_item(NAME(m_old_p2_paddle_h));
save_item(NAME(m_z80_busreq));
}
WRITE_LINE_MEMBER(toaplan2_state::toaplan2_reset)
{
if (m_audiocpu != nullptr)
m_audiocpu->set_input_line(INPUT_LINE_RESET, PULSE_LINE);
}
MACHINE_RESET_MEMBER(toaplan2_state,toaplan2)
{
m_mcu_data = 0x00;
// All games execute a RESET instruction on init, presumably to reset the sound CPU.
// This is important for games with common RAM; the RAM test will fail
// when leaving service mode if the sound CPU is not reset.
m_maincpu->set_reset_callback(write_line_delegate(FUNC(toaplan2_state::toaplan2_reset),this));
}
MACHINE_RESET_MEMBER(toaplan2_state,ghox)
{
MACHINE_RESET_CALL_MEMBER(toaplan2);
m_old_p1_paddle_h = 0;
m_old_p2_paddle_h = 0;
}
DRIVER_INIT_MEMBER(toaplan2_state,dogyuun)
{
m_v25_reset_line = 0x20;
}
DRIVER_INIT_MEMBER(toaplan2_state,fixeight)
{
m_v25_reset_line = 0x08;
}
DRIVER_INIT_MEMBER(toaplan2_state,fixeightbl)
{
UINT8 *ROM = memregion("oki")->base();
membank("bank1")->configure_entries(0, 5, &ROM[0x30000], 0x10000);
}
DRIVER_INIT_MEMBER(toaplan2_state,vfive)
{
m_v25_reset_line = 0x10;
}
DRIVER_INIT_MEMBER(toaplan2_state,pipibibsbl)
{
UINT16 *ROM = (UINT16 *)(memregion("maincpu")->base());
for (int i = 0; i < (0x040000/2); i += 4)
{
ROM[i+0] = BITSWAP16(ROM[i+0],0x1,0x5,0x6,0x7,0x8,0x2,0x0,0x9,0xe,0xd,0x4,0x3,0xf,0xa,0xb,0xc);
ROM[i+1] = BITSWAP16(ROM[i+1],0x5,0x3,0x1,0xf,0xd,0xb,0x9,0x0,0x2,0x4,0x6,0x8,0xa,0xc,0xe,0x7);
ROM[i+2] = BITSWAP16(ROM[i+2],0xc,0xd,0xe,0xf,0x8,0x9,0xa,0xb,0x3,0x2,0x1,0x0,0x7,0x6,0x5,0x4);
ROM[i+3] = BITSWAP16(ROM[i+3],0x8,0x9,0xa,0xb,0xc,0xd,0xe,0xf,0x3,0x2,0x1,0x0,0x7,0x6,0x5,0x4);
}
}
DRIVER_INIT_MEMBER(toaplan2_state,bgaregga)
{
UINT8 *Z80 = memregion("audiocpu")->base();
// seems to only use banks 0x0a to 0x0f
membank("bank1")->configure_entries(8, 8, Z80, 0x4000);
}
DRIVER_INIT_MEMBER(toaplan2_state,batrider)
{
UINT8 *Z80 = memregion("audiocpu")->base();
membank("bank1")->configure_entries(0, 16, Z80, 0x4000);
m_sndirq_line = 4;
}
DRIVER_INIT_MEMBER(toaplan2_state,bbakraid)
{
m_sndirq_line = 2;
}
/***************************************************************************
Toaplan games
***************************************************************************/
void toaplan2_state::device_timer(emu_timer &timer, device_timer_id id, int param, void *ptr)
{
switch (id)
{
case TIMER_RAISE_IRQ:
m_maincpu->set_input_line(param, HOLD_LINE);
break;
default:
assert_always(FALSE, "Unknown id in toaplan2_state::device_timer");
}
}
void toaplan2_state::toaplan2_vblank_irq(int irq_line)
{
// the IRQ appears to fire at line 0xe6
timer_set(m_screen->time_until_pos(0xe6), TIMER_RAISE_IRQ, irq_line);
}
INTERRUPT_GEN_MEMBER(toaplan2_state::toaplan2_vblank_irq1){ toaplan2_vblank_irq(1); }
INTERRUPT_GEN_MEMBER(toaplan2_state::toaplan2_vblank_irq2){ toaplan2_vblank_irq(2); }
INTERRUPT_GEN_MEMBER(toaplan2_state::toaplan2_vblank_irq4){ toaplan2_vblank_irq(4); }
READ16_MEMBER(toaplan2_state::video_count_r)
{
/* +---------+---------+--------+---------------------------+ */
/* | /H-Sync | /V-Sync | /Blank | Scanline Count | */
/* | Bit 15 | Bit 14 | Bit 8 | Bit 7-0 (count from #EF) | */
/* +---------+---------+--------+---------------------------+ */
/*************** Control Signals are active low ***************/
int hpos = m_screen->hpos();
int vpos = m_screen->vpos();
int video_status = 0xff00; // Set signals inactive
vpos = (vpos + 15) % 262;
bool hblank, vblank;
hblank = (hpos > 325) && (hpos < 380);
vblank = (vpos >= 247) && (vpos <= 250);
if (hblank)
video_status &= ~0x8000;
if (vblank)
video_status &= ~0x4000;
if (vblank || hblank) // ?? Dogyuun is too slow if this is wrong
video_status &= ~0x0100;
if (vpos < 256)
video_status |= (vpos & 0xff);
else
video_status |= 0xff;
// logerror("VC: vpos=%04x hpos=%04x VBL=%04x\n",vpos,hpos,m_screen->vblank());
return video_status;
}
WRITE8_MEMBER(toaplan2_state::toaplan2_coin_w)
{
/* +----------------+------ Bits 7-5 not used ------+--------------+ */
/* | Coin Lockout 2 | Coin Lockout 1 | Coin Count 2 | Coin Count 1 | */
/* | Bit 3 | Bit 2 | Bit 1 | Bit 0 | */
if (data & 0x0f)
{
machine().bookkeeping().coin_lockout_w(0, ((data & 4) ? 0 : 1) );
machine().bookkeeping().coin_lockout_w(1, ((data & 8) ? 0 : 1) );
machine().bookkeeping().coin_counter_w(0, (data & 1) );
machine().bookkeeping().coin_counter_w(1, (data & 2) );
}
else
{
machine().bookkeeping().coin_lockout_global_w(1); // Lock all coin slots
}
if (data & 0xe0)
{
logerror("Writing unknown upper bits (%02x) to coin control\n",data);
}
}
WRITE8_MEMBER(toaplan2_state::pwrkick_coin_w)
{
machine().bookkeeping().coin_counter_w(0, (data & 2) >> 1 );
machine().bookkeeping().coin_counter_w(1, (data & 8) >> 3 );
m_pwrkick_hopper = (data & 0x80) >> 7;
}
WRITE16_MEMBER(toaplan2_state::toaplan2_coin_word_w)
{
if (ACCESSING_BITS_0_7)
{
toaplan2_coin_w(space, offset, data & 0xff);
}
if (ACCESSING_BITS_8_15 && (data & 0xff00) )
{
logerror("Writing unknown upper MSB command (%04x) to coin control\n",data & 0xff00);
}
}
WRITE16_MEMBER(toaplan2_state::toaplan2_v25_coin_word_w)
{
logerror("toaplan2_v25_coin_word_w %04x\n",data);
if (ACCESSING_BITS_0_7)
{
toaplan2_coin_w(space, offset, data & 0x0f);
m_audiocpu->set_input_line(INPUT_LINE_RESET, (data & m_v25_reset_line) ? CLEAR_LINE : ASSERT_LINE);
}
if (ACCESSING_BITS_8_15 && (data & 0xff00) )
{
logerror("Writing unknown upper MSB command (%04x) to coin control\n",data & 0xff00);
}
}
WRITE16_MEMBER(toaplan2_state::shippumd_coin_word_w)
{
if (ACCESSING_BITS_0_7)
{
toaplan2_coin_w(space, offset, data & 0xff);
m_oki->set_bank_base(((data & 0x10) >> 4) * 0x40000);
}
if (ACCESSING_BITS_8_15 && (data & 0xff00) )
{
logerror("Writing unknown upper MSB command (%04x) to coin control\n",data & 0xff00);
}
}
READ16_MEMBER(toaplan2_state::shared_ram_r)
{
return m_shared_ram[offset];
}
WRITE16_MEMBER(toaplan2_state::shared_ram_w)
{
if (ACCESSING_BITS_0_7)
{
m_shared_ram[offset] = data;
}
}
WRITE16_MEMBER(toaplan2_state::toaplan2_hd647180_cpu_w)
{
// Command sent to secondary CPU. Support for HD647180 will be
// required when a ROM dump becomes available for this hardware
if (ACCESSING_BITS_0_7)
{
m_mcu_data = data & 0xff;
logerror("PC:%08x Writing command (%04x) to secondary CPU shared port\n", space.device().safe_pcbase(), m_mcu_data);
}
}
CUSTOM_INPUT_MEMBER(toaplan2_state::c2map_r)
{
// For Teki Paki hardware
// bit 4 high signifies secondary CPU is ready
// bit 5 is tested low before V-Blank bit ???
m_mcu_data = 0xff;
return (m_mcu_data == 0xff) ? 0x01 : 0x00;
}
READ16_MEMBER(toaplan2_state::ghox_p1_h_analog_r)
{
INT8 value, new_value;
new_value = ioport("PAD1")->read();
if (new_value == m_old_p1_paddle_h) return 0;
value = new_value - m_old_p1_paddle_h;
m_old_p1_paddle_h = new_value;
return value;
}
READ16_MEMBER(toaplan2_state::ghox_p2_h_analog_r)
{
INT8 value, new_value;
new_value = ioport("PAD2")->read();
if (new_value == m_old_p2_paddle_h) return 0;
value = new_value - m_old_p2_paddle_h;
m_old_p2_paddle_h = new_value;
return value;
}
READ16_MEMBER(toaplan2_state::ghox_mcu_r)
{
return 0xff;
}
WRITE16_MEMBER(toaplan2_state::ghox_mcu_w)
{
if (ACCESSING_BITS_0_7)
{
data &= 0xff;
m_mcu_data = data;
if ((data >= 0xd0) && (data < 0xe0))
{
offset = ((data & 0x0f) * 2) + (0x38 / 2);
m_shared_ram16[offset ] = 0x0005; // Return address for
m_shared_ram16[offset-1] = 0x0056; // RTS instruction
}
else
{
logerror("PC:%08x Writing %08x to HD647180 cpu shared ram status port\n", space.device().safe_pcbase(), m_mcu_data);
}
m_shared_ram16[0x56 / 2] = 0x004e; // Return a RTS instruction
m_shared_ram16[0x58 / 2] = 0x0075;
if (data == 0xd3)
{
m_shared_ram16[0x56 / 2] = 0x003a; // move.w d1,d5
m_shared_ram16[0x58 / 2] = 0x0001;
m_shared_ram16[0x5a / 2] = 0x0008; // bclr.b #0,d5
m_shared_ram16[0x5c / 2] = 0x0085;
m_shared_ram16[0x5e / 2] = 0x0000;
m_shared_ram16[0x60 / 2] = 0x0000;
m_shared_ram16[0x62 / 2] = 0x00cb; // muls.w #3,d5
m_shared_ram16[0x64 / 2] = 0x00fc;
m_shared_ram16[0x66 / 2] = 0x0000;
m_shared_ram16[0x68 / 2] = 0x0003;
m_shared_ram16[0x6a / 2] = 0x0090; // sub.w d5,d0
m_shared_ram16[0x6c / 2] = 0x0045;
m_shared_ram16[0x6e / 2] = 0x00e5; // lsl.b #2,d1
m_shared_ram16[0x70 / 2] = 0x0009;
m_shared_ram16[0x72 / 2] = 0x004e; // rts
m_shared_ram16[0x74 / 2] = 0x0075;
}
}
}
READ16_MEMBER(toaplan2_state::ghox_shared_ram_r)
{
// Ghox 68K reads data from MCU shared RAM and writes it to main RAM.
// It then subroutine jumps to main RAM and executes this code.
// Here, we're just returning a RTS instruction for now.
// See above ghox_mcu_w routine.
// Offset $56 and $58 are accessed from around PC:0F814
// Offset $38 and $36 are accessed from around PC:0DA7C
// Offset $3c and $3a are accessed from around PC:02E3C
// Offset $40 and $3E are accessed from around PC:103EE
// Offset $44 and $42 are accessed from around PC:0FB52
// Offset $48 and $46 are accessed from around PC:06776
return m_shared_ram16[offset] & 0xff;
}
WRITE16_MEMBER(toaplan2_state::ghox_shared_ram_w)
{
if (ACCESSING_BITS_0_7)
{
m_shared_ram16[offset] = data & 0xff;
}
}
WRITE16_MEMBER(toaplan2_state::fixeight_subcpu_ctrl_w)
{
m_audiocpu->set_input_line(INPUT_LINE_RESET, (data & m_v25_reset_line) ? CLEAR_LINE : ASSERT_LINE);
}
WRITE16_MEMBER(toaplan2_state::oki_bankswitch_w)
{
if (ACCESSING_BITS_0_7)
{
m_oki->set_bank_base((data & 1) * 0x40000);
}
}
WRITE16_MEMBER(toaplan2_state::oki1_bankswitch_w)
{
if (ACCESSING_BITS_0_7)
{
m_oki1->set_bank_base((data & 1) * 0x40000);
}
}
WRITE16_MEMBER(toaplan2_state::fixeightbl_oki_bankswitch_w)
{
if (ACCESSING_BITS_0_7)
{
data &= 7;
if (data <= 4) membank("bank1")->set_entry(data);
}
}
READ8_MEMBER(toaplan2_state::fixeight_region_r)
{
// this must match the eeprom region!
// however on the real PCB any of the EEPROMs we have work without any special treatment
// so is there a decryption error causing this to happen, or should this be read back
// from somewhere else?
if (!strcmp(machine().system().name,"fixeightkt")) return 0x00;
if (!strcmp(machine().system().name,"fixeightk")) return 0x01;
if (!strcmp(machine().system().name,"fixeightht")) return 0x02;
if (!strcmp(machine().system().name,"fixeighth")) return 0x03;
if (!strcmp(machine().system().name,"fixeighttwt")) return 0x04;
if (!strcmp(machine().system().name,"fixeighttw")) return 0x05;
if (!strcmp(machine().system().name,"fixeightat")) return 0x06;
if (!strcmp(machine().system().name,"fixeighta")) return 0x07;
if (!strcmp(machine().system().name,"fixeightt")) return 0x08;
if (!strcmp(machine().system().name,"fixeight9")) return 0x09;
if (!strcmp(machine().system().name,"fixeighta")) return 0x0a;
if (!strcmp(machine().system().name,"fixeightu")) return 0x0b;
// if (!strcmp(machine().system().name,"fixeightc")) return 0x0c; // invalid
// if (!strcmp(machine().system().name,"fixeightd")) return 0x0d; // invalid
if (!strcmp(machine().system().name,"fixeightj")) return 0x0e;
if (!strcmp(machine().system().name,"fixeightjt")) return 0x0f;
return 0x00;
}
/***************************************************************************
Raizing games
***************************************************************************/
WRITE8_MEMBER(toaplan2_state::raizing_z80_bankswitch_w)
{
membank("bank1")->set_entry(data & 0x0f);
}
// bgaregga and batrider don't actually have a NMK112, but rather a GAL
// programmed to bankswitch the sound ROMs in a similar fashion.
// it may not be a coincidence that the composer and sound designer for
// these two games, Manabu "Santaruru" Namiki, came to Raizing from NMK...
WRITE8_MEMBER(toaplan2_state::raizing_oki_bankswitch_w)
{
m_nmk112->okibank_w(space, offset, data & 0x0f);
m_nmk112->okibank_w(space, offset + 1, (data >> 4) & 0x0f);
}
WRITE16_MEMBER(toaplan2_state::bgaregga_soundlatch_w)
{
if (ACCESSING_BITS_0_7)
{
m_soundlatch->write(space, offset, data & 0xff);
m_audiocpu->set_input_line(0, HOLD_LINE);
}
}
READ8_MEMBER(toaplan2_state::bgaregga_E01D_r)
{
// the Z80 reads this address during its IRQ routine,
// and reads the soundlatch only if the lowest bit is clear.
return 0;
}
WRITE8_MEMBER(toaplan2_state::bgaregga_E00C_w)
{
// the Z80 writes here after reading the soundlatch.
// I would think that this was an acknowledge latch like
// batrider and bbakraid have, except that on the 68000 side
// there's no corresponding read...
}
READ16_MEMBER(toaplan2_state::batrider_z80_busack_r)
{
// Bit 0x01 returns the status of BUSAK from the Z80.
// These accesses are made when the 68K wants to read the Z80
// ROM code. Failure to return the correct status incurrs a Sound Error.
return m_z80_busreq; // Loop BUSRQ to BUSAK
}
WRITE16_MEMBER(toaplan2_state::batrider_z80_busreq_w)
{
if (ACCESSING_BITS_0_7)
{
m_z80_busreq = (data & 0x01); // see batrider_z80_busack_r above
}
}
READ16_MEMBER(toaplan2_state::batrider_z80rom_r)
{
UINT8 *Z80 = memregion("audiocpu")->base();
return Z80[offset];
}
// these two latches are always written together, via a single move.l instruction
WRITE16_MEMBER(toaplan2_state::batrider_soundlatch_w)
{
if (ACCESSING_BITS_0_7)
{
m_soundlatch->write(space, offset, data & 0xff);
m_audiocpu->set_input_line(INPUT_LINE_NMI, ASSERT_LINE);
}
}
WRITE16_MEMBER(toaplan2_state::batrider_soundlatch2_w)
{
if (ACCESSING_BITS_0_7)
{
m_soundlatch2->write(space, offset, data & 0xff);
m_audiocpu->set_input_line(INPUT_LINE_NMI, ASSERT_LINE);
}
}
WRITE16_MEMBER(toaplan2_state::batrider_unknown_sound_w)
{
// the 68K writes here when it wants a sound acknowledge IRQ from the Z80
// for bbakraid this is on every sound command; for batrider, only on certain commands
}
WRITE16_MEMBER(toaplan2_state::batrider_clear_sndirq_w)
{
// not sure whether this is correct
// the 68K writes here during the sound IRQ handler, and nowhere else...
m_maincpu->set_input_line(m_sndirq_line, CLEAR_LINE);
}
WRITE8_MEMBER(toaplan2_state::batrider_sndirq_w)
{
// if batrider_clear_sndirq_w() is correct, should this be ASSERT_LINE?
m_maincpu->set_input_line(m_sndirq_line, HOLD_LINE);
}
WRITE8_MEMBER(toaplan2_state::batrider_clear_nmi_w)
{
m_audiocpu->set_input_line(INPUT_LINE_NMI, CLEAR_LINE);
}
READ16_MEMBER(toaplan2_state::bbakraid_eeprom_r)
{
// Bit 0x01 returns the status of BUSAK from the Z80.
// BUSRQ is activated via bit 0x10 on the EEPROM write port.
// These accesses are made when the 68K wants to read the Z80
// ROM code. Failure to return the correct status incurrs a Sound Error.
int data;
data = ((m_eeprom->do_read() & 0x01) << 4);
data |= ((m_z80_busreq >> 4) & 0x01); // Loop BUSRQ to BUSAK
return data;
}
WRITE16_MEMBER(toaplan2_state::bbakraid_eeprom_w)
{
if (data & ~0x001f)
logerror("CPU #0 PC:%06X - Unknown EEPROM data being written %04X\n",space.device().safe_pc(),data);
if ( ACCESSING_BITS_0_7 )
ioport("EEPROMOUT")->write(data, 0xff);
m_z80_busreq = data & 0x10; // see bbakraid_eeprom_r above
}
INTERRUPT_GEN_MEMBER(toaplan2_state::bbakraid_snd_interrupt)
{
device.execute().set_input_line(0, HOLD_LINE);
}
static ADDRESS_MAP_START( tekipaki_68k_mem, AS_PROGRAM, 16, toaplan2_state )
AM_RANGE(0x000000, 0x01ffff) AM_ROM
AM_RANGE(0x020000, 0x03ffff) AM_ROM // extra for Whoopee
AM_RANGE(0x080000, 0x082fff) AM_RAM
AM_RANGE(0x0c0000, 0x0c0fff) AM_RAM_DEVWRITE("palette", palette_device, write) AM_SHARE("palette")
AM_RANGE(0x140000, 0x14000d) AM_DEVREADWRITE("gp9001", gp9001vdp_device, gp9001_vdp_r, gp9001_vdp_w)
AM_RANGE(0x180000, 0x180001) AM_READ_PORT("DSWA")
AM_RANGE(0x180010, 0x180011) AM_READ_PORT("DSWB")
AM_RANGE(0x180020, 0x180021) AM_READ_PORT("SYS")
AM_RANGE(0x180030, 0x180031) AM_READ_PORT("JMPR") // CPU 2 busy and Region Jumper block
AM_RANGE(0x180040, 0x180041) AM_WRITE(toaplan2_coin_word_w)
AM_RANGE(0x180050, 0x180051) AM_READ_PORT("IN1")
AM_RANGE(0x180060, 0x180061) AM_READ_PORT("IN2")
AM_RANGE(0x180070, 0x180071) AM_WRITE(toaplan2_hd647180_cpu_w)
ADDRESS_MAP_END
static ADDRESS_MAP_START( ghox_68k_mem, AS_PROGRAM, 16, toaplan2_state )
AM_RANGE(0x000000, 0x03ffff) AM_ROM
AM_RANGE(0x040000, 0x040001) AM_READ(ghox_p2_h_analog_r)
AM_RANGE(0x080000, 0x083fff) AM_RAM
AM_RANGE(0x0c0000, 0x0c0fff) AM_RAM_DEVWRITE("palette", palette_device, write) AM_SHARE("palette")
AM_RANGE(0x100000, 0x100001) AM_READ(ghox_p1_h_analog_r)
AM_RANGE(0x140000, 0x14000d) AM_DEVREADWRITE("gp9001", gp9001vdp_device, gp9001_vdp_r, gp9001_vdp_w)
AM_RANGE(0x180000, 0x180001) AM_READWRITE(ghox_mcu_r, ghox_mcu_w) // really part of shared RAM
AM_RANGE(0x180006, 0x180007) AM_READ_PORT("DSWA")
AM_RANGE(0x180008, 0x180009) AM_READ_PORT("DSWB")
AM_RANGE(0x180010, 0x180011) AM_READ_PORT("SYS")
AM_RANGE(0x18000c, 0x18000d) AM_READ_PORT("IN1")
AM_RANGE(0x18000e, 0x18000f) AM_READ_PORT("IN2")
AM_RANGE(0x180500, 0x180fff) AM_READWRITE(ghox_shared_ram_r, ghox_shared_ram_w) AM_SHARE("shared_ram16")
AM_RANGE(0x181000, 0x181001) AM_WRITE(toaplan2_coin_word_w)
AM_RANGE(0x18100c, 0x18100d) AM_READ_PORT("JMPR")
ADDRESS_MAP_END
static ADDRESS_MAP_START( dogyuun_68k_mem, AS_PROGRAM, 16, toaplan2_state )
AM_RANGE(0x000000, 0x07ffff) AM_ROM
AM_RANGE(0x100000, 0x103fff) AM_RAM
AM_RANGE(0x200010, 0x200011) AM_READ_PORT("IN1")
AM_RANGE(0x200014, 0x200015) AM_READ_PORT("IN2")
AM_RANGE(0x200018, 0x200019) AM_READ_PORT("SYS")
AM_RANGE(0x20001c, 0x20001d) AM_WRITE(toaplan2_v25_coin_word_w) // Coin count/lock + v25 reset line
AM_RANGE(0x210000, 0x21ffff) AM_READWRITE(shared_ram_r, shared_ram_w )
AM_RANGE(0x300000, 0x30000d) AM_DEVREADWRITE("gp9001", gp9001vdp_device, gp9001_vdp_r, gp9001_vdp_w)
AM_RANGE(0x400000, 0x400fff) AM_RAM_DEVWRITE("palette", palette_device, write) AM_SHARE("palette")
AM_RANGE(0x500000, 0x50000d) AM_DEVREADWRITE("gp9001_1", gp9001vdp_device, gp9001_vdp_r, gp9001_vdp_w)
AM_RANGE(0x700000, 0x700001) AM_READ(video_count_r) // test bit 8
ADDRESS_MAP_END
static ADDRESS_MAP_START( kbash_68k_mem, AS_PROGRAM, 16, toaplan2_state )
AM_RANGE(0x000000, 0x07ffff) AM_ROM
AM_RANGE(0x100000, 0x103fff) AM_RAM
AM_RANGE(0x200000, 0x200fff) AM_READWRITE(shared_ram_r, shared_ram_w )
AM_RANGE(0x208010, 0x208011) AM_READ_PORT("IN1")
AM_RANGE(0x208014, 0x208015) AM_READ_PORT("IN2")
AM_RANGE(0x208018, 0x208019) AM_READ_PORT("SYS")
AM_RANGE(0x20801c, 0x20801d) AM_WRITE(toaplan2_coin_word_w)
AM_RANGE(0x300000, 0x30000d) AM_DEVREADWRITE("gp9001", gp9001vdp_device, gp9001_vdp_r, gp9001_vdp_w)
AM_RANGE(0x400000, 0x400fff) AM_RAM_DEVWRITE("palette", palette_device, write) AM_SHARE("palette")
AM_RANGE(0x700000, 0x700001) AM_READ(video_count_r) // test bit 8
ADDRESS_MAP_END
static ADDRESS_MAP_START( kbash2_68k_mem, AS_PROGRAM, 16, toaplan2_state )
AM_RANGE(0x000000, 0x07ffff) AM_ROM
AM_RANGE(0x100000, 0x103fff) AM_RAM
AM_RANGE(0x104000, 0x10401f) AM_RAM // Sound related?
AM_RANGE(0x200000, 0x200001) AM_NOP // Left over from original code - Sound Number write, Status read
AM_RANGE(0x200002, 0x200003) AM_WRITENOP // Left over from original code - Reset Sound
AM_RANGE(0x200004, 0x200005) AM_READ_PORT("DSWA")
AM_RANGE(0x200008, 0x200009) AM_READ_PORT("DSWB")
AM_RANGE(0x20000c, 0x20000d) AM_READ_PORT("JMPR")
AM_RANGE(0x200010, 0x200011) AM_READ_PORT("IN1")
AM_RANGE(0x200014, 0x200015) AM_READ_PORT("IN2")
AM_RANGE(0x200018, 0x200019) AM_READ_PORT("SYS")
AM_RANGE(0x200020, 0x200021) AM_DEVREADWRITE8("oki2", okim6295_device, read, write, 0x00ff)
AM_RANGE(0x200024, 0x200025) AM_DEVREADWRITE8("oki1", okim6295_device, read, write, 0x00ff)
AM_RANGE(0x200028, 0x200029) AM_WRITE(oki1_bankswitch_w)
AM_RANGE(0x20002c, 0x20002d) AM_READ(video_count_r)
AM_RANGE(0x300000, 0x30000d) AM_DEVREADWRITE("gp9001", gp9001vdp_device, gp9001_vdp_r, gp9001_vdp_w)
AM_RANGE(0x400000, 0x400fff) AM_RAM_DEVWRITE("palette", palette_device, write) AM_SHARE("palette")
ADDRESS_MAP_END
static ADDRESS_MAP_START( truxton2_68k_mem, AS_PROGRAM, 16, toaplan2_state )
AM_RANGE(0x000000, 0x07ffff) AM_ROM
AM_RANGE(0x100000, 0x10ffff) AM_RAM
AM_RANGE(0x200000, 0x20000d) AM_DEVREADWRITE("gp9001", gp9001vdp_device, gp9001_vdp_r, gp9001_vdp_w)
AM_RANGE(0x300000, 0x300fff) AM_RAM_DEVWRITE("palette", palette_device, write) AM_SHARE("palette")
AM_RANGE(0x400000, 0x401fff) AM_RAM_WRITE(toaplan2_tx_videoram_w) AM_SHARE("tx_videoram")
AM_RANGE(0x402000, 0x402fff) AM_RAM AM_SHARE("tx_lineselect")
AM_RANGE(0x403000, 0x4031ff) AM_RAM_WRITE(toaplan2_tx_linescroll_w) AM_SHARE("tx_linescroll")
AM_RANGE(0x403200, 0x403fff) AM_RAM
AM_RANGE(0x500000, 0x50ffff) AM_RAM_WRITE(toaplan2_tx_gfxram16_w) AM_SHARE("tx_gfxram16")
AM_RANGE(0x600000, 0x600001) AM_READ(video_count_r)
AM_RANGE(0x700000, 0x700001) AM_READ_PORT("DSWA")
AM_RANGE(0x700002, 0x700003) AM_READ_PORT("DSWB")
AM_RANGE(0x700004, 0x700005) AM_READ_PORT("JMPR")
AM_RANGE(0x700006, 0x700007) AM_READ_PORT("IN1")
AM_RANGE(0x700008, 0x700009) AM_READ_PORT("IN2")
AM_RANGE(0x70000a, 0x70000b) AM_READ_PORT("SYS")
AM_RANGE(0x700010, 0x700011) AM_DEVREADWRITE8("oki", okim6295_device, read, write, 0x00ff)
AM_RANGE(0x700014, 0x700017) AM_DEVREADWRITE8("ymsnd", ym2151_device, read, write, 0x00ff)
AM_RANGE(0x70001e, 0x70001f) AM_WRITE(toaplan2_coin_word_w)
ADDRESS_MAP_END
static ADDRESS_MAP_START( pipibibs_68k_mem, AS_PROGRAM, 16, toaplan2_state )
AM_RANGE(0x000000, 0x03ffff) AM_ROM
AM_RANGE(0x080000, 0x082fff) AM_RAM
AM_RANGE(0x0c0000, 0x0c0fff) AM_RAM_DEVWRITE("palette", palette_device, write) AM_SHARE("palette")
AM_RANGE(0x140000, 0x14000d) AM_DEVREADWRITE("gp9001", gp9001vdp_device, gp9001_vdp_r, gp9001_vdp_w)
AM_RANGE(0x190000, 0x190fff) AM_READWRITE(shared_ram_r, shared_ram_w)
AM_RANGE(0x19c01c, 0x19c01d) AM_WRITE(toaplan2_coin_word_w)
AM_RANGE(0x19c020, 0x19c021) AM_READ_PORT("DSWA")
AM_RANGE(0x19c024, 0x19c025) AM_READ_PORT("DSWB")
AM_RANGE(0x19c028, 0x19c029) AM_READ_PORT("JMPR")
AM_RANGE(0x19c02c, 0x19c02d) AM_READ_PORT("SYS")
AM_RANGE(0x19c030, 0x19c031) AM_READ_PORT("IN1")
AM_RANGE(0x19c034, 0x19c035) AM_READ_PORT("IN2")
ADDRESS_MAP_END
// odd scroll registers
static ADDRESS_MAP_START( pipibibi_bootleg_68k_mem, AS_PROGRAM, 16, toaplan2_state )
AM_RANGE(0x000000, 0x03ffff) AM_ROM
AM_RANGE(0x080000, 0x082fff) AM_RAM
AM_RANGE(0x083000, 0x0837ff) AM_DEVREADWRITE("gp9001", gp9001vdp_device, pipibibi_bootleg_spriteram16_r, pipibibi_bootleg_spriteram16_w) // SpriteRAM
AM_RANGE(0x083800, 0x087fff) AM_RAM // SpriteRAM (unused)
AM_RANGE(0x0c0000, 0x0c0fff) AM_RAM_DEVWRITE("palette", palette_device, write) AM_SHARE("palette")
AM_RANGE(0x120000, 0x120fff) AM_RAM // Copy of SpriteRAM ?
// AM_RANGE(0x13f000, 0x13f001) AM_WRITENOP // ???
AM_RANGE(0x180000, 0x182fff) AM_DEVREADWRITE("gp9001", gp9001vdp_device, pipibibi_bootleg_videoram16_r, pipibibi_bootleg_videoram16_w) // TileRAM
AM_RANGE(0x188000, 0x18800f) AM_DEVWRITE("gp9001", gp9001vdp_device, pipibibi_bootleg_scroll_w)
AM_RANGE(0x190002, 0x190003) AM_READ(shared_ram_r) // Z80 ready ?
AM_RANGE(0x190010, 0x190011) AM_WRITE(shared_ram_w) // Z80 task to perform
AM_RANGE(0x19c01c, 0x19c01d) AM_WRITE(toaplan2_coin_word_w)
AM_RANGE(0x19c020, 0x19c021) AM_READ_PORT("DSWA")
AM_RANGE(0x19c024, 0x19c025) AM_READ_PORT("DSWB")
AM_RANGE(0x19c028, 0x19c029) AM_READ_PORT("JMPR")
AM_RANGE(0x19c02c, 0x19c02d) AM_READ_PORT("SYS")
AM_RANGE(0x19c030, 0x19c031) AM_READ_PORT("IN1")
AM_RANGE(0x19c034, 0x19c035) AM_READ_PORT("IN2")
ADDRESS_MAP_END
static ADDRESS_MAP_START( fixeight_68k_mem, AS_PROGRAM, 16, toaplan2_state )
AM_RANGE(0x000000, 0x07ffff) AM_ROM
AM_RANGE(0x100000, 0x103fff) AM_RAM
AM_RANGE(0x200000, 0x200001) AM_READ_PORT("IN1")
AM_RANGE(0x200004, 0x200005) AM_READ_PORT("IN2")
AM_RANGE(0x200008, 0x200009) AM_READ_PORT("IN3")
AM_RANGE(0x200010, 0x200011) AM_READ_PORT("SYS")
AM_RANGE(0x20001c, 0x20001d) AM_WRITE(toaplan2_coin_word_w)
AM_RANGE(0x280000, 0x28ffff) AM_READWRITE(shared_ram_r, shared_ram_w )
AM_RANGE(0x300000, 0x30000d) AM_DEVREADWRITE("gp9001", gp9001vdp_device, gp9001_vdp_r, gp9001_vdp_w)
AM_RANGE(0x400000, 0x400fff) AM_RAM_DEVWRITE("palette", palette_device, write) AM_SHARE("palette")
AM_RANGE(0x500000, 0x501fff) AM_RAM_WRITE(toaplan2_tx_videoram_w) AM_SHARE("tx_videoram")
AM_RANGE(0x502000, 0x5021ff) AM_RAM AM_SHARE("tx_lineselect")
AM_RANGE(0x503000, 0x5031ff) AM_RAM_WRITE(toaplan2_tx_linescroll_w) AM_SHARE("tx_linescroll")
AM_RANGE(0x600000, 0x60ffff) AM_RAM_WRITE(toaplan2_tx_gfxram16_w) AM_SHARE("tx_gfxram16")
AM_RANGE(0x700000, 0x700001) AM_WRITE(fixeight_subcpu_ctrl_w)
AM_RANGE(0x800000, 0x800001) AM_READ(video_count_r)
ADDRESS_MAP_END
static ADDRESS_MAP_START( fixeightbl_68k_mem, AS_PROGRAM, 16, toaplan2_state )
AM_RANGE(0x000000, 0x0fffff) AM_ROM // 0-7ffff ?
AM_RANGE(0x100000, 0x10ffff) AM_RAM // 100000-107fff 105000-105xxx 106000-106xxx 108000 - related to sound ?
AM_RANGE(0x200000, 0x200001) AM_READ_PORT("IN1")
AM_RANGE(0x200004, 0x200005) AM_READ_PORT("IN2")
AM_RANGE(0x200008, 0x200009) AM_READ_PORT("IN3")
AM_RANGE(0x20000c, 0x20000d) AM_READ_PORT("DSWB")
AM_RANGE(0x200010, 0x200011) AM_READ_PORT("SYS")
AM_RANGE(0x200014, 0x200015) AM_WRITE(fixeightbl_oki_bankswitch_w) // Sound banking. Code at $4084c, $5070
AM_RANGE(0x200018, 0x200019) AM_DEVREADWRITE8("oki", okim6295_device, read, write, 0x00ff)
AM_RANGE(0x20001c, 0x20001d) AM_READ_PORT("DSWA")
AM_RANGE(0x300000, 0x30000d) AM_DEVREADWRITE("gp9001", gp9001vdp_device, gp9001_vdp_r, gp9001_vdp_w)
AM_RANGE(0x400000, 0x400fff) AM_RAM_DEVWRITE("palette", palette_device, write) AM_SHARE("palette")
AM_RANGE(0x500000, 0x501fff) AM_RAM_WRITE(toaplan2_tx_videoram_w) AM_SHARE("tx_videoram")
AM_RANGE(0x700000, 0x700001) AM_READ(video_count_r)
AM_RANGE(0x800000, 0x87ffff) AM_ROM AM_REGION("maincpu", 0x80000)
ADDRESS_MAP_END
static ADDRESS_MAP_START( vfive_68k_mem, AS_PROGRAM, 16, toaplan2_state )
AM_RANGE(0x000000, 0x07ffff) AM_ROM
AM_RANGE(0x100000, 0x103fff) AM_RAM
// AM_RANGE(0x200000, 0x20ffff) AM_NOP // Read at startup by broken ROM checksum code - see notes
AM_RANGE(0x200010, 0x200011) AM_READ_PORT("IN1")
AM_RANGE(0x200014, 0x200015) AM_READ_PORT("IN2")
AM_RANGE(0x200018, 0x200019) AM_READ_PORT("SYS")
AM_RANGE(0x20001c, 0x20001d) AM_WRITE(toaplan2_v25_coin_word_w) // Coin count/lock + v25 reset line
AM_RANGE(0x210000, 0x21ffff) AM_READWRITE(shared_ram_r, shared_ram_w )
AM_RANGE(0x300000, 0x30000d) AM_DEVREADWRITE("gp9001", gp9001vdp_device, gp9001_vdp_r, gp9001_vdp_w)
AM_RANGE(0x400000, 0x400fff) AM_RAM_DEVWRITE("palette", palette_device, write) AM_SHARE("palette")
AM_RANGE(0x700000, 0x700001) AM_READ(video_count_r)
ADDRESS_MAP_END
static ADDRESS_MAP_START( batsugun_68k_mem, AS_PROGRAM, 16, toaplan2_state )
AM_RANGE(0x000000, 0x07ffff) AM_ROM
AM_RANGE(0x100000, 0x10ffff) AM_RAM
AM_RANGE(0x200010, 0x200011) AM_READ_PORT("IN1")
AM_RANGE(0x200014, 0x200015) AM_READ_PORT("IN2")
AM_RANGE(0x200018, 0x200019) AM_READ_PORT("SYS")
AM_RANGE(0x20001c, 0x20001d) AM_WRITE(toaplan2_v25_coin_word_w) // Coin count/lock + v25 reset line
AM_RANGE(0x210000, 0x21ffff) AM_READWRITE(shared_ram_r, shared_ram_w )
AM_RANGE(0x300000, 0x30000d) AM_DEVREADWRITE("gp9001", gp9001vdp_device, gp9001_vdp_r, gp9001_vdp_w)
AM_RANGE(0x400000, 0x400fff) AM_RAM_DEVWRITE("palette", palette_device, write) AM_SHARE("palette")
AM_RANGE(0x500000, 0x50000d) AM_DEVREADWRITE("gp9001_1", gp9001vdp_device, gp9001_vdp_r, gp9001_vdp_w)
AM_RANGE(0x700000, 0x700001) AM_READ(video_count_r)
ADDRESS_MAP_END
static ADDRESS_MAP_START( pwrkick_68k_mem, AS_PROGRAM, 16, toaplan2_state )
AM_RANGE(0x000000, 0x07ffff) AM_ROM
AM_RANGE(0x100000, 0x10ffff) AM_RAM
AM_RANGE(0x200000, 0x20000f) AM_DEVREADWRITE8("rtc", upd4992_device, read, write, 0x00ff )
AM_RANGE(0x300000, 0x30000d) AM_DEVREADWRITE("gp9001", gp9001vdp_device, gp9001_vdp_r, gp9001_vdp_w)
AM_RANGE(0x400000, 0x400fff) AM_RAM_DEVWRITE("palette", palette_device, write) AM_SHARE("palette")
AM_RANGE(0x600000, 0x600001) AM_DEVREADWRITE8("oki", okim6295_device, read, write, 0x00ff)
AM_RANGE(0x700000, 0x700001) AM_READ(video_count_r)
AM_RANGE(0x700004, 0x700005) AM_READ_PORT("DSWA")
AM_RANGE(0x700008, 0x700009) AM_READ_PORT("DSWB")
AM_RANGE(0x70000c, 0x70000d) AM_READ_PORT("IN1")
AM_RANGE(0x700014, 0x700015) AM_READ_PORT("IN2")
AM_RANGE(0x700018, 0x700019) AM_READ_PORT("DSWC")
AM_RANGE(0x70001c, 0x70001d) AM_READ_PORT("SYS")
AM_RANGE(0x700030, 0x700031) AM_WRITE(oki_bankswitch_w)
AM_RANGE(0x700034, 0x700035) AM_WRITE8(pwrkick_coin_w,0x00ff)
AM_RANGE(0x700038, 0x700039) AM_WRITENOP // lamps?
ADDRESS_MAP_END
static ADDRESS_MAP_START( othldrby_68k_mem, AS_PROGRAM, 16, toaplan2_state )
AM_RANGE(0x000000, 0x07ffff) AM_ROM
AM_RANGE(0x100000, 0x10ffff) AM_RAM
AM_RANGE(0x200000, 0x20000f) AM_DEVREADWRITE8("rtc", upd4992_device, read, write, 0x00ff )
AM_RANGE(0x300000, 0x30000d) AM_DEVREADWRITE("gp9001", gp9001vdp_device, gp9001_vdp_r, gp9001_vdp_w)
AM_RANGE(0x400000, 0x400fff) AM_RAM_DEVWRITE("palette", palette_device, write) AM_SHARE("palette")
AM_RANGE(0x600000, 0x600001) AM_DEVREADWRITE8("oki", okim6295_device, read, write, 0x00ff)
AM_RANGE(0x700000, 0x700001) AM_READ(video_count_r)
AM_RANGE(0x700004, 0x700005) AM_READ_PORT("DSWA")
AM_RANGE(0x700008, 0x700009) AM_READ_PORT("DSWB")
AM_RANGE(0x70000c, 0x70000d) AM_READ_PORT("IN1")
AM_RANGE(0x700010, 0x700011) AM_READ_PORT("IN2")
AM_RANGE(0x70001c, 0x70001d) AM_READ_PORT("SYS")
AM_RANGE(0x700030, 0x700031) AM_WRITE(oki_bankswitch_w)
AM_RANGE(0x700034, 0x700035) AM_WRITE(toaplan2_coin_word_w)
ADDRESS_MAP_END
static ADDRESS_MAP_START( snowbro2_68k_mem, AS_PROGRAM, 16, toaplan2_state )
AM_RANGE(0x000000, 0x07ffff) AM_ROM
AM_RANGE(0x100000, 0x10ffff) AM_RAM
AM_RANGE(0x300000, 0x30000d) AM_DEVREADWRITE("gp9001", gp9001vdp_device, gp9001_vdp_r, gp9001_vdp_w)
AM_RANGE(0x400000, 0x400fff) AM_RAM_DEVWRITE("palette", palette_device, write) AM_SHARE("palette")
AM_RANGE(0x500000, 0x500003) AM_DEVREADWRITE8("ymsnd", ym2151_device, read, write, 0x00ff)
AM_RANGE(0x600000, 0x600001) AM_DEVREADWRITE8("oki", okim6295_device, read, write, 0x00ff)
AM_RANGE(0x700000, 0x700001) AM_READ_PORT("JMPR")
AM_RANGE(0x700004, 0x700005) AM_READ_PORT("DSWA")
AM_RANGE(0x700008, 0x700009) AM_READ_PORT("DSWB")
AM_RANGE(0x70000c, 0x70000d) AM_READ_PORT("IN1")
AM_RANGE(0x700010, 0x700011) AM_READ_PORT("IN2")
AM_RANGE(0x700014, 0x700015) AM_READ_PORT("IN3")
AM_RANGE(0x700018, 0x700019) AM_READ_PORT("IN4")
AM_RANGE(0x70001c, 0x70001d) AM_READ_PORT("SYS")
AM_RANGE(0x700030, 0x700031) AM_WRITE(oki_bankswitch_w)
AM_RANGE(0x700034, 0x700035) AM_WRITE(toaplan2_coin_word_w)
ADDRESS_MAP_END
static ADDRESS_MAP_START( mahoudai_68k_mem, AS_PROGRAM, 16, toaplan2_state )
AM_RANGE(0x000000, 0x07ffff) AM_ROM
AM_RANGE(0x100000, 0x10ffff) AM_RAM
AM_RANGE(0x218000, 0x21bfff) AM_READWRITE(shared_ram_r, shared_ram_w)
AM_RANGE(0x21c01c, 0x21c01d) AM_WRITE(toaplan2_coin_word_w)
AM_RANGE(0x21c020, 0x21c021) AM_READ_PORT("IN1")
AM_RANGE(0x21c024, 0x21c025) AM_READ_PORT("IN2")
AM_RANGE(0x21c028, 0x21c029) AM_READ_PORT("SYS")
AM_RANGE(0x21c02c, 0x21c02d) AM_READ_PORT("DSWA")
AM_RANGE(0x21c030, 0x21c031) AM_READ_PORT("DSWB")
AM_RANGE(0x21c034, 0x21c035) AM_READ_PORT("JMPR")
AM_RANGE(0x21c03c, 0x21c03d) AM_READ(video_count_r)
AM_RANGE(0x300000, 0x30000d) AM_DEVREADWRITE("gp9001", gp9001vdp_device, gp9001_vdp_r, gp9001_vdp_w)
AM_RANGE(0x400000, 0x400fff) AM_RAM_DEVWRITE("palette", palette_device, write) AM_SHARE("palette")
AM_RANGE(0x401000, 0x4017ff) AM_RAM // Unused palette RAM
AM_RANGE(0x500000, 0x501fff) AM_RAM_WRITE(toaplan2_tx_videoram_w) AM_SHARE("tx_videoram")
AM_RANGE(0x502000, 0x502fff) AM_RAM AM_SHARE("tx_lineselect")
AM_RANGE(0x503000, 0x5031ff) AM_RAM_WRITE(toaplan2_tx_linescroll_w) AM_SHARE("tx_linescroll")
AM_RANGE(0x503200, 0x503fff) AM_RAM
ADDRESS_MAP_END
static ADDRESS_MAP_START( shippumd_68k_mem, AS_PROGRAM, 16, toaplan2_state )
AM_RANGE(0x000000, 0x0fffff) AM_ROM
AM_RANGE(0x100000, 0x10ffff) AM_RAM
AM_RANGE(0x218000, 0x21bfff) AM_READWRITE(shared_ram_r, shared_ram_w)
// AM_RANGE(0x21c008, 0x21c009) AM_WRITENOP // ???
