// license:BSD-3-Clause
// copyright-holders:Jarek Parchanski, Andrea Mazzoleni
/***************************************************************************
Return of the Invaders
driver by Jarek Parchanski, Andrea Mazzoleni
UPL is said to have developed Return of the Invaders for Taito, but some digging
in the ROMs reveals the following strings:
Programed by NAKAKUMA AKIRA
V 1.0 (85.3.15)
NOBUO KODERA
AKIRA NAKAKUMA
HIKARU KASAHARA
COMIX LTD. 1985.
Notes:
- The rom names and locations are derived from PCB pictures.
- The video hardware (especially the sprite system) is quite obviously derived
from a Namco design.
- Two bits of tilemap RAM might be used for tile flip, but the game never sets
them so we can't verify without schematics.
- In addition to a dump of the original MCU, we have a dump from a bootleg MCU.
The game does work with it, but only when the flip screen dip switch is turned
off. If it is set to on, the game hangs when starting a game because the
mcu doesn't answer a command.
See bootleg MCU code at $206 and $435: when the dip switch is on, the
"lda #$00" should be replaced by "lda #$01".
Invaders "G" Connector
Component Side | Solder Side
------------------------------------------------------------------
Ground | 1 | A | Ground
Video Red | 2 | B | Video Ground
Video Green | 3 | C | Video Blue
Negative Composite Sync | 4 | D |
Speaker + | 5 | E | Speaker -
---------- KEY ----------| 6 | 6 |---------- KEY ----------
| 7 | H |
Coinswitch | 8 | J |
| 9 | K |
| 10| L |
| 11| M |
Start Player 1 | 12| N | Start Player 2
| 13| P |
| 14| R |
Joystick Right | 15| S |
Joystick Left | 16| T |
| 17| U |
| 18| V |
| 19| W |
| 20| X |
Fire | 21| Y |
| 22| Z |
Invaders "T" Connector
Component Side | Solder Side
------------------------------------------------------------------
Ground | 1 | A | Ground
| 2 | B |
| 3 | C |
| 4 | D |
| 5 | E |
| 6 | 6 |
---------- KEY ----------| 7 | H |---------- KEY ----------
| 8 | J |
| 9 | K |
| 10| L |
| 11| M |
| 12| N |
| 13| P |
| 14| R |
| 15| S |
| 16| T |
| 17| U |
+5V | 18| V | +5V
Invaders "H" Connector
-----------------------
| 1 | Ground
| 2 | Ground
| 3 |
| 4 |
| 5 | +5V
| 6 | +5V
| 7 |
| 8 |
| 9 | +12V
| 10|-- Key --
| 11|
| 12| +12V
***************************************************************************/
#include "emu.h"
#include "includes/retofinv.h"
#include "cpu/z80/z80.h"
#include "machine/74259.h"
#include "machine/watchdog.h"
#include "sound/sn76496.h"
#include "screen.h"
#include "speaker.h"
void retofinv_state::machine_start()
{
save_item(NAME(m_main_irq_mask));
save_item(NAME(m_sub_irq_mask));
save_item(NAME(m_cpu2_m6000));
}
WRITE8_MEMBER(retofinv_state::cpu2_m6000_w)
{
m_cpu2_m6000 = data;
}
READ8_MEMBER(retofinv_state::cpu0_mf800_r)
{
return m_cpu2_m6000;
}
WRITE8_MEMBER(retofinv_state::soundcommand_w)
{
m_soundlatch->write(space, 0, data);
m_audiocpu->set_input_line(0, HOLD_LINE);
}
WRITE_LINE_MEMBER(retofinv_state::irq0_ack_w)
{
m_main_irq_mask = state;
if (!m_main_irq_mask)
m_maincpu->set_input_line(0, CLEAR_LINE);
}
WRITE_LINE_MEMBER(retofinv_state::irq1_ack_w)
{
m_sub_irq_mask = state;
if (!m_sub_irq_mask)
m_subcpu->set_input_line(0, CLEAR_LINE);
}
WRITE8_MEMBER(retofinv_state::coincounter_w)
{
machine().bookkeeping().coin_counter_w(0, data & 1);
}
WRITE_LINE_MEMBER(retofinv_state::coinlockout_w)
{
machine().bookkeeping().coin_lockout_w(0, !state);
}
READ8_MEMBER(retofinv_state::mcu_status_r)
{
/* bit 4 = when 1, mcu is ready to receive data from main cpu */
/* bit 5 = when 1, mcu has sent data to the main cpu */
return
((CLEAR_LINE == m_68705->host_semaphore_r()) ? 0x10 : 0x00) |
((CLEAR_LINE != m_68705->mcu_semaphore_r()) ? 0x20 : 0x00);
}
/* It is very likely that the main cpu and the sub cpu share the entire
8000-ffff address space, each perhaps holding the other in waitstate
while accessing it. */
/* the main cpu code looks for a string at 7b00 (in the space for the
empty socket at IC73 from 6000-7fff) and if it finds a particular
string there, it jumps to that area, presumably for diagnostic use */
void retofinv_state::bootleg_map(address_map &map)
{
map(0x0000, 0x7fff).rom();
map(0x7fff, 0x7fff).w(this, FUNC(retofinv_state::coincounter_w));
map(0x8000, 0x87ff).ram().w(this, FUNC(retofinv_state::fg_videoram_w)).share("fg_videoram");
map(0x8800, 0x9fff).ram().share("sharedram");
map(0xa000, 0xa7ff).ram().w(this, FUNC(retofinv_state::bg_videoram_w)).share("bg_videoram");
map(0xb800, 0xb802).w(this, FUNC(retofinv_state::gfx_ctrl_w));
map(0xc000, 0xc000).portr("P1");
map(0xc001, 0xc001).portr("P2");
map(0xc002, 0xc002).nopr(); /* bit 7 must be 0, otherwise game resets */
map(0xc004, 0xc004).portr("SYSTEM");
map(0xc005, 0xc005).portr("DSW1");
map(0xc006, 0xc006).portr("DSW2");
map(0xc007, 0xc007).portr("DSW3");
map(0xc800, 0xc807).w("mainlatch", FUNC(ls259_device::write_d0));
map(0xd000, 0xd000).w("watchdog", FUNC(watchdog_timer_device::reset_w));
map(0xd800, 0xd800).w(this, FUNC(retofinv_state::soundcommand_w));
map(0xf800, 0xf