AM_RANGE(0x21c01c, 0x21c01d) AM_WRITE(shippumd_coin_word_w) // Coin count/lock + oki bankswitch
AM_RANGE(0x21c020, 0x21c021) AM_READ_PORT("IN1")
AM_RANGE(0x21c024, 0x21c025) AM_READ_PORT("IN2")
AM_RANGE(0x21c028, 0x21c029) AM_READ_PORT("SYS")
AM_RANGE(0x21c02c, 0x21c02d) AM_READ_PORT("DSWA")
AM_RANGE(0x21c030, 0x21c031) AM_READ_PORT("DSWB")
AM_RANGE(0x21c034, 0x21c035) AM_READ_PORT("JMPR")
AM_RANGE(0x21c03c, 0x21c03d) AM_READ(video_count_r)
AM_RANGE(0x300000, 0x30000d) AM_DEVREADWRITE("gp9001", gp9001vdp_device, gp9001_vdp_r, gp9001_vdp_w)
AM_RANGE(0x400000, 0x400fff) AM_RAM_DEVWRITE("palette", palette_device, write) AM_SHARE("palette")
AM_RANGE(0x401000, 0x4017ff) AM_RAM // Unused palette RAM
AM_RANGE(0x500000, 0x501fff) AM_RAM_WRITE(toaplan2_tx_videoram_w) AM_SHARE("tx_videoram")
AM_RANGE(0x502000, 0x502fff) AM_RAM AM_SHARE("tx_lineselect")
AM_RANGE(0x503000, 0x5031ff) AM_RAM_WRITE(toaplan2_tx_linescroll_w) AM_SHARE("tx_linescroll")
AM_RANGE(0x503200, 0x503fff) AM_RAM
ADDRESS_MAP_END
static ADDRESS_MAP_START( bgaregga_68k_mem, AS_PROGRAM, 16, toaplan2_state )
AM_RANGE(0x000000, 0x0fffff) AM_ROM
AM_RANGE(0x100000, 0x10ffff) AM_RAM
AM_RANGE(0x218000, 0x21bfff) AM_READWRITE(shared_ram_r, shared_ram_w)
AM_RANGE(0x21c01c, 0x21c01d) AM_WRITE(toaplan2_coin_word_w)
AM_RANGE(0x21c020, 0x21c021) AM_READ_PORT("IN1")
AM_RANGE(0x21c024, 0x21c025) AM_READ_PORT("IN2")
AM_RANGE(0x21c028, 0x21c029) AM_READ_PORT("SYS")
AM_RANGE(0x21c02c, 0x21c02d) AM_READ_PORT("DSWA")
AM_RANGE(0x21c030, 0x21c031) AM_READ_PORT("DSWB")
AM_RANGE(0x21c034, 0x21c035) AM_READ_PORT("JMPR")
AM_RANGE(0x21c03c, 0x21c03d) AM_READ(video_count_r)
AM_RANGE(0x300000, 0x30000d) AM_DEVREADWRITE("gp9001", gp9001vdp_device, gp9001_vdp_r, gp9001_vdp_w)
AM_RANGE(0x400000, 0x400fff) AM_RAM_DEVWRITE("palette", palette_device, write) AM_SHARE("palette")
AM_RANGE(0x500000, 0x501fff) AM_RAM_WRITE(toaplan2_tx_videoram_w) AM_SHARE("tx_videoram")
AM_RANGE(0x502000, 0x502fff) AM_RAM AM_SHARE("tx_lineselect")
AM_RANGE(0x503000, 0x5031ff) AM_RAM_WRITE(toaplan2_tx_linescroll_w) AM_SHARE("tx_linescroll")
AM_RANGE(0x503200, 0x503fff) AM_RAM
AM_RANGE(0x600000, 0x600001) AM_WRITE(bgaregga_soundlatch_w)
ADDRESS_MAP_END
static ADDRESS_MAP_START( batrider_68k_mem, AS_PROGRAM, 16, toaplan2_state )
AM_RANGE(0x000000, 0x1fffff) AM_ROM
// actually 200000 - 20ffff is probably all main RAM, and the text and palette RAM are written via DMA
AM_RANGE(0x200000, 0x201fff) AM_RAM_WRITE(toaplan2_tx_videoram_w) AM_SHARE("tx_videoram")
AM_RANGE(0x202000, 0x202fff) AM_RAM_DEVWRITE("palette", palette_device, write) AM_SHARE("palette")
AM_RANGE(0x203000, 0x2031ff) AM_RAM AM_SHARE("tx_lineselect")
AM_RANGE(0x203200, 0x2033ff) AM_RAM_WRITE(toaplan2_tx_linescroll_w) AM_SHARE("tx_linescroll")
AM_RANGE(0x203400, 0x207fff) AM_RAM AM_SHARE("mainram16")
AM_RANGE(0x208000, 0x20ffff) AM_RAM
AM_RANGE(0x300000, 0x37ffff) AM_READ(batrider_z80rom_r)
AM_RANGE(0x400000, 0x40000d) AM_DEVREADWRITE("gp9001", gp9001vdp_device, gp9001_vdp_alt_r, gp9001_vdp_alt_w)
AM_RANGE(0x500000, 0x500001) AM_READ_PORT("IN")
AM_RANGE(0x500002, 0x500003) AM_READ_PORT("SYS-DSW")
AM_RANGE(0x500004, 0x500005) AM_READ_PORT("DSW")
AM_RANGE(0x500006, 0x500007) AM_READ(video_count_r)
AM_RANGE(0x500008, 0x500009) AM_DEVREAD8("soundlatch3", generic_latch_8_device, read, 0x00ff)
AM_RANGE(0x50000a, 0x50000b) AM_DEVREAD8("soundlatch4", generic_latch_8_device, read, 0x00ff)
AM_RANGE(0x50000c, 0x50000d) AM_READ(batrider_z80_busack_r)
AM_RANGE(0x500010, 0x500011) AM_WRITE(toaplan2_coin_word_w)
AM_RANGE(0x500020, 0x500021) AM_WRITE(batrider_soundlatch_w)
AM_RANGE(0x500022, 0x500023) AM_WRITE(batrider_soundlatch2_w)
AM_RANGE(0x500024, 0x500025) AM_WRITE(batrider_unknown_sound_w)
AM_RANGE(0x500026, 0x500027) AM_WRITE(batrider_clear_sndirq_w)
AM_RANGE(0x500060, 0x500061) AM_WRITE(batrider_z80_busreq_w)
AM_RANGE(0x500080, 0x500081) AM_WRITE(batrider_textdata_dma_w)
AM_RANGE(0x500082, 0x500083) AM_WRITE(batrider_unknown_dma_w)
AM_RANGE(0x5000c0, 0x5000cf) AM_WRITE(batrider_objectbank_w)
ADDRESS_MAP_END
static ADDRESS_MAP_START( bbakraid_68k_mem, AS_PROGRAM, 16, toaplan2_state )
AM_RANGE(0x000000, 0x1fffff) AM_ROM
// actually 200000 - 20ffff is probably all main RAM, and the text and palette RAM are written via DMA
AM_RANGE(0x200000, 0x201fff) AM_RAM_WRITE(toaplan2_tx_videoram_w) AM_SHARE("tx_videoram")
AM_RANGE(0x202000, 0x202fff) AM_RAM_DEVWRITE("palette", palette_device, write) AM_SHARE("palette")
AM_RANGE(0x203000, 0x2031ff) AM_RAM AM_SHARE("tx_lineselect")
AM_RANGE(0x203200, 0x2033ff) AM_RAM_WRITE(toaplan2_tx_linescroll_w) AM_SHARE("tx_linescroll")
AM_RANGE(0x203400, 0x207fff) AM_RAM AM_SHARE("mainram16")
AM_RANGE(0x208000, 0x20ffff) AM_RAM
AM_RANGE(0x300000, 0x33ffff) AM_READ(batrider_z80rom_r)
AM_RANGE(0x400000, 0x40000d) AM_DEVREADWRITE("gp9001", gp9001vdp_device, gp9001_vdp_alt_r, gp9001_vdp_alt_w)
AM_RANGE(0x500000, 0x500001) AM_READ_PORT("IN")
AM_RANGE(0x500002, 0x500003) AM_READ_PORT("SYS-DSW")
AM_RANGE(0x500004, 0x500005) AM_READ_PORT("DSW")
AM_RANGE(0x500006, 0x500007) AM_READ(video_count_r)
AM_RANGE(0x500008, 0x500009) AM_WRITE(toaplan2_coin_word_w)
AM_RANGE(0x500010, 0x500011) AM_DEVREAD8("soundlatch3", generic_latch_8_device, read, 0x00ff)
AM_RANGE(0x500012, 0x500013) AM_DEVREAD8("soundlatch4", generic_latch_8_device, read, 0x00ff)
AM_RANGE(0x500014, 0x500015) AM_WRITE(batrider_soundlatch_w)
AM_RANGE(0x500016, 0x500017) AM_WRITE(batrider_soundlatch2_w)
AM_RANGE(0x500018, 0x500019) AM_READ(bbakraid_eeprom_r)
AM_RANGE(0x50001a, 0x50001b) AM_WRITE(batrider_unknown_sound_w)
AM_RANGE(0x50001c, 0x50001d) AM_WRITE(batrider_clear_sndirq_w)
AM_RANGE(0x50001e, 0x50001f) AM_WRITE(bbakraid_eeprom_w)
AM_RANGE(0x500080, 0x500081) AM_WRITE(batrider_textdata_dma_w)
AM_RANGE(0x500082, 0x500083) AM_WRITE(batrider_unknown_dma_w)
AM_RANGE(0x5000c0, 0x5000cf) AM_WRITE(batrider_objectbank_w)
ADDRESS_MAP_END
static ADDRESS_MAP_START( pipibibs_sound_z80_mem, AS_PROGRAM, 8, toaplan2_state )
AM_RANGE(0x0000, 0x7fff) AM_ROM
AM_RANGE(0x8000, 0x87ff) AM_RAM AM_SHARE("shared_ram")
AM_RANGE(0xe000, 0xe001) AM_DEVREADWRITE("ymsnd", ym3812_device, read, write)
ADDRESS_MAP_END
static ADDRESS_MAP_START( raizing_sound_z80_mem, AS_PROGRAM, 8, toaplan2_state )
AM_RANGE(0x0000, 0xbfff) AM_ROM
AM_RANGE(0xc000, 0xdfff) AM_RAM AM_SHARE("shared_ram")
AM_RANGE(0xe000, 0xe001) AM_DEVREADWRITE("ymsnd", ym2151_device, read, write)
AM_RANGE(0xe004, 0xe004) AM_DEVREADWRITE("oki", okim6295_device, read, write)
AM_RANGE(0xe00e, 0xe00e) AM_WRITE(toaplan2_coin_w)
ADDRESS_MAP_END
static ADDRESS_MAP_START( bgaregga_sound_z80_mem, AS_PROGRAM, 8, toaplan2_state )
AM_RANGE(0x0000, 0x7fff) AM_ROM
AM_RANGE(0x8000, 0xbfff) AM_ROMBANK("bank1")
AM_RANGE(0xc000, 0xdfff) AM_RAM AM_SHARE("shared_ram")
AM_RANGE(0xe000, 0xe001) AM_DEVREADWRITE("ymsnd", ym2151_device, read, write)
AM_RANGE(0xe004, 0xe004) AM_DEVREADWRITE("oki", okim6295_device, read, write)
AM_RANGE(0xe006, 0xe008) AM_WRITE(raizing_oki_bankswitch_w)
AM_RANGE(0xe00a, 0xe00a) AM_WRITE(raizing_z80_bankswitch_w)
AM_RANGE(0xe00c, 0xe00c) AM_WRITE(bgaregga_E00C_w)
AM_RANGE(0xe01c, 0xe01c) AM_DEVREAD("soundlatch", generic_latch_8_device, read)
AM_RANGE(0xe01d, 0xe01d) AM_READ(bgaregga_E01D_r)
ADDRESS_MAP_END
static ADDRESS_MAP_START( batrider_sound_z80_mem, AS_PROGRAM, 8, toaplan2_state )
AM_RANGE(0x0000, 0x7fff) AM_ROM
AM_RANGE(0x8000, 0xbfff) AM_ROMBANK("bank1")
AM_RANGE(0xc000, 0xdfff) AM_RAM
ADDRESS_MAP_END
static ADDRESS_MAP_START( batrider_sound_z80_port, AS_IO, 8, toaplan2_state )
ADDRESS_MAP_GLOBAL_MASK(0xff)
AM_RANGE(0x40, 0x40) AM_DEVWRITE("soundlatch3", generic_latch_8_device, write)
AM_RANGE(0x42, 0x42) AM_DEVWRITE("soundlatch4", generic_latch_8_device, write)
AM_RANGE(0x44, 0x44) AM_WRITE(batrider_sndirq_w)
AM_RANGE(0x46, 0x46) AM_WRITE(batrider_clear_nmi_w)
AM_RANGE(0x48, 0x48) AM_DEVREAD("soundlatch", generic_latch_8_device, read)
AM_RANGE(0x4a, 0x4a) AM_DEVREAD("soundlatch2", generic_latch_8_device, read)
AM_RANGE(0x80, 0x81) AM_DEVREADWRITE("ymsnd", ym2151_device, read, write)
AM_RANGE(0x82, 0x82) AM_DEVREADWRITE("oki1", okim6295_device, read, write)
AM_RANGE(0x84, 0x84) AM_DEVREADWRITE("oki2", okim6295_device, read, write)
AM_RANGE(0x88, 0x88) AM_WRITE(raizing_z80_bankswitch_w)
AM_RANGE(0xc0, 0xc6) AM_WRITE(raizing_oki_bankswitch_w)
ADDRESS_MAP_END
static ADDRESS_MAP_START( bbakraid_sound_z80_mem, AS_PROGRAM, 8, toaplan2_state )
AM_RANGE(0x0000, 0xbfff) AM_ROM // No banking? ROM only contains code and data up to 0x28DC
AM_RANGE(0xc000, 0xffff) AM_RAM
ADDRESS_MAP_END
static ADDRESS_MAP_START( bbakraid_sound_z80_port, AS_IO, 8, toaplan2_state )
ADDRESS_MAP_GLOBAL_MASK(0xff)
AM_RANGE(0x40, 0x40) AM_DEVWRITE("soundlatch3", generic_latch_8_device, write)
AM_RANGE(0x42, 0x42) AM_DEVWRITE("soundlatch4", generic_latch_8_device, write)
AM_RANGE(0x44, 0x44) AM_WRITE(batrider_sndirq_w)
AM_RANGE(0x46, 0x46) AM_WRITE(batrider_clear_nmi_w)
AM_RANGE(0x48, 0x48) AM_DEVREAD("soundlatch", generic_latch_8_device, read)
AM_RANGE(0x4a, 0x4a) AM_DEVREAD("soundlatch2", generic_latch_8_device, read)
AM_RANGE(0x80, 0x81) AM_DEVREADWRITE("ymz", ymz280b_device, read, write)
ADDRESS_MAP_END
#ifdef USE_HD64x180
static ADDRESS_MAP_START( hd647180_mem, AS_PROGRAM, 8, toaplan2_state )
AM_RANGE(0x0000, 0x7fff) AM_ROM
AM_RANGE(0xfe00, 0xffff) AM_RAM // Internal 512 bytes of RAM
ADDRESS_MAP_END
#endif
static ADDRESS_MAP_START( v25_mem, AS_PROGRAM, 8, toaplan2_state )
AM_RANGE(0x00000, 0x00001) AM_DEVREADWRITE("ymsnd", ym2151_device, read, write)
AM_RANGE(0x00004, 0x00004) AM_DEVREADWRITE("oki", okim6295_device, read, write)
AM_RANGE(0x80000, 0x87fff) AM_MIRROR(0x78000) AM_RAM AM_SHARE("shared_ram")
ADDRESS_MAP_END
static ADDRESS_MAP_START( kbash_v25_mem, AS_PROGRAM, 8, toaplan2_state )
AM_RANGE(0x00000, 0x007ff) AM_RAM AM_SHARE("shared_ram")
AM_RANGE(0x04000, 0x04001) AM_DEVREADWRITE("ymsnd", ym2151_device, read, write)
AM_RANGE(0x04002, 0x04002) AM_DEVREADWRITE("oki", okim6295_device, read, write)
AM_RANGE(0x80000, 0x87fff) AM_MIRROR(0x78000) AM_ROM AM_REGION("audiocpu", 0)
ADDRESS_MAP_END
static ADDRESS_MAP_START( fixeight_v25_mem, AS_PROGRAM, 8, toaplan2_state )
AM_RANGE(0x00004, 0x00004) AM_READ(fixeight_region_r)
AM_RANGE(0x0000a, 0x0000b) AM_DEVREADWRITE("ymsnd", ym2151_device, read, write)
AM_RANGE(0x0000c, 0x0000c) AM_DEVREADWRITE("oki", okim6295_device, read, write)
AM_RANGE(0x80000, 0x87fff) AM_MIRROR(0x78000) AM_RAM AM_SHARE("shared_ram")
ADDRESS_MAP_END
static ADDRESS_MAP_START( vfive_v25_mem, AS_PROGRAM, 8, toaplan2_state )
AM_RANGE(0x00000, 0x00001) AM_DEVREADWRITE("ymsnd", ym2151_device, read, write)
AM_RANGE(0x80000, 0x87fff) AM_MIRROR(0x78000) AM_RAM AM_SHARE("shared_ram")
ADDRESS_MAP_END
static ADDRESS_MAP_START( fixeightbl_oki, AS_0, 8, toaplan2_state )
AM_RANGE(0x00000, 0x2ffff) AM_ROM
AM_RANGE(0x30000, 0x3ffff) AM_ROMBANK("bank1")
ADDRESS_MAP_END
/*****************************************************************************
Input Port definitions
The following commands are available when the Invulnerability dipswitch
is set (or, in some games, also when the JAMMA Test switch is pressed):
P2 start : pause
P1 start : resume
Hold P1 start & P2 start : slow motion
In bgaregga, batrider and bbakraid, the commands are different:
Tap P1 start : pause/resume
Hold P1 start : slow motion
Additional per-game test features are as follows:
truxton2 - While playing in invulnerable mode, press button 3 to suicide.
fixeight - While playing in invulnerable mode, press button 3 to suicide
(player 1 and player 2 only)
batsugun - While playing in invulnerable mode, press the following buttons
to stage skip:
P2 button 3 & P2 button 1 : Skip to end of stage 1
P2 button 3 & P2 button 2 : Skip to end of stage 2
P2 button 3 : Skip to end of stage 3
sstriker - While playing in invulnerable mode as player 2, press
/kingdmgp P2 button 3 to skip to the end of the current stage.
bgaregga - Press and hold P1 button 1, P1 button 2 and P1 button 3 while
powering on in service mode to enter the special service mode.
"OPTIONS" and "PLAY DATAS" are added to the menu, and the
dipswitch display will show the region jumpers (normally hidden).
Choose "GAME MODE" from the special service mode to enter the
special game mode. In the special game mode, you can use pause
and slow motion even when not playing in invulnerable mode.
batrider - While playing in invulnerable mode, press P1 Start and P2 Start
to skip directly to the ending scene.
batrider - Press and hold P1 button 1, P1 button 2 and P1 button 3 while
/bbakraid powering on in service mode to enter the special service mode.
You can change the game's region by pressing left/right.
Choose "GAME MODE" from the special service mode to enter the
special game mode. In the special game mode, you can use pause
and slow motion even when not playing in invulnerable mode.
While the game is paused in special mode, press button 3 to
display debugging information.
*****************************************************************************/
static INPUT_PORTS_START( toaplan2_2b )
PORT_START("IN1")
TOAPLAN_JOY_UDLR_2_BUTTONS( 1 )
PORT_START("IN2")
TOAPLAN_JOY_UDLR_2_BUTTONS( 2 )
PORT_START("SYS")
PORT_BIT( 0x0001, IP_ACTIVE_HIGH, IPT_SERVICE1 )
PORT_BIT( 0x0002, IP_ACTIVE_HIGH, IPT_TILT )
TOAPLAN_TEST_SWITCH( 0x04, IP_ACTIVE_HIGH )
PORT_BIT( 0x0008, IP_ACTIVE_HIGH, IPT_COIN1 )
PORT_BIT( 0x0010, IP_ACTIVE_HIGH, IPT_COIN2 )
PORT_BIT( 0x0020, IP_ACTIVE_HIGH, IPT_START1 )
PORT_BIT( 0x0040, IP_ACTIVE_HIGH, IPT_START2 )
PORT_BIT( 0x0080, IP_ACTIVE_HIGH, IPT_UNKNOWN )
PORT_START("DSWA")
TOAPLAN_MACHINE_NO_COCKTAIL_LOC(SW1)
// Coinage on bit mask 0x00f0
PORT_BIT( 0x00f0, IP_ACTIVE_HIGH, IPT_UNKNOWN ) // Modified below
PORT_START("DSWB")
TOAPLAN_DIFFICULTY_LOC(SW2)
// Per-game features on bit mask 0x00fc
PORT_BIT( 0x00fc, IP_ACTIVE_HIGH, IPT_UNKNOWN ) // Modified below
INPUT_PORTS_END
static INPUT_PORTS_START( toaplan2_3b )
PORT_INCLUDE( toaplan2_2b )
PORT_MODIFY("IN1")
TOAPLAN_JOY_UDLR_3_BUTTONS( 1 )
PORT_MODIFY("IN2")
TOAPLAN_JOY_UDLR_3_BUTTONS( 2 )
INPUT_PORTS_END
static INPUT_PORTS_START( tekipaki )
PORT_INCLUDE( toaplan2_2b )
PORT_MODIFY("DSWA")
// Various features on bit mask 0x000f - see above
TOAPLAN_COINAGE_DUAL_LOC( JMPR, 0x0f, 0x02, SW1 )
PORT_MODIFY("DSWB")
// Difficulty on bit mask 0x0003 - see above
// "Stop Mode" corresponds to "Invulnerability" in the other games
// (i.e. it enables pause and slow motion)
PORT_DIPNAME( 0x0004, 0x0000, DEF_STR( Unused ) ) PORT_DIPLOCATION("SW2:!3")
PORT_DIPSETTING( 0x0000, DEF_STR( Off ) )
PORT_DIPSETTING( 0x0004, DEF_STR( On ) )
PORT_DIPNAME( 0x0008, 0x0000, DEF_STR( Unused ) ) PORT_DIPLOCATION("SW2:!4")
PORT_DIPSETTING( 0x0000, DEF_STR( Off ) )
PORT_DIPSETTING( 0x0008, DEF_STR( On ) )
PORT_DIPNAME( 0x0010, 0x0000, DEF_STR( Unused ) ) PORT_DIPLOCATION("SW2:!5")
PORT_DIPSETTING( 0x0000, DEF_STR( Off ) )
PORT_DIPSETTING( 0x0010, DEF_STR( On ) )
PORT_DIPNAME( 0x0020, 0x0000, DEF_STR( Unused ) ) PORT_DIPLOCATION("SW2:!6")
PORT_DIPSETTING( 0x0000, DEF_STR( Off ) )
PORT_DIPSETTING( 0x0020, DEF_STR( On ) )
PORT_DIPNAME( 0x0040, 0x0000, "Stop Mode (Cheat)" ) PORT_DIPLOCATION("SW2:!7")
PORT_DIPSETTING( 0x0000, DEF_STR( Off ) )
PORT_DIPSETTING( 0x0040, DEF_STR( On ) )
PORT_DIPNAME( 0x0080, 0x0000, DEF_STR( Unused ) ) PORT_DIPLOCATION("SW2:!8")
PORT_DIPSETTING( 0x0000, DEF_STR( Off ) )
PORT_DIPSETTING( 0x0080, DEF_STR( On ) )
PORT_START("JMPR")
PORT_CONFNAME( 0x000f, 0x0002, DEF_STR( Region ) ) PORT_DIPLOCATION("JP:!4,!3,!2,!1")
PORT_CONFSETTING( 0x0002, DEF_STR( Europe ) )
PORT_CONFSETTING( 0x0001, DEF_STR( USA ) )
PORT_CONFSETTING( 0x0000, DEF_STR( Japan ) )
PORT_CONFSETTING( 0x0003, DEF_STR( Hong_Kong ) )
PORT_CONFSETTING( 0x0004, DEF_STR( Korea ) )
PORT_CONFSETTING( 0x0005, DEF_STR( Taiwan ) )
PORT_CONFSETTING( 0x0006, "Taiwan (Spacy Co., Ltd." )
PORT_CONFSETTING( 0x0007, "USA (Romstar, Inc.)" )
PORT_CONFSETTING( 0x0008, "Hong Kong (Honest Trading Co.)" )
// PORT_CONFSETTING( 0x0009, DEF_STR( Japan ) ) // English title screen
// PORT_CONFSETTING( 0x000a, DEF_STR( Japan ) )
// PORT_CONFSETTING( 0x000b, DEF_STR( Japan ) )
// PORT_CONFSETTING( 0x000c, DEF_STR( Japan ) )
// PORT_CONFSETTING( 0x000d, DEF_STR( Japan ) )
// PORT_CONFSETTING( 0x000e, DEF_STR( Japan ) )
PORT_CONFSETTING( 0x000f, "Japan (Distributed by Tecmo)" )
PORT_BIT( 0x0010, IP_ACTIVE_HIGH, IPT_SPECIAL ) PORT_CUSTOM_MEMBER(DEVICE_SELF, toaplan2_state,c2map_r, nullptr)
INPUT_PORTS_END
static INPUT_PORTS_START( ghox )
PORT_INCLUDE( toaplan2_2b )
PORT_MODIFY("DSWA")
// Various features on bit mask 0x000f - see above
TOAPLAN_COINAGE_DUAL_LOC( JMPR, 0x80000, 0x80000, SW1 )
PORT_MODIFY("DSWB")
// Difficulty on bit mask 0x0003 - see above
// "Debug Mode" corresponds to "Invulnerability" in the other games
// (i.e. it enables pause and slow motion)
PORT_DIPNAME( 0x000c, 0x0000, DEF_STR( Bonus_Life ) ) PORT_DIPLOCATION("SW2:!3,!4")
PORT_DIPSETTING( 0x000c, DEF_STR( None ) )
PORT_DIPSETTING( 0x0008, "100k only" )
PORT_DIPSETTING( 0x0004, "100k and 300k" )
PORT_DIPSETTING( 0x0000, "100k and every 200k" )
PORT_DIPNAME( 0x0030, 0x0000, DEF_STR( Lives ) ) PORT_DIPLOCATION("SW2:!5,!6")
PORT_DIPSETTING( 0x0030, "1" )
PORT_DIPSETTING( 0x0020, "2" )
PORT_DIPSETTING( 0x0000, "3" )
PORT_DIPSETTING( 0x0010, "5" )
PORT_DIPNAME( 0x0040, 0x0000, "Debug Mode (Cheat)" ) PORT_DIPLOCATION("SW2:!7")
PORT_DIPSETTING( 0x0000, DEF_STR( Off ) )
PORT_DIPSETTING( 0x0040, DEF_STR( On ) )
PORT_DIPNAME( 0x0080, 0x0000, DEF_STR( Unused ) ) PORT_DIPLOCATION("SW2:!8")
PORT_DIPSETTING( 0x0000, DEF_STR( Off ) )
PORT_DIPSETTING( 0x0080, DEF_STR( On ) )
PORT_START("JMPR")
// Bit Mask 0x80000 is used here to signify European Coinage for MAME purposes - not read on the real board!
PORT_CONFNAME( 0x8000f, 0x80002, DEF_STR( Region ) ) //PORT_CONFLOCATION("JP:!4,!3,!2,!1,FAKE:!1")
PORT_CONFSETTING( 0x80002, DEF_STR( Europe ) )
PORT_CONFSETTING( 0x00001, DEF_STR( USA ) )
PORT_CONFSETTING( 0x00000, DEF_STR( Japan ) )
PORT_CONFSETTING( 0x00003, "Hong Kong (Honest Trading Co.)" )
PORT_CONFSETTING( 0x00004, DEF_STR( Korea ) )
PORT_CONFSETTING( 0x00005, DEF_STR( Taiwan ) )
PORT_CONFSETTING( 0x80006, "Spain & Portugal (APM Electronics S.A.)" )
PORT_CONFSETTING( 0x80007, "Italy (Star Electronica SRL)" )
PORT_CONFSETTING( 0x80008, "UK (JP Leisure Limited)" )
PORT_CONFSETTING( 0x00009, "USA (Romstar, Inc.)" )
PORT_CONFSETTING( 0x8000a, "Europe (Nova Apparate GMBH & Co.)" )
PORT_CONFSETTING( 0x0000b, "USA (Taito America Corporation)" )
PORT_CONFSETTING( 0x0000c, "USA (Taito Corporation Japan)" )
PORT_CONFSETTING( 0x8000d, "Europe (Taito Corporation Japan)" )
// PORT_CONFSETTING( 0x0000e, "Japan (Licensed to [blank])" ) // English title screen
PORT_CONFSETTING( 0x0000f, "Japan (Taito Corporation)" )
PORT_START("PAD1") /* Paddle 1 (left-right) read at $100000 */
PORT_BIT( 0xff, 0x00, IPT_DIAL ) PORT_SENSITIVITY(25) PORT_KEYDELTA(15) PORT_PLAYER(1)
PORT_BIT( 0xff00, IP_ACTIVE_HIGH, IPT_UNKNOWN ) // Unknown/Unused
PORT_START("PAD2") /* Paddle 2 (left-right) read at $040000 */
PORT_BIT( 0xff, 0x00, IPT_DIAL ) PORT_SENSITIVITY(25) PORT_KEYDELTA(15) PORT_PLAYER(2)
PORT_BIT( 0xff00, IP_ACTIVE_HIGH, IPT_UNKNOWN ) // Unknown/Unused
INPUT_PORTS_END
static INPUT_PORTS_START( dogyuun )
PORT_INCLUDE( toaplan2_3b )
PORT_MODIFY("DSWA")
PORT_DIPNAME( 0x0001, 0x0000, DEF_STR( Free_Play) ) PORT_DIPLOCATION("SW1:!1")
PORT_DIPSETTING( 0x0000, DEF_STR( Off ) )
PORT_DIPSETTING( 0x0001, DEF_STR( On ) )
// Various features on bit mask 0x000e - see above
TOAPLAN_COINAGE_DUAL_LOC( JMPR, 0x8000, 0x8000, SW1 )
PORT_MODIFY("DSWB")
// Difficulty on bit mask 0x0003 - see above
PORT_DIPNAME( 0x000c, 0x0000, DEF_STR( Bonus_Life ) ) PORT_DIPLOCATION("SW2:!3,!4")
PORT_DIPSETTING( 0x000c, DEF_STR( None ) )
PORT_DIPSETTING( 0x0008, "400k only" )
PORT_DIPSETTING( 0x0000, "200k only" )
PORT_DIPSETTING( 0x0004, "200k, 400k and 600k" )
PORT_DIPNAME( 0x0030, 0x0000, DEF_STR( Lives ) ) PORT_DIPLOCATION("SW2:!5,!6")
PORT_DIPSETTING( 0x0030, "1" )
PORT_DIPSETTING( 0x0020, "2" )
PORT_DIPSETTING( 0x0000, "3" )
PORT_DIPSETTING( 0x0010, "5" )
PORT_DIPNAME( 0x0040, 0x0000, "Invulnerability (Cheat)" ) PORT_DIPLOCATION("SW2:!7")
PORT_DIPSETTING( 0x0000, DEF_STR( Off ) )
PORT_DIPSETTING( 0x0040, DEF_STR( On ) )
PORT_DIPNAME( 0x0080, 0x0000, DEF_STR( Allow_Continue ) ) PORT_DIPLOCATION("SW2:!8")
PORT_DIPSETTING( 0x0080, DEF_STR( No ) )
PORT_DIPSETTING( 0x0000, DEF_STR( Yes ) )
PORT_START("JMPR")
// Bit Mask 0x8000 is used here to signify European Coinage for MAME purposes - not read on the real board!
// "No speedups": all speedup items in game are replaced with bombs
PORT_CONFNAME( 0x80f0, 0x8030, DEF_STR( Region ) ) //PORT_CONFLOCATION("JP:!4,!3,!2,!1,FAKE:!1")
PORT_CONFSETTING( 0x8030, DEF_STR( Europe ) )
PORT_CONFSETTING( 0x0010, DEF_STR( USA ) )
PORT_CONFSETTING( 0x0020, "USA (Atari Games Corp.)" )
PORT_CONFSETTING( 0x0000, DEF_STR( Japan ) )
PORT_CONFSETTING( 0x0040, "Hong Kong (Charterfield); no speedups" )
PORT_CONFSETTING( 0x0050, "Korea (Unite Trading); no speedups" )
PORT_CONFSETTING( 0x0060, "Taiwan; no speedups" )
PORT_CONFSETTING( 0x0070, "USA; no speedups" )
PORT_CONFSETTING( 0x0080, "Southeast Asia (Charterfield); no speedups" )
PORT_CONFSETTING( 0x0090, "Hong Kong (Charterfield)" )
PORT_CONFSETTING( 0x00a0, "Korea (Unite Trading)" )
PORT_CONFSETTING( 0x00b0, DEF_STR( Taiwan ) )
PORT_CONFSETTING( 0x00c0, "USA (Atari Games Corp.); no speedups" )
PORT_CONFSETTING( 0x00d0, "Southeast Asia (Charterfield)" )
PORT_CONFSETTING( 0x80e0, "Europe; no speedups" )
PORT_CONFSETTING( 0x00f0, "Japan (Taito Corp.)" )
INPUT_PORTS_END
static INPUT_PORTS_START( dogyuuna )
PORT_INCLUDE( dogyuun )
PORT_MODIFY("DSWA")
TOAPLAN_COINAGE_DUAL_LOC( JMPR, 0xf0, 0x30, SW1 )
PORT_MODIFY("JMPR")
// "No speedups": all speedup items in game are replaced with bombs
PORT_CONFNAME( 0x00f0, 0x0030, DEF_STR( Region ) ) //PORT_CONFLOCATION("JP:!4,!3,!2,!1")
PORT_CONFSETTING( 0x0030, DEF_STR( Europe ) )
PORT_CONFSETTING( 0x0010, DEF_STR( USA ) )
PORT_CONFSETTING( 0x0020, "USA (Atari Games Corp.)" )
PORT_CONFSETTING( 0x0000, DEF_STR( Japan ) )
PORT_CONFSETTING( 0x0040, "Hong Kong (Charterfield); no speedups" )
PORT_CONFSETTING( 0x0050, "Korea (Unite Trading); no speedups" )
PORT_CONFSETTING( 0x0060, "Taiwan; no speedups" )
// PORT_CONFSETTING( 0x0070, "Taiwan (Licensed to ???????); no speedups" )
PORT_CONFSETTING( 0x0080, "Southeast Asia (Charterfield); no speedups" )
PORT_CONFSETTING( 0x0090, "Hong Kong (Charterfield)" )
PORT_CONFSETTING( 0x00a0, "Korea (Unite Trading)" )
PORT_CONFSETTING( 0x00b0, DEF_STR( Taiwan ) )
// PORT_CONFSETTING( 0x00c0, "Taiwan (Licensed to ???????)" )
PORT_CONFSETTING( 0x00d0, "Southeast Asia (Charterfield)" )
// PORT_CONFSETTING( 0x00e0, DEF_STR( Unused ) )
PORT_CONFSETTING( 0x00f0, "Japan (Taito Corp.)" )
INPUT_PORTS_END
static INPUT_PORTS_START( dogyuunt )
PORT_INCLUDE( dogyuun )
PORT_MODIFY("DSWA")
TOAPLAN_COINAGE_DUAL_LOC( JMPR, 0xf0, 0x20, SW1 )
PORT_MODIFY("JMPR")
PORT_CONFNAME( 0x00f0, 0x0020, DEF_STR( Region ) ) //PORT_CONFLOCATION("JP:!4,!3,!2,!1")
PORT_CONFSETTING( 0x0020, DEF_STR( Europe ) )
PORT_CONFSETTING( 0x0010, DEF_STR( USA ) )
PORT_CONFSETTING( 0x0000, DEF_STR( Japan ) )
PORT_CONFSETTING( 0x0030, DEF_STR( Hong_Kong ) )
PORT_CONFSETTING( 0x0040, DEF_STR( Korea ) )
PORT_CONFSETTING( 0x0050, DEF_STR( Taiwan ) )
PORT_CONFSETTING( 0x0060, "Southeast Asia (Charterfield)" )
PORT_CONFSETTING( 0x0070, "USA (Romstar, Inc.)" )
PORT_CONFSETTING( 0x0080, "Hong Kong (Honest Trading Co.)" )
PORT_CONFSETTING( 0x0090, "Korea (JC Trading Corp.)" )
PORT_CONFSETTING( 0x00a0, "USA (Fabtek)" )
// PORT_CONFSETTING( 0x00b0, DEF_STR( Unused ) )
// PORT_CONFSETTING( 0x00c0, DEF_STR( Unused ) )
// PORT_CONFSETTING( 0x00d0, DEF_STR( Unused ) )
// PORT_CONFSETTING( 0x00e0, DEF_STR( Unused ) )
PORT_CONFSETTING( 0x00f0, "Japan (Taito Corp.)" )
INPUT_PORTS_END
static INPUT_PORTS_START( kbash )
PORT_INCLUDE( toaplan2_3b )
PORT_MODIFY("DSWA")
PORT_DIPNAME( 0x0001, 0x0000, DEF_STR( Continue_Price ) ) PORT_DIPLOCATION("SW1:!1")
PORT_DIPSETTING( 0x0000, DEF_STR( Normal ) )
PORT_DIPSETTING( 0x0001, "Discount" )
// Various features on bit mask 0x000e - see above
TOAPLAN_COINAGE_DUAL_LOC( JMPR, 0x70, 0x20, SW1 )
PORT_MODIFY("DSWB")
// Difficulty on bit mask 0x0003 - see above
PORT_DIPNAME( 0x000c, 0x0000, DEF_STR( Bonus_Life ) ) PORT_DIPLOCATION("SW2:!3,!4")
PORT_DIPSETTING( 0x000c, DEF_STR( None ) )
PORT_DIPSETTING( 0x0008, "200k only" )
PORT_DIPSETTING( 0x0004, "100k only" )
PORT_DIPSETTING( 0x0000, "100k and 400k" )
PORT_DIPNAME( 0x0030, 0x0000, DEF_STR( Lives ) ) PORT_DIPLOCATION("SW2:!5,!6")
PORT_DIPSETTING( 0x0030, "1" )
PORT_DIPSETTING( 0x0000, "2" )
PORT_DIPSETTING( 0x0020, "3" )
PORT_DIPSETTING( 0x0010, "4" )
PORT_DIPNAME( 0x0040, 0x0000, "Invulnerability (Cheat)" ) PORT_DIPLOCATION("SW2:!7")
PORT_DIPSETTING( 0x0000, DEF_STR( Off ) )
PORT_DIPSETTING( 0x0040, DEF_STR( On ) )
PORT_DIPNAME( 0x0080, 0x0000, DEF_STR( Allow_Continue ) ) PORT_DIPLOCATION("SW2:!8")
PORT_DIPSETTING( 0x0080, DEF_STR( No ) )
PORT_DIPSETTING( 0x0000, DEF_STR( Yes ) )
PORT_START("JMPR")
PORT_CONFNAME( 0x00f0, 0x0020, DEF_STR( Region ) ) //PORT_CONFLOCATION("JP:!4,!3,!2,!1")
PORT_CONFSETTING( 0x0020, "Europe, USA (Atari Games)" ) // European coinage
PORT_CONFSETTING( 0x0010, "USA, Europe (Atari Games)" )
PORT_CONFSETTING( 0x0000, DEF_STR( Japan ) )
PORT_CONFSETTING( 0x0030, DEF_STR( Korea ) )
PORT_CONFSETTING( 0x0040, DEF_STR( Hong_Kong ) )
PORT_CONFSETTING( 0x0050, DEF_STR( Taiwan ) )
PORT_CONFSETTING( 0x0060, DEF_STR( Southeast_Asia ) ) // Service Mode wrongly shows European coinage
// PORT_CONFSETTING( 0x0070, DEF_STR( Unused ) )
// PORT_CONFSETTING( 0x0080, DEF_STR( Unused ) )
PORT_CONFSETTING( 0x0090, DEF_STR( USA ) )
PORT_CONFSETTING( 0x00a0, DEF_STR( Europe ) ) // European coinage
// PORT_CONFSETTING( 0x00b0, DEF_STR( Unused ) )
// PORT_CONFSETTING( 0x00c0, DEF_STR( Unused ) )
// PORT_CONFSETTING( 0x00d0, DEF_STR( Unused ) )
// PORT_CONFSETTING( 0x00e0, DEF_STR( Unused ) ) // Service Mode wrongly shows European coinage
// PORT_CONFSETTING( 0x00f0, DEF_STR( Unused ) )
INPUT_PORTS_END
static INPUT_PORTS_START( kbashk )
PORT_INCLUDE( kbash )
PORT_MODIFY("JMPR")
PORT_CONFNAME( 0x00f0, 0x0000, DEF_STR( Region ) ) //PORT_CONFLOCATION("JP:!4,!3,!2,!1")
PORT_CONFSETTING( 0x0000, "Japan (Taito license)" ) // Taito license
PORT_CONFSETTING( 0x0010, DEF_STR( Unused ) )
PORT_CONFSETTING( 0x0020, DEF_STR( Unused ) )
PORT_CONFSETTING( 0x0030, DEF_STR( Korea ) )
PORT_CONFSETTING( 0x0040, DEF_STR( Hong_Kong ) )
PORT_CONFSETTING( 0x0050, DEF_STR( Taiwan ) )
PORT_CONFSETTING( 0x0060, DEF_STR( Southeast_Asia ) )
PORT_CONFSETTING( 0x0070, DEF_STR( Unused ) )
PORT_CONFSETTING( 0x0080, DEF_STR( Japan ) ) // no Taito license
PORT_CONFSETTING( 0x0090, DEF_STR( Unused ) )
PORT_CONFSETTING( 0x00a0, DEF_STR( Unused ) )
PORT_CONFSETTING( 0x00b0, DEF_STR( Korea ) )
PORT_CONFSETTING( 0x00c0, DEF_STR( Hong_Kong ))
PORT_CONFSETTING( 0x00d0, DEF_STR( Taiwan ))
PORT_CONFSETTING( 0x00e0, DEF_STR( Southeast_Asia ))
PORT_CONFSETTING( 0x00f0, DEF_STR( Unused ) )
INPUT_PORTS_END
static INPUT_PORTS_START( kbash2 )
PORT_INCLUDE( kbash )
PORT_MODIFY("DSWA")
TOAPLAN_COINAGE_DUAL_LOC( JMPR, 0x07, 0x02, SW1 )
PORT_MODIFY("JMPR")
PORT_CONFNAME( 0x000f, 0x0006, DEF_STR( Region ) ) //PORT_CONFLOCATION("JP:!4,!3,!2,!1")
PORT_CONFSETTING( 0x0000, "Japan (Taito Corp.)" )
// PORT_CONFSETTING( 0x0001, DEF_STR( Unused ) )
// PORT_CONFSETTING( 0x0002, DEF_STR( Unused ) ) // European coinage
PORT_CONFSETTING( 0x0003, "Korea (Unite Trading)" )
PORT_CONFSETTING( 0x0004, DEF_STR( Hong_Kong ) )
PORT_CONFSETTING( 0x0005, DEF_STR( Taiwan ) )
PORT_CONFSETTING( 0x0006, "Southeast Asia (Charterfield)" ) // Service Mode wrongly shows European coinage
// PORT_CONFSETTING( 0x0007, DEF_STR( Unused ) )
PORT_CONFSETTING( 0x0008, DEF_STR( Japan ) )
// PORT_CONFSETTING( 0x0009, DEF_STR( Unused ) )
// PORT_CONFSETTING( 0x000a, DEF_STR( Unused ) ) // European coinage
PORT_CONFSETTING( 0x000b, DEF_STR( Korea ) )
// PORT_CONFSETTING( 0x000c, DEF_STR( Hong_Kong ) )
// PORT_CONFSETTING( 0x000d, DEF_STR( Taiwan ) )
PORT_CONFSETTING( 0x000e, DEF_STR( Southeast_Asia ) ) // Service Mode wrongly shows European coinage
// PORT_CONFSETTING( 0x000f, DEF_STR( Unused ) )
PORT_BIT( 0x00f0, IP_ACTIVE_HIGH, IPT_UNKNOWN )
INPUT_PORTS_END
static INPUT_PORTS_START( truxton2 )
PORT_INCLUDE( toaplan2_3b )
PORT_MODIFY("IN1")
PORT_BIT( 0x0080, IP_ACTIVE_HIGH, IPT_OTHER ) PORT_NAME("Fast Scrolling (Cheat)")
PORT_MODIFY("DSWA")
PORT_DIPNAME( 0x0001, 0x0000, "Rapid Fire" ) PORT_DIPLOCATION("SW1:!1")
PORT_DIPSETTING( 0x0001, DEF_STR( Off ) )
PORT_DIPSETTING( 0x0000, DEF_STR( On ) )
// Various features on bit mask 0x000e - see above
TOAPLAN_COINAGE_DUAL_LOC( JMPR, 0x0f, 0x02, SW1 )
PORT_MODIFY("DSWB")
// Difficulty on bit mask 0x0003 - see above
PORT_DIPNAME( 0x000c, 0x0000, DEF_STR( Bonus_Life ) ) PORT_DIPLOCATION("SW2:!3,!4")
PORT_DIPSETTING( 0x000c, "200k only" )
PORT_DIPSETTING( 0x0008, "100k only" )
PORT_DIPSETTING( 0x0004, "100k and 250k" )
PORT_DIPSETTING( 0x0000, "70k and 200k" )
PORT_DIPNAME( 0x0030, 0x0000, DEF_STR( Lives ) ) PORT_DIPLOCATION("SW2:!5,!6")
PORT_DIPSETTING( 0x0030, "2" )
PORT_DIPSETTING( 0x0000, "3" )
PORT_DIPSETTING( 0x0020, "4" )
PORT_DIPSETTING( 0x0010, "5" )
PORT_DIPNAME( 0x0040, 0x0000, "Invulnerability (Cheat)" ) PORT_DIPLOCATION("SW2:!7")
PORT_DIPSETTING( 0x0000, DEF_STR( Off ) )
PORT_DIPSETTING( 0x0040, DEF_STR( On ) )
PORT_DIPNAME( 0x0080, 0x0000, DEF_STR( Allow_Continue ) ) PORT_DIPLOCATION("SW2:!8")
PORT_DIPSETTING( 0x0080, DEF_STR( No ) )
PORT_DIPSETTING( 0x0000, DEF_STR( Yes ) )
PORT_START("JMPR")
PORT_CONFNAME( 0x000f, 0x0002, DEF_STR( Region ) ) //PORT_CONFLOCATION("JP:!4,!3,!2,!1")
PORT_CONFSETTING( 0x0002, DEF_STR( Europe ) )
PORT_CONFSETTING( 0x0001, DEF_STR( USA ) )
PORT_CONFSETTING( 0x0000, DEF_STR( Japan ) )
PORT_CONFSETTING( 0x0003, DEF_STR( Hong_Kong ) )
PORT_CONFSETTING( 0x0004, DEF_STR( Korea ) )
PORT_CONFSETTING( 0x0005, DEF_STR( Taiwan ) )
PORT_CONFSETTING( 0x0006, "Southeast Asia (Charterfield)" )
PORT_CONFSETTING( 0x0007, "USA (Romstar, Inc.)" )
PORT_CONFSETTING( 0x0008, "Hong Kong (Honest Trading Co.)" )
PORT_CONFSETTING( 0x0009, "Korea (JC Trading Corp.)" )
PORT_CONFSETTING( 0x000a, "USA (Fabtek)" )
// PORT_CONFSETTING( 0x000b, DEF_STR( Unused ) )
// PORT_CONFSETTING( 0x000c, DEF_STR( Unused ) )
// PORT_CONFSETTING( 0x000d, DEF_STR( Unused ) )
// PORT_CONFSETTING( 0x000e, DEF_STR( Unused ) )
PORT_CONFSETTING( 0x000f, "Japan (Taito Corp.)" )
INPUT_PORTS_END
static INPUT_PORTS_START( pipibibs )
PORT_INCLUDE( toaplan2_2b )
PORT_MODIFY("DSWA")
// Various features on bit mask 0x000f - see above
TOAPLAN_COINAGE_DUAL_LOC( JMPR, 0x06, 0x06, SW1 )
PORT_MODIFY("DSWB")
// Difficulty on bit mask 0x0003 - see above
PORT_DIPNAME( 0x000c, 0x0000, DEF_STR( Bonus_Life ) ) PORT_DIPLOCATION("SW2:!3,!4")
PORT_DIPSETTING( 0x000c, DEF_STR( None ) )
PORT_DIPSETTING( 0x0008, "200k only" )
PORT_DIPSETTING( 0x0000, "200k and every 300k" )
PORT_DIPSETTING( 0x0004, "150k and every 200k" )
PORT_DIPNAME( 0x0030, 0x0000, DEF_STR( Lives ) ) PORT_DIPLOCATION("SW2:!5,!6")
PORT_DIPSETTING( 0x0030, "1" )
PORT_DIPSETTING( 0x0020, "2" )
PORT_DIPSETTING( 0x0000, "3" )
PORT_DIPSETTING( 0x0010, "5" )
PORT_DIPNAME( 0x0040, 0x0000, "Invulnerability (Cheat)" ) PORT_DIPLOCATION("SW2:!7")
PORT_DIPSETTING( 0x0000, DEF_STR( Off ) )
PORT_DIPSETTING( 0x0040, DEF_STR( On ) )
PORT_DIPNAME( 0x0080, 0x0000, DEF_STR( Unused ) ) PORT_DIPLOCATION("SW2:!8")
PORT_DIPSETTING( 0x0000, DEF_STR( Off ) )
PORT_DIPSETTING( 0x0080, DEF_STR( On ) )
PORT_START("JMPR")
PORT_CONFNAME( 0x0008, 0x0000, "Nudity" ) //PORT_CONFLOCATION("JP:!1")
PORT_CONFSETTING( 0x0008, DEF_STR( Low ) )
PORT_CONFSETTING( 0x0000, "High, but censored" )
PORT_CONFNAME( 0x0007, 0x0006, DEF_STR( Region ) ) //PORT_CONFLOCATION("JP:!4,!3,!2")
PORT_CONFSETTING( 0x0006, DEF_STR( Europe ) )
PORT_CONFSETTING( 0x0004, DEF_STR( USA ) )
PORT_CONFSETTING( 0x0000, DEF_STR( Japan ) )
PORT_CONFSETTING( 0x0001, DEF_STR( Asia ) )
PORT_CONFSETTING( 0x0002, "Hong Kong (Honest Trading Co.)" )
PORT_CONFSETTING( 0x0003, DEF_STR( Taiwan ) )
PORT_CONFSETTING( 0x0005, "USA (Romstar, Inc.)" )
PORT_CONFSETTING( 0x0007, "Europe (Nova Apparate GMBH & Co.)" )
INPUT_PORTS_END
static INPUT_PORTS_START( pipibibsp )
PORT_INCLUDE( pipibibs )
PORT_MODIFY("DSWA")
// Various features on bit mask 0x000d - see above
TOAPLAN_COINAGE_DUAL_LOC( JMPR, 0x80000, 0x80000, SW1 )
PORT_MODIFY("JMPR")
// Bit Mask 0x80000 is used here to signify European Coinage for MAME purposes - not read on the real board!
PORT_CONFNAME( 0x80007, 0x00002, DEF_STR( Region ) ) //PORT_CONFLOCATION("JP:!4,!3,!2,FAKE:!1")
PORT_CONFSETTING( 0x00002, DEF_STR( World ) )
PORT_CONFSETTING( 0x80005, DEF_STR( Europe ) )
PORT_CONFSETTING( 0x00004, DEF_STR( USA ) )
PORT_CONFSETTING( 0x00000, "Japan (Ryouta Kikaku)" )
PORT_CONFSETTING( 0x00001, "Hong Kong (Honest Trading Co.)" )
PORT_CONFSETTING( 0x80006, "Spain & Portugal (APM Electronics S.A.)" )
PORT_CONFSETTING( 0x00007, "World (Ryouta Kikaku)" )
INPUT_PORTS_END
static INPUT_PORTS_START( whoopee )
PORT_INCLUDE( pipibibs )
PORT_MODIFY("JMPR")
PORT_BIT( 0x0010, IP_ACTIVE_HIGH, IPT_SPECIAL ) PORT_CUSTOM_MEMBER(DEVICE_SELF, toaplan2_state,c2map_r, nullptr) // bit 0x10 sound ready
INPUT_PORTS_END
static INPUT_PORTS_START( pipibibsbl )
PORT_INCLUDE( pipibibs )
PORT_MODIFY("DSWA")
PORT_DIPNAME( 0x0002, 0x0000, DEF_STR( Unused ) ) PORT_DIPLOCATION("SW1:!2") // In Test Mode, it shows as Normal/Invert Screen - HW doesn't support it
PORT_DIPSETTING( 0x0000, DEF_STR( Off ) )
PORT_DIPSETTING( 0x0002, DEF_STR( On ) )
// Various features on bit mask 0x000d - see above
TOAPLAN_COINAGE_DUAL_LOC( JMPR, 0x80000, 0x80000, SW1 )
PORT_MODIFY("JMPR")
// Bit Mask 0x80000 is used here to signify European Coinage for MAME purposes - not read on the real board!
PORT_CONFNAME( 0x80007, 0x00002, DEF_STR( Region ) ) //PORT_CONFLOCATION("JP:!4,!3,!2,FAKE:!1")
PORT_CONFSETTING( 0x00002, DEF_STR( World ) )
PORT_CONFSETTING( 0x80005, DEF_STR( Europe ) )
PORT_CONFSETTING( 0x00004, DEF_STR( USA ) )
PORT_CONFSETTING( 0x00000, "Japan (Ryouta Kikaku)" )
PORT_CONFSETTING( 0x00001, "Hong Kong (Honest Trading Co.)" )
PORT_CONFSETTING( 0x80006, "Spain & Portugal (APM Electronics S.A.)" )
PORT_CONFSETTING( 0x00007, "World (Ryouta Kikaku)" )
INPUT_PORTS_END
static INPUT_PORTS_START( fixeight )
// The Suicide buttons are technically P1 and P2 Button 3, but we hook
// them up as IPT_OTHER so each player has the same number of buttons.
PORT_START("IN1")
PORT_BIT( 0x0001, IP_ACTIVE_HIGH, IPT_JOYSTICK_UP ) PORT_PLAYER(1) PORT_8WAY
PORT_BIT( 0x0002, IP_ACTIVE_HIGH, IPT_JOYSTICK_DOWN ) PORT_PLAYER(1) PORT_8WAY
PORT_BIT( 0x0004, IP_ACTIVE_HIGH, IPT_JOYSTICK_LEFT ) PORT_PLAYER(1) PORT_8WAY
PORT_BIT( 0x0008, IP_ACTIVE_HIGH, IPT_JOYSTICK_RIGHT ) PORT_PLAYER(1) PORT_8WAY
PORT_BIT( 0x0010, IP_ACTIVE_HIGH, IPT_BUTTON1 ) PORT_PLAYER(1)
PORT_BIT( 0x0020, IP_ACTIVE_HIGH, IPT_BUTTON2 ) PORT_PLAYER(1)
PORT_BIT( 0x0040, IP_ACTIVE_HIGH, IPT_OTHER ) PORT_NAME("P1 Suicide (Cheat)")
PORT_BIT( 0x0080, IP_ACTIVE_HIGH, IPT_UNKNOWN )
PORT_BIT( 0xff00, IP_ACTIVE_HIGH, IPT_UNKNOWN ) // Unknown/Unused
PORT_START("IN2")
PORT_BIT( 0x0001, IP_ACTIVE_HIGH, IPT_JOYSTICK_UP ) PORT_PLAYER(2) PORT_8WAY
PORT_BIT( 0x0002, IP_ACTIVE_HIGH, IPT_JOYSTICK_DOWN ) PORT_PLAYER(2) PORT_8WAY
PORT_BIT( 0x0004, IP_ACTIVE_HIGH, IPT_JOYSTICK_LEFT ) PORT_PLAYER(2) PORT_8WAY
PORT_BIT( 0x0008, IP_ACTIVE_HIGH, IPT_JOYSTICK_RIGHT ) PORT_PLAYER(2) PORT_8WAY
PORT_BIT( 0x0010, IP_ACTIVE_HIGH, IPT_BUTTON1 ) PORT_PLAYER(2)
PORT_BIT( 0x0020, IP_ACTIVE_HIGH, IPT_BUTTON2 ) PORT_PLAYER(2)
PORT_BIT( 0x0040, IP_ACTIVE_HIGH, IPT_OTHER ) PORT_NAME("P2 Suicide (Cheat)")
PORT_BIT( 0x0080, IP_ACTIVE_HIGH, IPT_UNKNOWN )
PORT_BIT( 0xff00, IP_ACTIVE_HIGH, IPT_UNKNOWN ) // Unknown/Unused
PORT_START("IN3")
PORT_BIT( 0x0001, IP_ACTIVE_HIGH, IPT_JOYSTICK_UP ) PORT_PLAYER(3) PORT_8WAY
PORT_BIT( 0x0002, IP_ACTIVE_HIGH, IPT_JOYSTICK_DOWN ) PORT_PLAYER(3) PORT_8WAY
PORT_BIT( 0x0004, IP_ACTIVE_HIGH, IPT_JOYSTICK_LEFT ) PORT_PLAYER(3) PORT_8WAY
PORT_BIT( 0x0008, IP_ACTIVE_HIGH, IPT_JOYSTICK_RIGHT ) PORT_PLAYER(3) PORT_8WAY
PORT_BIT( 0x0010, IP_ACTIVE_HIGH, IPT_BUTTON1 ) PORT_PLAYER(3)
PORT_BIT( 0x0020, IP_ACTIVE_HIGH, IPT_BUTTON2 ) PORT_PLAYER(3)
PORT_BIT( 0x0040, IP_ACTIVE_HIGH, IPT_START3 )
PORT_BIT( 0x0080, IP_ACTIVE_HIGH, IPT_UNKNOWN )
PORT_BIT( 0xff00, IP_ACTIVE_HIGH, IPT_UNKNOWN ) // Unknown/Unused
PORT_START("SYS")
PORT_BIT( 0x0001, IP_ACTIVE_HIGH, IPT_COIN3 )
PORT_BIT( 0x0002, IP_ACTIVE_HIGH, IPT_TILT )
PORT_SERVICE_NO_TOGGLE(0x0004, IP_ACTIVE_HIGH) // Service input is a pushbutton marked 'Test SW'
PORT_BIT( 0x0008, IP_ACTIVE_HIGH, IPT_COIN1 )
PORT_BIT( 0x0010, IP_ACTIVE_HIGH, IPT_COIN2 )
PORT_BIT( 0x0020, IP_ACTIVE_HIGH, IPT_START1 )
PORT_BIT( 0x0040, IP_ACTIVE_HIGH, IPT_START2 )
PORT_BIT( 0x0080, IP_ACTIVE_HIGH, IPT_UNKNOWN )
PORT_BIT( 0xff00, IP_ACTIVE_HIGH, IPT_UNKNOWN ) // Unknown/Unused
PORT_START("EEPROM")
PORT_BIT( 0x0010, IP_ACTIVE_HIGH, IPT_OUTPUT ) PORT_WRITE_LINE_DEVICE_MEMBER("eeprom", eeprom_serial_93cxx_device, cs_write)
PORT_BIT( 0x0020, IP_ACTIVE_HIGH, IPT_OUTPUT ) PORT_WRITE_LINE_DEVICE_MEMBER("eeprom", eeprom_serial_93cxx_device, clk_write)
PORT_BIT( 0x0040, IP_ACTIVE_HIGH, IPT_OUTPUT ) PORT_WRITE_LINE_DEVICE_MEMBER("eeprom", eeprom_serial_93cxx_device, di_write)
PORT_BIT( 0x0080, IP_ACTIVE_HIGH, IPT_SPECIAL ) PORT_READ_LINE_DEVICE_MEMBER("eeprom", eeprom_serial_93cxx_device, do_read)
INPUT_PORTS_END
static INPUT_PORTS_START( fixeightbl )
PORT_INCLUDE( toaplan2_2b )
PORT_MODIFY("SYS")
PORT_BIT( 0x0001, IP_ACTIVE_HIGH, IPT_COIN3 )
PORT_SERVICE_NO_TOGGLE(0x0004, IP_ACTIVE_HIGH) // Service input is a pushbutton marked 'Test SW'
PORT_START("IN3")
PORT_BIT( 0x0001, IP_ACTIVE_HIGH, IPT_JOYSTICK_UP ) PORT_PLAYER(3) PORT_8WAY
PORT_BIT( 0x0002, IP_ACTIVE_HIGH, IPT_JOYSTICK_DOWN ) PORT_PLAYER(3) PORT_8WAY
PORT_BIT( 0x0004, IP_ACTIVE_HIGH, IPT_JOYSTICK_LEFT ) PORT_PLAYER(3) PORT_8WAY
PORT_BIT( 0x0008, IP_ACTIVE_HIGH, IPT_JOYSTICK_RIGHT ) PORT_PLAYER(3) PORT_8WAY
PORT_BIT( 0x0010, IP_ACTIVE_HIGH, IPT_BUTTON1 ) PORT_PLAYER(3)
PORT_BIT( 0x0020, IP_ACTIVE_HIGH, IPT_BUTTON2 ) PORT_PLAYER(3)
PORT_BIT( 0x0040, IP_ACTIVE_HIGH, IPT_START3 )
PORT_BIT( 0x0080, IP_ACTIVE_HIGH, IPT_UNKNOWN )
PORT_BIT( 0xff00, IP_ACTIVE_HIGH, IPT_UNKNOWN ) // Unknown/Unused
PORT_MODIFY("DSWA")
PORT_DIPNAME( 0x0001, 0x0000, "Maximum Players" ) PORT_DIPLOCATION("SW1:!1")
PORT_DIPSETTING( 0x0000, "2" )
PORT_DIPSETTING( 0x0001, "3" )
PORT_DIPNAME( 0x0002, 0x0000, DEF_STR( Unused ) ) PORT_DIPLOCATION("SW1:!2") // This video HW doesn't support flip screen
PORT_DIPSETTING( 0x0000, DEF_STR( Off ) )
PORT_DIPSETTING( 0x0002, DEF_STR( On ) )
PORT_DIPNAME( 0x0004, 0x0004, "Shooting Style" ) PORT_DIPLOCATION("SW1:!3")
PORT_DIPSETTING( 0x0004, "Semi-Auto" )
PORT_DIPSETTING( 0x0000, "Full-Auto" )
// Various features on bit mask 0x0008 - see above
TOAPLAN_COINAGE_JAPAN_LOC(SW1)
PORT_MODIFY("DSWB")
// Difficulty on bit mask 0x0003 - see above
PORT_DIPNAME( 0x000c, 0x0000, DEF_STR( Bonus_Life ) ) PORT_DIPLOCATION("SW2:!3,!4")
PORT_DIPSETTING( 0x000c, DEF_STR( None ) )
PORT_DIPSETTING( 0x0000, "500k and every 500k" )
PORT_DIPSETTING( 0x0008, "300k only" )
PORT_DIPSETTING( 0x0004, "300k and every 300k" )
PORT_DIPNAME( 0x0030, 0x0000, DEF_STR( Lives ) ) PORT_DIPLOCATION("SW2:!5,!6")
PORT_DIPSETTING( 0x0030, "1" )
PORT_DIPSETTING( 0x0020, "2" )
PORT_DIPSETTING( 0x0000, "3" )
PORT_DIPSETTING( 0x0010, "5" )
PORT_DIPNAME( 0x0040, 0x0000, "Invulnerability (Cheat)" ) PORT_DIPLOCATION("SW2:!7")
PORT_DIPSETTING( 0x0000, DEF_STR( Off ) )
PORT_DIPSETTING( 0x0040, DEF_STR( On ) )
PORT_DIPNAME( 0x0080, 0x0000, DEF_STR( Allow_Continue ) ) PORT_DIPLOCATION("SW2:!8")
PORT_DIPSETTING( 0x0080, DEF_STR( No ) )
PORT_DIPSETTING( 0x0000, DEF_STR( Yes ) )
INPUT_PORTS_END
static INPUT_PORTS_START( grindstm )
PORT_INCLUDE( toaplan2_2b )
PORT_MODIFY("DSWA")
PORT_DIPNAME( 0x0001, 0x0000, DEF_STR( Cabinet ) ) PORT_DIPLOCATION("SW1:!1")
PORT_DIPSETTING( 0x0000, DEF_STR( Upright ) )
PORT_DIPSETTING( 0x0001, DEF_STR( Cocktail ) )
// Various features on bit mask 0x000e - see above
TOAPLAN_COINAGE_DUAL_LOC( JMPR, 0xe0, 0x80, SW1 )
PORT_MODIFY("DSWB")
// Difficulty on bit mask 0x0003 - see above
PORT_DIPNAME( 0x000c, 0x0000, DEF_STR( Bonus_Life ) ) PORT_DIPLOCATION("SW2:!3,!4")
PORT_DIPSETTING( 0x000c, DEF_STR( None ) )
PORT_DIPSETTING( 0x0008, "200k only" )
PORT_DIPSETTING( 0x0000, "300k and 800k" )
PORT_DIPSETTING( 0x0004, "300k and every 800k" )
PORT_DIPNAME( 0x0030, 0x0000, DEF_STR( Lives ) ) PORT_DIPLOCATION("SW2:!5,!6")
PORT_DIPSETTING( 0x0030, "1" )
PORT_DIPSETTING( 0x0020, "2" )
PORT_DIPSETTING( 0x0000, "3" )
PORT_DIPSETTING( 0x0010, "5" )
PORT_DIPNAME( 0x0040, 0x0000, "Invulnerability (Cheat)" ) PORT_DIPLOCATION("SW2:!7")
PORT_DIPSETTING( 0x0000, DEF_STR( Off ) )
PORT_DIPSETTING( 0x0040, DEF_STR( On ) )
PORT_DIPNAME( 0x0080, 0x0000, DEF_STR( Allow_Continue ) ) PORT_DIPLOCATION("SW2:!8")
PORT_DIPSETTING( 0x0080, DEF_STR( No ) )
PORT_DIPSETTING( 0x0000, DEF_STR( Yes ) )
PORT_START("JMPR")
// Code in many places in game tests if region is >= 0xC. Effects on gameplay?
PORT_CONFNAME( 0x00f0, 0x0090, DEF_STR( Region ) ) //PORT_CONFLOCATION("JP:!4,!3,!2,!1")
PORT_CONFSETTING( 0x0090, DEF_STR( Europe ) )
// PORT_CONFSETTING( 0x0080, DEF_STR( Europe ) )
PORT_CONFSETTING( 0x00b0, DEF_STR( USA ) )
PORT_CONFSETTING( 0x00a0, "USA (American Sammy Corporation)" )
PORT_CONFSETTING( 0x0070, DEF_STR( Southeast_Asia ) )
PORT_CONFSETTING( 0x0060, "Southeast Asia (Charterfield)" )
PORT_CONFSETTING( 0x0050, DEF_STR( Taiwan ) )
PORT_CONFSETTING( 0x0040, "Taiwan (Anomoto International Inc.)" )
PORT_CONFSETTING( 0x0030, DEF_STR( Hong_Kong ) )
PORT_CONFSETTING( 0x0020, "Hong Kong (Charterfield)" )
PORT_CONFSETTING( 0x0010, DEF_STR( Korea ) )
PORT_CONFSETTING( 0x0000, "Korea (Unite Trading)" )
PORT_CONFSETTING( 0x00d0, "USA; different?" )
PORT_CONFSETTING( 0x00c0, "USA (American Sammy Corporation); different?" )
PORT_CONFSETTING( 0x00e0, "Korea; different?" )
// PORT_CONFSETTING( 0x00f0, "Korea; different?" )
INPUT_PORTS_END
static INPUT_PORTS_START( grindstma )
PORT_INCLUDE( grindstm )
PORT_MODIFY("JMPR")
// Code in many places in game tests if region is >= 0xC. Effects on gameplay?
PORT_CONFNAME( 0x00f0, 0x0090, DEF_STR( Region ) ) //PORT_CONFLOCATION("JP:!4,!3,!2,!1")
PORT_CONFSETTING( 0x0090, DEF_STR( Europe ) )
// PORT_CONFSETTING( 0x0080, DEF_STR( Europe ) )
PORT_CONFSETTING( 0x00b0, DEF_STR( USA ) )
PORT_CONFSETTING( 0x00a0, "USA (Atari Games Corp.)" )
PORT_CONFSETTING( 0x0070, DEF_STR( Southeast_Asia ) )
PORT_CONFSETTING( 0x0060, "Southeast Asia (Charterfield)" )
PORT_CONFSETTING( 0x0050, DEF_STR( Taiwan ) )
// PORT_CONFSETTING( 0x0040, DEF_STR( Taiwan ) )
PORT_CONFSETTING( 0x0030, DEF_STR( Hong_Kong ) )
PORT_CONFSETTING( 0x0020, "Hong Kong (Charterfield)" )
PORT_CONFSETTING( 0x0010, DEF_STR( Korea ) )
PORT_CONFSETTING( 0x0000, "Korea (Unite Trading)" )
PORT_CONFSETTING( 0x00c0, "Korea; different?" )
// PORT_CONFSETTING( 0x00d0, "Korea; different?" )
// PORT_CONFSETTING( 0x00e0, "Korea; different?" )
// PORT_CONFSETTING( 0x00f0, "Korea; different?" )
INPUT_PORTS_END
static INPUT_PORTS_START( vfive )
PORT_INCLUDE( grindstm )
PORT_MODIFY("DSWA")
TOAPLAN_COINAGE_JAPAN_LOC(SW1)
PORT_MODIFY("JMPR")
// Region is forced to Japan in this set.
// Code at $9238 tests bit 7.
// (Actually bit 3, but the V25 shifts the jumper byte before storing it in shared RAM)
// Runs twice near end of stage 1, once when each of the two boss tanks appears. Effect?
// Also, if bit 7 is set and bits 6-5 are clear, service mode wrongly shows European coinage
// (due to code left in from Grind Stormer: see code at $210A4 and lookup table at $211FA)
PORT_CONFNAME( 0x0030, 0x0000, "Copyright" ) //PORT_CONFLOCATION("JP:!4,!3")
PORT_CONFSETTING( 0x0000, "All Rights Reserved" )
// PORT_CONFSETTING( 0x0010, "All Rights Reserved" )
// PORT_CONFSETTING( 0x0020, "All Rights Reserved" )
PORT_CONFSETTING( 0x0030, "Licensed to Taito Corp." )
PORT_CONFNAME( 0x0040, 0x0000, DEF_STR( Unused ) ) //PORT_CONFLOCATION("JP:!2")
PORT_CONFSETTING( 0x0000, DEF_STR( Off ) )
PORT_CONFSETTING( 0x0040, DEF_STR( On ) )
PORT_CONFNAME( 0x0080, 0x0000, DEF_STR( Unknown ) ) //PORT_CONFLOCATION("JP:!1")
PORT_CONFSETTING( 0x0000, DEF_STR( Off ) )
PORT_CONFSETTING( 0x0080, DEF_STR( On ) )
INPUT_PORTS_END
static INPUT_PORTS_START( batsugun )
PORT_INCLUDE( toaplan2_3b )
PORT_MODIFY("DSWA")
PORT_DIPNAME( 0x0001, 0x0000, DEF_STR( Continue_Price ) ) PORT_DIPLOCATION("SW1:!1")
PORT_DIPSETTING( 0x0000, DEF_STR( Normal ) )
PORT_DIPSETTING( 0x0001, "Discount" )
// Various features on bit mask 0x000e - see above
TOAPLAN_COINAGE_JAPAN_LOC(SW1) // European coinage shown in Service Mode but not actually used
PORT_MODIFY("DSWB")
// Difficulty on bit mask 0x0003 - see above
PORT_DIPNAME( 0x000c, 0x0000, DEF_STR( Bonus_Life ) ) PORT_DIPLOCATION("SW2:!3,!4")
PORT_DIPSETTING( 0x000c, DEF_STR( None ) )
PORT_DIPSETTING( 0x0008, "1500k only" )
PORT_DIPSETTING( 0x0000, "1000k only" )
PORT_DIPSETTING( 0x0004, "500k and every 600k" )
PORT_DIPNAME( 0x0030, 0x0000, DEF_STR( Lives ) ) PORT_DIPLOCATION("SW2:!5,!6")
PORT_DIPSETTING( 0x0030, "1" )
PORT_DIPSETTING( 0x0020, "2" )
PORT_DIPSETTING( 0x0000, "3" )
PORT_DIPSETTING( 0x0010, "5" )
PORT_DIPNAME( 0x0040, 0x0000, "Invulnerability (Cheat)" ) PORT_DIPLOCATION("SW2:!7")
PORT_DIPSETTING( 0x0000, DEF_STR( Off ) )
PORT_DIPSETTING( 0x0040, DEF_STR( On ) )
PORT_DIPNAME( 0x0080, 0x0000, DEF_STR( Allow_Continue ) ) PORT_DIPLOCATION("SW2:!8")
PORT_DIPSETTING( 0x0080, DEF_STR( No ) )
PORT_DIPSETTING( 0x0000, DEF_STR( Yes ) )
PORT_START("JMPR")
PORT_CONFNAME( 0x00f0, 0x0090, DEF_STR( Region ) ) //PORT_CONFLOCATION("JP:!4,!3,!2,!1")
PORT_CONFSETTING( 0x0090, DEF_STR( Europe ) )
PORT_CONFSETTING( 0x0080, "Europe (Taito Corp.)" )
PORT_CONFSETTING( 0x00b0, DEF_STR( USA ) )
PORT_CONFSETTING( 0x00a0, "USA (Taito Corp.)" )
PORT_CONFSETTING( 0x00f0, DEF_STR( Japan ) )
// PORT_CONFSETTING( 0x00e0, DEF_STR( Japan ) )
PORT_CONFSETTING( 0x00d0, "Japan (Taito Corp.)" )
// PORT_CONFSETTING( 0x00c0, "Japan (Taito Corp.)" )
PORT_CONFSETTING( 0x0070, DEF_STR( Southeast_Asia ) )
PORT_CONFSETTING( 0x0060, "Southeast Asia (Taito Corp.)" )
PORT_CONFSETTING( 0x0050, DEF_STR( Taiwan ) )
PORT_CONFSETTING( 0x0040, "Taiwan (Taito Corp.)" )
PORT_CONFSETTING( 0x0030, DEF_STR( Hong_Kong ) )
PORT_CONFSETTING( 0x0020, "Hong Kong (Taito Corp.)" )
PORT_CONFSETTING( 0x0010, DEF_STR( Korea ) )
PORT_CONFSETTING( 0x0000, "Korea (Unite Trading)" )
INPUT_PORTS_END
CUSTOM_INPUT_MEMBER(toaplan2_state::pwrkick_hopper_status_r)
{
/* TODO: hopper mechanism */
return machine().rand() & 1;
//return m_pwrkick_hopper & (machine().rand() & 1);
}
static INPUT_PORTS_START( pwrkick )
PORT_START("DSWA")
PORT_DIPNAME( 0x03, 0x00, DEF_STR( Difficulty ) )
PORT_DIPSETTING( 0x00, DEF_STR( Easy ) )
PORT_DIPSETTING( 0x01, DEF_STR( Normal ) )
PORT_DIPSETTING( 0x02, DEF_STR( Hard ) )
PORT_DIPSETTING( 0x03, DEF_STR( Very_Hard ) )
PORT_DIPNAME( 0x1c, 0x00, "Payout" )
PORT_DIPSETTING( 0x00, "1" )
PORT_DIPSETTING( 0x04, "2" )
PORT_DIPSETTING( 0x08, "3" )
PORT_DIPSETTING( 0x0c, "4" )
PORT_DIPSETTING( 0x10, "5" )
PORT_DIPSETTING( 0x14, "6" )
PORT_DIPSETTING( 0x18, "7" )
PORT_DIPSETTING( 0x1c, "8" )
PORT_DIPNAME( 0x20, 0x00, DEF_STR( Demo_Sounds ) )
PORT_DIPSETTING( 0x20, DEF_STR( Off ) )
PORT_DIPSETTING( 0x00, DEF_STR( On ) )
PORT_DIPNAME( 0x40, 0x00, DEF_STR( Unused ) )
PORT_DIPSETTING( 0x00, DEF_STR( Off ) )
PORT_DIPSETTING( 0x40, DEF_STR( On ) )
PORT_DIPNAME( 0x80, 0x00, "Diagnostic" )
PORT_DIPSETTING( 0x00, DEF_STR( Off ) )
PORT_DIPSETTING( 0x80, DEF_STR( On ) )
PORT_START("DSWB")
PORT_DIPNAME( 0x03, 0x00, "Play Credit" )
PORT_DIPSETTING( 0x00, "10 \xC2\xA5" )
PORT_DIPSETTING( 0x01, "20 \xC2\xA5" )
PORT_DIPSETTING( 0x02, "30 \xC2\xA5" )
PORT_DIPSETTING( 0x03, "40 \xC2\xA5" )
PORT_DIPNAME( 0x0c, 0x00, "Coin Exchange" )
PORT_DIPSETTING( 0x00, "12" )
PORT_DIPSETTING( 0x04, "10" )
PORT_DIPSETTING( 0x08, "6" )
PORT_DIPSETTING( 0x0c, "5" )
PORT_DIPNAME( 0x30, 0x00, "Game Mode" )
PORT_DIPSETTING( 0x00, DEF_STR( Normal ) )
PORT_DIPSETTING( 0x10, "Shot" )
PORT_DIPSETTING( 0x20, "Auto" )
PORT_DIPSETTING( 0x30, "S-Manual" )
PORT_DIPNAME( 0x40, 0x00, DEF_STR( Unused ) )
PORT_DIPSETTING( 0x00, DEF_STR( Off ) )
PORT_DIPSETTING( 0x40, DEF_STR( On ) )
PORT_DIPNAME( 0x80, 0x00, DEF_STR( Unused ) )
PORT_DIPSETTING( 0x00, DEF_STR( Off ) )
PORT_DIPSETTING( 0x80, DEF_STR( On ) )
PORT_START("DSWC")
PORT_DIPNAME( 0x01, 0x00, "DSWC" )
PORT_DIPSETTING( 0x00, DEF_STR( Off ) )
PORT_DIPSETTING( 0x01, DEF_STR( On ) )
PORT_DIPNAME( 0x02, 0x00, DEF_STR( Unknown ) )
PORT_DIPSETTING( 0x00, DEF_STR( Off ) )
PORT_DIPSETTING( 0x02, DEF_STR( On ) )
PORT_DIPNAME( 0x04, 0x00, DEF_STR( Unknown ) )
PORT_DIPSETTING( 0x00, DEF_STR( Off ) )
PORT_DIPSETTING( 0x04, DEF_STR( On ) )
PORT_DIPNAME( 0x08, 0x00, DEF_STR( Unknown ) )
PORT_DIPSETTING( 0x00, DEF_STR( Off ) )
PORT_DIPSETTING( 0x08, DEF_STR( On ) )
PORT_DIPNAME( 0x10, 0x00, DEF_STR( Unknown ) )
PORT_DIPSETTING( 0x00, DEF_STR( Off ) )
PORT_DIPSETTING( 0x10, DEF_STR( On ) )
PORT_DIPNAME( 0x20, 0x00, DEF_STR( Unknown ) )
PORT_DIPSETTING( 0x00, DEF_STR( Off ) )
PORT_DIPSETTING( 0x20, DEF_STR( On ) )
PORT_DIPNAME( 0x40, 0x00, DEF_STR( Unknown ) )
PORT_DIPSETTING( 0x00, DEF_STR( Off ) )
PORT_DIPSETTING( 0x40, DEF_STR( On ) )
PORT_DIPNAME( 0x80, 0x00, DEF_STR( Unknown ) )
PORT_DIPSETTING( 0x00, DEF_STR( Off ) )
PORT_DIPSETTING( 0x80, DEF_STR( On ) )
PORT_START("IN1")
PORT_BIT( 0x01, IP_ACTIVE_HIGH, IPT_START1 )
PORT_BIT( 0x02, IP_ACTIVE_HIGH, IPT_BUTTON1 ) PORT_NAME("Left Button")
PORT_BIT( 0x04, IP_ACTIVE_HIGH, IPT_BUTTON2 ) PORT_NAME("Center Button")
PORT_BIT( 0x08, IP_ACTIVE_HIGH, IPT_BUTTON3 ) PORT_NAME("Right Button")
PORT_DIPNAME( 0x10, 0x00, "IN1" )
PORT_DIPSETTING( 0x00, DEF_STR( Off ) )
PORT_DIPSETTING( 0x10, DEF_STR( On ) )
PORT_DIPNAME( 0x20, 0x00, DEF_STR( Unknown ) )
PORT_DIPSETTING( 0x00, DEF_STR( Off ) )
PORT_DIPSETTING( 0x20, DEF_STR( On ) )
PORT_DIPNAME( 0x40, 0x00, DEF_STR( Unknown ) )
PORT_DIPSETTING( 0x00, DEF_STR( Off ) )
PORT_DIPSETTING( 0x40, DEF_STR( On ) )
PORT_DIPNAME( 0x80, 0x00, DEF_STR( Unknown ) )
PORT_DIPSETTING( 0x00, DEF_STR( Off ) )
PORT_DIPSETTING( 0x80, DEF_STR( On ) )
PORT_START("IN2")
PORT_BIT( 0x01, IP_ACTIVE_HIGH, IPT_GAMBLE_KEYIN ) // 10 Yen
PORT_SERVICE( 0x02, IP_ACTIVE_HIGH )
PORT_BIT( 0x04, IP_ACTIVE_HIGH, IPT_BUTTON4 ) PORT_NAME("Down Button")
PORT_BIT( 0x08, IP_ACTIVE_HIGH, IPT_SPECIAL ) PORT_CUSTOM_MEMBER(DEVICE_SELF, toaplan2_state, pwrkick_hopper_status_r, nullptr)
PORT_BIT( 0x10, IP_ACTIVE_HIGH, IPT_SERVICE3 ) PORT_NAME("Memory Reset")
PORT_DIPNAME( 0x20, 0x00, DEF_STR( Unknown ) )
PORT_DIPSETTING( 0x00, DEF_STR( Off ) )
PORT_DIPSETTING( 0x20, DEF_STR( On ) )
PORT_DIPNAME( 0x40, 0x00, DEF_STR( Unknown ) )
PORT_DIPSETTING( 0x00, DEF_STR( Off ) )
PORT_DIPSETTING( 0x40, DEF_STR( On ) )
PORT_DIPNAME( 0x80, 0x00, DEF_STR( Unknown ) )
PORT_DIPSETTING( 0x00, DEF_STR( Off ) )
PORT_DIPSETTING( 0x80, DEF_STR( On ) )
PORT_START("SYS")
PORT_DIPNAME( 0x01, 0x00, "SYS" )
PORT_DIPSETTING( 0x00, DEF_STR( Off ) )
PORT_DIPSETTING( 0x01, DEF_STR( On ) )
PORT_DIPNAME( 0x02, 0x00, DEF_STR( Unknown ) )
PORT_DIPSETTING( 0x00, DEF_STR( Off ) )
PORT_DIPSETTING( 0x02, DEF_STR( On ) )
PORT_BIT( 0x04, IP_ACTIVE_HIGH, IPT_COIN2 ) // 100 Yen
PORT_BIT( 0x08, IP_ACTIVE_HIGH, IPT_SERVICE1 ) PORT_NAME("Bookkeeping")
PORT_DIPNAME( 0x10, 0x00, DEF_STR( Unknown ) )
PORT_DIPSETTING( 0x00, DEF_STR( Off ) )
PORT_DIPSETTING( 0x10, DEF_STR( On ) )
PORT_DIPNAME( 0x20, 0x00, DEF_STR( Unknown ) )
PORT_DIPSETTING( 0x00, DEF_STR( Off ) )
PORT_DIPSETTING( 0x20, DEF_STR( On ) )
PORT_BIT( 0x40, IP_ACTIVE_HIGH, IPT_SERVICE4 ) PORT_NAME("Attendant Key")
PORT_BIT( 0x80, IP_ACTIVE_HIGH, IPT_COIN1 )
INPUT_PORTS_END
static INPUT_PORTS_START( othldrby )
PORT_INCLUDE( toaplan2_3b )
PORT_MODIFY("SYS")
PORT_BIT( 0x08, IP_ACTIVE_HIGH, IPT_COIN1 ) PORT_IMPULSE(1)
PORT_BIT( 0x10, IP_ACTIVE_HIGH, IPT_COIN2 ) PORT_IMPULSE(1)
PORT_MODIFY("DSWA")
PORT_DIPNAME( 0x01, 0x00, DEF_STR( Demo_Sounds ) )
PORT_DIPSETTING( 0x01, DEF_STR( Off ) )
PORT_DIPSETTING( 0x00, DEF_STR( On ) )
PORT_DIPNAME( 0x02, 0x00, DEF_STR( Flip_Screen ) )
PORT_DIPSETTING( 0x00, DEF_STR( Off ) )
PORT_DIPSETTING( 0x02, DEF_STR( On ) )
PORT_SERVICE( 0x04, IP_ACTIVE_HIGH )
PORT_DIPNAME( 0x08, 0x00, DEF_STR( Allow_Continue ) )
PORT_DIPSETTING( 0x08, DEF_STR( No ) )
PORT_DIPSETTING( 0x00, DEF_STR( Yes ) )
PORT_DIPNAME( 0x30, 0x00, DEF_STR( Coin_A ) )
PORT_DIPSETTING( 0x30, DEF_STR( 3C_1C ) )
PORT_DIPSETTING( 0x20, DEF_STR( 2C_1C ) )
PORT_DIPSETTING( 0x00, DEF_STR( 1C_1C ) )
PORT_DIPSETTING( 0x10, DEF_STR( 1C_2C ) )
PORT_DIPNAME( 0xc0, 0x00, DEF_STR( Coin_B ) )
PORT_DIPSETTING( 0xc0, DEF_STR( 3C_1C ) )
PORT_DIPSETTING( 0x80, DEF_STR( 2C_1C ) )
PORT_DIPSETTING( 0x00, DEF_STR( 1C_1C ) )
PORT_DIPSETTING( 0x40, DEF_STR( 1C_2C ) )
PORT_MODIFY("DSWB")
PORT_DIPNAME( 0x03, 0x00, DEF_STR( Difficulty ) )
PORT_DIPSETTING( 0x01, DEF_STR( Easy ) )
PORT_DIPSETTING( 0x00, DEF_STR( Normal ) )
PORT_DIPSETTING( 0x02, DEF_STR( Hard ) )
PORT_DIPSETTING( 0x03, DEF_STR( Very_Hard ) )
PORT_DIPNAME( 0x04, 0x00, DEF_STR( Unused ) )
PORT_DIPSETTING( 0x00, DEF_STR( Off ) )
PORT_DIPSETTING( 0x04, DEF_STR( On ) )
PORT_DIPNAME( 0x08, 0x00, DEF_STR( Unused ) )
PORT_DIPSETTING( 0x00, DEF_STR( Off ) )
PORT_DIPSETTING( 0x08, DEF_STR( On ) )
PORT_DIPNAME( 0x10, 0x00, DEF_STR( Unused ) )
PORT_DIPSETTING( 0x00, DEF_STR( Off ) )
PORT_DIPSETTING( 0x10, DEF_STR( On ) )
PORT_DIPNAME( 0x20, 0x00, DEF_STR( Unused ) )
PORT_DIPSETTING( 0x00, DEF_STR( Off ) )
PORT_DIPSETTING( 0x20, DEF_STR( On ) )
PORT_DIPNAME( 0x40, 0x00, DEF_STR( Unused ) )
PORT_DIPSETTING( 0x00, DEF_STR( Off ) )
PORT_DIPSETTING( 0x40, DEF_STR( On ) )
PORT_DIPNAME( 0x80, 0x00, DEF_STR( Unused ) )
PORT_DIPSETTING( 0x00, DEF_STR( Off ) )
PORT_DIPSETTING( 0x80, DEF_STR( On ) )
INPUT_PORTS_END
static INPUT_PORTS_START( snowbro2 )
PORT_INCLUDE( toaplan2_2b )
PORT_START("IN3")
PORT_BIT( 0x0001, IP_ACTIVE_HIGH, IPT_JOYSTICK_UP ) PORT_PLAYER(3) PORT_8WAY
PORT_BIT( 0x0002, IP_ACTIVE_HIGH, IPT_JOYSTICK_DOWN ) PORT_PLAYER(3) PORT_8WAY
PORT_BIT( 0x0004, IP_ACTIVE_HIGH, IPT_JOYSTICK_LEFT ) PORT_PLAYER(3) PORT_8WAY
PORT_BIT( 0x0008, IP_ACTIVE_HIGH, IPT_JOYSTICK_RIGHT ) PORT_PLAYER(3) PORT_8WAY
PORT_BIT( 0x0010, IP_ACTIVE_HIGH, IPT_BUTTON1 ) PORT_PLAYER(3)
PORT_BIT( 0x0020, IP_ACTIVE_HIGH, IPT_BUTTON2 ) PORT_PLAYER(3)
PORT_BIT( 0x0040, IP_ACTIVE_HIGH, IPT_START3 )
PORT_BIT( 0x0080, IP_ACTIVE_HIGH, IPT_UNKNOWN )
PORT_START("IN4")
PORT_BIT( 0x0001, IP_ACTIVE_HIGH, IPT_JOYSTICK_UP ) PORT_PLAYER(4) PORT_8WAY
PORT_BIT( 0x0002, IP_ACTIVE_HIGH, IPT_JOYSTICK_DOWN ) PORT_PLAYER(4) PORT_8WAY
PORT_BIT( 0x0004, IP_ACTIVE_HIGH, IPT_JOYSTICK_LEFT ) PORT_PLAYER(4) PORT_8WAY
PORT_BIT( 0x0008, IP_ACTIVE_HIGH, IPT_JOYSTICK_RIGHT ) PORT_PLAYER(4) PORT_8WAY
PORT_BIT( 0x0010, IP_ACTIVE_HIGH, IPT_BUTTON1 ) PORT_PLAYER(4)
PORT_BIT( 0x0020, IP_ACTIVE_HIGH, IPT_BUTTON2 ) PORT_PLAYER(4)
PORT_BIT( 0x0040, IP_ACTIVE_HIGH, IPT_START4 )
PORT_BIT( 0x0080, IP_ACTIVE_HIGH, IPT_UNKNOWN )
PORT_MODIFY("DSWA")
PORT_DIPNAME( 0x0001, 0x0000, DEF_STR( Continue_Price ) ) PORT_DIPLOCATION("SW1:!1")
PORT_DIPSETTING( 0x0000, DEF_STR( Normal ) )
PORT_DIPSETTING( 0x0001, "Discount" )
// Various features on bit mask 0x000e - see above
TOAPLAN_COINAGE_DUAL_LOC( JMPR, 0x1c00, 0x0800, SW1 )
PORT_MODIFY("DSWB")
// Difficulty on bit mask 0x0003 - see above
PORT_DIPNAME( 0x000c, 0x0000, DEF_STR( Bonus_Life ) ) PORT_DIPLOCATION("SW2:!3,!4")
PORT_DIPSETTING( 0x000c, DEF_STR( None ) )
PORT_DIPSETTING( 0x0008, "200k only" )
PORT_DIPSETTING( 0x0000, "100k only" )
PORT_DIPSETTING( 0x0004, "100k and every 500k" )
PORT_DIPNAME( 0x0030, 0x0000, DEF_STR( Lives ) ) PORT_DIPLOCATION("SW2:!5,!6")
PORT_DIPSETTING( 0x0030, "1" )
PORT_DIPSETTING( 0x0020, "2" )
PORT_DIPSETTING( 0x0000, "3" )
PORT_DIPSETTING( 0x0010, "4" )
PORT_DIPNAME( 0x0040, 0x0000, "Invulnerability (Cheat)" ) PORT_DIPLOCATION("SW2:!7")
PORT_DIPSETTING( 0x0000, DEF_STR( Off ) )
PORT_DIPSETTING( 0x0040, DEF_STR( On ) )
PORT_DIPNAME( 0x0080, 0x0000, "Maximum Players" ) PORT_DIPLOCATION("SW2:!8")
PORT_DIPSETTING( 0x0080, "2" )
PORT_DIPSETTING( 0x0000, "4" )
PORT_START("JMPR")
PORT_CONFNAME( 0x2000, 0x0000, "Show All Rights Reserved" ) //PORT_CONFLOCATION("JP:!1")
PORT_CONFSETTING( 0x0000, DEF_STR( No ) )
PORT_CONFSETTING( 0x2000, DEF_STR( Yes ) )
PORT_CONFNAME( 0x1c00, 0x0800, DEF_STR( Region ) ) //PORT_CONFLOCATION("JP:!4,!3,!2")
PORT_CONFSETTING( 0x0800, DEF_STR( Europe ) )
PORT_CONFSETTING( 0x0400, DEF_STR( USA ) )
PORT_CONFSETTING( 0x0000, DEF_STR( Japan ) )
PORT_CONFSETTING( 0x0c00, DEF_STR( Korea ) )
PORT_CONFSETTING( 0x1000, DEF_STR( Hong_Kong ) )
PORT_CONFSETTING( 0x1400, DEF_STR( Taiwan ) )
PORT_CONFSETTING( 0x1800, DEF_STR( Southeast_Asia ) )
// PORT_CONFSETTING( 0x1c00, DEF_STR( Unused ) )
PORT_BIT( 0xc3ff, IP_ACTIVE_HIGH, IPT_UNKNOWN )
INPUT_PORTS_END
static INPUT_PORTS_START( sstriker )
PORT_INCLUDE( toaplan2_3b )
PORT_MODIFY("DSWA")
PORT_DIPNAME( 0x0001, 0x0000, DEF_STR( Free_Play ) ) PORT_DIPLOCATION("SW1:!1")
PORT_DIPSETTING( 0x0000, DEF_STR( Off ) )
PORT_DIPSETTING( 0x0001, DEF_STR( On ) )
// Various features on bit mask 0x000e - see above
TOAPLAN_COINAGE_DUAL_LOC( JMPR, 0x0e, 0x04, SW1 )
PORT_MODIFY("DSWB")
// Difficulty on bit mask 0x0003 - see above
PORT_DIPNAME( 0x000c, 0x0000, DEF_STR( Bonus_Life ) ) PORT_DIPLOCATION("SW2:!3,!4")
PORT_DIPSETTING( 0x000c, DEF_STR( None ) )
PORT_DIPSETTING( 0x0008, "200k only" )
PORT_DIPSETTING( 0x0000, "Every 300k" )
PORT_DIPSETTING( 0x0004, "200k and 500k" )
PORT_DIPNAME( 0x0030, 0x0000, DEF_STR( Lives ) ) PORT_DIPLOCATION("SW2:!5,!6")
PORT_DIPSETTING( 0x0030, "1" )
PORT_DIPSETTING( 0x0020, "2" )
PORT_DIPSETTING( 0x0000, "3" )
PORT_DIPSETTING( 0x0010, "5" )
PORT_DIPNAME( 0x0040, 0x0000, "Invulnerability (Cheat)" ) PORT_DIPLOCATION("SW2:!7")
PORT_DIPSETTING( 0x0000, DEF_STR( Off ) )
PORT_DIPSETTING( 0x0040, DEF_STR( On ) )
PORT_DIPNAME( 0x0080, 0x0000, DEF_STR( Allow_Continue ) ) PORT_DIPLOCATION("SW2:!8")
PORT_DIPSETTING( 0x0080, DEF_STR( No ) )
PORT_DIPSETTING( 0x0000, DEF_STR( Yes ) )
PORT_START("JMPR")
PORT_CONFNAME( 0x0001, 0x0001, "FBI Logo" ) //PORT_CONFLOCATION("JP:!4")
PORT_CONFSETTING( 0x0001, DEF_STR( Off ) )
PORT_CONFSETTING( 0x0000, DEF_STR( On ) )
PORT_CONFNAME( 0x000e, 0x0004, DEF_STR( Region ) ) //PORT_CONFLOCATION("JP:!3,!2,!1")
PORT_CONFSETTING( 0x0004, DEF_STR( Europe ) )
PORT_CONFSETTING( 0x0002, DEF_STR( USA ) )
PORT_CONFSETTING( 0x0000, DEF_STR( Japan ) )
PORT_CONFSETTING( 0x0006, DEF_STR( Southeast_Asia ) )
PORT_CONFSETTING( 0x0008, DEF_STR( China ) )
PORT_CONFSETTING( 0x000a, DEF_STR( Korea ) )
PORT_CONFSETTING( 0x000c, DEF_STR( Hong_Kong ) )
PORT_CONFSETTING( 0x000e, DEF_STR( Taiwan ) )
INPUT_PORTS_END
static INPUT_PORTS_START( sstrikera )
PORT_INCLUDE( sstriker )
PORT_MODIFY("JMPR")
PORT_CONFNAME( 0x000e, 0x0004, DEF_STR( Region ) ) //PORT_CONFLOCATION("JP:!3,!2,!1")
PORT_CONFSETTING( 0x0004, DEF_STR( Europe ) )
PORT_CONFSETTING( 0x0002, DEF_STR( USA ) )
PORT_CONFSETTING( 0x0000, DEF_STR( Japan ) )
PORT_CONFSETTING( 0x0006, DEF_STR( Southeast_Asia ) )
PORT_CONFSETTING( 0x0008, DEF_STR( China ) )
PORT_CONFSETTING( 0x000a, "Korea (Unite Trading)" )
PORT_CONFSETTING( 0x000c, DEF_STR( Hong_Kong ) )
PORT_CONFSETTING( 0x000e, DEF_STR( Taiwan ) )
INPUT_PORTS_END
static INPUT_PORTS_START( mahoudai )
PORT_INCLUDE( sstriker )
PORT_MODIFY("JMPR")
// Effectively unused by this set - see notes
PORT_BIT( 0xffff, IP_ACTIVE_HIGH, IPT_UNKNOWN )
INPUT_PORTS_END
static INPUT_PORTS_START( kingdmgp )
PORT_INCLUDE( sstriker )
// The code and lookup tables pertaining to the jumpers are almost identical to sstriker.
// However, this set apparently lacks (reachable) code to display the FBI logo,
// even though the logo itself is present in the gfx ROMs.
PORT_MODIFY("JMPR")
PORT_CONFNAME( 0x0001, 0x0000, DEF_STR( Unused ) ) //PORT_CONFLOCATION("JP:!4")
PORT_CONFSETTING( 0x0000, DEF_STR( Off ) )
PORT_CONFSETTING( 0x0001, DEF_STR( On ) )
PORT_CONFNAME( 0x000e, 0x0004, DEF_STR( Region ) ) //PORT_CONFLOCATION("JP:!3,!2,!1")
PORT_CONFSETTING( 0x0004, DEF_STR( Europe ) )
PORT_CONFSETTING( 0x0002, DEF_STR( USA ) )
// PORT_CONFSETTING( 0x0000, DEF_STR( Japan ) ) // Corrupt title screen and text - use shippumd
PORT_CONFSETTING( 0x0006, DEF_STR( Southeast_Asia ) )
PORT_CONFSETTING( 0x0008, DEF_STR( China ) )
PORT_CONFSETTING( 0x000a, "Korea (Unite Trading license)" )
PORT_CONFSETTING( 0x000c, DEF_STR( Hong_Kong ) )
PORT_CONFSETTING( 0x000e, DEF_STR( Taiwan ) )
INPUT_PORTS_END
static INPUT_PORTS_START( shippumd )
PORT_INCLUDE( sstriker )
PORT_MODIFY("JMPR")
// Title screen and text are corrupt for anything but Japan
PORT_BIT( 0xffff, IP_ACTIVE_HIGH, IPT_UNKNOWN )
INPUT_PORTS_END
static INPUT_PORTS_START( bgaregga )
PORT_START("IN1")
PORT_BIT( 0x0001, IP_ACTIVE_HIGH, IPT_JOYSTICK_UP ) PORT_PLAYER(1) PORT_8WAY
PORT_BIT( 0x0002, IP_ACTIVE_HIGH, IPT_JOYSTICK_DOWN ) PORT_PLAYER(1) PORT_8WAY
PORT_BIT( 0x0004, IP_ACTIVE_HIGH, IPT_JOYSTICK_LEFT ) PORT_PLAYER(1) PORT_8WAY
PORT_BIT( 0x0008, IP_ACTIVE_HIGH, IPT_JOYSTICK_RIGHT ) PORT_PLAYER(1) PORT_8WAY
PORT_BIT( 0x0010, IP_ACTIVE_HIGH, IPT_BUTTON1 ) PORT_PLAYER(1)
PORT_BIT( 0x0020, IP_ACTIVE_HIGH, IPT_BUTTON2 ) PORT_PLAYER(1)
PORT_BIT( 0x0040, IP_ACTIVE_HIGH, IPT_BUTTON3 ) PORT_PLAYER(1)
PORT_BIT( 0x0080, IP_ACTIVE_HIGH, IPT_UNKNOWN )
PORT_BIT( 0xff00, IP_ACTIVE_HIGH, IPT_UNKNOWN ) // Unknown/Unused
PORT_START("IN2")
PORT_BIT( 0x0001, IP_ACTIVE_HIGH, IPT_JOYSTICK_UP ) PORT_PLAYER(2) PORT_8WAY
PORT_BIT( 0x0002, IP_ACTIVE_HIGH, IPT_JOYSTICK_DOWN ) PORT_PLAYER(2) PORT_8WAY
PORT_BIT( 0x0004, IP_ACTIVE_HIGH, IPT_JOYSTICK_LEFT ) PORT_PLAYER(2) PORT_8WAY
PORT_BIT( 0x0008, IP_ACTIVE_HIGH, IPT_JOYSTICK_RIGHT ) PORT_PLAYER(2) PORT_8WAY
PORT_BIT( 0x0010, IP_ACTIVE_HIGH, IPT_BUTTON1 ) PORT_PLAYER(2)
PORT_BIT( 0x0020, IP_ACTIVE_HIGH, IPT_BUTTON2 ) PORT_PLAYER(2)
PORT_BIT( 0x0040, IP_ACTIVE_HIGH, IPT_BUTTON3 ) PORT_PLAYER(2)
PORT_BIT( 0x0080, IP_ACTIVE_HIGH, IPT_UNKNOWN )
PORT_BIT( 0xff00, IP_ACTIVE_HIGH, IPT_UNKNOWN ) // Unknown/Unused
PORT_START("SYS")
PORT_BIT( 0x0001, IP_ACTIVE_HIGH, IPT_SERVICE1 )
PORT_BIT( 0x0002, IP_ACTIVE_HIGH, IPT_UNKNOWN )
TOAPLAN_TEST_SWITCH( 0x04, IP_ACTIVE_HIGH )
PORT_BIT( 0x0008, IP_ACTIVE_HIGH, IPT_COIN1 )
PORT_BIT( 0x0010, IP_ACTIVE_HIGH, IPT_COIN2 )
PORT_BIT( 0x0020, IP_ACTIVE_HIGH, IPT_START1 )
PORT_BIT( 0x0040, IP_ACTIVE_HIGH, IPT_START2 )
PORT_BIT( 0x0080, IP_ACTIVE_HIGH, IPT_UNKNOWN )
PORT_BIT( 0xff00, IP_ACTIVE_HIGH, IPT_UNKNOWN ) // Unknown/Unused
PORT_START("DSWA")
PORT_SERVICE_DIPLOC(0x0001, IP_ACTIVE_HIGH, "SW1:!1")
PORT_DIPNAME( 0x0002, 0x0000, "Credits to Start" ) PORT_DIPLOCATION("SW1:!2")
PORT_DIPSETTING( 0x0000, "1" )
PORT_DIPSETTING( 0x0002, "2" )
PORT_DIPNAME( 0x001c, 0x0000, DEF_STR( Coin_A ) ) PORT_DIPLOCATION("SW1:!3,!4,!5")
PORT_DIPSETTING( 0x0018, DEF_STR( 4C_1C ) )
PORT_DIPSETTING( 0x0014, DEF_STR( 3C_1C ) )
PORT_DIPSETTING( 0x0010, DEF_STR( 2C_1C ) )
PORT_DIPSETTING( 0x0000, DEF_STR( 1C_1C ) )
PORT_DIPSETTING( 0x0004, DEF_STR( 1C_2C ) )
PORT_DIPSETTING( 0x0008, DEF_STR( 1C_3C ) )
PORT_DIPSETTING( 0x000c, DEF_STR( 1C_4C ) )
PORT_DIPSETTING( 0x001c, DEF_STR( Free_Play ) )
PORT_DIPNAME( 0x00e0, 0x0000, DEF_STR( Coin_B ) ) PORT_CONDITION("DSWA", 0x001c, NOTEQUALS, 0x001c) PORT_DIPLOCATION("SW1:!6,!7,!8")
PORT_DIPSETTING( 0x00c0, DEF_STR( 4C_1C ) ) PORT_CONDITION("DSWA", 0x001c, NOTEQUALS, 0x001c)
PORT_DIPSETTING( 0x00a0, DEF_STR( 3C_1C ) ) PORT_CONDITION("DSWA", 0x001c, NOTEQUALS, 0x001c)
PORT_DIPSETTING( 0x0080, DEF_STR( 2C_1C ) ) PORT_CONDITION("DSWA", 0x001c, NOTEQUALS, 0x001c)
PORT_DIPSETTING( 0x0000, DEF_STR( 1C_1C ) ) PORT_CONDITION("DSWA", 0x001c, NOTEQUALS, 0x001c)
// PORT_DIPSETTING( 0x00e0, DEF_STR( 1C_1C ) ) PORT_CONDITION("DSWA", 0x001c, NOTEQUALS, 0x001c)
PORT_DIPSETTING( 0x0020, DEF_STR( 1C_2C ) ) PORT_CONDITION("DSWA", 0x001c, NOTEQUALS, 0x001c)
PORT_DIPSETTING( 0x0040, DEF_STR( 1C_3C ) ) PORT_CONDITION("DSWA", 0x001c, NOTEQUALS, 0x001c)
PORT_DIPSETTING( 0x0060, DEF_STR( 1C_4C ) ) PORT_CONDITION("DSWA", 0x001c, NOTEQUALS, 0x001c)
// When Coin_A is set to Free_Play, Coin_A becomes Coin_A and Coin_B, and the following dips occur
PORT_DIPNAME( 0x0020, 0x0000, "Joystick Mode" ) PORT_CONDITION("DSWA", 0x001c, EQUALS, 0x001c) PORT_DIPLOCATION("SW1:!6")
PORT_DIPSETTING( 0x0000, "90 degrees ACW" ) PORT_CONDITION("DSWA", 0x001c, EQUALS, 0x001c)
PORT_DIPSETTING( 0x0020, DEF_STR( Normal ) ) PORT_CONDITION("DSWA", 0x001c, EQUALS, 0x001c)
PORT_DIPNAME( 0x0040, 0x0000, "Effect" ) PORT_CONDITION("DSWA", 0x001c, EQUALS, 0x001c) PORT_DIPLOCATION("SW1:!7")
PORT_DIPSETTING( 0x0000, DEF_STR( Off ) ) PORT_CONDITION("DSWA", 0x001c, EQUALS, 0x001c)
PORT_DIPSETTING( 0x0040, DEF_STR( On ) ) PORT_CONDITION("DSWA", 0x001c, EQUALS, 0x001c)
PORT_DIPNAME( 0x0080, 0x0000, "Music" ) PORT_CONDITION("DSWA", 0x001c, EQUALS, 0x001c) PORT_DIPLOCATION("SW1:!8")
PORT_DIPSETTING( 0x0000, DEF_STR( Off ) ) PORT_CONDITION("DSWA", 0x001c, EQUALS, 0x001c)
PORT_DIPSETTING( 0x0080, DEF_STR( On ) ) PORT_CONDITION("DSWA", 0x001c, EQUALS, 0x001c)
PORT_START("DSWB")
PORT_DIPNAME( 0x0003, 0x0000, DEF_STR( Difficulty ) ) PORT_DIPLOCATION("SW2:!1,!2")
PORT_DIPSETTING( 0x0001, DEF_STR( Easy ) )
PORT_DIPSETTING( 0x0000, DEF_STR( Normal ) )
PORT_DIPSETTING( 0x0002, DEF_STR( Hard ) )
PORT_DIPSETTING( 0x0003, DEF_STR( Very_Hard ) )
PORT_DIPNAME( 0x0004, 0x0000, DEF_STR( Flip_Screen ) ) PORT_DIPLOCATION("SW2:!3")
PORT_DIPSETTING( 0x0000, DEF_STR( Off ) )
PORT_DIPSETTING( 0x0004, DEF_STR( On ) )
PORT_DIPNAME( 0x0008, 0x0000, DEF_STR( Demo_Sounds ) ) PORT_DIPLOCATION("SW2:!4")
PORT_DIPSETTING( 0x0008, DEF_STR( Off ) )
PORT_DIPSETTING( 0x0000, DEF_STR( On ) )
PORT_DIPNAME( 0x0070, 0x0000, DEF_STR( Lives ) ) PORT_DIPLOCATION("SW2:!5,!6,!7")
PORT_DIPSETTING( 0x0030, "1" )
PORT_DIPSETTING( 0x0020, "2" )
PORT_DIPSETTING( 0x0000, "3" )
PORT_DIPSETTING( 0x0010, "4" )
PORT_DIPSETTING( 0x0040, "5" )
PORT_DIPSETTING( 0x0050, "6" )
PORT_DIPSETTING( 0x0060, DEF_STR( Infinite ) )
PORT_DIPSETTING( 0x0070, "Invulnerability (Cheat)" )
PORT_DIPNAME( 0x0080, 0x0000, DEF_STR( Bonus_Life ) ) PORT_DIPLOCATION("SW2:!8")
PORT_DIPSETTING( 0x0000, DEF_STR( None ) ) PORT_CONDITION("JMPR",0x0003,NOTEQUALS,0x0000) // Non-Japan
PORT_DIPSETTING( 0x0080, "Every 2000k" ) PORT_CONDITION("JMPR",0x0003,NOTEQUALS,0x0000) // Non-Japan
PORT_DIPSETTING( 0x0080, "1000k and 2000k" ) PORT_CONDITION("JMPR",0x0003,EQUALS,0x0000) // Japan
PORT_DIPSETTING( 0x0000, "Every 1000k" ) PORT_CONDITION("JMPR",0x0003,EQUALS,0x0000) // Japan
PORT_START("JMPR") // DSW3 and jumper
PORT_DIPNAME( 0x0008, 0x0000, "Stage Edit" ) PORT_DIPLOCATION("SW3:!1")
PORT_DIPSETTING( 0x0000, DEF_STR( Off ) )
PORT_DIPSETTING( 0x0008, DEF_STR( On ) )
PORT_DIPNAME( 0x0004, 0x0000, DEF_STR( Allow_Continue ) ) PORT_DIPLOCATION("SW3:!2")
PORT_DIPSETTING( 0x0004, DEF_STR( No ) )
PORT_DIPSETTING( 0x0000, DEF_STR( Yes ) )
PORT_CONFNAME( 0x0003, 0x0001, DEF_STR( Region ) ) //PORT_CONFLOCATION("JP:!2,!1")
PORT_CONFSETTING( 0x0001, "Europe (Tuning)" )
PORT_CONFSETTING( 0x0002, "USA (Fabtek)" )
PORT_CONFSETTING( 0x0000, DEF_STR( Japan ) )
PORT_CONFSETTING( 0x0003, DEF_STR( Asia ) )
INPUT_PORTS_END
static INPUT_PORTS_START( bgareggahk )
PORT_INCLUDE( bgaregga )
PORT_MODIFY("JMPR")
PORT_CONFNAME( 0x0003, 0x0003, DEF_STR( Region ) ) //PORT_CONFLOCATION("JP:!2,!1")
PORT_CONFSETTING( 0x0001, "Austria (Tuning)" )
// These two settings end up reporting ROM-0 as BAD
// PORT_CONFSETTING( 0x0002, "USA (Fabtek)" )
// PORT_CONFSETTING( 0x0000, DEF_STR( Japan ) )
PORT_CONFSETTING( 0x0003, "Hong Kong (Metrotainment)" )
INPUT_PORTS_END
static INPUT_PORTS_START( bgareggatw )
PORT_INCLUDE( bgaregga )
PORT_MODIFY("JMPR")
PORT_CONFNAME( 0x0003, 0x0003, DEF_STR( Region ) ) //PORT_CONFLOCATION("JP:!2,!1")
PORT_CONFSETTING( 0x0001, "Germany (Tuning)" )
// These two settings end up reporting ROM-0 as BAD
// PORT_CONFSETTING( 0x0002, "USA (Fabtek)" )
// PORT_CONFSETTING( 0x0000, DEF_STR( Japan ) )
PORT_CONFSETTING( 0x0003, "Taiwan (Liang Hwa)" )
INPUT_PORTS_END
static INPUT_PORTS_START( bgareggacn )
PORT_INCLUDE( bgaregga )
PORT_MODIFY("JMPR")
PORT_CONFNAME( 0x0003, 0x0003, DEF_STR( Region ) ) //PORT_CONFLOCATION("JP:!2,!1")
PORT_CONFSETTING( 0x0001, "Denmark (Tuning)" )
// These two settings end up reporting ROM-0 as BAD
// PORT_CONFSETTING( 0x0002, "USA (Fabtek)" )
// PORT_CONFSETTING( 0x0000, DEF_STR( Japan ) )
PORT_CONFSETTING( 0x0003, DEF_STR( China ) )
INPUT_PORTS_END
static INPUT_PORTS_START( batrider )
PORT_START("IN") // Player Inputs
PORT_BIT( 0x0001, IP_ACTIVE_HIGH, IPT_JOYSTICK_UP ) PORT_8WAY PORT_PLAYER(1)
PORT_BIT( 0x0002, IP_ACTIVE_HIGH, IPT_JOYSTICK_DOWN ) PORT_8WAY PORT_PLAYER(1)
PORT_BIT( 0x0004, IP_ACTIVE_HIGH, IPT_JOYSTICK_LEFT ) PORT_8WAY PORT_PLAYER(1)
PORT_BIT( 0x0008, IP_ACTIVE_HIGH, IPT_JOYSTICK_RIGHT ) PORT_8WAY PORT_PLAYER(1)
PORT_BIT( 0x0010, IP_ACTIVE_HIGH, IPT_BUTTON1 ) PORT_PLAYER(1)
PORT_BIT( 0x0020, IP_ACTIVE_HIGH, IPT_BUTTON2 ) PORT_PLAYER(1)
PORT_BIT( 0x0040, IP_ACTIVE_HIGH, IPT_BUTTON3 ) PORT_PLAYER(1)
PORT_BIT( 0x0100, IP_ACTIVE_HIGH, IPT_JOYSTICK_UP ) PORT_8WAY PORT_PLAYER(2)
PORT_BIT( 0x0200, IP_ACTIVE_HIGH, IPT_JOYSTICK_DOWN ) PORT_8WAY PORT_PLAYER(2)
PORT_BIT( 0x0400, IP_ACTIVE_HIGH, IPT_JOYSTICK_LEFT ) PORT_8WAY PORT_PLAYER(2)
PORT_BIT( 0x0800, IP_ACTIVE_HIGH, IPT_JOYSTICK_RIGHT ) PORT_8WAY PORT_PLAYER(2)
PORT_BIT( 0x1000, IP_ACTIVE_HIGH, IPT_BUTTON1 ) PORT_PLAYER(2)
PORT_BIT( 0x2000, IP_ACTIVE_HIGH, IPT_BUTTON2 ) PORT_PLAYER(2)
PORT_BIT( 0x4000, IP_ACTIVE_HIGH, IPT_BUTTON3 ) PORT_PLAYER(2)
PORT_BIT( 0x8080, IP_ACTIVE_HIGH, IPT_UNKNOWN )
PORT_START("DSW") // DSWA and DSWB
PORT_SERVICE_DIPLOC(0x0001, IP_ACTIVE_HIGH, "SW1:!1")
PORT_DIPNAME( 0x0002, 0x0000, "Credits to Start" ) PORT_CONDITION("DSW", 0x001c, NOTEQUALS, 0x001c) PORT_DIPLOCATION("SW1:!2")
PORT_DIPSETTING( 0x0000, "1" ) PORT_CONDITION("DSW", 0x001c, NOTEQUALS, 0x001c)
PORT_DIPSETTING( 0x0002, "2" ) PORT_CONDITION("DSW", 0x001c, NOTEQUALS, 0x001c)
PORT_DIPNAME( 0x0002, 0x0000, "Joystick Mode" ) PORT_CONDITION("DSW", 0x001c, EQUALS, 0x001c) PORT_DIPLOCATION("SW1:!2")
PORT_DIPSETTING( 0x0000, DEF_STR( Normal ) ) PORT_CONDITION("DSW", 0x001c, EQUALS, 0x001c)
PORT_DIPSETTING( 0x0002, "90 degrees ACW" ) PORT_CONDITION("DSW", 0x001c, EQUALS, 0x001c)
PORT_DIPNAME( 0x001c, 0x0000, DEF_STR( Coin_A ) ) PORT_DIPLOCATION("SW1:!3,!4,!5")
PORT_DIPSETTING( 0x0018, DEF_STR( 4C_1C ) )
PORT_DIPSETTING( 0x0014, DEF_STR( 3C_1C ) )
PORT_DIPSETTING( 0x0010, DEF_STR( 2C_1C ) )
PORT_DIPSETTING( 0x0000, DEF_STR( 1C_1C ) )
PORT_DIPSETTING( 0x0004, DEF_STR( 1C_2C ) )
PORT_DIPSETTING( 0x0008, DEF_STR( 1C_3C ) )
PORT_DIPSETTING( 0x000c, DEF_STR( 1C_4C ) )
PORT_DIPSETTING( 0x001c, DEF_STR( Free_Play ) )
PORT_DIPNAME( 0x00e0, 0x0000, DEF_STR( Coin_B ) ) PORT_CONDITION("DSW", 0x001c, NOTEQUALS, 0x001c) PORT_DIPLOCATION("SW1:!6,!7,!8")
PORT_DIPSETTING( 0x00c0, DEF_STR( 4C_1C ) ) PORT_CONDITION("DSW", 0x001c, NOTEQUALS, 0x001c)
PORT_DIPSETTING( 0x00a0, DEF_STR( 3C_1C ) ) PORT_CONDITION("DSW", 0x001c, NOTEQUALS, 0x001c)
PORT_DIPSETTING( 0x0080, DEF_STR( 2C_1C ) ) PORT_CONDITION("DSW", 0x001c, NOTEQUALS, 0x001c)
PORT_DIPSETTING( 0x0000, DEF_STR( 1C_1C ) ) PORT_CONDITION("DSW", 0x001c, NOTEQUALS, 0x001c)
// PORT_DIPSETTING( 0x00e0, DEF_STR( 1C_1C ) ) PORT_CONDITION("DSW", 0x001c, NOTEQUALS, 0x001c)
PORT_DIPSETTING( 0x0020, DEF_STR( 1C_2C ) ) PORT_CONDITION("DSW", 0x001c, NOTEQUALS, 0x001c)
PORT_DIPSETTING( 0x0040, DEF_STR( 1C_3C ) ) PORT_CONDITION("DSW", 0x001c, NOTEQUALS, 0x001c)
PORT_DIPSETTING( 0x0060, DEF_STR( 1C_4C ) ) PORT_CONDITION("DSW", 0x001c, NOTEQUALS, 0x001c)
// When Coin_A is set to Free_Play, Coin_A becomes Coin_A and Coin_B, and the following dips occur
PORT_DIPNAME( 0x0020, 0x0000, "Hit Score" ) PORT_CONDITION("DSW", 0x001c, EQUALS, 0x001c) PORT_DIPLOCATION("SW1:!6")
PORT_DIPSETTING( 0x0000, DEF_STR( Off ) ) PORT_CONDITION("DSW", 0x001c, EQUALS, 0x001c)
PORT_DIPSETTING( 0x0020, DEF_STR( On ) ) PORT_CONDITION("DSW", 0x001c, EQUALS, 0x001c)
PORT_DIPNAME( 0x0040, 0x0000, "Sound Effect" ) PORT_CONDITION("DSW", 0x001c, EQUALS, 0x001c) PORT_DIPLOCATION("SW1:!7")
PORT_DIPSETTING( 0x0000, DEF_STR( Off ) ) PORT_CONDITION("DSW", 0x001c, EQUALS, 0x001c)
PORT_DIPSETTING( 0x0040, DEF_STR( On ) ) PORT_CONDITION("DSW", 0x001c, EQUALS, 0x001c)
PORT_DIPNAME( 0x0080, 0x0000, "Music" ) PORT_CONDITION("DSW", 0x001c, EQUALS, 0x001c) PORT_DIPLOCATION("SW1:!8")
PORT_DIPSETTING( 0x0000, DEF_STR( Off ) ) PORT_CONDITION("DSW", 0x001c, EQUALS, 0x001c)
PORT_DIPSETTING( 0x0080, DEF_STR( On ) ) PORT_CONDITION("DSW", 0x001c, EQUALS, 0x001c)
PORT_DIPNAME( 0x0300, 0x0000, DEF_STR( Difficulty ) ) PORT_DIPLOCATION("SW2:!1,!2")
PORT_DIPSETTING( 0x0100, DEF_STR( Easy ) )
PORT_DIPSETTING( 0x0000, DEF_STR( Normal ) )
PORT_DIPSETTING( 0x0200, DEF_STR( Hard ) )
PORT_DIPSETTING( 0x0300, DEF_STR( Very_Hard ) )
PORT_DIPNAME( 0x0c00, 0x0000, "Timer" ) PORT_DIPLOCATION("SW2:!3,!4")
PORT_DIPSETTING( 0x0c00, DEF_STR( Highest ) )
PORT_DIPSETTING( 0x0800, DEF_STR( High ) )
PORT_DIPSETTING( 0x0000, DEF_STR( Normal ) )
PORT_DIPSETTING( 0x0400, DEF_STR( Low ) )
PORT_DIPNAME( 0x3000, 0x0000, DEF_STR( Lives ) ) PORT_DIPLOCATION("SW2:!5,!6")
PORT_DIPSETTING( 0x3000, "1" )
PORT_DIPSETTING( 0x2000, "2" )
PORT_DIPSETTING( 0x0000, "3" )
PORT_DIPSETTING( 0x1000, "4" )
PORT_DIPNAME( 0xc000, 0x0000, DEF_STR( Bonus_Life ) ) PORT_DIPLOCATION("SW2:!7,!8")
PORT_DIPSETTING( 0xc000, DEF_STR( None ) )
PORT_DIPSETTING( 0x8000, "Every 2000k" )
PORT_DIPSETTING( 0x0000, "Every 1500k" )
PORT_DIPSETTING( 0x4000, "Every 1000k" )
PORT_START("SYS-DSW") // Coin/System and DSWC
PORT_BIT( 0x0001, IP_ACTIVE_HIGH, IPT_SERVICE1 )
PORT_BIT( 0x0002, IP_ACTIVE_HIGH, IPT_UNKNOWN)
TOAPLAN_TEST_SWITCH( 0x0004, IP_ACTIVE_HIGH )
PORT_BIT( 0x0008, IP_ACTIVE_HIGH, IPT_COIN1 )
PORT_BIT( 0x0010, IP_ACTIVE_HIGH, IPT_COIN2 )
PORT_BIT( 0x0020, IP_ACTIVE_HIGH, IPT_START1 )
PORT_BIT( 0x0040, IP_ACTIVE_HIGH, IPT_START2 )
PORT_BIT( 0x0080, IP_ACTIVE_HIGH, IPT_UNKNOWN )
PORT_DIPNAME( 0x0100, 0x0000, DEF_STR( Flip_Screen ) ) PORT_DIPLOCATION("SW3:!1")
PORT_DIPSETTING( 0x0000, DEF_STR( Off ) )
PORT_DIPSETTING( 0x0100, DEF_STR( On ) )
PORT_DIPNAME( 0x0200, 0x0000, DEF_STR( Demo_Sounds ) ) PORT_DIPLOCATION("SW3:!2")
PORT_DIPSETTING( 0x0200, DEF_STR( Off ) )
PORT_DIPSETTING( 0x0000, DEF_STR( On ) )
PORT_DIPNAME( 0x0400, 0x0000, "Stage Edit" ) PORT_DIPLOCATION("SW3:!3")
PORT_DIPSETTING( 0x0000, DEF_STR( Off ) )
PORT_DIPSETTING( 0x0400, DEF_STR( On ) )
PORT_DIPNAME( 0x0800, 0x0000, DEF_STR( Allow_Continue ) ) PORT_DIPLOCATION("SW3:!4")
PORT_DIPSETTING( 0x0800, DEF_STR( No ) )
PORT_DIPSETTING( 0x0000, DEF_STR( Yes ) )
PORT_DIPNAME( 0x1000, 0x0000, "Invulnerability (Cheat)" ) PORT_DIPLOCATION("SW3:!5")
PORT_DIPSETTING( 0x0000, DEF_STR( Off ) )
PORT_DIPSETTING( 0x1000, DEF_STR( On ) )
// These dips are shown only when Coin_A is set to Free_Play, but they work in normal play mode too
PORT_DIPNAME( 0x2000, 0x0000, "Guest Players" ) PORT_DIPLOCATION("SW3:!6")
PORT_DIPSETTING( 0x2000, DEF_STR( Off ) )
PORT_DIPSETTING( 0x0000, DEF_STR( On ) )
PORT_DIPNAME( 0x4000, 0x0000, "Player Select" ) PORT_DIPLOCATION("SW3:!7")
PORT_DIPSETTING( 0x4000, DEF_STR( Off ) )
PORT_DIPSETTING( 0x0000, DEF_STR( On ) )
PORT_DIPNAME( 0x8000, 0x0000, "Special Course" ) PORT_DIPLOCATION("SW3:!8")
PORT_DIPSETTING( 0x8000, DEF_STR( Off ) )
PORT_DIPSETTING( 0x0000, DEF_STR( On ) )
INPUT_PORTS_END
static INPUT_PORTS_START( batriderj )
PORT_INCLUDE( batrider )
PORT_MODIFY("SYS-DSW") // Coin/System and DSWC
// These dips are shown only when Coin_A is set to Free_Play, but they work in normal play mode too
PORT_DIPNAME( 0x2000, 0x0000, "Guest Players" ) PORT_DIPLOCATION("SW3:!6")
PORT_DIPSETTING( 0x0000, DEF_STR( Off ) )
PORT_DIPSETTING( 0x2000, DEF_STR( On ) )
PORT_DIPNAME( 0x4000, 0x0000, "Player Select" ) PORT_DIPLOCATION("SW3:!7")
PORT_DIPSETTING( 0x0000, DEF_STR( Off ) )
PORT_DIPSETTING( 0x4000, DEF_STR( On ) )
PORT_DIPNAME( 0x8000, 0x0000, "Special Course" ) PORT_DIPLOCATION("SW3:!8")
PORT_DIPSETTING( 0x0000, DEF_STR( Off ) )
PORT_DIPSETTING( 0x8000, DEF_STR( On ) )
INPUT_PORTS_END
static INPUT_PORTS_START( bbakraid )
PORT_INCLUDE( batrider )
PORT_MODIFY("DSW") // DSWA and DSWB
PORT_DIPNAME( 0xc000, 0x0000, DEF_STR( Bonus_Life ) ) PORT_DIPLOCATION("SW2:!7,!8")
PORT_DIPSETTING( 0xc000, DEF_STR( None ) )
PORT_DIPSETTING( 0x8000, "Every 4000k" )
PORT_DIPSETTING( 0x4000, "Every 3000k" )
PORT_DIPSETTING( 0x0000, "Every 2000k" )
PORT_MODIFY("SYS-DSW") // Coin/System and DSW-3
PORT_DIPNAME( 0x2000, 0x0000, "Save Scores" ) PORT_DIPLOCATION("SW3:!6")
PORT_DIPSETTING( 0x2000, DEF_STR( Off ) )
PORT_DIPSETTING( 0x0000, DEF_STR( On ) )
PORT_DIPNAME( 0x4000, 0x0000, DEF_STR( Unused ) ) PORT_DIPLOCATION("SW3:!7")
PORT_DIPSETTING( 0x0000, DEF_STR( Off ) )
PORT_DIPSETTING( 0x4000, DEF_STR( On ) )
PORT_DIPNAME( 0x8000, 0x0000, DEF_STR( Unused ) ) PORT_DIPLOCATION("SW3:!8")
PORT_DIPSETTING( 0x0000, DEF_STR( Off ) )
PORT_DIPSETTING( 0x8000, DEF_STR( On ) )
PORT_START( "EEPROMOUT" )
PORT_BIT( 0x0001, IP_ACTIVE_HIGH, IPT_OUTPUT ) PORT_WRITE_LINE_DEVICE_MEMBER("eeprom", eeprom_serial_93cxx_device, cs_write)
PORT_BIT( 0x0004, IP_ACTIVE_HIGH, IPT_OUTPUT ) PORT_WRITE_LINE_DEVICE_MEMBER("eeprom", eeprom_serial_93cxx_device, di_write)
PORT_BIT( 0x0008, IP_ACTIVE_HIGH, IPT_OUTPUT ) PORT_WRITE_LINE_DEVICE_MEMBER("eeprom", eeprom_serial_93cxx_device, clk_write)
INPUT_PORTS_END
// Text layer graphics -- ROM based in some games, RAM based in others
// See video/gp9001.c for the main graphics layouts
static const gfx_layout raizing_textlayout =
{
8,8, /* 8x8 characters */
1024, /* 1024 characters */
4, /* 4 bits per pixel */
{ 0, 1, 2, 3 },
{ 0, 4, 8, 12, 16, 20, 24, 28 },
{ 0*32, 1*32, 2*32, 3*32, 4*32, 5*32, 6*32, 7*32 },
8*32
};
#define XOR(a) WORD_XOR_LE(a)
#define LOC(x) (x+XOR(0))
static const gfx_layout truxton2_tx_tilelayout =
{
8,8, /* 8x8 characters */
1024, /* 1024 characters */
4, /* 4 bits per pixel */
{ 0, 1, 2, 3 },
{ LOC(0)*4, LOC(1)*4, LOC(4)*4, LOC(5)*4, LOC(8)*4, LOC(9)*4, LOC(12)*4, LOC(13)*4 },
{ 0*64, 1*64, 2*64, 3*64, 4*64, 5*64, 6*64, 7*64 },
8*64
};
static const gfx_layout batrider_tx_tilelayout =
{
8,8, /* 8x8 characters */
1024, /* 1024 characters */
4, /* 4 bits per pixel */
{ 0, 1, 2, 3 },
{ XOR(0)*4, XOR(1)*4, XOR(2)*4, XOR(3)*4, XOR(4)*4, XOR(5)*4, XOR(6)*4, XOR(7)*4 },
{ 0*32, 1*32, 2*32, 3*32, 4*32, 5*32, 6*32, 7*32 },
8*32
};
static const gfx_layout fixeightblayout =
{
8,8,
RGN_FRAC(1,1),
4,
{ 0,1,2,3 },
{ 0*4, 1*4, 2*4, 3*4, 4*4, 5*4, 6*4, 7*4},
{ 0*4*8, 1*4*8, 2*4*8, 3*4*8, 4*4*8, 5*4*8, 6*4*8, 7*4*8},
8*8*4
};
static GFXDECODE_START( truxton2 )
GFXDECODE_ENTRY( nullptr, 0, truxton2_tx_tilelayout, 64*16, 64 )
GFXDECODE_END
static GFXDECODE_START( raizing )
GFXDECODE_ENTRY( "text", 0, raizing_textlayout, 64*16, 64 )
GFXDECODE_END
static GFXDECODE_START( batrider )
GFXDECODE_ENTRY( nullptr, 0, batrider_tx_tilelayout, 64*16, 64 )
GFXDECODE_END
static GFXDECODE_START( fixeightbl )
GFXDECODE_ENTRY( "text", 0, fixeightblayout, 64*16, 64 )
GFXDECODE_END
static MACHINE_CONFIG_START( tekipaki, toaplan2_state )
/* basic machine hardware */
MCFG_CPU_ADD("maincpu", M68000, XTAL_10MHz) /* 10MHz Oscillator */
MCFG_CPU_PROGRAM_MAP(tekipaki_68k_mem)
MCFG_CPU_VBLANK_INT_DRIVER("screen", toaplan2_state, toaplan2_vblank_irq4)
#ifdef USE_HD64x180
MCFG_CPU_ADD("audiocpu", Z180, XTAL_10MHz) /* HD647180 CPU actually */
MCFG_CPU_PROGRAM_MAP(hd647180_mem)
#endif
MCFG_MACHINE_START_OVERRIDE(toaplan2_state,toaplan2)
MCFG_MACHINE_RESET_OVERRIDE(toaplan2_state,toaplan2)
/* video hardware */
MCFG_SCREEN_ADD("screen", RASTER)
MCFG_SCREEN_VIDEO_ATTRIBUTES(VIDEO_UPDATE_BEFORE_VBLANK)
MCFG_SCREEN_RAW_PARAMS(XTAL_27MHz/4,432,0,320,262,0,240)
//MCFG_SCREEN_REFRESH_RATE(60)
//MCFG_SCREEN_SIZE(432, 262)
//MCFG_SCREEN_VISIBLE_AREA(0, 319, 0, 239)
MCFG_SCREEN_UPDATE_DRIVER(toaplan2_state, screen_update_toaplan2)
MCFG_SCREEN_VBLANK_DRIVER(toaplan2_state, screen_eof_toaplan2)
MCFG_SCREEN_PALETTE("palette")
MCFG_PALETTE_ADD("palette", T2PALETTE_LENGTH)
MCFG_PALETTE_FORMAT(xBBBBBGGGGGRRRRR)
MCFG_DEVICE_ADD("gp9001", GP9001_VDP, 0)
MCFG_GFX_PALETTE("palette")
MCFG_VIDEO_START_OVERRIDE(toaplan2_state,toaplan2)
/* sound hardware */
MCFG_SPEAKER_STANDARD_MONO("mono")
MCFG_SOUND_ADD("ymsnd", YM3812, XTAL_27MHz/8)
#ifdef USE_HD64x180
MCFG_YM3812_IRQ_HANDLER(INPUTLINE("audiocpu", 0))
#endif
MCFG_SOUND_ROUTE(ALL_OUTPUTS, "mono", 1.0)
MACHINE_CONFIG_END
static MACHINE_CONFIG_START( ghox, toaplan2_state )
/* basic machine hardware */
MCFG_CPU_ADD("maincpu", M68000, XTAL_10MHz) /* verified on pcb */
MCFG_CPU_PROGRAM_MAP(ghox_68k_mem)
MCFG_CPU_VBLANK_INT_DRIVER("screen", toaplan2_state, toaplan2_vblank_irq4)
#ifdef USE_HD64x180
MCFG_CPU_ADD("audiocpu", Z180, XTAL_10MHz) /* HD647180 CPU actually */
MCFG_CPU_PROGRAM_MAP(hd647180_mem)
#endif
MCFG_MACHINE_START_OVERRIDE(toaplan2_state,toaplan2)
MCFG_MACHINE_RESET_OVERRIDE(toaplan2_state,ghox)
/* video hardware */
MCFG_SCREEN_ADD("screen", RASTER)
MCFG_SCREEN_VIDEO_ATTRIBUTES(VIDEO_UPDATE_BEFORE_VBLANK)
MCFG_SCREEN_RAW_PARAMS(XTAL_27MHz/4,432,0,320,262,0,240)
//MCFG_SCREEN_REFRESH_RATE(60)
//MCFG_SCREEN_SIZE(432, 262)
//MCFG_SCREEN_VISIBLE_AREA(0, 319, 0, 239)
MCFG_SCREEN_UPDATE_DRIVER(toaplan2_state, screen_update_toaplan2)
MCFG_SCREEN_VBLANK_DRIVER(toaplan2_state, screen_eof_toaplan2)
MCFG_SCREEN_PALETTE("palette")
MCFG_PALETTE_ADD("palette", T2PALETTE_LENGTH)
MCFG_PALETTE_FORMAT(xBBBBBGGGGGRRRRR)
MCFG_DEVICE_ADD("gp9001", GP9001_VDP, 0)
MCFG_GFX_PALETTE("palette")
MCFG_VIDEO_START_OVERRIDE(toaplan2_state,toaplan2)
/* sound hardware */
MCFG_SPEAKER_STANDARD_MONO("mono")
MCFG_YM2151_ADD("ymsnd", XTAL_27MHz/8) /* verified on pcb */
MCFG_SOUND_ROUTE(ALL_OUTPUTS, "mono", 1.0)
MACHINE_CONFIG_END
/* probably dogyuun, vfive and kbash use the same decryption table;
those 3 games have been seen with the NITRO905 chip, other alias are
ts002mach for dogyuun, ts004dash for kbash and ts007spy for vfive */
static const UINT8 nitro_decryption_table[256] = {
0x1b,0x56,0x75,0x88,0x8c,0x06,0x58,0x72, 0x83,0x86,0x36,0x1a,0x5f,0xd3,0x8c,0xe9, /* 00 */
/* *//* *//* *//* *//* *//* *//* *//* */ /* *//* *//* *//* *//* *//* *//* *//* */
0x22,0x0f,0x03,0x2a,0xeb,0x2a,0xf9,0x0f, 0xa4,0xbd,0x75,0xf3,0x4f,0x53,0x8e,0xfe, /* 10 */
/*W*//*W*//*r*//*W*//*r*//*W*//*W*//*r*/ /*r*//*a*//*r*//*r*//*r*//*W*//*x*//*r*/
0x87,0xe8,0xb1,0x8d,0x36,0xb5,0x43,0x73, 0x2a,0x5b,0xf9,0x02,0x24,0x8a,0x03,0x80, /* 20 */
/*a*//*r*//*r*//*r*//*x*//*r*//*r*//*r*/ /*W*//*r*//*W*//*W*//*a*//*r*//*a*//*r*/
0x86,0x8b,0xd1,0x3e,0x8d,0x3e,0x58,0xfb, 0xc3,0x79,0xbd,0xb7,0x8a,0xe8,0x0f,0x81, /* 30 */
/*a*//*a*//*a*//*a*//*r*//*r*//*a*//*r*/ /*r*//*a*//*a*//*W*//*r*//*r*//*r*//*r*/
0xb7,0xd0,0x8b,0xeb,0xff,0xb8,0x90,0x8b, 0x5e,0xa2,0x90,0x90,0xab,0xb4,0x80,0x59, /* 40 */
/*r*//*r*//*a*//*r*//*a*//*x*/ /*a*/ /*W*//*W*/ /*r*//*W*//*r*//*a*/
0x87,0x72,0xb5,0xbd,0xb0,0x88,0x50,0x0f, 0xfe,0xd2,0xc3,0x90,0x8a,0x90,0xf9,0x75, /* 50 */
/*W*//*a*//*a*//*r*//*r*//*a*//*a*//*a*/ /*r*//*W*//*r*/ /*r*/ /*W*//*r*/
0x1a,0xb3,0x74,0x0a,0x68,0x24,0xbb,0x90, 0x75,0x47,0xfe,0x2c,0xbe,0xc3,0x88,0xd2, /* 60 */
/*W*//*r*//*a*//*r*//*a*//*a*//*W*/ /*r*//*a*//*r*//*W*//*W*//*a*//*r*//*a*/
0x3e,0xc1,0x8c,0x33,0x0f,0x90,0x8b,0x90, 0xb9,0x1e,0xff,0xa2,0x3e,0x22,0xbe,0x57, /* 70 */
/*r*//*W*//*r*//*r*//*a*/ /*a*/ /*r*//*r*//*a*//*r*//*a*//*W*//*r*//*a*/
0x81,0x3a,0xf6,0x88,0xeb,0xb1,0x89,0x8a, 0x32,0x80,0x0f,0xb1,0x48,0xc3,0x68,0x72, /* 80 */
/*r*//*r*//*r*//*r*//*a*//*W*//*a*//*r*/ /*r*//*r*//*r*//*a*//*x*//*a*//*a*//*r*/
0x53,0x02,0xc0,0x02,0xe8,0xb4,0x74,0xbc, 0x90,0x58,0x0a,0xf3,0x75,0xc6,0x90,0xe8, /* 90 */
/*a*//*W*//*r*//*W*//*r*//*r*//*r*//*x*/ /*a*//*r*//*r*//*r*//*x*/ /*r*/
0x26,0x50,0xfc,0x8c,0x90,0xb1,0xc3,0xd1, 0xeb,0x83,0xa4,0xbf,0x26,0x4b,0x46,0xfe, /* a0 */
/*r*//*a*//*a*//*r*/ /*a*//*r*//*W*/ /*a*//*r*//*r*//*r*//*r*//*W*//*a*//*r*/
0xe2,0x89,0xb3,0x88,0x03,0x56,0x0f,0x38, 0xbb,0x0c,0x90,0x0f,0x07,0x8a,0x8a,0x33, /* b0 */
/*r*//*a*//*W*//*r*//*a*//*W*//*r*//*W*/ /*W*//*W*/ /*a*//*r*//*r*//*r*//*x*/
0xfe,0xf9,0xb1,0xa0,0x45,0x36,0x22,0x5e, 0x8a,0xbe,0xc6,0xea,0x3c,0xb2,0x1e,0xe8, /* c0 */
/*r*//*W*//*r*//*r*//*r*//*r*//*W*//*r*/ /*r*//*W*//*x*//*x*//*r*//*?*//*r*//*r*/
0x90,0xeb,0x55,0xf6,0x8a,0xb0,0x5d,0xc0, 0xbb,0x8d,0xf6,0xd0,0xd1,0x88,0x4d,0x90, /* d0 */
/*a*//*r*//*r*//*a*//*a*//*r*//*W*/ /*x*//*r*//*r*//*a*//*W*//*r*//*W*/
0x51,0x51,0x74,0xbd,0x32,0xd1,0x90,0xd2, 0x53,0xc7,0xab,0x36,0x50,0xe9,0x33,0xb3, /* e0 */
/*r*//*a*//*r*//*r*//*r*//*W*/ /*a*/ /*r*//*x*//*r*//*r*//*W*//*a*//*r*//*W*/
0x2e,0x05,0x88,0x59,0x74,0x74,0x22,0x8e, 0x8a,0x8a,0x36,0x08,0x0f,0x45,0x90,0x2e, /* f0 */
/*r*//*W*//*r*//*r*//*a*//*a*//*W*//*x*/ /*r*//*r*//*x*//*a*//*r*//*a*/ /*r*/
};
/*
dogyuun
a5272 cd
kbash
vfive
a4849 cd
*/
static MACHINE_CONFIG_START( dogyuun, toaplan2_state )
/* basic machine hardware */
MCFG_CPU_ADD("maincpu", M68000, XTAL_25MHz/2) /* verified on pcb */
MCFG_CPU_PROGRAM_MAP(dogyuun_68k_mem)
MCFG_CPU_VBLANK_INT_DRIVER("screen", toaplan2_state, toaplan2_vblank_irq4)
MCFG_CPU_ADD("audiocpu", V25, XTAL_25MHz/2) /* NEC V25 type Toaplan marked CPU ??? */
MCFG_CPU_PROGRAM_MAP(v25_mem)
MCFG_V25_CONFIG(nitro_decryption_table)
MCFG_V25_PORT_PT_READ_CB(IOPORT("DSWB")) MCFG_DEVCB_XOR(0xff)
MCFG_V25_PORT_P0_READ_CB(IOPORT("DSWA")) MCFG_DEVCB_XOR(0xff)
MCFG_V25_PORT_P1_READ_CB(IOPORT("JMPR")) MCFG_DEVCB_XOR(0xff)
MCFG_V25_PORT_P2_WRITE_CB(NOOP) // bit 0 is FAULT according to kbash schematic
MCFG_MACHINE_START_OVERRIDE(toaplan2_state,toaplan2)
/* video hardware */
MCFG_SCREEN_ADD("screen", RASTER)
MCFG_SCREEN_VIDEO_ATTRIBUTES(VIDEO_UPDATE_BEFORE_VBLANK)
MCFG_SCREEN_RAW_PARAMS(XTAL_27MHz/4,432,0,320,262,0,240)
MCFG_SCREEN_UPDATE_DRIVER(toaplan2_state, screen_update_dogyuun)
MCFG_SCREEN_VBLANK_DRIVER(toaplan2_state, screen_eof_toaplan2)
MCFG_SCREEN_PALETTE("palette")
MCFG_PALETTE_ADD("palette", T2PALETTE_LENGTH)
MCFG_PALETTE_FORMAT(xBBBBBGGGGGRRRRR)
MCFG_DEVICE_ADD("gp9001", GP9001_VDP, 0)
MCFG_GFX_PALETTE("palette")
MCFG_DEVICE_ADD("gp9001_1", GP9001_VDP, 0)
MCFG_GFX_PALETTE("palette")
MCFG_VIDEO_START_OVERRIDE(toaplan2_state,toaplan2)
/* sound hardware */
MCFG_SPEAKER_STANDARD_MONO("mono")
MCFG_YM2151_ADD("ymsnd", XTAL_27MHz/8) /* verified on pcb */
MCFG_SOUND_ROUTE(ALL_OUTPUTS, "mono", 0.5)
MCFG_OKIM6295_ADD("oki", XTAL_25MHz/24, OKIM6295_PIN7_HIGH) /* verified on pcb */
MCFG_SOUND_ROUTE(ALL_OUTPUTS, "mono", 0.5)
MACHINE_CONFIG_END
static MACHINE_CONFIG_START( kbash, toaplan2_state )
/* basic machine hardware */
MCFG_CPU_ADD("maincpu", M68000, XTAL_16MHz) /* 16MHz Oscillator */
MCFG_CPU_PROGRAM_MAP(kbash_68k_mem)
MCFG_CPU_VBLANK_INT_DRIVER("screen", toaplan2_state, toaplan2_vblank_irq4)
/* ROM based v25 */
MCFG_CPU_ADD("audiocpu", V25, XTAL_16MHz) /* NEC V25 type Toaplan marked CPU ??? */
MCFG_CPU_PROGRAM_MAP(kbash_v25_mem)
MCFG_V25_CONFIG(nitro_decryption_table)
MCFG_V25_PORT_PT_READ_CB(IOPORT("DSWA")) MCFG_DEVCB_XOR(0xff)
MCFG_V25_PORT_P0_READ_CB(IOPORT("DSWB")) MCFG_DEVCB_XOR(0xff)
MCFG_V25_PORT_P1_READ_CB(IOPORT("JMPR")) MCFG_DEVCB_XOR(0xff)
MCFG_V25_PORT_P2_WRITE_CB(NOOP) // bit 0 is FAULT according to kbash schematic
MCFG_MACHINE_START_OVERRIDE(toaplan2_state,toaplan2)
/* video hardware */
MCFG_SCREEN_ADD("screen", RASTER)
MCFG_SCREEN_VIDEO_ATTRIBUTES(VIDEO_UPDATE_BEFORE_VBLANK)
MCFG_SCREEN_RAW_PARAMS(XTAL_27MHz/4,432,0,320,262,0,240)
//MCFG_SCREEN_REFRESH_RATE(60)
//MCFG_SCREEN_SIZE(432, 262)
//MCFG_SCREEN_VISIBLE_AREA(0, 319, 0, 239)
MCFG_SCREEN_UPDATE_DRIVER(toaplan2_state, screen_update_toaplan2)
MCFG_SCREEN_VBLANK_DRIVER(toaplan2_state, screen_eof_toaplan2)
MCFG_SCREEN_PALETTE("palette")
MCFG_PALETTE_ADD("palette", T2PALETTE_LENGTH)
MCFG_PALETTE_FORMAT(xBBBBBGGGGGRRRRR)
MCFG_DEVICE_ADD("gp9001", GP9001_VDP, 0)
MCFG_GFX_PALETTE("palette")
MCFG_VIDEO_START_OVERRIDE(toaplan2_state,toaplan2)
/* sound hardware */
MCFG_SPEAKER_STANDARD_MONO("mono")
MCFG_YM2151_ADD("ymsnd", XTAL_27MHz/8)
MCFG_SOUND_ROUTE(ALL_OUTPUTS, "mono", 0.5)
MCFG_OKIM6295_ADD("oki", XTAL_32MHz/32, OKIM6295_PIN7_HIGH)
MCFG_SOUND_ROUTE(ALL_OUTPUTS, "mono", 0.5)
MACHINE_CONFIG_END
static MACHINE_CONFIG_START( kbash2, toaplan2_state )
/* basic machine hardware */
MCFG_CPU_ADD("maincpu", M68000, XTAL_16MHz) /* 16MHz Oscillator */
MCFG_CPU_PROGRAM_MAP(kbash2_68k_mem)
MCFG_CPU_VBLANK_INT_DRIVER("screen", toaplan2_state, toaplan2_vblank_irq4)
MCFG_MACHINE_START_OVERRIDE(toaplan2_state,toaplan2)
/* video hardware */
MCFG_SCREEN_ADD("screen", RASTER)
MCFG_SCREEN_VIDEO_ATTRIBUTES(VIDEO_UPDATE_BEFORE_VBLANK)
MCFG_SCREEN_RAW_PARAMS(XTAL_27MHz/4,432,0,320,262,0,240)
//MCFG_SCREEN_REFRESH_RATE(60)
//MCFG_SCREEN_SIZE(432, 262)
//MCFG_SCREEN_VISIBLE_AREA(0, 319, 0, 239)
MCFG_SCREEN_UPDATE_DRIVER(toaplan2_state, screen_update_toaplan2)
MCFG_SCREEN_VBLANK_DRIVER(toaplan2_state, screen_eof_toaplan2)
MCFG_SCREEN_PALETTE("palette")
MCFG_PALETTE_ADD("palette", T2PALETTE_LENGTH)
MCFG_PALETTE_FORMAT(xBBBBBGGGGGRRRRR)
MCFG_DEVICE_ADD("gp9001", GP9001_VDP, 0)
MCFG_GFX_PALETTE("palette")
MCFG_VIDEO_START_OVERRIDE(toaplan2_state,toaplan2)
/* sound hardware */
MCFG_SPEAKER_STANDARD_MONO("mono")
MCFG_OKIM6295_ADD("oki1", XTAL_16MHz/16, OKIM6295_PIN7_HIGH)
MCFG_SOUND_ROUTE(ALL_OUTPUTS, "mono", 1.0)
MCFG_OKIM6295_ADD("oki2", XTAL_16MHz/16, OKIM6295_PIN7_HIGH)
MCFG_SOUND_ROUTE(ALL_OUTPUTS, "mono", 1.0)
MACHINE_CONFIG_END
static MACHINE_CONFIG_START( truxton2, toaplan2_state )
/* basic machine hardware */
MCFG_CPU_ADD("maincpu", M68000, XTAL_16MHz) /* verified on pcb */
MCFG_CPU_PROGRAM_MAP(truxton2_68k_mem)
MCFG_CPU_VBLANK_INT_DRIVER("screen", toaplan2_state, toaplan2_vblank_irq2)
MCFG_MACHINE_START_OVERRIDE(toaplan2_state,toaplan2)
/* video hardware */
MCFG_SCREEN_ADD("screen", RASTER)
MCFG_SCREEN_VIDEO_ATTRIBUTES(VIDEO_UPDATE_BEFORE_VBLANK)
MCFG_SCREEN_RAW_PARAMS(XTAL_27MHz/4,432,0,320,262,0,240)
MCFG_SCREEN_UPDATE_DRIVER(toaplan2_state, screen_update_truxton2)
MCFG_SCREEN_VBLANK_DRIVER(toaplan2_state, screen_eof_toaplan2)
MCFG_SCREEN_PALETTE("palette")
MCFG_GFXDECODE_ADD("gfxdecode", "palette", truxton2)
MCFG_PALETTE_ADD("palette", T2PALETTE_LENGTH)
MCFG_PALETTE_FORMAT(xBBBBBGGGGGRRRRR)
MCFG_DEVICE_ADD("gp9001", GP9001_VDP, 0)
MCFG_GFX_PALETTE("palette")
MCFG_VIDEO_START_OVERRIDE(toaplan2_state,truxton2)
/* sound hardware */
#ifdef TRUXTON2_STEREO // music data is stereo...
MCFG_SPEAKER_STANDARD_STEREO("lspeaker", "rspeaker")
MCFG_YM2151_ADD("ymsnd", XTAL_27MHz/8)
MCFG_SOUND_ROUTE(0, "lspeaker", 1.0)
MCFG_SOUND_ROUTE(1, "rspeaker", 1.0)
MCFG_OKIM6295_ADD("oki", XTAL_16MHz/4, OKIM6295_PIN7_LOW)
MCFG_SOUND_ROUTE(ALL_OUTPUTS, "lspeaker", 1.0)
MCFG_SOUND_ROUTE(ALL_OUTPUTS, "rspeaker", 1.0)
#else // ...but the hardware is mono
MCFG_SPEAKER_STANDARD_MONO("mono")
MCFG_YM2151_ADD("ymsnd", XTAL_27MHz/8) /* verified on pcb */
MCFG_SOUND_ROUTE(ALL_OUTPUTS, "mono", 1.0)
MCFG_OKIM6295_ADD("oki", XTAL_16MHz/4, OKIM6295_PIN7_LOW) /* verified on pcb */
MCFG_SOUND_ROUTE(ALL_OUTPUTS, "mono", 1.0)
#endif
MACHINE_CONFIG_END
static MACHINE_CONFIG_START( pipibibs, toaplan2_state )
/* basic machine hardware */
MCFG_CPU_ADD("maincpu", M68000, XTAL_10MHz) /* verified on pcb */
MCFG_CPU_PROGRAM_MAP(pipibibs_68k_mem)
MCFG_CPU_VBLANK_INT_DRIVER("screen", toaplan2_state, toaplan2_vblank_irq4)
MCFG_CPU_ADD("audiocpu", Z80, XTAL_27MHz/8) /* verified on pcb */
MCFG_CPU_PROGRAM_MAP(pipibibs_sound_z80_mem)
MCFG_QUANTUM_TIME(attotime::from_hz(600))
MCFG_MACHINE_START_OVERRIDE(toaplan2_state,toaplan2)
MCFG_MACHINE_RESET_OVERRIDE(toaplan2_state,toaplan2)
/* video hardware */
MCFG_SCREEN_ADD("screen", RASTER)
MCFG_SCREEN_VIDEO_ATTRIBUTES(VIDEO_UPDATE_BEFORE_VBLANK)
MCFG_SCREEN_RAW_PARAMS(XTAL_27MHz/4,432,0,320,262,0,240)
//MCFG_SCREEN_REFRESH_RATE(60)
//MCFG_SCREEN_SIZE(432, 262)
//MCFG_SCREEN_VISIBLE_AREA(0, 319, 0, 239)
MCFG_SCREEN_UPDATE_DRIVER(toaplan2_state, screen_update_toaplan2)
MCFG_SCREEN_VBLANK_DRIVER(toaplan2_state, screen_eof_toaplan2)
MCFG_SCREEN_PALETTE("palette")
MCFG_PALETTE_ADD("palette", T2PALETTE_LENGTH)
MCFG_PALETTE_FORMAT(xBBBBBGGGGGRRRRR)
MCFG_DEVICE_ADD("gp9001", GP9001_VDP, 0)
MCFG_GFX_PALETTE("palette")
MCFG_VIDEO_START_OVERRIDE(toaplan2_state,toaplan2)
/* sound hardware */
MCFG_SPEAKER_STANDARD_MONO("mono")
MCFG_SOUND_ADD("ymsnd", YM3812, XTAL_27MHz/8) /* verified on pcb */
MCFG_YM3812_IRQ_HANDLER(INPUTLINE("audiocpu", 0))
MCFG_SOUND_ROUTE(ALL_OUTPUTS, "mono", 1.0)
MACHINE_CONFIG_END
static MACHINE_CONFIG_START( pipibibsbl, toaplan2_state )
/* basic machine hardware */
MCFG_CPU_ADD("maincpu", M68000, XTAL_10MHz) /* 10MHz Oscillator */
MCFG_CPU_PROGRAM_MAP(pipibibi_bootleg_68k_mem)
MCFG_CPU_VBLANK_INT_DRIVER("screen", toaplan2_state, toaplan2_vblank_irq4)
MCFG_CPU_ADD("audiocpu", Z80, XTAL_27MHz/8) /* ??? 3.37MHz */
MCFG_CPU_PROGRAM_MAP(pipibibs_sound_z80_mem)
MCFG_QUANTUM_TIME(attotime::from_hz(600))
MCFG_MACHINE_START_OVERRIDE(toaplan2_state,toaplan2)
MCFG_MACHINE_RESET_OVERRIDE(toaplan2_state,toaplan2)
/* video hardware */
MCFG_SCREEN_ADD("screen", RASTER)
MCFG_SCREEN_VIDEO_ATTRIBUTES(VIDEO_UPDATE_BEFORE_VBLANK)
MCFG_SCREEN_RAW_PARAMS(XTAL_27MHz/4,432,0,320,262,0,240)
//MCFG_SCREEN_REFRESH_RATE(60)
//MCFG_SCREEN_SIZE(432, 262)
//MCFG_SCREEN_VISIBLE_AREA(0, 319, 0, 239)
MCFG_SCREEN_UPDATE_DRIVER(toaplan2_state, screen_update_toaplan2)
MCFG_SCREEN_VBLANK_DRIVER(toaplan2_state, screen_eof_toaplan2)
MCFG_SCREEN_PALETTE("palette")
MCFG_PALETTE_ADD("palette", T2PALETTE_LENGTH)
MCFG_PALETTE_FORMAT(xBBBBBGGGGGRRRRR)
MCFG_DEVICE_ADD("gp9001", GP9001_VDP, 0)
MCFG_GFX_PALETTE("palette")
MCFG_VIDEO_START_OVERRIDE(toaplan2_state,toaplan2)
/* sound hardware */
MCFG_SPEAKER_STANDARD_MONO("mono")
MCFG_SOUND_ADD("ymsnd", YM3812, XTAL_27MHz/8)
MCFG_YM3812_IRQ_HANDLER(INPUTLINE("audiocpu", 0))
MCFG_SOUND_ROUTE(ALL_OUTPUTS, "mono", 1.0)
MACHINE_CONFIG_END
/* x = modified to match batsugun 'unencrypted' code - '?' likewise, but not so sure about them */
/* this one seems more different to the other tables */
static const UINT8 ts001turbo_decryption_table[256] = {
0x90,0x05,0x57,0x5f,0xfe,0x4f,0xbd,0x36, 0x80,0x8b,0x8a,0x0a,0x89,0x90,0x47,0x80, /* 00 */
/*r*//*r*//*r*//*r*//*r*//*r*//*r*/ /*r*//*r*//*r*//*r*//*r*/ /*r*//*r*/
0x22,0x90,0x90,0x5d,0x81,0x3c,0xb5,0x83, 0x68,0xff,0x75,0x75,0x8d,0x5b,0x8a,0x38, /* 10 */
/*r*/ /*r*//*r*//*r*//*r*//*r*/ /*r*//*r*//*r*//*r*//*r*//*r*//*r*//*r*/
0x8b,0xeb,0xd2,0x0a,0xb4,0xc7,0x46,0xd1, 0x0a,0x53,0xbd,0x90,0x22,0xff,0x1f,0x03, /* 20 */
/*a*//*r*//*r*//*r*//*r*//*r*//*r*//*r*/ /*r*//*r*//*r*/ /*r*//*r*//*?*//*r*/
0xfb,0x45,0xc3,0x02,0x90,0x0f,0x90,0x02, 0x0f,0xb7,0x90,0x24,0xc6,0xeb,0x1b,0x32, /* 30 */
/*r*//*r*//*r*//*r*/ /*r*/ /*r*/ /*r*//*r*/ /*r*//*r*//*r*//*r*//*r*/
0x8d,0xb9,0xfe,0x08,0x88,0x90,0x8a,0x8a, 0x75,0x8a,0xbd,0x58,0xfe,0x51,0x1e,0x8b, /* 40 */
/*r*//*r*//*r*//*r*//*r*/ /*r*//*r*/ /*r*//*r*//*r*//*r*//*r*//*r*//*r*//*r*/
0x0f,0x22,0xf6,0x90,0xc3,0x36,0x03,0x8d, 0xbb,0x16,0xbc,0x90,0x0f,0x5e,0xf9,0x2e, /* 50 */
/*r*//*r*//*r*/ /*r*//*r*//*r*//*r*/ /*r*//*?*//*r*/ /*r*//*r*//*r*//*r*/
0x90,0x90,0x59,0x90,0xbb,0x1a,0x0c,0x8d, 0x89,0x72,0x83,0xa4,0xc3,0xb3,0x8b,0xe9, /* 60 */
/*r*/ /*r*//*r*//*r*//*r*/ /*a*//*r*//*r*//*r*//*r*//*r*//*r*//*r*/
0x81,0x43,0xa0,0x2c,0x0f,0x55,0xf3,0x36, 0xb0,0x59,0xe8,0x03,0x26,0xe9,0x22,0xb0, /* 70 */
/*r*//*r*//*r*//*r*//*r*//*r*//*r*//*r*/ /*r*//*r*//*r*//*r*//*r*//*r*//*r*//*r*/
0x90,0x8e,0x24,0x8a,0xd0,0x3e,0xc3,0x3a, 0x90,0x79,0x57,0x16,0x88,0x86,0x24,0x74, /* 80 */
/*r*//*r*//*r*//*r*//*r*//*r*//*r*/ /*a*//*r*//*r*//*r*//*r*//*r*//*r*/
0x33,0xc3,0x53,0xb8,0xab,0x75,0x90,0x90, 0x8e,0xb1,0xe9,0x5d,0xf9,0x02,0x3c,0x90, /* 90 */
/*x*//*r*//*r*//*r*//*r*//*r*/ /*r*//*r*//*r*//*r*//*r*//*r*//*r*/
0x80,0xd3,0x89,0xe8,0x90,0x90,0x2a,0x74, 0x90,0x5f,0xf6,0x88,0x4f,0x56,0x8c,0x03, /* a0 */
/*r*//*a*//*r*//*r*/ /*r*//*r*/ /*r*//*r*//*r*//*r*//*r*//*r*//*r*/
0x47,0x90,0x88,0x90,0x03,0xfe,0x90,0xfc, 0x2a,0x90,0x33,0x07,0xb1,0x50,0x0f,0x3e, /* b0 */
/*r*/ /*r*/ /*r*//*r*/ /*r*/ /*r*/ /*r*//*r*//*r*//*r*//*r*//*r*/
0xbd,0x4d,0xf3,0xbf,0x59,0xd2,0xea,0xc6, 0x2a,0x74,0x72,0xe2,0x3e,0x2e,0x90,0x2e, /* c0 */
/*r*//*r*//*r*//*r*//*r*//*a*//*x*//*r*/ /*r*//*r*//*r*//*r*//*r*//*r*/ /*r*/
0x2e,0x73,0x88,0x72,0x45,0x5d,0xc1,0xb9, 0x32,0x38,0x88,0xc1,0xa0,0x06,0x45,0x90, /* d0 */
/*r*//*r*//*r*//*r*//*r*//*r*//*r*//*r*/ /*r*//*r*//*r*//*r*//*a*//*r*//*r*/
0x90,0x86,0x4b,0x87,0x90,0x8a,0x3b,0xab, 0x33,0xbe,0x90,0x32,0xbd,0xc7,0xb2,0x80, /* e0 */
/*r*//*r*//*r*/ /*r*//*?*//*r*/ /*r*//*r*/ /*r*//*r*//*r*//*?*//*r*/
0x0f,0x75,0xc0,0xb9,0x07,0x74,0x3e,0xa2, 0x8a,0x48,0x3e,0x8d,0xeb,0x90,0xfe,0x90, /* f0 */
/*r*//*r*//*r*//*r*//*r*//*r*//*r*//*r*/ /*r*//*x*//*r*//*r*//*r*/ /*r*/
};
static MACHINE_CONFIG_START( fixeight, toaplan2_state )
/* basic machine hardware */
MCFG_CPU_ADD("maincpu", M68000, XTAL_16MHz) /* verified on pcb */
MCFG_CPU_PROGRAM_MAP(fixeight_68k_mem)
MCFG_CPU_VBLANK_INT_DRIVER("screen", toaplan2_state, toaplan2_vblank_irq4)
MCFG_CPU_ADD("audiocpu", V25, XTAL_16MHz) /* NEC V25 type Toaplan marked CPU ??? */
MCFG_CPU_PROGRAM_MAP(fixeight_v25_mem)
MCFG_V25_CONFIG(ts001turbo_decryption_table)
MCFG_V25_PORT_P0_READ_CB(IOPORT("EEPROM"))
MCFG_V25_PORT_P0_WRITE_CB(IOPORT("EEPROM"))
MCFG_MACHINE_START_OVERRIDE(toaplan2_state,toaplan2)
MCFG_EEPROM_SERIAL_93C46_ADD("eeprom")
/* video hardware */
MCFG_SCREEN_ADD("screen", RASTER)
MCFG_SCREEN_VIDEO_ATTRIBUTES(VIDEO_UPDATE_BEFORE_VBLANK)
MCFG_SCREEN_RAW_PARAMS(XTAL_27MHz/4,432,0,320,262,0,240) /* verified on pcb */
MCFG_SCREEN_UPDATE_DRIVER(toaplan2_state, screen_update_truxton2)
MCFG_SCREEN_VBLANK_DRIVER(toaplan2_state, screen_eof_toaplan2)
MCFG_SCREEN_PALETTE("palette")
MCFG_GFXDECODE_ADD("gfxdecode", "palette", truxton2)
MCFG_PALETTE_ADD("palette", T2PALETTE_LENGTH)
MCFG_PALETTE_FORMAT(xBBBBBGGGGGRRRRR)
MCFG_DEVICE_ADD("gp9001", GP9001_VDP, 0)
MCFG_GFX_PALETTE("palette")
MCFG_VIDEO_START_OVERRIDE(toaplan2_state,truxton2)
/* sound hardware */
MCFG_SPEAKER_STANDARD_MONO("mono")
MCFG_YM2151_ADD("ymsnd", XTAL_27MHz/8) /* verified on pcb */
MCFG_SOUND_ROUTE(ALL_OUTPUTS, "mono", 0.5)
MCFG_OKIM6295_ADD("oki", XTAL_16MHz/16, OKIM6295_PIN7_HIGH) /* verified on pcb */
MCFG_SOUND_ROUTE(ALL_OUTPUTS, "mono", 0.5)
MACHINE_CONFIG_END
static MACHINE_CONFIG_START( fixeightbl, toaplan2_state )
/* basic machine hardware */
MCFG_CPU_ADD("maincpu", M68000, XTAL_10MHz) /* 10MHz Oscillator */
MCFG_CPU_PROGRAM_MAP(fixeightbl_68k_mem)
MCFG_CPU_VBLANK_INT_DRIVER("screen", toaplan2_state, toaplan2_vblank_irq2)
MCFG_MACHINE_START_OVERRIDE(toaplan2_state,toaplan2)
/* video hardware */
MCFG_SCREEN_ADD("screen", RASTER)
MCFG_SCREEN_VIDEO_ATTRIBUTES(VIDEO_UPDATE_BEFORE_VBLANK)
MCFG_SCREEN_RAW_PARAMS(XTAL_27MHz/4,432,0,320,262,0,240)
//MCFG_SCREEN_REFRESH_RATE(60)
//MCFG_SCREEN_SIZE(432, 262)
//MCFG_SCREEN_VISIBLE_AREA(0, 319, 0, 239)
MCFG_SCREEN_UPDATE_DRIVER(toaplan2_state, screen_update_bootleg)
MCFG_SCREEN_VBLANK_DRIVER(toaplan2_state, screen_eof_toaplan2)
MCFG_SCREEN_PALETTE("palette")
MCFG_GFXDECODE_ADD("gfxdecode", "palette", fixeightbl)
MCFG_PALETTE_ADD("palette", T2PALETTE_LENGTH)
MCFG_PALETTE_FORMAT(xBBBBBGGGGGRRRRR)
MCFG_DEVICE_ADD("gp9001", GP9001_VDP, 0)
MCFG_GFX_PALETTE("palette")
MCFG_VIDEO_START_OVERRIDE(toaplan2_state,fixeightbl)
/* sound hardware */
MCFG_SPEAKER_STANDARD_MONO("mono")
MCFG_OKIM6295_ADD("oki", XTAL_14MHz/16, OKIM6295_PIN7_LOW)
MCFG_SOUND_ROUTE(ALL_OUTPUTS, "mono", 1.0)
MCFG_DEVICE_ADDRESS_MAP(AS_0, fixeightbl_oki)
MACHINE_CONFIG_END
static MACHINE_CONFIG_START( vfive, toaplan2_state )
/* basic machine hardware */
MCFG_CPU_ADD("maincpu", M68000, XTAL_20MHz/2) /* verified on pcb */
MCFG_CPU_PROGRAM_MAP(vfive_68k_mem)
MCFG_CPU_VBLANK_INT_DRIVER("screen", toaplan2_state, toaplan2_vblank_irq4)
MCFG_CPU_ADD("audiocpu", V25, XTAL_20MHz/2) /* Verified on pcb, NEC V25 type Toaplan mark scratched out */
MCFG_CPU_PROGRAM_MAP(vfive_v25_mem)
MCFG_V25_CONFIG(nitro_decryption_table)
MCFG_V25_PORT_PT_READ_CB(IOPORT("DSWA")) MCFG_DEVCB_XOR(0xff)
MCFG_V25_PORT_P0_READ_CB(IOPORT("DSWB")) MCFG_DEVCB_XOR(0xff)
MCFG_V25_PORT_P1_READ_CB(IOPORT("JMPR")) MCFG_DEVCB_XOR(0xff)
MCFG_V25_PORT_P2_WRITE_CB(NOOP) // bit 0 is FAULT according to kbash schematic
MCFG_MACHINE_START_OVERRIDE(toaplan2_state,toaplan2)
/* video hardware */
MCFG_SCREEN_ADD("screen", RASTER)
MCFG_SCREEN_VIDEO_ATTRIBUTES(VIDEO_UPDATE_BEFORE_VBLANK)
MCFG_SCREEN_RAW_PARAMS(XTAL_27MHz/4,432,0,320,262,0,240) /* verified on pcb */
MCFG_SCREEN_UPDATE_DRIVER(toaplan2_state, screen_update_toaplan2)
MCFG_SCREEN_VBLANK_DRIVER(toaplan2_state, screen_eof_toaplan2)
MCFG_SCREEN_PALETTE("palette")
MCFG_PALETTE_ADD("palette", T2PALETTE_LENGTH)
MCFG_PALETTE_FORMAT(xBBBBBGGGGGRRRRR)
MCFG_DEVICE_ADD("gp9001", GP9001_VDP, 0)
MCFG_GFX_PALETTE("palette")
MCFG_VIDEO_START_OVERRIDE(toaplan2_state,toaplan2)
/* sound hardware */
MCFG_SPEAKER_STANDARD_MONO("mono")
MCFG_YM2151_ADD("ymsnd", XTAL_27MHz/8) /* verified on pcb */
MCFG_SOUND_ROUTE(ALL_OUTPUTS, "mono", 1.0)
MACHINE_CONFIG_END
static MACHINE_CONFIG_START( batsugun, toaplan2_state )
/* basic machine hardware */
MCFG_CPU_ADD("maincpu", M68000, XTAL_32MHz/2) /* 16MHz , 32MHz Oscillator */
MCFG_CPU_PROGRAM_MAP(batsugun_68k_mem)
MCFG_CPU_VBLANK_INT_DRIVER("screen", toaplan2_state, toaplan2_vblank_irq4)
MCFG_CPU_ADD("audiocpu", V25, XTAL_32MHz/2) /* NEC V25 type Toaplan marked CPU ??? */
MCFG_CPU_PROGRAM_MAP(v25_mem)
MCFG_V25_PORT_PT_READ_CB(IOPORT("DSWA")) MCFG_DEVCB_XOR(0xff)
MCFG_V25_PORT_P0_READ_CB(IOPORT("DSWB")) MCFG_DEVCB_XOR(0xff)
MCFG_V25_PORT_P1_READ_CB(IOPORT("JMPR")) MCFG_DEVCB_XOR(0xff)
MCFG_V25_PORT_P2_WRITE_CB(NOOP) // bit 0 is FAULT according to kbash schematic
MCFG_MACHINE_START_OVERRIDE(toaplan2_state,toaplan2)
/* video hardware */
MCFG_SCREEN_ADD("screen", RASTER)
MCFG_SCREEN_VIDEO_ATTRIBUTES(VIDEO_UPDATE_BEFORE_VBLANK)
MCFG_SCREEN_RAW_PARAMS(XTAL_27MHz/4,432,0,320,262,0,240)
//MCFG_SCREEN_REFRESH_RATE(60)
//MCFG_SCREEN_SIZE(432, 262)
//MCFG_SCREEN_VISIBLE_AREA(0, 319, 0, 239)
MCFG_SCREEN_UPDATE_DRIVER(toaplan2_state, screen_update_batsugun)
MCFG_SCREEN_VBLANK_DRIVER(toaplan2_state, screen_eof_toaplan2)
MCFG_SCREEN_PALETTE("palette")
MCFG_PALETTE_ADD("palette", T2PALETTE_LENGTH)
MCFG_PALETTE_FORMAT(xBBBBBGGGGGRRRRR)
MCFG_DEVICE_ADD("gp9001", GP9001_VDP, 0)
MCFG_GFX_PALETTE("palette")
MCFG_DEVICE_ADD("gp9001_1", GP9001_VDP, 0)
MCFG_GFX_PALETTE("palette")
MCFG_VIDEO_START_OVERRIDE(toaplan2_state,toaplan2)
/* sound hardware */
MCFG_SPEAKER_STANDARD_MONO("mono")
MCFG_YM2151_ADD("ymsnd", XTAL_27MHz/8)
MCFG_SOUND_ROUTE(ALL_OUTPUTS, "mono", 0.5)
MCFG_OKIM6295_ADD("oki", XTAL_32MHz/8, OKIM6295_PIN7_LOW)
MCFG_SOUND_ROUTE(ALL_OUTPUTS, "mono", 0.5)
MACHINE_CONFIG_END
static MACHINE_CONFIG_START( pwrkick, toaplan2_state )
/* basic machine hardware */
MCFG_CPU_ADD("maincpu", M68000, XTAL_16MHz)
MCFG_CPU_PROGRAM_MAP(pwrkick_68k_mem)
MCFG_CPU_VBLANK_INT_DRIVER("screen", toaplan2_state, toaplan2_vblank_irq4)
MCFG_MACHINE_START_OVERRIDE(toaplan2_state,toaplan2)
MCFG_UPD4992_ADD("rtc")
/* video hardware */
MCFG_SCREEN_ADD("screen", RASTER)
MCFG_SCREEN_VIDEO_ATTRIBUTES(VIDEO_UPDATE_BEFORE_VBLANK)
MCFG_SCREEN_RAW_PARAMS(XTAL_27MHz/4,432,0,320,262,0,240)
MCFG_SCREEN_UPDATE_DRIVER(toaplan2_state, screen_update_toaplan2)
MCFG_SCREEN_VBLANK_DRIVER(toaplan2_state, screen_eof_toaplan2)
MCFG_SCREEN_PALETTE("palette")
MCFG_PALETTE_ADD("palette", T2PALETTE_LENGTH)
MCFG_PALETTE_FORMAT(xBBBBBGGGGGRRRRR)
MCFG_DEVICE_ADD("gp9001", GP9001_VDP, 0)
MCFG_GFX_PALETTE("palette")
MCFG_VIDEO_START_OVERRIDE(toaplan2_state,toaplan2)
/* sound hardware */
MCFG_SPEAKER_STANDARD_MONO("mono")
/* empty YM2151 socket*/
MCFG_OKIM6295_ADD("oki", XTAL_27MHz/8, OKIM6295_PIN7_HIGH) // not confirmed
MCFG_SOUND_ROUTE(ALL_OUTPUTS, "mono", 0.5)
MACHINE_CONFIG_END
static MACHINE_CONFIG_START( othldrby, toaplan2_state )
/* basic machine hardware */
MCFG_CPU_ADD("maincpu", M68000, XTAL_16MHz)
MCFG_CPU_PROGRAM_MAP(othldrby_68k_mem)
MCFG_CPU_VBLANK_INT_DRIVER("screen", toaplan2_state, toaplan2_vblank_irq4)
MCFG_MACHINE_START_OVERRIDE(toaplan2_state,toaplan2)
MCFG_UPD4992_ADD("rtc")
/* video hardware */
MCFG_SCREEN_ADD("screen", RASTER)
MCFG_SCREEN_VIDEO_ATTRIBUTES(VIDEO_UPDATE_BEFORE_VBLANK)
MCFG_SCREEN_RAW_PARAMS(XTAL_27MHz/4,432,0,320,262,0,240)
MCFG_SCREEN_UPDATE_DRIVER(toaplan2_state, screen_update_toaplan2)
MCFG_SCREEN_VBLANK_DRIVER(toaplan2_state, screen_eof_toaplan2)
MCFG_SCREEN_PALETTE("palette")
MCFG_PALETTE_ADD("palette", T2PALETTE_LENGTH)
MCFG_PALETTE_FORMAT(xBBBBBGGGGGRRRRR)
MCFG_DEVICE_ADD("gp9001", GP9001_VDP, 0)
MCFG_GFX_PALETTE("palette")
MCFG_VIDEO_START_OVERRIDE(toaplan2_state,toaplan2)
/* sound hardware */
MCFG_SPEAKER_STANDARD_MONO("mono")
MCFG_OKIM6295_ADD("oki", XTAL_27MHz/8, OKIM6295_PIN7_HIGH) // not confirmed
MCFG_SOUND_ROUTE(ALL_OUTPUTS, "mono", 0.5)
MACHINE_CONFIG_END
static MACHINE_CONFIG_START( snowbro2, toaplan2_state )
/* basic machine hardware */
MCFG_CPU_ADD("maincpu", M68000, XTAL_16MHz)
MCFG_CPU_PROGRAM_MAP(snowbro2_68k_mem)
MCFG_CPU_VBLANK_INT_DRIVER("screen", toaplan2_state, toaplan2_vblank_irq4)
MCFG_MACHINE_START_OVERRIDE(toaplan2_state,toaplan2)
/* video hardware */
MCFG_SCREEN_ADD("screen", RASTER)
MCFG_SCREEN_VIDEO_ATTRIBUTES(VIDEO_UPDATE_BEFORE_VBLANK)
MCFG_SCREEN_RAW_PARAMS(XTAL_27MHz/4,432,0,320,262,0,240)
//MCFG_SCREEN_REFRESH_RATE(60)
//MCFG_SCREEN_SIZE(432, 262)
//MCFG_SCREEN_VISIBLE_AREA(0, 319, 0, 239)
MCFG_SCREEN_UPDATE_DRIVER(toaplan2_state, screen_update_toaplan2)
MCFG_SCREEN_VBLANK_DRIVER(toaplan2_state, screen_eof_toaplan2)
MCFG_SCREEN_PALETTE("palette")
MCFG_PALETTE_ADD("palette", T2PALETTE_LENGTH)
MCFG_PALETTE_FORMAT(xBBBBBGGGGGRRRRR)
MCFG_DEVICE_ADD("gp9001", GP9001_VDP, 0)
MCFG_GFX_PALETTE("palette")
MCFG_VIDEO_START_OVERRIDE(toaplan2_state,toaplan2)
/* sound hardware */
MCFG_SPEAKER_STANDARD_MONO("mono")
MCFG_YM2151_ADD("ymsnd", XTAL_27MHz/8)
MCFG_SOUND_ROUTE(ALL_OUTPUTS, "mono", 1.0)
MCFG_OKIM6295_ADD("oki", XTAL_27MHz/10, OKIM6295_PIN7_HIGH)
MCFG_SOUND_ROUTE(ALL_OUTPUTS, "mono", 1.0)
MACHINE_CONFIG_END
static MACHINE_CONFIG_START( mahoudai, toaplan2_state )
/* basic machine hardware */
MCFG_CPU_ADD("maincpu", M68000, XTAL_32MHz/2) /* 16MHz , 32MHz Oscillator */
MCFG_CPU_PROGRAM_MAP(mahoudai_68k_mem)
MCFG_CPU_VBLANK_INT_DRIVER("screen", toaplan2_state, toaplan2_vblank_irq4)
MCFG_CPU_ADD("audiocpu", Z80, XTAL_32MHz/8) /* 4MHz , 32MHz Oscillator */
MCFG_CPU_PROGRAM_MAP(raizing_sound_z80_mem)
MCFG_QUANTUM_TIME(attotime::from_hz(600))
MCFG_MACHINE_START_OVERRIDE(toaplan2_state,toaplan2)
MCFG_MACHINE_RESET_OVERRIDE(toaplan2_state,toaplan2)
/* video hardware */
MCFG_SCREEN_ADD("screen", RASTER)
MCFG_SCREEN_VIDEO_ATTRIBUTES(VIDEO_UPDATE_BEFORE_VBLANK)
MCFG_SCREEN_RAW_PARAMS(XTAL_27MHz/4,432,0,320,262,0,240)
//MCFG_SCREEN_REFRESH_RATE(60)
//MCFG_SCREEN_SIZE(432, 262)
//MCFG_SCREEN_VISIBLE_AREA(0, 319, 0, 239)
MCFG_SCREEN_UPDATE_DRIVER(toaplan2_state, screen_update_truxton2)
MCFG_SCREEN_VBLANK_DRIVER(toaplan2_state, screen_eof_toaplan2)
MCFG_SCREEN_PALETTE("palette")
MCFG_GFXDECODE_ADD("gfxdecode", "palette", raizing)
MCFG_PALETTE_ADD("palette", T2PALETTE_LENGTH)
MCFG_PALETTE_FORMAT(xBBBBBGGGGGRRRRR)
MCFG_DEVICE_ADD("gp9001", GP9001_VDP, 0)
MCFG_GFX_PALETTE("palette")
MCFG_VIDEO_START_OVERRIDE(toaplan2_state,bgaregga)
/* sound hardware */
MCFG_SPEAKER_STANDARD_MONO("mono")
MCFG_YM2151_ADD("ymsnd", XTAL_27MHz/8)
MCFG_SOUND_ROUTE(ALL_OUTPUTS, "mono", 1.0)
MCFG_OKIM6295_ADD("oki", XTAL_32MHz/32, OKIM6295_PIN7_HIGH)
MCFG_SOUND_ROUTE(ALL_OUTPUTS, "mono", 1.0)
MACHINE_CONFIG_END
static MACHINE_CONFIG_START( shippumd, toaplan2_state )
/* basic machine hardware */
MCFG_CPU_ADD("maincpu", M68000, XTAL_32MHz/2) /* 16MHz , 32MHz Oscillator */
MCFG_CPU_PROGRAM_MAP(shippumd_68k_mem)
MCFG_CPU_VBLANK_INT_DRIVER("screen", toaplan2_state, toaplan2_vblank_irq4)
MCFG_CPU_ADD("audiocpu", Z80, XTAL_32MHz/8) /* 4MHz , 32MHz Oscillator */
MCFG_CPU_PROGRAM_MAP(raizing_sound_z80_mem)
MCFG_QUANTUM_TIME(attotime::from_hz(600))
MCFG_MACHINE_START_OVERRIDE(toaplan2_state,toaplan2)
MCFG_MACHINE_RESET_OVERRIDE(toaplan2_state,toaplan2)
/* video hardware */
MCFG_SCREEN_ADD("screen", RASTER)
MCFG_SCREEN_VIDEO_ATTRIBUTES(VIDEO_UPDATE_BEFORE_VBLANK)
MCFG_SCREEN_RAW_PARAMS(XTAL_27MHz/4,432,0,320,262,0,240)
//MCFG_SCREEN_REFRESH_RATE(60)
//MCFG_SCREEN_SIZE(432, 262)
//MCFG_SCREEN_VISIBLE_AREA(0, 319, 0, 239)
MCFG_SCREEN_UPDATE_DRIVER(toaplan2_state, screen_update_truxton2)
MCFG_SCREEN_VBLANK_DRIVER(toaplan2_state, screen_eof_toaplan2)
MCFG_SCREEN_PALETTE("palette")
MCFG_GFXDECODE_ADD("gfxdecode", "palette", raizing)
MCFG_PALETTE_ADD("palette", T2PALETTE_LENGTH)
MCFG_PALETTE_FORMAT(xBBBBBGGGGGRRRRR)
MCFG_DEVICE_ADD("gp9001", GP9001_VDP, 0)
MCFG_GFX_PALETTE("palette")
MCFG_VIDEO_START_OVERRIDE(toaplan2_state,bgaregga)
/* sound hardware */
MCFG_SPEAKER_STANDARD_MONO("mono")
MCFG_YM2151_ADD("ymsnd", XTAL_27MHz/8)
MCFG_SOUND_ROUTE(ALL_OUTPUTS, "mono", 1.0)
MCFG_OKIM6295_ADD("oki", XTAL_32MHz/32, OKIM6295_PIN7_HIGH)
MCFG_SOUND_ROUTE(ALL_OUTPUTS, "mono", 1.0)
MACHINE_CONFIG_END
static MACHINE_CONFIG_START( bgaregga, toaplan2_state )
/* basic machine hardware */
MCFG_CPU_ADD("maincpu", M68000, XTAL_32MHz/2) /* 16MHz , 32MHz Oscillator */
MCFG_CPU_PROGRAM_MAP(bgaregga_68k_mem)
MCFG_CPU_VBLANK_INT_DRIVER("screen", toaplan2_state, toaplan2_vblank_irq4)
MCFG_CPU_ADD("audiocpu", Z80, XTAL_32MHz/8) /* 4MHz , 32MHz Oscillator */
MCFG_CPU_PROGRAM_MAP(bgaregga_sound_z80_mem)
MCFG_QUANTUM_TIME(attotime::from_hz(6000))
MCFG_MACHINE_START_OVERRIDE(toaplan2_state,toaplan2)
MCFG_MACHINE_RESET_OVERRIDE(toaplan2_state,toaplan2)
/* video hardware */
MCFG_SCREEN_ADD("screen", RASTER)
MCFG_SCREEN_VIDEO_ATTRIBUTES(VIDEO_UPDATE_BEFORE_VBLANK)
MCFG_SCREEN_RAW_PARAMS(XTAL_27MHz/4,432,0,320,262,0,240)
//MCFG_SCREEN_REFRESH_RATE(60)
//MCFG_SCREEN_SIZE(432, 262)
//MCFG_SCREEN_VISIBLE_AREA(0, 319, 0, 239)
MCFG_SCREEN_UPDATE_DRIVER(toaplan2_state, screen_update_truxton2)
MCFG_SCREEN_VBLANK_DRIVER(toaplan2_state, screen_eof_toaplan2)
MCFG_SCREEN_PALETTE("palette")
MCFG_GFXDECODE_ADD("gfxdecode", "palette", raizing)
MCFG_PALETTE_ADD("palette", T2PALETTE_LENGTH)
MCFG_PALETTE_FORMAT(xBBBBBGGGGGRRRRR)
MCFG_DEVICE_ADD("gp9001", GP9001_VDP, 0)
MCFG_GFX_PALETTE("palette")
MCFG_VIDEO_START_OVERRIDE(toaplan2_state,bgaregga)
/* sound hardware */
MCFG_SPEAKER_STANDARD_MONO("mono")
MCFG_GENERIC_LATCH_8_ADD("soundlatch")
MCFG_YM2151_ADD("ymsnd", XTAL_32MHz/8)
MCFG_SOUND_ROUTE(ALL_OUTPUTS, "mono", 1.0)
MCFG_OKIM6295_ADD("oki", XTAL_32MHz/16, OKIM6295_PIN7_HIGH)
MCFG_SOUND_ROUTE(ALL_OUTPUTS, "mono", 1.0)
MCFG_DEVICE_ADD("nmk112", NMK112, 0)
MCFG_NMK112_ROM0("oki")
MACHINE_CONFIG_END
static MACHINE_CONFIG_DERIVED( bgareggabl, bgaregga )
MCFG_VIDEO_START_OVERRIDE(toaplan2_state,bgareggabl)
MCFG_SCREEN_MODIFY("screen")
MCFG_SCREEN_UPDATE_DRIVER(toaplan2_state, screen_update_bootleg)
MACHINE_CONFIG_END
static MACHINE_CONFIG_START( batrider, toaplan2_state )
/* basic machine hardware */
MCFG_CPU_ADD("maincpu", M68000, XTAL_32MHz/2) /* 16MHz , 32MHz Oscillator */
MCFG_CPU_PROGRAM_MAP(batrider_68k_mem)
MCFG_CPU_VBLANK_INT_DRIVER("screen", toaplan2_state, toaplan2_vblank_irq2)
MCFG_CPU_ADD("audiocpu", Z80, XTAL_32MHz/8) /* 4MHz , 32MHz Oscillator */
MCFG_CPU_PROGRAM_MAP(batrider_sound_z80_mem)
MCFG_CPU_IO_MAP(batrider_sound_z80_port)
MCFG_QUANTUM_TIME(attotime::from_hz(600))
MCFG_MACHINE_START_OVERRIDE(toaplan2_state,toaplan2)
MCFG_MACHINE_RESET_OVERRIDE(toaplan2_state,toaplan2)
/* video hardware */
MCFG_SCREEN_ADD("screen", RASTER)
MCFG_SCREEN_VIDEO_ATTRIBUTES(VIDEO_UPDATE_BEFORE_VBLANK)
MCFG_SCREEN_RAW_PARAMS(XTAL_27MHz/4,432,0,320,262,0,240)
//MCFG_SCREEN_REFRESH_RATE(60)
//MCFG_SCREEN_SIZE(432, 262)
//MCFG_SCREEN_VISIBLE_AREA(0, 319, 0, 239)
MCFG_SCREEN_UPDATE_DRIVER(toaplan2_state, screen_update_truxton2)
MCFG_SCREEN_PALETTE("palette")
MCFG_GFXDECODE_ADD("gfxdecode", "palette", batrider)
MCFG_PALETTE_ADD("palette", T2PALETTE_LENGTH)
MCFG_PALETTE_FORMAT(xBBBBBGGGGGRRRRR)
MCFG_DEVICE_ADD("gp9001", GP9001_VDP, 0)
MCFG_GFX_PALETTE("palette")
MCFG_VIDEO_START_OVERRIDE(toaplan2_state,batrider)
/* sound hardware */
MCFG_SPEAKER_STANDARD_MONO("mono")
MCFG_GENERIC_LATCH_8_ADD("soundlatch")
MCFG_GENERIC_LATCH_8_ADD("soundlatch2")
MCFG_GENERIC_LATCH_8_ADD("soundlatch3")
MCFG_GENERIC_LATCH_8_ADD("soundlatch4")
MCFG_YM2151_ADD("ymsnd", XTAL_32MHz/8)
MCFG_SOUND_ROUTE(ALL_OUTPUTS, "mono", 1.0)
MCFG_OKIM6295_ADD("oki1", XTAL_32MHz/10, OKIM6295_PIN7_HIGH)
MCFG_SOUND_ROUTE(ALL_OUTPUTS, "mono", 1.0)
MCFG_OKIM6295_ADD("oki2", XTAL_32MHz/10, OKIM6295_PIN7_LOW)
MCFG_SOUND_ROUTE(ALL_OUTPUTS, "mono", 1.0)
MCFG_DEVICE_ADD("nmk112", NMK112, 0)
MCFG_NMK112_ROM0("oki1")
MCFG_NMK112_ROM1("oki2")
MACHINE_CONFIG_END
static MACHINE_CONFIG_START( bbakraid, toaplan2_state )
/* basic machine hardware */
MCFG_CPU_ADD("maincpu", M68000, XTAL_32MHz/2) /* 16MHz , 32MHz Oscillator */
MCFG_CPU_PROGRAM_MAP(bbakraid_68k_mem)
MCFG_CPU_VBLANK_INT_DRIVER("screen", toaplan2_state, toaplan2_vblank_irq1)
MCFG_CPU_ADD("audiocpu", Z80, XTAL_32MHz/6) /* 5.3333MHz , 32MHz Oscillator */
MCFG_CPU_PROGRAM_MAP(bbakraid_sound_z80_mem)
MCFG_CPU_IO_MAP(bbakraid_sound_z80_port)
MCFG_CPU_PERIODIC_INT_DRIVER(toaplan2_state, bbakraid_snd_interrupt, 448)
MCFG_QUANTUM_TIME(attotime::from_hz(600))
MCFG_MACHINE_START_OVERRIDE(toaplan2_state,toaplan2)
MCFG_MACHINE_RESET_OVERRIDE(toaplan2_state,toaplan2)
MCFG_EEPROM_SERIAL_93C66_8BIT_ADD("eeprom")
/* video hardware */
MCFG_SCREEN_ADD("screen", RASTER)
MCFG_SCREEN_VIDEO_ATTRIBUTES(VIDEO_UPDATE_BEFORE_VBLANK)
MCFG_SCREEN_RAW_PARAMS(XTAL_27MHz/4,432,0,320,262,0,240)
//MCFG_SCREEN_REFRESH_RATE(60)
//MCFG_SCREEN_SIZE(432, 262)
//MCFG_SCREEN_VISIBLE_AREA(0, 319, 0, 239)
MCFG_SCREEN_UPDATE_DRIVER(toaplan2_state, screen_update_truxton2)
MCFG_SCREEN_PALETTE("palette")
MCFG_GFXDECODE_ADD("gfxdecode", "palette", batrider)
MCFG_PALETTE_ADD("palette", T2PALETTE_LENGTH)
MCFG_PALETTE_FORMAT(xBBBBBGGGGGRRRRR)
MCFG_DEVICE_ADD("gp9001", GP9001_VDP, 0)
MCFG_GFX_PALETTE("palette")
MCFG_VIDEO_START_OVERRIDE(toaplan2_state,batrider)
/* sound hardware */
MCFG_SPEAKER_STANDARD_MONO("mono")
MCFG_GENERIC_LATCH_8_ADD("soundlatch")
MCFG_GENERIC_LATCH_8_ADD("soundlatch2")
MCFG_GENERIC_LATCH_8_ADD("soundlatch3")
MCFG_GENERIC_LATCH_8_ADD("soundlatch4")
MCFG_SOUND_ADD("ymz", YMZ280B, XTAL_16_9344MHz)
// IRQ not used ??? Connected to a test pin (TP082)
MCFG_SOUND_ROUTE(ALL_OUTPUTS, "mono", 1.0)
MACHINE_CONFIG_END
/***************************************************************************
Game driver(s)
***************************************************************************/
/* -------------------------- Toaplan games ------------------------- */
ROM_START( tekipaki )
ROM_REGION( 0x040000, "maincpu", 0 ) /* Main 68K code */
ROM_LOAD16_BYTE( "tp020-1.bin", 0x000000, 0x010000, CRC(d8420bd5) SHA1(30c1ad9e053cd7e79adb42aa428ebee28e144755) )
ROM_LOAD16_BYTE( "tp020-2.bin", 0x000001, 0x010000, CRC(7222de8e) SHA1(8352ae23efc24a2e20cc24b6d37cb8fc6b1a730c) )
ROM_REGION( 0x10000, "audiocpu", 0 ) /* Sound HD647180 code */
/* sound CPU is a HD647180 (Z180) with internal ROM - not yet supported */
ROM_LOAD( "hd647180.020", 0x00000, 0x08000, NO_DUMP )
ROM_REGION( 0x100000, "gp9001", 0 )
ROM_LOAD( "tp020-4.bin", 0x000000, 0x080000, CRC(3ebbe41e) SHA1(cea196c5f83e1a23d5b538a0db9bbbffa7af5118) )
ROM_LOAD( "tp020-3.bin", 0x080000, 0x080000, CRC(2d5e2201) SHA1(5846c844eedd48305c1c67dc645b6e070b3f5b98) )
ROM_END
ROM_START( ghox ) /* Spinner with single axis (up/down) controls */
ROM_REGION( 0x040000, "maincpu", 0 ) /* Main 68K code */
ROM_LOAD16_BYTE( "tp021-01.u10", 0x000000, 0x020000, CRC(9e56ac67) SHA1(daf241d9e55a6e60fc004ed61f787641595b1e62) )
ROM_LOAD16_BYTE( "tp021-02.u11", 0x000001, 0x020000, CRC(15cac60f) SHA1(6efa3a50a5dfe6ef4072738d6a7d0d95dca8a675) )
ROM_REGION( 0x10000, "audiocpu", 0 ) /* Sound HD647180 code */
/* sound CPU is a HD647180 (Z180) with internal ROM - not yet supported */
ROM_LOAD( "hd647180.021", 0x00000, 0x08000, NO_DUMP )
ROM_REGION( 0x100000, "gp9001", 0 )
ROM_LOAD( "tp021-03.u36", 0x000000, 0x080000, CRC(a15d8e9d) SHA1(640a33997bdce8e84bea6a944139716379839037) )
ROM_LOAD( "tp021-04.u37", 0x080000, 0x080000, CRC(26ed1c9a) SHA1(37da8af86ea24327444c2d4ad3dfbd936208d43d) )
ROM_END
ROM_START( ghoxj ) /* 8-way joystick for controls */
ROM_REGION( 0x040000, "maincpu", 0 ) /* Main 68K code */
ROM_LOAD16_BYTE( "tp021-01a.u10", 0x000000, 0x020000, CRC(c11b13c8) SHA1(da7defc1d3b6ddded910ba56c31fbbdb5ed57b09) )
ROM_LOAD16_BYTE( "tp021-02a.u11", 0x000001, 0x020000, CRC(8d426767) SHA1(1ed4a8bcbf4352257e7d58cb5c2c91eb48c2f047) )
ROM_REGION( 0x10000, "audiocpu", 0 ) /* Sound HD647180 code */
/* sound CPU is a HD647180 (Z180) with internal ROM - not yet supported */
ROM_LOAD( "hd647180.021", 0x00000, 0x08000, NO_DUMP )
ROM_REGION( 0x100000, "gp9001", 0 )
ROM_LOAD( "tp021-03.u36", 0x000000, 0x080000, CRC(a15d8e9d) SHA1(640a33997bdce8e84bea6a944139716379839037) )
ROM_LOAD( "tp021-04.u37", 0x080000, 0x080000, CRC(26ed1c9a) SHA1(37da8af86ea24327444c2d4ad3dfbd936208d43d) )
ROM_END
ROM_START( dogyuun )
ROM_REGION( 0x080000, "maincpu", 0 ) /* Main 68K code */
ROM_LOAD16_WORD_SWAP( "tp022_01.r16", 0x000000, 0x080000, CRC(79eb2429) SHA1(088c5ed0ed77557ab71f52cafe35028e3648ae1e) )
/* Secondary CPU is a Toaplan marked chip, (TS-002-MACH TOA PLAN) */
/* It's a NEC V25 (PLCC94) (encrypted program uploaded by main CPU) */
ROM_REGION( 0x200000, "gp9001", 0 )
ROM_LOAD16_WORD_SWAP( "tp022_3.w92", 0x000000, 0x100000, CRC(191b595f) SHA1(89344946daa18087cc83f92027cf5da659b1c7a5) )
ROM_LOAD16_WORD_SWAP( "tp022_4.w93", 0x100000, 0x100000, CRC(d58d29ca) SHA1(90d142fef37764ef817347a2bed77892a288a077) )
ROM_REGION( 0x400000, "gp9001_1", 0 )
ROM_LOAD16_WORD_SWAP( "tp022_5.w16", 0x000000, 0x200000, CRC(d4c1db45) SHA1(f5655467149ba737128c2f54c9c6cdaca6e4c35c) )
ROM_LOAD16_WORD_SWAP( "tp022_6.w17", 0x200000, 0x200000, CRC(d48dc74f) SHA1(081b5a00a2ff2bd82b98b30aab3cb5b6ae1014d5) )
ROM_REGION( 0x40000, "oki", 0 ) /* ADPCM Samples */
ROM_LOAD( "tp022_2.w30", 0x00000, 0x40000, CRC(043271b3) SHA1(c7eaa929e55dd956579b824ea9d20a1d0129a925) )
ROM_END
ROM_START( dogyuuna )
ROM_REGION( 0x080000, "maincpu", 0 ) /* Main 68K code */
ROM_LOAD16_WORD_SWAP( "01.u64", 0x000000, 0x080000, CRC(fe5bd7f4) SHA1(9c725466112a514c9ed0fb074422d291c175c3f4) )
/* Secondary CPU is a Toaplan marked chip, (TS-002-MACH TOA PLAN) */
/* It's a NEC V25 (PLCC94) (encrypted program uploaded by main CPU) */
ROM_REGION( 0x200000, "gp9001", 0 )
ROM_LOAD16_WORD_SWAP( "tp022_3.w92", 0x000000, 0x100000, CRC(191b595f) SHA1(89344946daa18087cc83f92027cf5da659b1c7a5) )
ROM_LOAD16_WORD_SWAP( "tp022_4.w93", 0x100000, 0x100000, CRC(d58d29ca) SHA1(90d142fef37764ef817347a2bed77892a288a077) )
ROM_REGION( 0x400000, "gp9001_1", 0 )
ROM_LOAD16_WORD_SWAP( "tp022_5.w16", 0x000000, 0x200000, CRC(d4c1db45) SHA1(f5655467149ba737128c2f54c9c6cdaca6e4c35c) )
ROM_LOAD16_WORD_SWAP( "tp022_6.w17", 0x200000, 0x200000, CRC(d48dc74f) SHA1(081b5a00a2ff2bd82b98b30aab3cb5b6ae1014d5) )
ROM_REGION( 0x40000, "oki", 0 ) /* ADPCM Samples */
ROM_LOAD( "tp022_2.w30", 0x00000, 0x40000, CRC(043271b3) SHA1(c7eaa929e55dd956579b824ea9d20a1d0129a925) )
ROM_END
ROM_START( dogyuunt )
ROM_REGION( 0x080000, "maincpu", 0 ) /* Main 68K code */
ROM_LOAD16_WORD_SWAP( "sample10.9.u64.bin", 0x000000, 0x080000, CRC(585f5016) SHA1(18d57843f33a560a3bb4b6aef176f7ef795b742d) )
/* Secondary CPU is a Toaplan marked chip, (TS-002-MACH TOA PLAN) */
/* It's a NEC V25 (PLCC94) (encrypted program uploaded by main CPU) */
ROM_REGION( 0x200000, "gp9001", 0 )
ROM_LOAD16_WORD_SWAP( "tp022_3.w92", 0x000000, 0x100000, CRC(191b595f) SHA1(89344946daa18087cc83f92027cf5da659b1c7a5) )
ROM_LOAD16_WORD_SWAP( "tp022_4.w93", 0x100000, 0x100000, CRC(d58d29ca) SHA1(90d142fef37764ef817347a2bed77892a288a077) )
ROM_REGION( 0x400000, "gp9001_1", 0 )
ROM_LOAD16_WORD_SWAP( "tp022_5.w16", 0x000000, 0x200000, CRC(d4c1db45) SHA1(f5655467149ba737128c2f54c9c6cdaca6e4c35c) )
ROM_LOAD16_WORD_SWAP( "tp022_6.w17", 0x200000, 0x200000, CRC(d48dc74f) SHA1(081b5a00a2ff2bd82b98b30aab3cb5b6ae1014d5) )
ROM_REGION( 0x40000, "oki", 0 ) /* ADPCM Samples */
ROM_LOAD( "tp022_2.w30", 0x00000, 0x40000, CRC(043271b3) SHA1(c7eaa929e55dd956579b824ea9d20a1d0129a925) )
ROM_END
ROM_START( kbash )
ROM_REGION( 0x080000, "maincpu", 0 ) /* Main 68K code */
ROM_LOAD16_WORD_SWAP( "tp023_01.bin", 0x000000, 0x080000, CRC(2965f81d) SHA1(46f2df30fa92c80ba5a37f75e756424e15534784) )
/* Secondary CPU is a Toaplan marked chip, (TS-004-Dash TOA PLAN) */
/* It's a NEC V25 (PLCC94) (encrypted) */
ROM_REGION( 0x8000, "audiocpu", 0 ) /* Sound CPU code */
ROM_LOAD( "tp023_02.bin", 0x0000, 0x8000, CRC(4cd882a1) SHA1(7199a5c384918f775f0815e09c46b2a58141814a) )
ROM_REGION( 0x800000, "gp9001", 0 )
ROM_LOAD( "tp023_3.bin", 0x000000, 0x200000, CRC(32ad508b) SHA1(e473489beaf649d3e5236770eb043327e309850c) )
ROM_LOAD( "tp023_5.bin", 0x200000, 0x200000, CRC(b84c90eb) SHA1(17a1531d884d9a9696d1b25d65f9155f02396e0e) )
ROM_LOAD( "tp023_4.bin", 0x400000, 0x200000, CRC(e493c077) SHA1(0edcfb70483ad07206695d9283031b85cd198a36) )
ROM_LOAD( "tp023_6.bin", 0x600000, 0x200000, CRC(9084b50a) SHA1(03b58278619524d2f09a4b1c152d5e057e792a56) )
ROM_REGION( 0x40000, "oki", 0 ) /* ADPCM Samples */
ROM_LOAD( "tp023_7.bin", 0x00000, 0x40000, CRC(3732318f) SHA1(f0768459f5ad2dee53d408a0a5ae3a314864e667) )
ROM_END
ROM_START( kbashk )
ROM_REGION( 0x080000, "maincpu", 0 ) /* Main 68K code */
ROM_LOAD16_WORD_SWAP( "tp023_01.u52", 0x000000, 0x080000, CRC(099aefbc) SHA1(8daa0deffe221e1bb5a8744ced18c23ad319ffd3) ) // same label as parent?
/* Secondary CPU is a Toaplan marked chip, (TS-004-Dash TOA PLAN) */
/* It's a NEC V25 (PLCC94) (encrypted) */
ROM_REGION( 0x8000, "audiocpu", 0 ) /* Sound CPU code */
ROM_LOAD( "tp023_02.bin", 0x0000, 0x8000, CRC(4cd882a1) SHA1(7199a5c384918f775f0815e09c46b2a58141814a) )
ROM_REGION( 0x800000, "gp9001", 0 )
ROM_LOAD( "tp023_3.bin", 0x000000, 0x200000, CRC(32ad508b) SHA1(e473489beaf649d3e5236770eb043327e309850c) )
ROM_LOAD( "tp023_5.bin", 0x200000, 0x200000, CRC(b84c90eb) SHA1(17a1531d884d9a9696d1b25d65f9155f02396e0e) )
ROM_LOAD( "tp023_4.bin", 0x400000, 0x200000, CRC(e493c077) SHA1(0edcfb70483ad07206695d9283031b85cd198a36) )
ROM_LOAD( "tp023_6.bin", 0x600000, 0x200000, CRC(9084b50a) SHA1(03b58278619524d2f09a4b1c152d5e057e792a56) )
ROM_REGION( 0x40000, "oki", 0 ) /* ADPCM Samples */
ROM_LOAD( "tp023_7.bin", 0x00000, 0x40000, CRC(3732318f) SHA1(f0768459f5ad2dee53d408a0a5ae3a314864e667) )
ROM_END
/*
Knuckle Bash 2
This is a hacked version of Knuckle Bash on bootleg/Korean/Chinese
hardware showing (C)Toaplan 1999 Licensed to Charterfield
PCB Layout
----------
|--------------------------------------------|
|UPC1241 EPROM MECAT-S |
| LM324 |
| M6295 M6295 |
| PAL 62256 M5M51008 |
| 62256 MECAT-M M5M51008 |
| 6116 M5M51008 |
|J 6116 14.31818MHz M5M51008 |
|A 68000 |
|M 16MHz |
|M PAL |
|A PAL |
| |-------| |
| |ACTEL | PAL |
| |A40MX04| PAL |
| | | |
| DSW1 |-------| 050917-10 |
| |ACTEL | |
| DSW2 |A40MX04| MECAT-12 |
|62256 | | |
|62256 |-------| MECAT-34 |
|--------------------------------------------|
Notes:
68000 clock 16.000MHz
M6295 clock 1.000MHz [16/16]. Sample rate (Hz) 16000000/16/132
M5M51008 - Mitsubishi M5M51008 128k x8 SRAM (SOP32)
62256 - 32k x8 SRAM
6116 - 2k x8 SRAM
VSync 60Hz
HSync 15.68kHz
*/
ROM_START( kbash2 )
ROM_REGION( 0x80000, "maincpu", 0 ) /* Main 68K code */
ROM_LOAD16_WORD_SWAP( "mecat-m", 0x000000, 0x80000, CRC(bd2263c6) SHA1(eb794c0fc9c1fb4337114d48149283d42d22e4b3) )
ROM_REGION( 0x800000, "gp9001", 0 )
ROM_LOAD( "mecat-34", 0x000000, 0x400000, CRC(6be7b37e) SHA1(13160ad0712fee932bb98cc226e651895b19228a) )
ROM_LOAD( "mecat-12", 0x400000, 0x400000, CRC(49e46b1f) SHA1(d12b12696a8473eb34f3cd247ab060289a6c0e9c) )
ROM_REGION( 0x80000, "oki1", 0 ) /* ADPCM Music */
ROM_LOAD( "mecat-s", 0x00000, 0x80000, CRC(3eb7adf4) SHA1(b0e6e99726b854858bd0e69eb77f12b9664b35e6) )
ROM_REGION( 0x40000, "oki2", 0 ) /* ADPCM Samples */
ROM_LOAD( "eprom", 0x00000, 0x40000, CRC(31115cb9) SHA1(c79ea01bd865e2fc3aaab3ff05483c8fd27e5c98) )
ROM_REGION( 0x10000, "user1", 0 ) /* ??? Some sort of table - same as in pipibibi*/
ROM_LOAD( "050917-10", 0x0000, 0x10000, CRC(6b213183) SHA1(599c59d155d11edb151bfaed1d24ef964462a447) )
ROM_END
ROM_START( truxton2 )
ROM_REGION( 0x080000, "maincpu", 0 ) /* Main 68K code */
/* program ROM is byte swapped ! */
ROM_LOAD16_WORD( "tp024_1.bin", 0x000000, 0x080000, CRC(f5cfe6ee) SHA1(30979888a4cd6500244117748f28386a7e20a169) )
ROM_REGION( 0x200000, "gp9001", 0 )
ROM_LOAD( "tp024_4.bin", 0x000000, 0x100000, CRC(805c449e) SHA1(fdf985344145bd320b88b9b0c25e73066c9b2ada) )
ROM_LOAD( "tp024_3.bin", 0x100000, 0x100000, CRC(47587164) SHA1(bac493e2d5507286b984957b289c929335d27eaa) )
ROM_REGION( 0x80000, "oki", 0 ) /* ADPCM Samples */
ROM_LOAD( "tp024_2.bin", 0x00000, 0x80000, CRC(f2f6cae4) SHA1(bb4e8c36531bed97ced4696ca12fd40ede2531aa) )
ROM_END
ROM_START( pipibibs )
ROM_REGION( 0x040000, "maincpu", 0 ) /* Main 68K code */
ROM_LOAD16_BYTE( "tp025-1.bin", 0x000000, 0x020000, CRC(b2ea8659) SHA1(400431b656dbfbd5a9bc5961c3ea04c4d38b6f77) )
ROM_LOAD16_BYTE( "tp025-2.bin", 0x000001, 0x020000, CRC(dc53b939) SHA1(e4de371f97ba7c350273ad43b7f58ff31672a269) )
ROM_REGION( 0x10000, "audiocpu", 0 ) /* Sound Z80 code */
ROM_LOAD( "tp025-5.bin", 0x0000, 0x8000, CRC(bf8ffde5) SHA1(79c09cc9a0ea979f5af5a7e5ad671ea486f5f43e) )
ROM_REGION( 0x200000, "gp9001", 0 )
ROM_LOAD( "tp025-4.bin", 0x000000, 0x100000, CRC(ab97f744) SHA1(c1620e614345dbd5c6567e4cb6f55c61b900d0ee) )
ROM_LOAD( "tp025-3.bin", 0x100000, 0x100000, CRC(7b16101e) SHA1(ae0119bbfa0937d18c4fbb0a3ef7cdc3b9fa6b56) )
ROM_END
ROM_START( pipibibsa )
ROM_REGION( 0x040000, "maincpu", 0 ) /* Main 68K code */
ROM_LOAD16_BYTE( "tp025-1.alt.bin", 0x000000, 0x020000, CRC(3e522d98) SHA1(043dd76b99e130909e47063d4cc773177a2eaccf) )
ROM_LOAD16_BYTE( "tp025-2.alt.bin", 0x000001, 0x020000, CRC(48370485) SHA1(9895e086c9a5eeec4f454cbc6098adb2f66d4e11) )
ROM_REGION( 0x10000, "audiocpu", 0 ) /* Sound Z80 code */
ROM_LOAD( "tp025-5.bin", 0x0000, 0x8000, CRC(bf8ffde5) SHA1(79c09cc9a0ea979f5af5a7e5ad671ea486f5f43e) )
ROM_REGION( 0x200000, "gp9001", 0 )
ROM_LOAD( "tp025-4.bin", 0x000000, 0x100000, CRC(ab97f744) SHA1(c1620e614345dbd5c6567e4cb6f55c61b900d0ee) )
ROM_LOAD( "tp025-3.bin", 0x100000, 0x100000, CRC(7b16101e) SHA1(ae0119bbfa0937d18c4fbb0a3ef7cdc3b9fa6b56) )
ROM_END
ROM_START( whoopee )
ROM_REGION( 0x040000, "maincpu", 0 ) /* Main 68K code */
ROM_LOAD16_BYTE( "whoopee.1", 0x000000, 0x020000, CRC(28882e7e) SHA1(8fcd278a7d005eb81cd9e461139c0c0f756a4fa4) )
ROM_LOAD16_BYTE( "whoopee.2", 0x000001, 0x020000, CRC(6796f133) SHA1(d4e657be260ba3fd3f0556ade617882513b52685) )
ROM_REGION( 0x10000, "audiocpu", 0 ) /* Sound HD647180 code */
/* sound CPU is a HD647180 (Z180) with internal ROM - not yet supported */
ROM_LOAD( "hd647180.025", 0x00000, 0x08000, NO_DUMP )
ROM_REGION( 0x200000, "gp9001", 0 )
ROM_LOAD( "tp025-4.bin", 0x000000, 0x100000, CRC(ab97f744) SHA1(c1620e614345dbd5c6567e4cb6f55c61b900d0ee) )
ROM_LOAD( "tp025-3.bin", 0x100000, 0x100000, CRC(7b16101e) SHA1(ae0119bbfa0937d18c4fbb0a3ef7cdc3b9fa6b56) )
ROM_END
ROM_START( pipibibsp )
ROM_REGION( 0x080000, "maincpu", 0 ) /* Main 68K code */
ROM_LOAD16_BYTE( "pip_cpu_e", 0x000000, 0x020000, CRC(ae3205bd) SHA1(1613fec637dfed213433dca0d267e49f4848df81) )
ROM_LOAD16_BYTE( "pip_cpu_o", 0x000001, 0x020000, CRC(241669a9) SHA1(234e0bb819453e16625d15d2cf22496bbc547943) )
ROM_REGION( 0x10000, "audiocpu", 0 ) /* Sound Z80 code */
ROM_LOAD( "pip_snd", 0x0000, 0x8000, CRC(8ebf183b) SHA1(602b138c85b02d121d007f6788b322aa107c7d91) )
ROM_REGION( 0x200000, "gp9001", 0 )
ROM_LOAD( "cg_01_l", 0x000000, 0x080000, CRC(21d1ef46) SHA1(d7ccbe56eb08be421c241065cbaa99cc9cca4d73) )
ROM_LOAD( "cg_01_h", 0x080000, 0x080000, CRC(d5726328) SHA1(26401ba8ce22fda161306b91d70afefa959cde8c) )
ROM_LOAD( "cg_23_l", 0x100000, 0x080000, CRC(114d41d0) SHA1(d1166d495d92c6082fffbed422deb7605c5a41a2) )
ROM_LOAD( "cg_23_h", 0x180000, 0x080000, CRC(e0468152) SHA1(f5a872d8658e959ec6cce51c7798291b5b973f15) )
ROM_END
ROM_START( pipibibsbl ) /* Based off the proto code. */
ROM_REGION( 0x040000, "maincpu", 0 ) /* Main 68K code */
ROM_LOAD16_BYTE( "ppbb06.bin", 0x000000, 0x020000, CRC(14c92515) SHA1(2d7f7c89272bb2a8115f163ad651bef3bca5107e) )
ROM_LOAD16_BYTE( "ppbb05.bin", 0x000001, 0x020000, CRC(3d51133c) SHA1(d7bd94ad11e9aeb5a5165c5ac6f71950849bcd2f) )
ROM_REGION( 0x10000, "audiocpu", 0 ) /* Sound Z80 code */
ROM_LOAD( "ppbb08.bin", 0x0000, 0x8000, CRC(101c0358) SHA1(162e02d00b7bdcdd3b48a0cd0527b7428435ec50) )
ROM_REGION( 0x200000, "gp9001", 0 )
/* GFX data differs slightly from Toaplan boards ??? */
ROM_LOAD16_BYTE( "ppbb01.bin", 0x000000, 0x080000, CRC(0fcae44b) SHA1(ac72bc79e3a5d0a81647c312d310d00ace017272) )
ROM_LOAD16_BYTE( "ppbb02.bin", 0x000001, 0x080000, CRC(8bfcdf87) SHA1(4537a7d646d3014f069c6fd0be457bb32e2f18ac) )
ROM_LOAD16_BYTE( "ppbb03.bin", 0x100000, 0x080000, CRC(abdd2b8b) SHA1(a4246dd63515f01d1227c9a9e16d9f1c739ee39e) )
ROM_LOAD16_BYTE( "ppbb04.bin", 0x100001, 0x080000, CRC(70faa734) SHA1(4448f4dbded56c142e57293d371e0a422c3a667e) )
ROM_REGION( 0x8000, "user1", 0 ) /* ??? Some sort of table */
ROM_LOAD( "ppbb07.bin", 0x0000, 0x8000, CRC(456dd16e) SHA1(84779ee64d3ea33ba1ba4dee39b504a81c6811a1) )
ROM_END
#define ROMS_FIXEIGHT \
ROM_REGION( 0x080000, "maincpu", 0 ) \
ROM_LOAD16_WORD_SWAP( "tp-026-1", 0x000000, 0x080000, CRC(f7b1746a) SHA1(0bbea6f111b818bc9b9b2060af4fe900f37cf7f9) ) \
ROM_REGION( 0x400000, "gp9001", 0 ) \
ROM_LOAD( "tp-026-3", 0x000000, 0x200000, CRC(e5578d98) SHA1(280d2b716d955e767d311fc9596823852435b6d7) ) \
ROM_LOAD( "tp-026-4", 0x200000, 0x200000, CRC(b760cb53) SHA1(bc9c5e49e45cdda0f774be0038aa4deb21d4d285) ) \
ROM_REGION( 0x40000, "oki", 0 ) \
ROM_LOAD( "tp-026-2", 0x00000, 0x40000, CRC(85063f1f) SHA1(1bf4d77494de421c98f6273b9876e60d827a6826) )
// note you may need to byteswap these EEPROM files to reprogram the original chip, this is the same for many supported in MAME.
ROM_START( fixeightkt )
ROMS_FIXEIGHT
ROM_REGION16_BE( 0x80, "eeprom", 0 )
ROM_LOAD( "fixeightkt.nv", 0x00, 0x80, CRC(08fa73ba) SHA1(b7761d3dd3f4485e55c8ef2cf1a840ca771ee2fc) )
ROM_END
ROM_START( fixeightk )
ROMS_FIXEIGHT
ROM_REGION16_BE( 0x80, "eeprom", 0 )
ROM_LOAD( "fixeightk.nv", 0x00, 0x80, CRC(cac91c6f) SHA1(55b284f081753d60abff63493094322756b7f0c5) )
ROM_END
ROM_START( fixeightht )
ROMS_FIXEIGHT
ROM_REGION16_BE( 0x80, "eeprom", 0 )
ROM_LOAD( "fixeightht.nv", 0x00, 0x80, CRC(57edaa51) SHA1(b8d50e82590b8cbbbcafec5f9cfbc91e4c286db5) )
ROM_END
ROM_START( fixeighth )
ROMS_FIXEIGHT
ROM_REGION16_BE( 0x80, "eeprom", 0 )
ROM_LOAD( "fixeighth.nv", 0x00, 0x80, CRC(95dec584) SHA1(1c309074b51da5a5263dee00403296946e41067b) )
ROM_END
ROM_START( fixeighttwt )
ROMS_FIXEIGHT
ROM_REGION16_BE( 0x80, "eeprom", 0 )
ROM_LOAD( "fixeighttwt.nv", 0x00, 0x80, CRC(b6d5c06c) SHA1(7fda380ac6835a983c57d093ccad7bd76893c9ba))
ROM_END
ROM_START( fixeighttw )
ROMS_FIXEIGHT
ROM_REGION16_BE( 0x80, "eeprom", 0 )
ROM_LOAD( "fixeighttw.nv", 0x00, 0x80, CRC(74e6afb9) SHA1(87bdc95eb0d2d54375de2c622557d503e14154be))
ROM_END
ROM_START( fixeightat )
ROMS_FIXEIGHT
ROM_REGION16_BE( 0x80, "eeprom", 0 )
ROM_LOAD( "fixeightat.nv", 0x00, 0x80,CRC(e9c21987) SHA1(7f699e38deb84902ed62b857a3d2b4e3ea1475bb) )
ROM_END
ROM_START( fixeighta )
ROMS_FIXEIGHT
ROM_REGION16_BE( 0x80, "eeprom", 0 )
ROM_LOAD( "fixeighta.nv", 0x00, 0x80, CRC(2bf17652) SHA1(4ec6f188e63610d258cd6b2432d2200d61d80bed))
ROM_END
ROM_START( fixeightt )
ROMS_FIXEIGHT
ROM_REGION16_BE( 0x80, "eeprom", 0 )
ROM_LOAD( "fixeightt.nv", 0x00, 0x80, CRC(c0da4a05) SHA1(3686161244e3e8be0e2fdb5fc5c24e39a7aeba85) )
ROM_END
ROM_START( fixeight )
ROMS_FIXEIGHT
ROM_REGION16_BE( 0x80, "eeprom", 0 )
ROM_LOAD( "fixeight.nv", 0x00, 0x80, CRC(02e925d0) SHA1(5839d10aceff84916ea99e9c6afcdc90eef7468b) )
ROM_END
ROM_START( fixeightut )
ROMS_FIXEIGHT
ROM_REGION16_BE( 0x80, "eeprom", 0 )
ROM_LOAD( "fixeightut.nv", 0x00, 0x80, CRC(9fcd93ee) SHA1(4f2750f09d9b8ff358a2fd6c7a4a8ba6de67017a) )
ROM_END
ROM_START( fixeightu )
ROMS_FIXEIGHT
ROM_REGION16_BE( 0x80, "eeprom", 0 )
ROM_LOAD( "fixeightu.nv", 0x00, 0x80, CRC(5dfefc3b) SHA1(5203525c58e2ae10575af2e277a5696bd64c5b60) )
ROM_END
ROM_START( fixeightj )
ROMS_FIXEIGHT
ROM_REGION16_BE( 0x80, "eeprom", 0 )
ROM_LOAD( "fixeightj.nv", 0x00, 0x80, CRC(21e22038) SHA1(29fb10061e62799bb5e4171e144daac49f0cdf06) )
ROM_END
ROM_START( fixeightjt )
ROMS_FIXEIGHT
ROM_REGION16_BE( 0x80, "eeprom", 0 )
ROM_LOAD( "fixeightjt.nv", 0x00, 0x80, CRC(e3d14fed) SHA1(ee4982ef195240c5eaa5005ca1d591901fb01b47) )
ROM_END
/*
Fix Eight (bootleg)
Toaplan, 1992
PCB Layout
----------
|--------------------------------------------|
| 1.BIN PAL 14MHz PAL|
| M6295 PAL |
| PAL 6116 4.BIN 681000 681000|
| 6116 |
| 6116 681000 681000|
|J 6116 PAL |
|A PAL |
|M |
|M 62256 62256 PAL |
|A 2.BIN 3.BIN PAL |
| PAL |
| 68000 PAL |
| DSW2 |------| 5.BIN |
| DSW1 6264 |TPC | |
| 3.579545MHz |1020 | 6.BIN |
| 10MHz 6264 |------| 7.BIN |
|--------------------------------------------|
Notes:
68000 clock at 10.000MHz
M6295 clock at 875kHz [14M/16]. Sample rate = 875000 / 165
VSync at 60Hz
6116 - 2k x8 SRAM (x4)
6264 - 8k x8 SRAM (x2)
62256 - 32k x8 SRAM (x2)
681000- 128k x8 SRAM (x4)
*/
ROM_START( fixeightbl )
ROM_REGION( 0x100000, "maincpu", 0 ) /* Main 68K code */
ROM_LOAD16_BYTE( "3.bin", 0x000000, 0x80000, CRC(cc77d4b4) SHA1(4d3376cbae13d90c6314d8bb9236c2183fc6253c) )
ROM_LOAD16_BYTE( "2.bin", 0x000001, 0x80000, CRC(ed715488) SHA1(37be9bc8ff6b54a1f660d89469c6c2da6301e9cd) )
ROM_REGION( 0x400000, "gp9001", 0 )
ROM_LOAD( "tp-026-3", 0x000000, 0x200000, CRC(e5578d98) SHA1(280d2b716d955e767d311fc9596823852435b6d7) )
ROM_LOAD( "tp-026-4", 0x200000, 0x200000, CRC(b760cb53) SHA1(bc9c5e49e45cdda0f774be0038aa4deb21d4d285) )
ROM_REGION( 0x08000, "text", 0)
ROM_LOAD( "4.bin", 0x00000, 0x08000, CRC(a6aca465) SHA1(2b331faeee1832e0adc5218254a99d66331862c6) )
ROM_REGION( 0x80000, "oki", 0 ) /* ADPCM Samples */
ROM_LOAD( "1.bin", 0x00000, 0x80000, CRC(888f19ac) SHA1(d2f4f8b7be7a0fdb95baa0af8930e50e2f875c05) )
ROM_REGION( 0x8000, "user1", 0 ) /* ??? Some sort of table - same as in pipibibsbl */
ROM_LOAD( "5.bin", 0x0000, 0x8000, CRC(456dd16e) SHA1(84779ee64d3ea33ba1ba4dee39b504a81c6811a1) )
ROM_END
ROM_START( grindstm )
ROM_REGION( 0x080000, "maincpu", 0 ) /* Main 68K code */
ROM_LOAD16_WORD_SWAP( "01.bin", 0x000000, 0x080000, CRC(4923f790) SHA1(1c2d66b432d190d0fb6ac7ca0ec0687aea3ccbf4) )
/* Secondary CPU is a Toaplan marked chip, (TS-007-Spy TOA PLAN) */
/* It's a NEC V25 (PLCC94) (encrypted program uploaded by main CPU) */
ROM_REGION( 0x200000, "gp9001", 0 )
ROM_LOAD( "tp027_02.bin", 0x000000, 0x100000, CRC(877b45e8) SHA1(b3ed8d8dbbe51a1919afc55d619d2b6771971493) )
ROM_LOAD( "tp027_03.bin", 0x100000, 0x100000, CRC(b1fc6362) SHA1(5e97e3cce31be57689d394a50178cda4d80cce5f) )
ROM_END
ROM_START( grindstma )
ROM_REGION( 0x080000, "maincpu", 0 ) /* Main 68K code */
ROM_LOAD16_WORD_SWAP( "tp027-01.rom", 0x000000, 0x080000, CRC(8d8c0392) SHA1(824dde274c8bef8a87c54d8ccdda7f0feb8d11e1) )
/* Secondary CPU is a Toaplan marked chip, (TS-007-Spy TOA PLAN) */
/* It's a NEC V25 (PLCC94) (encrypted program uploaded by main CPU) */
ROM_REGION( 0x200000, "gp9001", 0 )
ROM_LOAD( "tp027_02.bin", 0x000000, 0x100000, CRC(877b45e8) SHA1(b3ed8d8dbbe51a1919afc55d619d2b6771971493) )
ROM_LOAD( "tp027_03.bin", 0x100000, 0x100000, CRC(b1fc6362) SHA1(5e97e3cce31be57689d394a50178cda4d80cce5f) )
ROM_END
ROM_START( vfive )
ROM_REGION( 0x080000, "maincpu", 0 ) /* Main 68K code */
ROM_LOAD16_WORD_SWAP( "tp027_01.bin", 0x000000, 0x080000, CRC(731d50f4) SHA1(794255d0a809cda9170f5bac473df9d7f0efdac8) )
/* Secondary CPU is a Toaplan marked chip, (TS-007-Spy TOA PLAN) */
/* It's a NEC V25 (PLCC94) (encrypted program uploaded by main CPU) */
ROM_REGION( 0x200000, "gp9001", 0 )
ROM_LOAD( "tp027_02.bin", 0x000000, 0x100000, CRC(877b45e8) SHA1(b3ed8d8dbbe51a1919afc55d619d2b6771971493) )
ROM_LOAD( "tp027_03.bin", 0x100000, 0x100000, CRC(b1fc6362) SHA1(5e97e3cce31be57689d394a50178cda4d80cce5f) )
ROM_END
ROM_START( batsugun )
ROM_REGION( 0x080000, "maincpu", 0 ) /* Main 68K code */
ROM_LOAD16_WORD_SWAP( "tp030_1a.bin", 0x000000, 0x080000, CRC(cb1d4554) SHA1(ef31f24d77e1c13bdf5558a04a6253e2e3e6a790) )
/* Secondary CPU is a Toaplan marked chip, (TS-007-Spy TOA PLAN) */
/* It's a NEC V25 (PLCC94) (program uploaded by main CPU) */
ROM_REGION( 0x400000, "gp9001", 0 )
ROM_LOAD( "tp030_3l.bin", 0x000000, 0x100000, CRC(3024b793) SHA1(e161db940f069279356fca2c5bf2753f07773705) )
ROM_LOAD( "tp030_3h.bin", 0x100000, 0x100000, CRC(ed75730b) SHA1(341f0f728144a049486d996c9bb14078578c6879) )
ROM_LOAD( "tp030_4l.bin", 0x200000, 0x100000, CRC(fedb9861) SHA1(4b0917056bd359b21935358c6bcc729262be6417) )
ROM_LOAD( "tp030_4h.bin", 0x300000, 0x100000, CRC(d482948b) SHA1(31be7dc5cff072403b783bf203b9805ffcad7284) )
ROM_REGION( 0x200000, "gp9001_1", 0 )
ROM_LOAD( "tp030_5.bin", 0x000000, 0x100000, CRC(bcf5ba05) SHA1(40f98888a29cdd30cda5dfb60fdc667c69b0fdb0) )
ROM_LOAD( "tp030_6.bin", 0x100000, 0x100000, CRC(0666fecd) SHA1(aa8f921fc51590b5b05bbe0b0ad0cce5ff359c64) )
ROM_REGION( 0x40000, "oki", 0 ) /* ADPCM Samples */
ROM_LOAD( "tp030_2.bin", 0x00000, 0x40000, CRC(276146f5) SHA1(bf11d1f6782cefcad77d52af4f7e6054a8f93440) )
ROM_REGION( 0x1000, "plds", 0 ) /* Logic for mixing output of both GP9001 GFX controllers */
ROM_LOAD( "tp030_u19_gal16v8b-15.bin", 0x0000, 0x117, CRC(f71669e8) SHA1(ec1fbe04605fee864af4b01f001af227938c9f21) )
// ROM_LOAD( "tp030_u19_gal16v8b-15.jed", 0x0000, 0x991, CRC(31be54a2) SHA1(06278942a9a2ea858c0352b2ef5a65bf329b7b82) )
ROM_END
ROM_START( batsuguna )
ROM_REGION( 0x080000, "maincpu", 0 ) /* Main 68K code */
ROM_LOAD16_WORD_SWAP( "tp030_01.bin", 0x000000, 0x080000, CRC(3873d7dd) SHA1(baf6187d7d554cfcf4a86b63f07fc30df7ef84c9) )
/* Secondary CPU is a Toaplan marked chip, (TS-007-Spy TOA PLAN) */
/* It's a NEC V25 (PLCC94) (program uploaded by main CPU) */
ROM_REGION( 0x400000, "gp9001", 0 )
ROM_LOAD( "tp030_3l.bin", 0x000000, 0x100000, CRC(3024b793) SHA1(e161db940f069279356fca2c5bf2753f07773705) )
ROM_LOAD( "tp030_3h.bin", 0x100000, 0x100000, CRC(ed75730b) SHA1(341f0f728144a049486d996c9bb14078578c6879) )
ROM_LOAD( "tp030_4l.bin", 0x200000, 0x100000, CRC(fedb9861) SHA1(4b0917056bd359b21935358c6bcc729262be6417) )
ROM_LOAD( "tp030_4h.bin", 0x300000, 0x100000, CRC(d482948b) SHA1(31be7dc5cff072403b783bf203b9805ffcad7284) )
ROM_REGION( 0x200000, "gp9001_1", 0 )
ROM_LOAD( "tp030_5.bin", 0x000000, 0x100000, CRC(bcf5ba05) SHA1(40f98888a29cdd30cda5dfb60fdc667c69b0fdb0) )
ROM_LOAD( "tp030_6.bin", 0x100000, 0x100000, CRC(0666fecd) SHA1(aa8f921fc51590b5b05bbe0b0ad0cce5ff359c64) )
ROM_REGION( 0x40000, "oki", 0 ) /* ADPCM Samples */
ROM_LOAD( "tp030_2.bin", 0x00000, 0x40000, CRC(276146f5) SHA1(bf11d1f6782cefcad77d52af4f7e6054a8f93440) )
ROM_REGION( 0x1000, "plds", 0 ) /* Logic for mixing output of both GP9001 GFX controllers */
ROM_LOAD( "tp030_u19_gal16v8b-15.bin", 0x0000, 0x117, CRC(f71669e8) SHA1(ec1fbe04605fee864af4b01f001af227938c9f21) )
ROM_END
ROM_START( batsugunb )
ROM_REGION( 0x080000, "maincpu", 0 ) /* Main 68K code */
ROM_LOAD16_WORD_SWAP( "large_rom1.bin", 0x000000, 0x080000, CRC(c9de8ed8) SHA1(8de9acd26e83c8ea3388137da528704116aa7bdb) )
/* Secondary CPU is a Toaplan marked chip, (TS-007-Spy TOA PLAN) */
/* It's a NEC V25 (PLCC94) (program uploaded by main CPU) */
ROM_REGION( 0x400000, "gp9001", 0 )
ROM_LOAD16_BYTE( "rom12.bin", 0x000000, 0x080000, CRC(d25affc6) SHA1(00803ae5a2bc06edbfb9ea6e3df51f195bbee8cb) )
ROM_LOAD16_BYTE( "rom6.bin", 0x000001, 0x080000, CRC(ddd6df60) SHA1(3b46945c51e7b10b473d98916f075e8def336ce7) )
ROM_LOAD16_BYTE( "rom11.bin", 0x100000, 0x080000, CRC(ed72fe3e) SHA1(5c0f4d5cc84b45e1924dacfa4c0b602cc1600b2f) )
ROM_LOAD16_BYTE( "rom5.bin", 0x100001, 0x080000, CRC(fd44b33b) SHA1(791cf6056a2dbafa5f41f1dcf686947ee990647d) )
ROM_LOAD16_BYTE( "rom10.bin", 0x200000, 0x080000, CRC(86b2c6a9) SHA1(b3f39246012c6cd9df69a6797d56479523b33bcb) )
ROM_LOAD16_BYTE( "rom4.bin", 0x200001, 0x080000, CRC(e7c1c623) SHA1(0d8922ce901b5f74f1bd397d5d9c6ab4e918b1d1) )
ROM_LOAD16_BYTE( "rom9.bin", 0x300000, 0x080000, CRC(fda8ee00) SHA1(d5ea617a72b2721386eb2dfc15b76de2e30f069c) )
ROM_LOAD16_BYTE( "rom3.bin", 0x300001, 0x080000, CRC(a7c4dee8) SHA1(94e2dda067612fac810157f8cf392b685b38798b) )
ROM_REGION( 0x200000, "gp9001_1", 0 )
ROM_LOAD16_BYTE( "rom8.bin", 0x000000, 0x080000, CRC(a2c6a170) SHA1(154048ddc8ca2b4e9617e142d904ad2698b0ad02) )
ROM_LOAD16_BYTE( "rom2.bin", 0x000001, 0x080000, CRC(a457e202) SHA1(4a9f2f95c866fc9d40af1c57ce1940f0a6dc1b82) )
ROM_LOAD16_BYTE( "rom7.bin", 0x100000, 0x080000, CRC(8644518f) SHA1(570141deeb796cfae57600d5a518d34bb6dc14d0) )
ROM_LOAD16_BYTE( "rom1.bin", 0x100001, 0x080000, CRC(8e339897) SHA1(80e84c291f287c0783bddfcb1b7ebf78c154cadc) )
ROM_REGION( 0x40000, "oki", 0 ) /* ADPCM Samples */
ROM_LOAD( "rom13.bin", 0x00000, 0x40000, CRC(276146f5) SHA1(bf11d1f6782cefcad77d52af4f7e6054a8f93440) )
ROM_REGION( 0x1000, "plds", 0 ) /* Logic for mixing output of both GP9001 GFX controllers */
ROM_LOAD( "tp030_u19_gal16v8b-15.bin", 0x0000, 0x117, CRC(f71669e8) SHA1(ec1fbe04605fee864af4b01f001af227938c9f21) )
// ROM_LOAD( "tp030_u19_gal16v8b-15.jed", 0x0000, 0x991, CRC(31be54a2) SHA1(06278942a9a2ea858c0352b2ef5a65bf329b7b82) )
ROM_END
ROM_START( batsugunsp )
ROM_REGION( 0x080000, "maincpu", 0 ) /* Main 68K code */
ROM_LOAD16_WORD_SWAP( "tp030-sp.u69", 0x000000, 0x080000, CRC(8072a0cd) SHA1(3a0a9cdf894926a16800c4882a2b00383d981367) )
/* Secondary CPU is a Toaplan marked chip, (TS-007-Spy TOA PLAN) */
/* It's a NEC V25 (PLCC94) (program uploaded by main CPU) */
ROM_REGION( 0x400000, "gp9001", 0 )
ROM_LOAD( "tp030_3l.bin", 0x000000, 0x100000, CRC(3024b793) SHA1(e161db940f069279356fca2c5bf2753f07773705) )
ROM_LOAD( "tp030_3h.bin", 0x100000, 0x100000, CRC(ed75730b) SHA1(341f0f728144a049486d996c9bb14078578c6879) )
ROM_LOAD( "tp030_4l.bin", 0x200000, 0x100000, CRC(fedb9861) SHA1(4b0917056bd359b21935358c6bcc729262be6417) )
ROM_LOAD( "tp030_4h.bin", 0x300000, 0x100000, CRC(d482948b) SHA1(31be7dc5cff072403b783bf203b9805ffcad7284) )
ROM_REGION( 0x200000, "gp9001_1", 0 )
ROM_LOAD( "tp030_5.bin", 0x000000, 0x100000, CRC(bcf5ba05) SHA1(40f98888a29cdd30cda5dfb60fdc667c69b0fdb0) )
ROM_LOAD( "tp030_6.bin", 0x100000, 0x100000, CRC(0666fecd) SHA1(aa8f921fc51590b5b05bbe0b0ad0cce5ff359c64) )
ROM_REGION( 0x40000, "oki", 0 ) /* ADPCM Samples */
ROM_LOAD( "tp030_2.bin", 0x00000, 0x40000, CRC(276146f5) SHA1(bf11d1f6782cefcad77d52af4f7e6054a8f93440) )
ROM_REGION( 0x1000, "plds", 0 ) /* Logic for mixing output of both GP9001 GFX controllers */
ROM_LOAD( "tp030_u19_gal16v8b-15.bin", 0x0000, 0x117, CRC(f71669e8) SHA1(ec1fbe04605fee864af4b01f001af227938c9f21) )
ROM_END
ROM_START( pwrkick )
ROM_REGION( 0x80000, "maincpu", ROMREGION_ERASE00 )
ROM_LOAD16_WORD_SWAP( "1.u61", 0x000000, 0x080000, CRC(118b5899) SHA1(7a1637a63eb17e3892d79aede5730013a1dc00f9) )
ROM_REGION( 0x100000, "gp9001", ROMREGION_ERASE00 )
ROM_LOAD( "2.u26", 0x000000, 0x080000, CRC(a190eaea) SHA1(2c7b8c8026873e0f591fbcbc2e72b196ef84e162) )
ROM_LOAD( "3.u27", 0x080000, 0x080000, CRC(0b81e038) SHA1(8376617ae519a8ef604f20b26e941aa5b8066602) )
ROM_REGION( 0x80000, "oki", ROMREGION_ERASE00 )
ROM_LOAD( "4.u33", 0x000000, 0x080000, CRC(3ab742f1) SHA1(ce8ca02ca57fd77872e421ce601afd017d3518a0) )
ROM_END
ROM_START( othldrby )
ROM_REGION( 0x080000, "maincpu", 0 )
ROM_LOAD16_WORD_SWAP( "db0.1", 0x00000, 0x80000, CRC(6b4008d3) SHA1(4cf838c47563ba482be8364b2e115569a4a06c83) )
ROM_REGION( 0x400000, "gp9001", 0 )
ROM_LOAD( "db0-r2", 0x000000, 0x200000, CRC(4efff265) SHA1(4cd239ff42f532495946cb52bd1fee412f84e192) )
ROM_LOAD( "db0-r3", 0x200000, 0x200000, CRC(5c142b38) SHA1(5466a8b061a0f2545493de0f96fd4387beea276a) )
ROM_REGION( 0x080000, "oki", 0 ) /* OKIM6295 samples */
ROM_LOAD( "db0.4", 0x00000, 0x80000, CRC(a9701868) SHA1(9ee89556666d358e8d3915622573b3ba660048b8) )
ROM_END
ROM_START( snowbro2 )
ROM_REGION( 0x080000, "maincpu", 0 ) /* Main 68K code */
ROM_LOAD16_WORD_SWAP( "pro-4", 0x000000, 0x080000, CRC(4c7ee341) SHA1(ad46c605a38565d0148daac301be4e4b72302fe7) )
ROM_REGION( 0x300000, "gp9001", 0 )
ROM_LOAD( "rom2-l", 0x000000, 0x100000, CRC(e9d366a9) SHA1(e87e3966fce3395324b90db6c134b3345104c04b) )
ROM_LOAD( "rom2-h", 0x100000, 0x080000, CRC(9aab7a62) SHA1(611f6a15fdbac5d3063426a365538c1482e996bf) )
ROM_LOAD( "rom3-l", 0x180000, 0x100000, CRC(eb06e332) SHA1(7cd597bfffc153d178530c0f0903bebd751c9dd1) )
ROM_LOAD( "rom3-h", 0x280000, 0x080000, CRC(df4a952a) SHA1(b76af61c8437caca573ff1312832898666a611aa) )
ROM_REGION( 0x80000, "oki", 0 ) /* ADPCM Samples */
ROM_LOAD( "rom4", 0x00000, 0x80000, CRC(638f341e) SHA1(aa3fca25f099339ece1878ea730c5e9f18ec4823) )
ROM_END
ROM_START( snowbro2b ) // seems to be the same data as the main set, but with the extra user1 rom and different rom layout
ROM_REGION( 0x080000, "maincpu", 0 ) /* Main 68K code - difference with main set is year changed from 1994 to 1998 and upper FFFF fill changed to 00FF fill */
ROM_LOAD16_BYTE( "sb2-prg1.u39", 0x000000, 0x040000, CRC(e1fec8a2) SHA1(30c1a351070d784da9ba0dca68be8a262dba2045) )
ROM_LOAD16_BYTE( "sb2-prg0.u23", 0x000001, 0x040000, CRC(b473cd57) SHA1(331130faa9de01b3ca93845174e8c3684bd269c7) )
ROM_REGION( 0x400000, "gp9001", 0 )
ROM_LOAD( "sb2-gfx.u177", 0x000000, 0x200000, CRC(ebeec910) SHA1(e179f393b98135caa8419b68cd979038ab47a413) )
ROM_LOAD( "sb2-gfx.u175", 0x200000, 0x200000, CRC(e349c75b) SHA1(7d40d00fc0e15a68c427fe94db410bb7cbe00117) )
ROM_REGION( 0x80000, "oki", 0 ) /* ADPCM Samples */
ROM_LOAD( "sb2-snd-4.u17", 0x00000, 0x80000, CRC(638f341e) SHA1(aa3fca25f099339ece1878ea730c5e9f18ec4823) )
ROM_REGION( 0x8000, "user1", 0 ) /* ??? Some sort of table - same as other bootleg boards */
ROM_LOAD( "sb2-unk.u100", 0x0000, 0x8000, CRC(456dd16e) SHA1(84779ee64d3ea33ba1ba4dee39b504a81c6811a1) )
ROM_END
/* -------------------------- Raizing games ------------------------- */
/*
For the two sets of Sorcer Striker (World) the only differences
are 2 bytes plus a corrected checksum for each set:
File Offset sstriker sstrikera
0x160 17 0B <-- Rom checksum value
0x161 79 6D <-- Rom checksum value
0x92C 18 0C <-- Index of copyright strings to display for Korea
0x92D 18 0C <-- Index of copyright strings to display for Korea
0C points to the strings "LICENSED TO UNITE TRADING" / "FOR KOREA".
18 points to a pair of empty strings.
Printed labels for the eproms look like:
RA-MA-01
01
RAIZING
Both English and Japanese sets use the same labels and numbers for the roms
even if the roms contain different code / data.
*/
ROM_START( sstriker )
ROM_REGION( 0x080000, "maincpu", 0 ) /* Main 68K code */
ROM_LOAD16_WORD_SWAP( "ra-ma_01_01.u65", 0x000000, 0x080000, CRC(708fd51d) SHA1(167186d4cf13af37ec0fa6a59c738c54dbbf3c7c) )
ROM_REGION( 0x10000, "audiocpu", 0 ) /* Sound Z80 code */
ROM_LOAD( "ra-ma-01_02.u66", 0x00000, 0x10000, CRC(eabfa46d) SHA1(402c99ebf88f9025f74f0a28ced22b7882a65eb3) )
ROM_REGION( 0x200000, "gp9001", 0 )
ROM_LOAD( "ra-ma01-rom2.u2", 0x000000, 0x100000, CRC(54e2bd95) SHA1(341359dd46152615675bb90e8a184216c8feebff) )
ROM_LOAD( "ra-ma01-rom3.u1", 0x100000, 0x100000, CRC(21cd378f) SHA1(e1695bccec949d18b1c03e9c42dca384554b0d7c) )
ROM_REGION( 0x008000, "text", 0 )
ROM_LOAD( "ra-ma-01_05.u81", 0x000000, 0x008000, CRC(88b58841) SHA1(1d16b538c11a291bd1f46a510bfbd6259b45a0b5) )
ROM_REGION( 0x40000, "oki", 0 ) /* ADPCM Samples */
ROM_LOAD( "ra-ma01-rom1.u57", 0x00000, 0x40000, CRC(6edb2ab8) SHA1(e3032e8eda2686f30df4b7a088c5a4d4d45782ed) )
ROM_END
ROM_START( sstrikera )
ROM_REGION( 0x080000, "maincpu", 0 ) /* Main 68K code */
ROM_LOAD16_WORD_SWAP( "ra-ma-01_01.u65", 0x000000, 0x080000, CRC(92259f84) SHA1(127e62e407d95efd360bfe2cac9577f326abf6ef) )
ROM_REGION( 0x10000, "audiocpu", 0 ) /* Sound Z80 code */
ROM_LOAD( "ra-ma-01_02.u66", 0x00000, 0x10000, CRC(eabfa46d) SHA1(402c99ebf88f9025f74f0a28ced22b7882a65eb3) )
ROM_REGION( 0x200000, "gp9001", 0 )
ROM_LOAD( "ra-ma01-rom2.u2", 0x000000, 0x100000, CRC(54e2bd95) SHA1(341359dd46152615675bb90e8a184216c8feebff) )
ROM_LOAD( "ra-ma01-rom3.u1", 0x100000, 0x100000, CRC(21cd378f) SHA1(e1695bccec949d18b1c03e9c42dca384554b0d7c) )
ROM_REGION( 0x008000, "text", 0 )
ROM_LOAD( "ra-ma-01_05.u81", 0x000000, 0x008000, CRC(88b58841) SHA1(1d16b538c11a291bd1f46a510bfbd6259b45a0b5) )
ROM_REGION( 0x40000, "oki", 0 ) /* ADPCM Samples */
ROM_LOAD( "ra-ma01-rom1.u57", 0x00000, 0x40000, CRC(6edb2ab8) SHA1(e3032e8eda2686f30df4b7a088c5a4d4d45782ed) )
ROM_END
ROM_START( mahoudai )
ROM_REGION( 0x080000, "maincpu", 0 ) /* Main 68K code */
ROM_LOAD16_WORD_SWAP( "ra_ma_01_01.u65", 0x000000, 0x080000, CRC(970ccc5c) SHA1(c87cab83bde0284e631f02e50068407fee81d941) )
ROM_REGION( 0x10000, "audiocpu", 0 ) /* Sound Z80 code */
ROM_LOAD( "ra-ma-01_02.u66", 0x00000, 0x10000, CRC(eabfa46d) SHA1(402c99ebf88f9025f74f0a28ced22b7882a65eb3) )
ROM_REGION( 0x200000, "gp9001", 0 )
ROM_LOAD( "ra-ma01-rom2.u2", 0x000000, 0x100000, CRC(54e2bd95) SHA1(341359dd46152615675bb90e8a184216c8feebff) )
ROM_LOAD( "ra-ma01-rom3.u1", 0x100000, 0x100000, CRC(21cd378f) SHA1(e1695bccec949d18b1c03e9c42dca384554b0d7c) )
ROM_REGION( 0x008000, "text", 0 )
ROM_LOAD( "ra_ma_01_05.u81", 0x000000, 0x008000, CRC(c00d1e80) SHA1(53e64c4c0c6309130b37597d13b44a9e95b717d8) )
ROM_REGION( 0x40000, "oki", 0 ) /* ADPCM Samples */
ROM_LOAD( "ra-ma01-rom1.u57", 0x00000, 0x40000, CRC(6edb2ab8) SHA1(e3032e8eda2686f30df4b7a088c5a4d4d45782ed) )
ROM_END
ROM_START( kingdmgp )
ROM_REGION( 0x100000, "maincpu", 0 ) /* Main 68K code */
ROM_LOAD16_BYTE( "ma02rom1.bin", 0x000000, 0x080000, CRC(a678b149) SHA1(8c1a631e023dbba0a3fa6cd1b7d10dec1663213a) )
ROM_LOAD16_BYTE( "ma02rom0.bin", 0x000001, 0x080000, CRC(f226a212) SHA1(526acf3d05fdc88054a772fbea3de2af532bf3d2) )
ROM_REGION( 0x10000, "audiocpu", 0 ) /* Sound Z80 code */
ROM_LOAD( "ma02rom2.bin", 0x00000, 0x10000, CRC(dde8a57e) SHA1(f522a3f17e229c71512464349760a9e27778bf6a) )
ROM_REGION( 0x400000, "gp9001", 0 )
ROM_LOAD( "ma02rom3.bin", 0x000000, 0x200000, CRC(0e797142) SHA1(a480ccd151e49b886d3175a6deff56e1f2c26c3e) )
ROM_LOAD( "ma02rom4.bin", 0x200000, 0x200000, CRC(72a6fa53) SHA1(ce92e65205b84361cfb90305a61e9541b5c4dc2f) )
ROM_REGION( 0x008000, "text", 0 )
ROM_LOAD( "ma02rom5.eng", 0x000000, 0x008000, CRC(8c28460b) SHA1(0aed170762f6044896a7e608df60bbd37c583a71) )
ROM_REGION( 0x80000, "oki", 0 ) /* ADPCM Samples */
ROM_LOAD( "ma02rom6.bin", 0x00000, 0x80000, CRC(199e7cae) SHA1(0f5e13cc8ec42c80bb4bbff90aba29cdb15213d4) )
ROM_END
ROM_START( shippumd )
ROM_REGION( 0x100000, "maincpu", 0 ) /* Main 68K code */
ROM_LOAD16_BYTE( "ma02rom1.bin", 0x000000, 0x080000, CRC(a678b149) SHA1(8c1a631e023dbba0a3fa6cd1b7d10dec1663213a) )
ROM_LOAD16_BYTE( "ma02rom0.bin", 0x000001, 0x080000, CRC(f226a212) SHA1(526acf3d05fdc88054a772fbea3de2af532bf3d2) )
ROM_REGION( 0x10000, "audiocpu", 0 ) /* Sound Z80 code */
ROM_LOAD( "ma02rom2.bin", 0x00000, 0x10000, CRC(dde8a57e) SHA1(f522a3f17e229c71512464349760a9e27778bf6a) )
ROM_REGION( 0x400000, "gp9001", 0 )
ROM_LOAD( "ma02rom3.bin", 0x000000, 0x200000, CRC(0e797142) SHA1(a480ccd151e49b886d3175a6deff56e1f2c26c3e) )
ROM_LOAD( "ma02rom4.bin", 0x200000, 0x200000, CRC(72a6fa53) SHA1(ce92e65205b84361cfb90305a61e9541b5c4dc2f) )
ROM_REGION( 0x008000, "text", 0 )
ROM_LOAD( "ma02rom5.bin", 0x000000, 0x008000, CRC(116ae559) SHA1(4cc2d2a23cc0aefd457111b7990e47184e79204c) )
ROM_REGION( 0x80000, "oki", 0 ) /* ADPCM Samples */
ROM_LOAD( "ma02rom6.bin", 0x00000, 0x80000, CRC(199e7cae) SHA1(0f5e13cc8ec42c80bb4bbff90aba29cdb15213d4) )
ROM_END
ROM_START( bgaregga )
ROM_REGION( 0x100000, "maincpu", 0 ) /* Main 68K code */
ROM_LOAD16_BYTE( "prg0.bin", 0x000000, 0x080000, CRC(f80c2fc2) SHA1(a9aac5c7f5439b6fe8d1b3db1fb02a27cc28fdf6) )
ROM_LOAD16_BYTE( "prg1.bin", 0x000001, 0x080000, CRC(2ccfdd1e) SHA1(7a9f11f851854f3f8389b9c3c0906ebb8dc28712) )
ROM_REGION( 0x20000, "audiocpu", 0 ) /* Sound Z80 code + bank */
ROM_LOAD( "snd.bin", 0x00000, 0x20000, CRC(68632952) SHA1(fb834db83157948e2b420b6051102a9c6ac3969b) )
ROM_REGION( 0x800000, "gp9001", 0 )
ROM_LOAD( "rom4.bin", 0x000000, 0x200000, CRC(b333d81f) SHA1(5481465f1304334fd55798be2f44324c57c2dbcb) )
ROM_LOAD( "rom3.bin", 0x200000, 0x200000, CRC(51b9ebfb) SHA1(30e0c326f5175aa436df8dba08f6f4e08130b92f) )
ROM_LOAD( "rom2.bin", 0x400000, 0x200000, CRC(b330e5e2) SHA1(5d48e9d56f99d093b6390e0af1609fd796df2d35) )
ROM_LOAD( "rom1.bin", 0x600000, 0x200000, CRC(7eafdd70) SHA1(7c8da8e86c3f9491719b1d7d5d285568d7614f38) )
ROM_REGION( 0x010000, "text", 0 )
ROM_LOAD( "text.u81", 0x00000, 0x08000, CRC(e67fd534) SHA1(987d0edffc2c243a13d4567319ea3d185eaadbf8) )
ROM_REGION( 0x140000, "oki", 0 ) /* ADPCM Samples */
ROM_LOAD( "rom5.bin", 0x040000, 0x100000, CRC(f6d49863) SHA1(3a3c354852adad06e8a051511abfab7606bce382) )
ROM_END
ROM_START( bgareggahk )
ROM_REGION( 0x100000, "maincpu", 0 ) /* Main 68K code */
ROM_LOAD16_BYTE( "prg_0.rom", 0x000000, 0x080000, CRC(26e0019e) SHA1(5197001f5d59246b137e19ed1952a8207b25d4c0) )
ROM_LOAD16_BYTE( "prg_1.rom", 0x000001, 0x080000, CRC(2ccfdd1e) SHA1(7a9f11f851854f3f8389b9c3c0906ebb8dc28712) )
ROM_REGION( 0x20000, "audiocpu", 0 ) /* Sound Z80 code + bank */
ROM_LOAD( "snd.bin", 0x00000, 0x20000, CRC(68632952) SHA1(fb834db83157948e2b420b6051102a9c6ac3969b) )
ROM_REGION( 0x800000, "gp9001", 0 )
ROM_LOAD( "rom4.bin", 0x000000, 0x200000, CRC(b333d81f) SHA1(5481465f1304334fd55798be2f44324c57c2dbcb) )
ROM_LOAD( "rom3.bin", 0x200000, 0x200000, CRC(51b9ebfb) SHA1(30e0c326f5175aa436df8dba08f6f4e08130b92f) )
ROM_LOAD( "rom2.bin", 0x400000, 0x200000, CRC(b330e5e2) SHA1(5d48e9d56f99d093b6390e0af1609fd796df2d35) )
ROM_LOAD( "rom1.bin", 0x600000, 0x200000, CRC(7eafdd70) SHA1(7c8da8e86c3f9491719b1d7d5d285568d7614f38) )
ROM_REGION( 0x010000, "text", 0 )
ROM_LOAD( "text.u81", 0x00000, 0x08000, CRC(e67fd534) SHA1(987d0edffc2c243a13d4567319ea3d185eaadbf8) )
ROM_REGION( 0x140000, "oki", 0 ) /* ADPCM Samples */
ROM_LOAD( "rom5.bin", 0x040000, 0x100000, CRC(f6d49863) SHA1(3a3c354852adad06e8a051511abfab7606bce382) )
ROM_END
ROM_START( bgareggatw )
ROM_REGION( 0x100000, "maincpu", 0 ) /* Main 68K code */
ROM_LOAD16_BYTE( "garegga_prg0.u123", 0x000000, 0x080000, CRC(235b7405) SHA1(a2434801df4231a6b48f6c63f47c202d25a89e79) )
ROM_LOAD16_BYTE( "garegga_prg1.u65", 0x000001, 0x080000, CRC(c29ccf6a) SHA1(38806e0b4ff852f4bfefd80c56ca23f71623e275) )
ROM_REGION( 0x20000, "audiocpu", 0 ) /* Sound Z80 code + bank */
ROM_LOAD( "snd.bin", 0x00000, 0x20000, CRC(68632952) SHA1(fb834db83157948e2b420b6051102a9c6ac3969b) )
ROM_REGION( 0x800000, "gp9001", 0 )
ROM_LOAD( "rom4.bin", 0x000000, 0x200000, CRC(b333d81f) SHA1(5481465f1304334fd55798be2f44324c57c2dbcb) )
ROM_LOAD( "rom3.bin", 0x200000, 0x200000, CRC(51b9ebfb) SHA1(30e0c326f5175aa436df8dba08f6f4e08130b92f) )
ROM_LOAD( "rom2.bin", 0x400000, 0x200000, CRC(b330e5e2) SHA1(5d48e9d56f99d093b6390e0af1609fd796df2d35) )
ROM_LOAD( "rom1.bin", 0x600000, 0x200000, CRC(7eafdd70) SHA1(7c8da8e86c3f9491719b1d7d5d285568d7614f38) )
ROM_REGION( 0x010000, "text", 0 )
ROM_LOAD( "text.u81", 0x00000, 0x08000, CRC(e67fd534) SHA1(987d0edffc2c243a13d4567319ea3d185eaadbf8) )
ROM_REGION( 0x140000, "oki", 0 ) /* ADPCM Samples */
ROM_LOAD( "rom5.bin", 0x040000, 0x100000, CRC(f6d49863) SHA1(3a3c354852adad06e8a051511abfab7606bce382) )
ROM_END
ROM_START( bgaregganv )
ROM_REGION( 0x100000, "maincpu", 0 ) /* Main 68K code */
ROM_LOAD16_BYTE( "prg_0.bin", 0x000000, 0x080000, CRC(951ecc07) SHA1(a82e4b59e4a974566e59f3ab2fbae1aec7d88a2b) )
ROM_LOAD16_BYTE( "prg_1.bin", 0x000001, 0x080000, CRC(729a60c6) SHA1(cb6f5d138bb82c32910f42d8ee16fa573a23cef3) )
ROM_REGION( 0x20000, "audiocpu", 0 ) /* Sound Z80 code + bank */
ROM_LOAD( "snd.bin", 0x00000, 0x20000, CRC(68632952) SHA1(fb834db83157948e2b420b6051102a9c6ac3969b) )
ROM_REGION( 0x800000, "gp9001", 0 )
ROM_LOAD( "rom4.bin", 0x000000, 0x200000, CRC(b333d81f) SHA1(5481465f1304334fd55798be2f44324c57c2dbcb) )
ROM_LOAD( "rom3.bin", 0x200000, 0x200000, CRC(51b9ebfb) SHA1(30e0c326f5175aa436df8dba08f6f4e08130b92f) )
ROM_LOAD( "rom2.bin", 0x400000, 0x200000, CRC(b330e5e2) SHA1(5d48e9d56f99d093b6390e0af1609fd796df2d35) )
ROM_LOAD( "rom1.bin", 0x600000, 0x200000, CRC(7eafdd70) SHA1(7c8da8e86c3f9491719b1d7d5d285568d7614f38) )
ROM_REGION( 0x010000, "text", 0 )
ROM_LOAD( "text.u81", 0x00000, 0x08000, CRC(e67fd534) SHA1(987d0edffc2c243a13d4567319ea3d185eaadbf8) )
ROM_REGION( 0x140000, "oki", 0 ) /* ADPCM Samples */
ROM_LOAD( "rom5.bin", 0x040000, 0x100000, CRC(f6d49863) SHA1(3a3c354852adad06e8a051511abfab7606bce382) )
ROM_END
ROM_START( bgareggat2 )
ROM_REGION( 0x100000, "maincpu", 0 ) /* Main 68K code */
ROM_LOAD16_BYTE( "prg0", 0x000000, 0x080000, CRC(84094099) SHA1(49fc68a8bcdae4477e20eade9dd569de88b0b798) )
ROM_LOAD16_BYTE( "prg1", 0x000001, 0x080000, CRC(46f92fe4) SHA1(62a02cc1dbdc3ac362339aebb62368eb89b06bad) )
ROM_REGION( 0x20000, "audiocpu", 0 ) /* Sound Z80 code + bank */
ROM_LOAD( "snd.bin", 0x00000, 0x20000, CRC(68632952) SHA1(fb834db83157948e2b420b6051102a9c6ac3969b) )
ROM_REGION( 0x800000, "gp9001", 0 )
ROM_LOAD( "rom4.bin", 0x000000, 0x200000, CRC(b333d81f) SHA1(5481465f1304334fd55798be2f44324c57c2dbcb) )
ROM_LOAD( "rom3.bin", 0x200000, 0x200000, CRC(51b9ebfb) SHA1(30e0c326f5175aa436df8dba08f6f4e08130b92f) )
ROM_LOAD( "rom2.bin", 0x400000, 0x200000, CRC(b330e5e2) SHA1(5d48e9d56f99d093b6390e0af1609fd796df2d35) )
ROM_LOAD( "rom1.bin", 0x600000, 0x200000, CRC(7eafdd70) SHA1(7c8da8e86c3f9491719b1d7d5d285568d7614f38) )
ROM_REGION( 0x010000, "text", 0 )
ROM_LOAD( "text.u81", 0x00000, 0x08000, CRC(e67fd534) SHA1(987d0edffc2c243a13d4567319ea3d185eaadbf8) )
ROM_REGION( 0x140000, "oki", 0 ) /* ADPCM Samples */
ROM_LOAD( "rom5.bin", 0x040000, 0x100000, CRC(f6d49863) SHA1(3a3c354852adad06e8a051511abfab7606bce382) )
ROM_END
ROM_START( bgareggacn )
ROM_REGION( 0x100000, "maincpu", 0 ) /* Main 68K code */
ROM_LOAD16_BYTE( "u123", 0x000000, 0x080000, CRC(88a4e66a) SHA1(ca97e564eed0c5e028b937312e55da56400d5c8c) )
ROM_LOAD16_BYTE( "u65", 0x000001, 0x080000, CRC(5dea32a3) SHA1(59df6689e3eb5ea9e49a758604d21a64c65ca14d) )
ROM_REGION( 0x20000, "audiocpu", 0 ) /* Sound Z80 code + bank */
ROM_LOAD( "snd.bin", 0x00000, 0x20000, CRC(68632952) SHA1(fb834db83157948e2b420b6051102a9c6ac3969b) )
ROM_REGION( 0x800000, "gp9001", 0 )
ROM_LOAD( "rom4.bin", 0x000000, 0x200000, CRC(b333d81f) SHA1(5481465f1304334fd55798be2f44324c57c2dbcb) )
ROM_LOAD( "rom3.bin", 0x200000, 0x200000, CRC(51b9ebfb) SHA1(30e0c326f5175aa436df8dba08f6f4e08130b92f) )
ROM_LOAD( "rom2.bin", 0x400000, 0x200000, CRC(b330e5e2) SHA1(5d48e9d56f99d093b6390e0af1609fd796df2d35) )
ROM_LOAD( "rom1.bin", 0x600000, 0x200000, CRC(7eafdd70) SHA1(7c8da8e86c3f9491719b1d7d5d285568d7614f38) )
ROM_REGION( 0x010000, "text", 0 )
ROM_LOAD( "text.u81", 0x00000, 0x08000, CRC(e67fd534) SHA1(987d0edffc2c243a13d4567319ea3d185eaadbf8) )
ROM_REGION( 0x140000, "oki", 0 ) /* ADPCM Samples */
ROM_LOAD( "rom5.bin", 0x040000, 0x100000, CRC(f6d49863) SHA1(3a3c354852adad06e8a051511abfab7606bce382) )
ROM_END
ROM_START( bgareggabl )
ROM_REGION( 0x100000, "maincpu", 0 ) /* Main 68K code */
ROM_LOAD16_WORD_SWAP( "xt-8m.bin", 0x000000, 0x100000, CRC(4a6657cb) SHA1(1838956e7597eaa78ea5ee58d0ccc79cbbd7ded5) )
ROM_REGION( 0x20000, "audiocpu", 0 ) /* Sound Z80 code + bank */
ROM_LOAD( "snd.bin", 0x00000, 0x20000, CRC(68632952) SHA1(fb834db83157948e2b420b6051102a9c6ac3969b) )
ROM_REGION( 0x800000, "gp9001", 0 )
ROM_LOAD( "6#-322", 0x000000, 0x400000, CRC(37fe48ed) SHA1(ded5d13c33b4582310cdfb3dd52c052f741c00c5) ) /* == rom4.bin+rom3.bin */
ROM_LOAD( "5#-322", 0x400000, 0x400000, CRC(5a06c031) SHA1(ee241ff90117cec1f33ab163601a9d5c75609739) ) /* == rom2.bin+rom1.bin */
ROM_REGION( 0x010000, "text", 0 )
ROM_LOAD( "1#-256", 0x00000, 0x08000, CRC(760dcd14) SHA1(e151e5d7ca5557277f306b9484ec021f4edf1e07) )
ROM_REGION( 0x010000, "user1", 0 ) // not graphics
ROM_LOAD( "2#-256", 0x00000, 0x08000, CRC(456dd16e) SHA1(84779ee64d3ea33ba1ba4dee39b504a81c6811a1) )
ROM_REGION( 0x140000, "oki", 0 ) /* ADPCM Samples */
ROM_LOAD( "rom5.bin", 0x040000, 0x100000, CRC(f6d49863) SHA1(3a3c354852adad06e8a051511abfab7606bce382) )
ROM_END
ROM_START( bgareggabla )
ROM_REGION( 0x100000, "maincpu", 0 ) /* Main 68K code */
ROM_LOAD16_WORD_SWAP( "27c8100.mon-sys", 0x000000, 0x100000, CRC(d334e5aa) SHA1(41607b5630d7b92a96607ea95c5b55ad43745857) )
ROM_REGION( 0x20000, "audiocpu", 0 ) /* Sound Z80 code + bank */
ROM_LOAD( "snd.bin", 0x00000, 0x20000, CRC(68632952) SHA1(fb834db83157948e2b420b6051102a9c6ac3969b) )
ROM_REGION( 0x800000, "gp9001", 0 )
ROM_LOAD( "rom4.bin", 0x000000, 0x200000, CRC(b333d81f) SHA1(5481465f1304334fd55798be2f44324c57c2dbcb) )
ROM_LOAD( "rom3.bin", 0x200000, 0x200000, CRC(51b9ebfb) SHA1(30e0c326f5175aa436df8dba08f6f4e08130b92f) )
ROM_LOAD( "rom2.bin", 0x400000, 0x200000, CRC(b330e5e2) SHA1(5d48e9d56f99d093b6390e0af1609fd796df2d35) )
ROM_LOAD( "rom1.bin", 0x600000, 0x200000, CRC(7eafdd70) SHA1(7c8da8e86c3f9491719b1d7d5d285568d7614f38) )
ROM_REGION( 0x010000, "text", 0 )
ROM_LOAD( "text.bin", 0x00000, 0x08000, CRC(00d100bd) SHA1(fb6028e3519d6588a966d1b16d47453db2e51fd7))
ROM_REGION( 0x010000, "user1", 0 ) // not graphics
ROM_LOAD( "base.bin", 0x00000, 0x08000, CRC(456dd16e) SHA1(84779ee64d3ea33ba1ba4dee39b504a81c6811a1) )
ROM_REGION( 0x140000, "oki", 0 ) /* ADPCM Samples */
ROM_LOAD( "rom5.bin", 0x040000, 0x100000, CRC(f6d49863) SHA1(3a3c354852adad06e8a051511abfab7606bce382) )
ROM_END
/*
The region of Batrider is controlled by the first byte of rom prg0.u22
only sets which have been dumped from original PCBs are supported
original ROM labels have no indication of the region.
valid values are:
( * denotes that this set has been found on an original PCB )
00 : Nippon *
01 : USA *
02 : Europe *
03 : Asia
04 : German (sic)
05 : Austria
06 : Belgium
07 : Denmark
08 : Finland
09 : France
0A : Great Britain
0B : Greece
0C : The Netherlands
0D : Italy
0E : Norway
0F : Portugal
10 : Spain
11 : Sweden
12 : Switzerland
13 : Australia
14 : New Zealand
15 : Taiwan
16 : Hong Kong
17 : Korea *
18 : China *
19 : No Region?
1A+: Invalid
For future reference, that would mean the following
ROM_LOAD16_BYTE( "prg0_nippon.u22", 0x000000, 0x080000, CRC(4f3fc729) SHA1(b32d51c254741b82171a86c271679522a7aefd34) )
ROM_LOAD16_BYTE( "prg0_usa.u22", 0x000000, 0x080000, CRC(2049d007) SHA1(f2a43547a6fc5083b03c1d59a85abbf6e1ce4cd9) )
ROM_LOAD16_BYTE( "prg0_europe.u22", 0x000000, 0x080000, CRC(91d3e975) SHA1(682885fc17f2424d475c282f239f42faf1aae076) )
ROM_LOAD16_BYTE( "prg0_asia.u22", 0x000000, 0x080000, CRC(fea5fe5b) SHA1(0008336ecd3886485ab1d9678880b1a0bc788f40) )
ROM_LOAD16_BYTE( "prg0_german.u22", 0x000000, 0x080000, CRC(29969dd0) SHA1(eb8ad84b772508b6befb35afb11a0d6193c6a060) )
ROM_LOAD16_BYTE( "prg0_austria.u22", 0x000000, 0x080000, CRC(46e08afe) SHA1(a6f46581d0f7285704fbf1ac57476c96f4dcbec2) )
ROM_LOAD16_BYTE( "prg0_belgium.u22", 0x000000, 0x080000, CRC(f77ab38c) SHA1(8be87175250345d3e31d95ec204805071eae81f6) )
ROM_LOAD16_BYTE( "prg0_denmark.u22", 0x000000, 0x080000, CRC(980ca4a2) SHA1(4f29eaa5ba6b94d96c527f80188657abc8f4dcd0) )
ROM_LOAD16_BYTE( "prg0_finland.u22", 0x000000, 0x080000, CRC(826d72db) SHA1(be4bca0143f43c13361fd56974eb9b1ce7bd1740) )
ROM_LOAD16_BYTE( "prg0_france.u22", 0x000000, 0x080000, CRC(ed1b65f5) SHA1(1e08957c0f7ed65695fb1ceb961ab765f8a97c89) )
ROM_LOAD16_BYTE( "prg0_greatbritain.u22", 0x000000, 0x080000, CRC(5c815c87) SHA1(dea89944cd9a3fa6991b214495dc7123a505d39b) )
ROM_LOAD16_BYTE( "prg0_greece.u22", 0x000000, 0x080000, CRC(33f74ba9) SHA1(fe770415584b037152b37a75fe468d3c52dcb3cd) )
ROM_LOAD16_BYTE( "prg0_netherlands.u22", 0x000000, 0x080000, CRC(e4c42822) SHA1(8bfd286c42d7f2b3c88757b9a8b818be90b73f48) )
ROM_LOAD16_BYTE( "prg0_italy.u22", 0x000000, 0x080000, CRC(8bb23f0c) SHA1(b448bba312a8d583a981f6633cbc14af99fdbb06) )
ROM_LOAD16_BYTE( "prg0_norway.u22", 0x000000, 0x080000, CRC(3a28067e) SHA1(9435e6ce90b8d740a545469e6edb35d1af11ceab) )
ROM_LOAD16_BYTE( "prg0_portugal.u22", 0x000000, 0x080000, CRC(555e1150) SHA1(5c9ae898244a23a4184f9613f42d9aa9530468b9) )
ROM_LOAD16_BYTE( "prg0_spain.u22", 0x000000, 0x080000, CRC(0eebaa8c) SHA1(e305e90434e7f322a33e42a642362f770d3eb0e5) )
ROM_LOAD16_BYTE( "prg0_sweden.u22", 0x000000, 0x080000, CRC(619dbda2) SHA1(9e88ba104a5cffcced3b93ca711487a82b0fddde) )
ROM_LOAD16_BYTE( "prg0_switzerland.u22", 0x000000, 0x080000, CRC(d00784d0) SHA1(0b809414ce910684ca39216086f7d26fd2adeded) )
ROM_LOAD16_BYTE( "prg0_australia.u22", 0x000000, 0x080000, CRC(bf7193fe) SHA1(9af50fffc6ef23e300bf7b5e90b0dee6e4f4ad05) )
ROM_LOAD16_BYTE( "prg0_newzealand.u22", 0x000000, 0x080000, CRC(6842f075) SHA1(125b303c064d2f0b539ecadcb205756e7fd1334e) )
ROM_LOAD16_BYTE( "prg0_taiwan.u22", 0x000000, 0x080000, CRC(0734e75b) SHA1(17a8fb4f8fda3c234ed976490193ba308cac08fe) )
ROM_LOAD16_BYTE( "prg0_hongkong.u22", 0x000000, 0x080000, CRC(b6aede29) SHA1(580f29db6a2c2cea43966413778362694992a675) )
ROM_LOAD16_BYTE( "prg0_korea.u22", 0x000000, 0x080000, CRC(d9d8c907) SHA1(69c197f2a41f288913f042de9eb8274c0df3ac27) )
ROM_LOAD16_BYTE( "prg0_china.u22", 0x000000, 0x080000, CRC(c3b91f7e) SHA1(6b2376c37808dccda296d90ccd7f577ccff4e4dc) )
ROM_LOAD16_BYTE( "prg0_none.u22", 0x000000, 0x080000, CRC(accf0850) SHA1(d93e4e80443a40c3a9575dbf21927ef0d1a039b9) )
*/
ROM_START( batrider )
ROM_REGION( 0x200000, "maincpu", 0 ) /* Main 68k code */
ROM_LOAD16_BYTE( "prg0_europe.u22", 0x000000, 0x080000, CRC(91d3e975) SHA1(682885fc17f2424d475c282f239f42faf1aae076) )
ROM_LOAD16_BYTE( "prg1b.u23", 0x000001, 0x080000, CRC(8e70b492) SHA1(f84f2039826ae815afb058d71c1dbd190f9d524d) )
ROM_LOAD16_BYTE( "prg2.u21" , 0x100000, 0x080000, CRC(bdaa5fbf) SHA1(abd72ac633c0c8e7b4b1d7902c0d6e014ba995fe) )
ROM_LOAD16_BYTE( "prg3.u24" , 0x100001, 0x080000, CRC(7aa9f941) SHA1(99bdbad7a96d461073b06a53c50fc57c2fd6fc6d) )
ROM_REGION( 0x40000, "audiocpu", 0 ) /* Sound Z80 code + bank */
ROM_LOAD( "snd.u77", 0x00000, 0x40000, CRC(56682696) SHA1(a372450d9a6d535123dfc31d8116074b168ab646) )
ROM_REGION( 0x1000000, "gp9001", 0 )
ROM_LOAD( "rom-1.bin", 0x000000, 0x400000, CRC(0df69ca2) SHA1(49670347ebd7e1067ff988cf842b275b7ee7b5f7) )
ROM_LOAD( "rom-3.bin", 0x400000, 0x400000, CRC(60167d38) SHA1(fd2429808c59ef51fd5f5db84ea89a8dc504186e) )
ROM_LOAD( "rom-2.bin", 0x800000, 0x400000, CRC(1bfea593) SHA1(ce06dc3097ae56b0df56d104bbf7efc9b5d968d4) )
ROM_LOAD( "rom-4.bin", 0xc00000, 0x400000, CRC(bee03c94) SHA1(5bc1e6769c42857c03456426b502fcb86a114f19) )
ROM_REGION( 0x140000, "oki1", 0 ) /* ADPCM Samples 1 */
ROM_LOAD( "rom-5.bin", 0x040000, 0x100000, CRC(4274daf6) SHA1(85557b4707d529e5914f03c7a856864f5c24950e) )
ROM_REGION( 0x140000, "oki2", 0 ) /* ADPCM Samples 2 */
ROM_LOAD( "rom-6.bin", 0x040000, 0x100000, CRC(2a1c2426) SHA1(8abc3688ffc5ebb94b8d5118d4fa0908f07fe791) )
ROM_END
ROM_START( batrideru )
ROM_REGION( 0x200000, "maincpu", 0 ) /* Main 68k code */
ROM_LOAD16_BYTE( "prg0_usa.u22", 0x000000, 0x080000, CRC(2049d007) SHA1(f2a43547a6fc5083b03c1d59a85abbf6e1ce4cd9) )
ROM_LOAD16_BYTE( "prg1b.u23", 0x000001, 0x080000, CRC(8e70b492) SHA1(f84f2039826ae815afb058d71c1dbd190f9d524d) )
ROM_LOAD16_BYTE( "prg2.u21" , 0x100000, 0x080000, CRC(bdaa5fbf) SHA1(abd72ac633c0c8e7b4b1d7902c0d6e014ba995fe) )
ROM_LOAD16_BYTE( "prg3.u24" , 0x100001, 0x080000, CRC(7aa9f941) SHA1(99bdbad7a96d461073b06a53c50fc57c2fd6fc6d) )
ROM_REGION( 0x40000, "audiocpu", 0 ) /* Sound Z80 code + bank */
ROM_LOAD( "snd.u77", 0x00000, 0x40000, CRC(56682696) SHA1(a372450d9a6d535123dfc31d8116074b168ab646) )
ROM_REGION( 0x1000000, "gp9001", 0 )
ROM_LOAD( "rom-1.bin", 0x000000, 0x400000, CRC(0df69ca2) SHA1(49670347ebd7e1067ff988cf842b275b7ee7b5f7) )
ROM_LOAD( "rom-3.bin", 0x400000, 0x400000, CRC(60167d38) SHA1(fd2429808c59ef51fd5f5db84ea89a8dc504186e) )
ROM_LOAD( "rom-2.bin", 0x800000, 0x400000, CRC(1bfea593) SHA1(ce06dc3097ae56b0df56d104bbf7efc9b5d968d4) )
ROM_LOAD( "rom-4.bin", 0xc00000, 0x400000, CRC(bee03c94) SHA1(5bc1e6769c42857c03456426b502fcb86a114f19) )
ROM_REGION( 0x140000, "oki1", 0 ) /* ADPCM Samples 1 */
ROM_LOAD( "rom-5.bin", 0x040000, 0x100000, CRC(4274daf6) SHA1(85557b4707d529e5914f03c7a856864f5c24950e) )
ROM_REGION( 0x140000, "oki2", 0 ) /* ADPCM Samples 2 */
ROM_LOAD( "rom-6.bin", 0x040000, 0x100000, CRC(2a1c2426) SHA1(8abc3688ffc5ebb94b8d5118d4fa0908f07fe791) )
ROM_END
ROM_START( batriderc )
ROM_REGION( 0x200000, "maincpu", 0 ) /* Main 68k code */
ROM_LOAD16_BYTE( "prg0_china.u22", 0x000000, 0x080000, CRC(c3b91f7e) SHA1(6b2376c37808dccda296d90ccd7f577ccff4e4dc) )
ROM_LOAD16_BYTE( "prg1b.u23", 0x000001, 0x080000, CRC(8e70b492) SHA1(f84f2039826ae815afb058d71c1dbd190f9d524d) )
ROM_LOAD16_BYTE( "prg2.u21" , 0x100000, 0x080000, CRC(bdaa5fbf) SHA1(abd72ac633c0c8e7b4b1d7902c0d6e014ba995fe) )
ROM_LOAD16_BYTE( "prg3.u24" , 0x100001, 0x080000, CRC(7aa9f941) SHA1(99bdbad7a96d461073b06a53c50fc57c2fd6fc6d) )
ROM_REGION( 0x40000, "audiocpu", 0 ) /* Sound Z80 code + bank */
ROM_LOAD( "snd.u77", 0x00000, 0x40000, CRC(56682696) SHA1(a372450d9a6d535123dfc31d8116074b168ab646) )
ROM_REGION( 0x1000000, "gp9001", 0 )
ROM_LOAD( "rom-1.bin", 0x000000, 0x400000, CRC(0df69ca2) SHA1(49670347ebd7e1067ff988cf842b275b7ee7b5f7) )
ROM_LOAD( "rom-3.bin", 0x400000, 0x400000, CRC(60167d38) SHA1(fd2429808c59ef51fd5f5db84ea89a8dc504186e) )
ROM_LOAD( "rom-2.bin", 0x800000, 0x400000, CRC(1bfea593) SHA1(ce06dc3097ae56b0df56d104bbf7efc9b5d968d4) )
ROM_LOAD( "rom-4.bin", 0xc00000, 0x400000, CRC(bee03c94) SHA1(5bc1e6769c42857c03456426b502fcb86a114f19) )
ROM_REGION( 0x140000, "oki1", 0 ) /* ADPCM Samples 1 */
ROM_LOAD( "rom-5.bin", 0x040000, 0x100000, CRC(4274daf6) SHA1(85557b4707d529e5914f03c7a856864f5c24950e) )
ROM_REGION( 0x140000, "oki2", 0 ) /* ADPCM Samples 2 */
ROM_LOAD( "rom-6.bin", 0x040000, 0x100000, CRC(2a1c2426) SHA1(8abc3688ffc5ebb94b8d5118d4fa0908f07fe791) )
ROM_END
ROM_START( batriderj )
ROM_REGION( 0x200000, "maincpu", 0 ) /* Main 68k code */
ROM_LOAD16_BYTE( "prg0b.u22", 0x000000, 0x080000, CRC(4f3fc729) SHA1(b32d51c254741b82171a86c271679522a7aefd34) )
ROM_LOAD16_BYTE( "prg1b.u23", 0x000001, 0x080000, CRC(8e70b492) SHA1(f84f2039826ae815afb058d71c1dbd190f9d524d) )
ROM_LOAD16_BYTE( "prg2.u21" , 0x100000, 0x080000, CRC(bdaa5fbf) SHA1(abd72ac633c0c8e7b4b1d7902c0d6e014ba995fe) )
ROM_LOAD16_BYTE( "prg3.u24" , 0x100001, 0x080000, CRC(7aa9f941) SHA1(99bdbad7a96d461073b06a53c50fc57c2fd6fc6d) )
ROM_REGION( 0x40000, "audiocpu", 0 ) /* Sound Z80 code + bank */
ROM_LOAD( "snd.u77", 0x00000, 0x40000, CRC(56682696) SHA1(a372450d9a6d535123dfc31d8116074b168ab646) )
ROM_REGION( 0x1000000, "gp9001", 0 )
ROM_LOAD( "rom-1.bin", 0x000000, 0x400000, CRC(0df69ca2) SHA1(49670347ebd7e1067ff988cf842b275b7ee7b5f7) )
ROM_LOAD( "rom-3.bin", 0x400000, 0x400000, CRC(60167d38) SHA1(fd2429808c59ef51fd5f5db84ea89a8dc504186e) )
ROM_LOAD( "rom-2.bin", 0x800000, 0x400000, CRC(1bfea593) SHA1(ce06dc3097ae56b0df56d104bbf7efc9b5d968d4) )
ROM_LOAD( "rom-4.bin", 0xc00000, 0x400000, CRC(bee03c94) SHA1(5bc1e6769c42857c03456426b502fcb86a114f19) )
ROM_REGION( 0x140000, "oki1", 0 ) /* ADPCM Samples 1 */
ROM_LOAD( "rom-5.bin", 0x040000, 0x100000, CRC(4274daf6) SHA1(85557b4707d529e5914f03c7a856864f5c24950e) )
ROM_REGION( 0x140000, "oki2", 0 ) /* ADPCM Samples 2 */
ROM_LOAD( "rom-6.bin", 0x040000, 0x100000, CRC(2a1c2426) SHA1(8abc3688ffc5ebb94b8d5118d4fa0908f07fe791) )
ROM_END
ROM_START( batriderk )
ROM_REGION( 0x200000, "maincpu", 0 ) /* Main 68k code */
ROM_LOAD16_BYTE( "prg0_korea.u22", 0x000000, 0x080000, CRC(d9d8c907) SHA1(69c197f2a41f288913f042de9eb8274c0df3ac27) )
ROM_LOAD16_BYTE( "prg1b.u23", 0x000001, 0x080000, CRC(8e70b492) SHA1(f84f2039826ae815afb058d71c1dbd190f9d524d) )
ROM_LOAD16_BYTE( "prg2.u21" , 0x100000, 0x080000, CRC(bdaa5fbf) SHA1(abd72ac633c0c8e7b4b1d7902c0d6e014ba995fe) )
ROM_LOAD16_BYTE( "prg3.u24" , 0x100001, 0x080000, CRC(7aa9f941) SHA1(99bdbad7a96d461073b06a53c50fc57c2fd6fc6d) )
ROM_REGION( 0x40000, "audiocpu", 0 ) /* Sound Z80 code + bank */
ROM_LOAD( "snd.u77", 0x00000, 0x40000, CRC(56682696) SHA1(a372450d9a6d535123dfc31d8116074b168ab646) )
ROM_REGION( 0x1000000, "gp9001", 0 )
ROM_LOAD( "rom-1.bin", 0x000000, 0x400000, CRC(0df69ca2) SHA1(49670347ebd7e1067ff988cf842b275b7ee7b5f7) )
ROM_LOAD( "rom-3.bin", 0x400000, 0x400000, CRC(60167d38) SHA1(fd2429808c59ef51fd5f5db84ea89a8dc504186e) )
ROM_LOAD( "rom-2.bin", 0x800000, 0x400000, CRC(1bfea593) SHA1(ce06dc3097ae56b0df56d104bbf7efc9b5d968d4) )
ROM_LOAD( "rom-4.bin", 0xc00000, 0x400000, CRC(bee03c94) SHA1(5bc1e6769c42857c03456426b502fcb86a114f19) )
ROM_REGION( 0x140000, "oki1", 0 ) /* ADPCM Samples 1 */
ROM_LOAD( "rom-5.bin", 0x040000, 0x100000, CRC(4274daf6) SHA1(85557b4707d529e5914f03c7a856864f5c24950e) )
ROM_REGION( 0x140000, "oki2", 0 ) /* ADPCM Samples 2 */
ROM_LOAD( "rom-6.bin", 0x040000, 0x100000, CRC(2a1c2426) SHA1(8abc3688ffc5ebb94b8d5118d4fa0908f07fe791) )
ROM_END
/* older version, might have only been released in Japan, Hong Kong and Taiwan? */
ROM_START( batriderja )
ROM_REGION( 0x200000, "maincpu", 0 ) /* Main 68k code */
ROM_LOAD16_BYTE( "prg0.bin", 0x000000, 0x080000, CRC(f93ea27c) SHA1(41023c2ee1efd70b5aa9c70e1ddd9e5c3d51d68a) )
ROM_LOAD16_BYTE( "prg1.u23", 0x000001, 0x080000, CRC(8ae7f592) SHA1(8a20ebf85eca621f578d2302c3a3988647b077a7) )
ROM_LOAD16_BYTE( "prg2.u21", 0x100000, 0x080000, CRC(bdaa5fbf) SHA1(abd72ac633c0c8e7b4b1d7902c0d6e014ba995fe) )
ROM_LOAD16_BYTE( "prg3.u24", 0x100001, 0x080000, CRC(7aa9f941) SHA1(99bdbad7a96d461073b06a53c50fc57c2fd6fc6d) )
ROM_REGION( 0x40000, "audiocpu", 0 ) /* Sound Z80 code + bank */
ROM_LOAD( "snd.u77", 0x00000, 0x40000, CRC(56682696) SHA1(a372450d9a6d535123dfc31d8116074b168ab646) )
ROM_REGION( 0x1000000, "gp9001", 0 )
ROM_LOAD( "rom-1.bin", 0x000000, 0x400000, CRC(0df69ca2) SHA1(49670347ebd7e1067ff988cf842b275b7ee7b5f7) )
ROM_LOAD( "rom-3.bin", 0x400000, 0x400000, CRC(60167d38) SHA1(fd2429808c59ef51fd5f5db84ea89a8dc504186e) )
ROM_LOAD( "rom-2.bin", 0x800000, 0x400000, CRC(1bfea593) SHA1(ce06dc3097ae56b0df56d104bbf7efc9b5d968d4) )
ROM_LOAD( "rom-4.bin", 0xc00000, 0x400000, CRC(bee03c94) SHA1(5bc1e6769c42857c03456426b502fcb86a114f19) )
ROM_REGION( 0x140000, "oki1", 0 ) /* ADPCM Samples 1 */
ROM_LOAD( "rom-5.bin", 0x040000, 0x100000, CRC(4274daf6) SHA1(85557b4707d529e5914f03c7a856864f5c24950e) )
ROM_REGION( 0x140000, "oki2", 0 ) /* ADPCM Samples 2 */
ROM_LOAD( "rom-6.bin", 0x040000, 0x100000, CRC(2a1c2426) SHA1(8abc3688ffc5ebb94b8d5118d4fa0908f07fe791) )
ROM_END
ROM_START( batriderhk )
ROM_REGION( 0x200000, "maincpu", 0 ) /* Main 68k code */
ROM_LOAD16_BYTE( "prg0.u22", 0x000000, 0x080000, CRC(00afbb7c) SHA1(a4b6331e0fcab7d0c43fc43adb701f1248247b41) )
ROM_LOAD16_BYTE( "prg1.u23", 0x000001, 0x080000, CRC(8ae7f592) SHA1(8a20ebf85eca621f578d2302c3a3988647b077a7) )
ROM_LOAD16_BYTE( "prg2.u21", 0x100000, 0x080000, CRC(bdaa5fbf) SHA1(abd72ac633c0c8e7b4b1d7902c0d6e014ba995fe) )
ROM_LOAD16_BYTE( "prg3.u24", 0x100001, 0x080000, CRC(7aa9f941) SHA1(99bdbad7a96d461073b06a53c50fc57c2fd6fc6d) )
ROM_REGION( 0x40000, "audiocpu", 0 ) /* Sound Z80 code + bank */
ROM_LOAD( "snd.u77", 0x00000, 0x40000, CRC(56682696) SHA1(a372450d9a6d535123dfc31d8116074b168ab646) )
ROM_REGION( 0x1000000, "gp9001", 0 )
ROM_LOAD( "rom-1.bin", 0x000000, 0x400000, CRC(0df69ca2) SHA1(49670347ebd7e1067ff988cf842b275b7ee7b5f7) )
ROM_LOAD( "rom-3.bin", 0x400000, 0x400000, CRC(60167d38) SHA1(fd2429808c59ef51fd5f5db84ea89a8dc504186e) )
ROM_LOAD( "rom-2.bin", 0x800000, 0x400000, CRC(1bfea593) SHA1(ce06dc3097ae56b0df56d104bbf7efc9b5d968d4) )
ROM_LOAD( "rom-4.bin", 0xc00000, 0x400000, CRC(bee03c94) SHA1(5bc1e6769c42857c03456426b502fcb86a114f19) )
ROM_REGION( 0x140000, "oki1", 0 ) /* ADPCM Samples 1 */
ROM_LOAD( "rom-5.bin", 0x040000, 0x100000, CRC(4274daf6) SHA1(85557b4707d529e5914f03c7a856864f5c24950e) )
ROM_REGION( 0x140000, "oki2", 0 ) /* ADPCM Samples 2 */
ROM_LOAD( "rom-6.bin", 0x040000, 0x100000, CRC(2a1c2426) SHA1(8abc3688ffc5ebb94b8d5118d4fa0908f07fe791) )
ROM_END
ROM_START( batridert )
ROM_REGION( 0x200000, "maincpu", 0 ) /* Main 68k code */
ROM_LOAD16_BYTE( "u22.bin", 0x000000, 0x080000, CRC(b135820e) SHA1(c222887d18a0a3ea0fcc973b95b29d69c86f7ec3) )
ROM_LOAD16_BYTE( "prg1.u23", 0x000001, 0x080000, CRC(8ae7f592) SHA1(8a20ebf85eca621f578d2302c3a3988647b077a7) )
ROM_LOAD16_BYTE( "prg2.u21", 0x100000, 0x080000, CRC(bdaa5fbf) SHA1(abd72ac633c0c8e7b4b1d7902c0d6e014ba995fe) )
ROM_LOAD16_BYTE( "prg3.u24", 0x100001, 0x080000, CRC(7aa9f941) SHA1(99bdbad7a96d461073b06a53c50fc57c2fd6fc6d) )
ROM_REGION( 0x40000, "audiocpu", 0 ) /* Sound Z80 code + bank */
ROM_LOAD( "snd.u77", 0x00000, 0x40000, CRC(56682696) SHA1(a372450d9a6d535123dfc31d8116074b168ab646) )
ROM_REGION( 0x1000000, "gp9001", 0 )
ROM_LOAD( "rom-1.bin", 0x000000, 0x400000, CRC(0df69ca2) SHA1(49670347ebd7e1067ff988cf842b275b7ee7b5f7) )
ROM_LOAD( "rom-3.bin", 0x400000, 0x400000, CRC(60167d38) SHA1(fd2429808c59ef51fd5f5db84ea89a8dc504186e) )
ROM_LOAD( "rom-2.bin", 0x800000, 0x400000, CRC(1bfea593) SHA1(ce06dc3097ae56b0df56d104bbf7efc9b5d968d4) )
ROM_LOAD( "rom-4.bin", 0xc00000, 0x400000, CRC(bee03c94) SHA1(5bc1e6769c42857c03456426b502fcb86a114f19) )
ROM_REGION( 0x140000, "oki1", 0 ) /* ADPCM Samples 1 */
ROM_LOAD( "rom-5.bin", 0x040000, 0x100000, CRC(4274daf6) SHA1(85557b4707d529e5914f03c7a856864f5c24950e) )
ROM_REGION( 0x140000, "oki2", 0 ) /* ADPCM Samples 2 */
ROM_LOAD( "rom-6.bin", 0x040000, 0x100000, CRC(2a1c2426) SHA1(8abc3688ffc5ebb94b8d5118d4fa0908f07fe791) )
ROM_END
/*
Battle Bakraid
Raizing/8ing, 1999
PCB Layout
----------
ET68-V99
|-----------------------------------------------------|
|TA8201 16.93MHz ROM-6 6264 |
| YAC516 |
| YMZ280B-F ROM-7 SND_U0720 |
| |
| VOL ROM-8 Z80 |
| |
| 341256 |
| 93C66 |
| 341256 XILINX |
|J XC95108 |
|A 27MHz 32MHz |
|M |
|M DIPSW1 341256 341256|
|A XILINX XILINK |
| DIPSW2 XC95144 XC95108 341256 341256|
| |
| DIPSW3 |
| MACH211 PRG1_U023 |
| TEST_SW 68000 |
| PRG0_U022 |
| |
| PRG3_U024 |
| L7A0498 |
| GP9001 PRG2_U021 |
| ROM-0 ROM-1 (QFP208) |
| |
| 6264 MN414260 |
| ROM-2 ROM-3 |
| 6264 MN414260 |
|-----------------------------------------------------|
Notes:
ROM-0 to ROM-3 - 32M DIP42
ROM-6 to ROM-8 - 32M DIP42 Byte Mode
68000 clock - 16.000MHz (32/2)
Z80 clock - 5.33333MHz (32/6)
VSync - 60Hz
HSync - 15.39kHz
*/
ROM_START( bbakraid )
ROM_REGION( 0x200000, "maincpu", 0 ) /* Main 68k code */
ROM_LOAD16_BYTE( "prg0u022_usa.bin", 0x000000, 0x080000, CRC(95fb2ffd) SHA1(c7f502f3945249573b66226e8bacc6a9bc230693) )
ROM_LOAD16_BYTE( "prg1u023.new", 0x000001, 0x080000, CRC(4ae9aa64) SHA1(45fdf72141c4c9f24a38d4218c65874799b9c868) )
ROM_LOAD16_BYTE( "prg2u021.bin", 0x100000, 0x080000, CRC(ffba8656) SHA1(6526bb65fad3384de3f301a7d1095cbf03757433) )
ROM_LOAD16_BYTE( "prg3u024.bin", 0x100001, 0x080000, CRC(834b8ad6) SHA1(0dd6223bb0749819ad29811eeb04fd08d937abb0) )
ROM_REGION( 0x20000, "audiocpu", 0 ) /* Sound Z80 code */
ROM_LOAD( "sndu0720.bin", 0x00000, 0x20000, CRC(e62ab246) SHA1(00d23689dd423ecd4024c58b5903d16e890f1dff) )
ROM_REGION( 0x1000000, "gp9001", 0 )
ROM_LOAD( "gfxu0510.bin", 0x000000, 0x400000, CRC(9cca3446) SHA1(1123f8b8bfbe59a2c572cdf61f1ad27ff37f0f0d) )
ROM_LOAD( "gfxu0512.bin", 0x400000, 0x400000, CRC(a2a281d5) SHA1(d9a6623f9433ad682223f9780c26cd1523ebc5c5) )
ROM_LOAD( "gfxu0511.bin", 0x800000, 0x400000, CRC(e16472c0) SHA1(6068d679a8b3b65e05acd58a7ce9ead90177049f) )
ROM_LOAD( "gfxu0513.bin", 0xc00000, 0x400000, CRC(8bb635a0) SHA1(9064f1a2d8bb88ddbca702fb8556d0dfe6a5cadc) )
ROM_REGION( 0x0c00000, "ymz", 0 ) /* YMZ280B Samples */
ROM_LOAD( "rom6.829", 0x000000, 0x400000, CRC(8848b4a0) SHA1(e0dce136c5d5a4c1a92b863e57848cd5927d06f1) )
ROM_LOAD( "rom7.830", 0x400000, 0x400000, CRC(d6224267) SHA1(5c9b7b13effbef9f707811f84bfe50ca85e605e3) )
ROM_LOAD( "rom8.831", 0x800000, 0x400000, CRC(a101dfb0) SHA1(4b729b0d562e09df35438e9e6b457b8de2690a6e) )
ROM_REGION( 0x200, "eeprom", 0 )
ROM_LOAD( "eeprom-bbakraid-new.bin", 0x000, 0x200, CRC(35c9275a) SHA1(1282034adf3c7a24545fd273729867058dc93027) )
ROM_END
ROM_START( bbakraidc )
ROM_REGION( 0x200000, "maincpu", 0 ) /* Main 68k code */
ROM_LOAD16_BYTE( "prg0u022_china.bin", 0x000000, 0x080000, CRC(760be084) SHA1(096c8a2336492d7370ae25f3385faebf6e9c3eca) )
ROM_LOAD16_BYTE( "prg1u023.new", 0x000001, 0x080000, CRC(4ae9aa64) SHA1(45fdf72141c4c9f24a38d4218c65874799b9c868) )
ROM_LOAD16_BYTE( "prg2u021.bin", 0x100000, 0x080000, CRC(ffba8656) SHA1(6526bb65fad3384de3f301a7d1095cbf03757433) )
ROM_LOAD16_BYTE( "prg3u024.bin", 0x100001, 0x080000, CRC(834b8ad6) SHA1(0dd6223bb0749819ad29811eeb04fd08d937abb0) )
ROM_REGION( 0x20000, "audiocpu", 0 ) /* Sound Z80 code */
ROM_LOAD( "sndu0720.bin", 0x00000, 0x20000, CRC(e62ab246) SHA1(00d23689dd423ecd4024c58b5903d16e890f1dff) )
ROM_REGION( 0x1000000, "gp9001", 0 )
ROM_LOAD( "gfxu0510.bin", 0x000000, 0x400000, CRC(9cca3446) SHA1(1123f8b8bfbe59a2c572cdf61f1ad27ff37f0f0d) )
ROM_LOAD( "gfxu0512.bin", 0x400000, 0x400000, CRC(a2a281d5) SHA1(d9a6623f9433ad682223f9780c26cd1523ebc5c5) )
ROM_LOAD( "gfxu0511.bin", 0x800000, 0x400000, CRC(e16472c0) SHA1(6068d679a8b3b65e05acd58a7ce9ead90177049f) )
ROM_LOAD( "gfxu0513.bin", 0xc00000, 0x400000, CRC(8bb635a0) SHA1(9064f1a2d8bb88ddbca702fb8556d0dfe6a5cadc) )
ROM_REGION( 0x0c00000, "ymz", 0 ) /* YMZ280B Samples */
ROM_LOAD( "rom6.829", 0x000000, 0x400000, CRC(8848b4a0) SHA1(e0dce136c5d5a4c1a92b863e57848cd5927d06f1) )
ROM_LOAD( "rom7.830", 0x400000, 0x400000, CRC(d6224267) SHA1(5c9b7b13effbef9f707811f84bfe50ca85e605e3) )
ROM_LOAD( "rom8.831", 0x800000, 0x400000, CRC(a101dfb0) SHA1(4b729b0d562e09df35438e9e6b457b8de2690a6e) )
ROM_REGION( 0x200, "eeprom", 0 )
ROM_LOAD( "eeprom-bbakraid-new.bin", 0x000, 0x200, CRC(35c9275a) SHA1(1282034adf3c7a24545fd273729867058dc93027) )
ROM_END
ROM_START( bbakraidj )
ROM_REGION( 0x200000, "maincpu", 0 ) /* Main 68k code */
ROM_LOAD16_BYTE( "prg0u022.new", 0x000000, 0x080000, CRC(fa8d38d3) SHA1(aba91d87a8a62d3fe1139b4437b16e2f844264ad) )
ROM_LOAD16_BYTE( "prg1u023.new", 0x000001, 0x080000, CRC(4ae9aa64) SHA1(45fdf72141c4c9f24a38d4218c65874799b9c868) )
ROM_LOAD16_BYTE( "prg2u021.bin", 0x100000, 0x080000, CRC(ffba8656) SHA1(6526bb65fad3384de3f301a7d1095cbf03757433) )
ROM_LOAD16_BYTE( "prg3u024.bin", 0x100001, 0x080000, CRC(834b8ad6) SHA1(0dd6223bb0749819ad29811eeb04fd08d937abb0) )
ROM_REGION( 0x20000, "audiocpu", 0 ) /* Sound Z80 code */
ROM_LOAD( "sndu0720.bin", 0x00000, 0x20000, CRC(e62ab246) SHA1(00d23689dd423ecd4024c58b5903d16e890f1dff) )
ROM_REGION( 0x1000000, "gp9001", 0 )
ROM_LOAD( "gfxu0510.bin", 0x000000, 0x400000, CRC(9cca3446) SHA1(1123f8b8bfbe59a2c572cdf61f1ad27ff37f0f0d) )
ROM_LOAD( "gfxu0512.bin", 0x400000, 0x400000, CRC(a2a281d5) SHA1(d9a6623f9433ad682223f9780c26cd1523ebc5c5) )
ROM_LOAD( "gfxu0511.bin", 0x800000, 0x400000, CRC(e16472c0) SHA1(6068d679a8b3b65e05acd58a7ce9ead90177049f) )
ROM_LOAD( "gfxu0513.bin", 0xc00000, 0x400000, CRC(8bb635a0) SHA1(9064f1a2d8bb88ddbca702fb8556d0dfe6a5cadc) )
ROM_REGION( 0x0c00000, "ymz", 0 ) /* YMZ280B Samples */
ROM_LOAD( "rom6.829", 0x000000, 0x400000, CRC(8848b4a0) SHA1(e0dce136c5d5a4c1a92b863e57848cd5927d06f1) )
ROM_LOAD( "rom7.830", 0x400000, 0x400000, CRC(d6224267) SHA1(5c9b7b13effbef9f707811f84bfe50ca85e605e3) )
ROM_LOAD( "rom8.831", 0x800000, 0x400000, CRC(a101dfb0) SHA1(4b729b0d562e09df35438e9e6b457b8de2690a6e) )
ROM_REGION( 0x200, "eeprom", 0 )
ROM_LOAD( "eeprom-bbakraid-new.bin", 0x000, 0x200, CRC(35c9275a) SHA1(1282034adf3c7a24545fd273729867058dc93027) )
ROM_END
ROM_START( bbakraidja )
ROM_REGION( 0x200000, "maincpu", 0 ) /* Main 68k code */
ROM_LOAD16_BYTE( "prg0u022.bin", 0x000000, 0x080000, CRC(0dd59512) SHA1(c6a4e6aa49c6ac3b04ae62a0a4cc8084ae048381) )
ROM_LOAD16_BYTE( "prg1u023.bin", 0x000001, 0x080000, CRC(fecde223) SHA1(eb5ac0eda49b4b0f3d25d8a8bb356e77a453d3a7) )
ROM_LOAD16_BYTE( "prg2u021.bin", 0x100000, 0x080000, CRC(ffba8656) SHA1(6526bb65fad3384de3f301a7d1095cbf03757433) )
ROM_LOAD16_BYTE( "prg3u024.bin", 0x100001, 0x080000, CRC(834b8ad6) SHA1(0dd6223bb0749819ad29811eeb04fd08d937abb0) )
ROM_REGION( 0x20000, "audiocpu", 0 ) /* Sound Z80 code */
ROM_LOAD( "sndu0720.bin", 0x00000, 0x20000, CRC(e62ab246) SHA1(00d23689dd423ecd4024c58b5903d16e890f1dff) )
ROM_REGION( 0x1000000, "gp9001", 0 )
ROM_LOAD( "gfxu0510.bin", 0x000000, 0x400000, CRC(9cca3446) SHA1(1123f8b8bfbe59a2c572cdf61f1ad27ff37f0f0d) )
ROM_LOAD( "gfxu0512.bin", 0x400000, 0x400000, CRC(a2a281d5) SHA1(d9a6623f9433ad682223f9780c26cd1523ebc5c5) )
ROM_LOAD( "gfxu0511.bin", 0x800000, 0x400000, CRC(e16472c0) SHA1(6068d679a8b3b65e05acd58a7ce9ead90177049f) )
ROM_LOAD( "gfxu0513.bin", 0xc00000, 0x400000, CRC(8bb635a0) SHA1(9064f1a2d8bb88ddbca702fb8556d0dfe6a5cadc) )
ROM_REGION( 0x0c00000, "ymz", 0 ) /* YMZ280B Samples */
ROM_LOAD( "rom6.829", 0x000000, 0x400000, CRC(8848b4a0) SHA1(e0dce136c5d5a4c1a92b863e57848cd5927d06f1) )
ROM_LOAD( "rom7.830", 0x400000, 0x400000, CRC(d6224267) SHA1(5c9b7b13effbef9f707811f84bfe50ca85e605e3) )
ROM_LOAD( "rom8.831", 0x800000, 0x400000, CRC(a101dfb0) SHA1(4b729b0d562e09df35438e9e6b457b8de2690a6e) )
ROM_REGION( 0x200, "eeprom", 0 )
ROM_LOAD( "eeprom-bbakraid.bin", 0x000, 0x200, CRC(7f97d347) SHA1(3096c399019924dbb7d6673483f6a011f89467c6) )
ROM_END
// The following is in order of Toaplan Board/game numbers
// See list at top of file
// ( YEAR NAME PARENT MACHINE INPUT INIT MONITOR COMPANY FULLNAME FLAGS )
GAME( 1991, tekipaki, 0, tekipaki, tekipaki, driver_device, 0, ROT0, "Toaplan", "Teki Paki", MACHINE_NO_SOUND | MACHINE_SUPPORTS_SAVE )
GAME( 1991, ghox, 0, ghox, ghox, driver_device, 0, ROT270, "Toaplan", "Ghox (spinner)", MACHINE_NO_SOUND | MACHINE_SUPPORTS_SAVE )
GAME( 1991, ghoxj, ghox, ghox, ghox, driver_device, 0, ROT270, "Toaplan", "Ghox (joystick)", MACHINE_NO_SOUND | MACHINE_SUPPORTS_SAVE )
GAME( 1992, dogyuun, 0, dogyuun, dogyuun, toaplan2_state, dogyuun, ROT270, "Toaplan", "Dogyuun", MACHINE_SUPPORTS_SAVE )
GAME( 1992, dogyuuna, dogyuun, dogyuun, dogyuuna, toaplan2_state, dogyuun, ROT270, "Toaplan", "Dogyuun (older set)", MACHINE_SUPPORTS_SAVE )
GAME( 1992, dogyuunt, dogyuun, dogyuun, dogyuunt, toaplan2_state, dogyuun, ROT270, "Toaplan", "Dogyuun (location test)", MACHINE_SUPPORTS_SAVE )
GAME( 1993, kbash, 0, kbash, kbash, driver_device, 0, ROT0, "Toaplan / Atari", "Knuckle Bash", MACHINE_SUPPORTS_SAVE ) // Atari license shown for some regions.
GAME( 1993, kbashk, kbash, kbash, kbashk,driver_device, 0, ROT0, "Toaplan / Taito", "Knuckle Bash (Korean PCB)", MACHINE_SUPPORTS_SAVE ) // Japan region has optional Taito license, maybe the original Japan release?
GAME( 1999, kbash2, 0, kbash2, kbash2, driver_device, 0, ROT0, "bootleg", "Knuckle Bash 2 (bootleg)", MACHINE_SUPPORTS_SAVE )
GAME( 1992, truxton2, 0, truxton2, truxton2, driver_device, 0, ROT270, "Toaplan", "Truxton II / Tatsujin Oh", MACHINE_SUPPORTS_SAVE )
GAME( 1991, pipibibs, 0, pipibibs, pipibibs, driver_device, 0, ROT0, "Toaplan", "Pipi & Bibis / Whoopee!! (Z80 sound cpu, set 1)", MACHINE_SUPPORTS_SAVE )
GAME( 1991, pipibibsa, pipibibs, pipibibs, pipibibs, driver_device, 0, ROT0, "Toaplan", "Pipi & Bibis / Whoopee!! (Z80 sound cpu, set 2)", MACHINE_SUPPORTS_SAVE )
GAME( 1991, pipibibsp, pipibibs, pipibibs, pipibibsp, driver_device,0, ROT0, "Toaplan", "Pipi & Bibis / Whoopee!! (prototype)", MACHINE_SUPPORTS_SAVE )
GAME( 1991, whoopee, pipibibs, tekipaki, whoopee, driver_device, 0, ROT0, "Toaplan", "Pipi & Bibis / Whoopee!! (Teki Paki hardware)", MACHINE_NO_SOUND | MACHINE_SUPPORTS_SAVE ) // original Whoopee!! boards have a HD647180 instead of Z80
GAME( 1991, pipibibsbl, pipibibs, pipibibsbl, pipibibsbl, toaplan2_state, pipibibsbl, ROT0, "bootleg (Ryouta Kikaku)", "Pipi & Bibis / Whoopee!! (bootleg)", MACHINE_SUPPORTS_SAVE )
// region is in eeprom (and also requires correct return value from a v25 mapped address??)
GAME( 1992, fixeight, 0, fixeight, fixeight, toaplan2_state, fixeight, ROT270, "Toaplan", "FixEight (Europe)", MACHINE_SUPPORTS_SAVE )
GAME( 1992, fixeightk, fixeight, fixeight, fixeight, toaplan2_state, fixeight, ROT270, "Toaplan", "FixEight (Korea)", MACHINE_SUPPORTS_SAVE )
GAME( 1992, fixeighth, fixeight, fixeight, fixeight, toaplan2_state, fixeight, ROT270, "Toaplan", "FixEight (Hong Kong)", MACHINE_SUPPORTS_SAVE )
GAME( 1992, fixeighttw, fixeight, fixeight, fixeight, toaplan2_state, fixeight, ROT270, "Toaplan", "FixEight (Taiwan)", MACHINE_SUPPORTS_SAVE )
GAME( 1992, fixeighta, fixeight, fixeight, fixeight, toaplan2_state, fixeight, ROT270, "Toaplan", "FixEight (Southeast Asia)", MACHINE_SUPPORTS_SAVE )
GAME( 1992, fixeightu, fixeight, fixeight, fixeight, toaplan2_state, fixeight, ROT270, "Toaplan", "FixEight (USA)", MACHINE_SUPPORTS_SAVE )
GAME( 1992, fixeightj, fixeight, fixeight, fixeight, toaplan2_state, fixeight, ROT270, "Toaplan", "FixEight (Japan)", MACHINE_SUPPORTS_SAVE )
GAME( 1992, fixeightt, fixeight, fixeight, fixeight, toaplan2_state, fixeight, ROT270, "Toaplan (Taito license)", "FixEight (Europe, Taito license)", MACHINE_SUPPORTS_SAVE )
GAME( 1992, fixeightkt, fixeight, fixeight, fixeight, toaplan2_state, fixeight, ROT270, "Toaplan (Taito license)", "FixEight (Korea, Taito license)", MACHINE_SUPPORTS_SAVE )
GAME( 1992, fixeightht, fixeight, fixeight, fixeight, toaplan2_state, fixeight, ROT270, "Toaplan (Taito license)", "FixEight (Hong Kong, Taito license)", MACHINE_SUPPORTS_SAVE )
GAME( 1992, fixeighttwt,fixeight, fixeight, fixeight, toaplan2_state, fixeight, ROT270, "Toaplan (Taito license)", "FixEight (Taiwan, Taito license)", MACHINE_SUPPORTS_SAVE )
GAME( 1992, fixeightat, fixeight, fixeight, fixeight, toaplan2_state, fixeight, ROT270, "Toaplan (Taito license)", "FixEight (Southeast Asia, Taito license)", MACHINE_SUPPORTS_SAVE )
GAME( 1992, fixeightut, fixeight, fixeight, fixeight, toaplan2_state, fixeight, ROT270, "Toaplan (Taito license)", "FixEight (USA, Taito license)", MACHINE_SUPPORTS_SAVE )
GAME( 1992, fixeightjt, fixeight, fixeight, fixeight, toaplan2_state, fixeight, ROT270, "Toaplan (Taito license)", "FixEight (Japan, Taito license)", MACHINE_SUPPORTS_SAVE )
GAME( 1992, fixeightbl, fixeight, fixeightbl, fixeightbl, toaplan2_state, fixeightbl, ROT270, "bootleg", "FixEight (Korea, bootleg)", MACHINE_SUPPORTS_SAVE )
GAME( 1992, grindstm, 0, vfive, grindstm, toaplan2_state, vfive, ROT270, "Toaplan", "Grind Stormer", MACHINE_SUPPORTS_SAVE )
GAME( 1992, grindstma, grindstm, vfive, grindstma, toaplan2_state, vfive, ROT270, "Toaplan", "Grind Stormer (older set)", MACHINE_SUPPORTS_SAVE )
GAME( 1993, vfive, grindstm, vfive, vfive, toaplan2_state, vfive, ROT270, "Toaplan", "V-Five (Japan)", MACHINE_SUPPORTS_SAVE )
GAME( 1993, batsugun, 0, batsugun, batsugun, toaplan2_state, dogyuun, ROT270, "Toaplan", "Batsugun", MACHINE_SUPPORTS_SAVE )
GAME( 1993, batsuguna, batsugun, batsugun, batsugun, toaplan2_state, dogyuun, ROT270, "Toaplan", "Batsugun (older set)", MACHINE_SUPPORTS_SAVE )
GAME( 1993, batsugunb, batsugun, batsugun, batsugun, toaplan2_state, dogyuun, ROT270, "Toaplan", "Batsugun (Korean PCB)", MACHINE_SUPPORTS_SAVE ) // cheap looking PCB (same 'TP-030' numbering as original) but without Mask ROMs. Still has original customs etc. Jumpers were set to the Korea Unite Trading license, so likely made in Korea, not a bootleg tho.
GAME( 1993, batsugunsp, batsugun, batsugun, batsugun, toaplan2_state, dogyuun, ROT270, "Toaplan", "Batsugun - Special Version", MACHINE_SUPPORTS_SAVE )
GAME( 1994, pwrkick, 0, pwrkick, pwrkick, driver_device, 0, ROT0, "Sunwise", "Power Kick (Japan)", 0 )
GAME( 1995, othldrby, 0, othldrby, othldrby,driver_device, 0, ROT0, "Sunwise", "Othello Derby (Japan)", 0 )
GAME( 1994, snowbro2, 0, snowbro2, snowbro2, driver_device, 0, ROT0, "Hanafram", "Snow Bros. 2 - With New Elves / Otenki Paradise", MACHINE_SUPPORTS_SAVE )
GAME( 1998, snowbro2b, snowbro2, snowbro2, snowbro2, driver_device, 0, ROT0, "bootleg", "Snow Bros. 2 - With New Elves / Otenki Paradise (bootleg)", MACHINE_SUPPORTS_SAVE )
GAME( 1993, sstriker, 0, mahoudai, sstriker, driver_device, 0, ROT270, "Raizing", "Sorcer Striker (set 1)" , MACHINE_SUPPORTS_SAVE ) // verified on two different PCBs
GAME( 1993, sstrikera, sstriker, mahoudai, sstrikera, driver_device, 0, ROT270, "Raizing", "Sorcer Striker (set 2)" , MACHINE_SUPPORTS_SAVE ) // from Korean board
GAME( 1993, mahoudai, sstriker, mahoudai, mahoudai, driver_device, 0, ROT270, "Raizing (Able license)", "Mahou Daisakusen (Japan)", MACHINE_SUPPORTS_SAVE )
GAME( 1994, kingdmgp, 0, shippumd, kingdmgp, driver_device, 0, ROT270, "Raizing / Eighting", "Kingdom Grandprix", MACHINE_SUPPORTS_SAVE ) // from Korean board, missing letters on credits screen but this is correct
GAME( 1994, shippumd, kingdmgp, shippumd, shippumd, driver_device, 0, ROT270, "Raizing / Eighting", "Shippu Mahou Daisakusen (Japan)", MACHINE_SUPPORTS_SAVE )
GAME( 1996, bgaregga, 0, bgaregga, bgaregga, toaplan2_state, bgaregga, ROT270, "Raizing / Eighting", "Battle Garegga (Europe / USA / Japan / Asia) (Sat Feb 3 1996)", MACHINE_SUPPORTS_SAVE )
GAME( 1996, bgareggahk, bgaregga, bgaregga, bgareggahk, toaplan2_state, bgaregga, ROT270, "Raizing / Eighting", "Battle Garegga (Austria / Hong Kong) (Sat Feb 3 1996)", MACHINE_SUPPORTS_SAVE )
GAME( 1996, bgareggatw, bgaregga, bgaregga, bgareggatw, toaplan2_state, bgaregga, ROT270, "Raizing / Eighting", "Battle Garegga (Taiwan / Germany) (Thu Feb 1 1996)", MACHINE_SUPPORTS_SAVE )
GAME( 1996, bgaregganv, bgaregga, bgaregga, bgareggahk, toaplan2_state, bgaregga, ROT270, "Raizing / Eighting", "Battle Garegga - New Version (Austria / Hong Kong) (Sat Mar 2 1996)" , MACHINE_SUPPORTS_SAVE ) // displays New Version only when set to HK
GAME( 1996, bgareggat2, bgaregga, bgaregga, bgaregga, toaplan2_state, bgaregga, ROT270, "Raizing / Eighting", "Battle Garegga - Type 2 (Europe / USA / Japan / Asia) (Sat Mar 2 1996)" , MACHINE_SUPPORTS_SAVE ) // displays Type 2 only when set to Europe
GAME( 1996, bgareggacn, bgaregga, bgaregga, bgareggacn, toaplan2_state, bgaregga, ROT270, "Raizing / Eighting", "Battle Garegga - Type 2 (Denmark / China) (Tue Apr 2 1996)", MACHINE_SUPPORTS_SAVE ) // displays Type 2 only when set to Denmark
GAME( 1996, bgareggabl, bgaregga, bgareggabl,bgareggacn, toaplan2_state,bgaregga, ROT270, "bootleg", "1945 Part-2 (Chinese hack of Battle Garegga)", MACHINE_SUPPORTS_SAVE )
GAME( 1996, bgareggabla,bgaregga, bgareggabl,bgareggacn, toaplan2_state,bgaregga, ROT270, "bootleg", "Lei Shen Zhuan Thunder Deity Biography (Chinese hack of Battle Garegga)", MACHINE_SUPPORTS_SAVE )
// these are all based on Version B, even if only the Japan version states 'version B'
GAME( 1998, batrider, 0, batrider, batrider, toaplan2_state, batrider, ROT270, "Raizing / Eighting", "Armed Police Batrider (Europe) (Fri Feb 13 1998)", MACHINE_SUPPORTS_SAVE )
GAME( 1998, batrideru, batrider, batrider, batrider, toaplan2_state, batrider, ROT270, "Raizing / Eighting", "Armed Police Batrider (USA) (Fri Feb 13 1998)", MACHINE_SUPPORTS_SAVE )
GAME( 1998, batriderc, batrider, batrider, batrider, toaplan2_state, batrider, ROT270, "Raizing / Eighting", "Armed Police Batrider (China) (Fri Feb 13 1998)", MACHINE_SUPPORTS_SAVE )
GAME( 1998, batriderj, batrider, batrider, batriderj, toaplan2_state, batrider, ROT270, "Raizing / Eighting", "Armed Police Batrider (Japan, B version) (Fri Feb 13 1998)", MACHINE_SUPPORTS_SAVE )
GAME( 1998, batriderk, batrider, batrider, batrider, toaplan2_state, batrider, ROT270, "Raizing / Eighting", "Armed Police Batrider (Korea) (Fri Feb 13 1998)", MACHINE_SUPPORTS_SAVE )
// older revision of the code
GAME( 1998, batriderja, batrider, batrider, batriderj, toaplan2_state, batrider, ROT270, "Raizing / Eighting", "Armed Police Batrider (Japan, older version) (Mon Dec 22 1997)", MACHINE_SUPPORTS_SAVE )
GAME( 1998, batriderhk, batrider, batrider, batrider, toaplan2_state, batrider, ROT270, "Raizing / Eighting", "Armed Police Batrider (Hong Kong) (Mon Dec 22 1997)", MACHINE_SUPPORTS_SAVE )
GAME( 1998, batridert, batrider, batrider, batrider, toaplan2_state, batrider, ROT270, "Raizing / Eighting", "Armed Police Batrider (Taiwan) (Mon Dec 22 1997)", MACHINE_SUPPORTS_SAVE )
// Battle Bakraid
// the 'unlimited' version is a newer revision of the code
GAME( 1999, bbakraid, 0, bbakraid, bbakraid, toaplan2_state, bbakraid, ROT270, "Eighting", "Battle Bakraid - Unlimited Version (USA) (Tue Jun 8 1999)", MACHINE_SUPPORTS_SAVE )
GAME( 1999, bbakraidc, bbakraid, bbakraid, bbakraid, toaplan2_state, bbakraid, ROT270, "Eighting", "Battle Bakraid - Unlimited Version (China) (Tue Jun 8 1999)", MACHINE_SUPPORTS_SAVE )
GAME( 1999, bbakraidj, bbakraid, bbakraid, bbakraid, toaplan2_state, bbakraid, ROT270, "Eighting", "Battle Bakraid - Unlimited Version (Japan) (Tue Jun 8 1999)", MACHINE_SUPPORTS_SAVE )
// older revision of the code
GAME( 1999, bbakraidja, bbakraid, bbakraid, bbakraid, toaplan2_state, bbakraid, ROT270, "Eighting", "Battle Bakraid (Japan) (Wed Apr 7 1999)", MACHINE_SUPPORTS_SAVE )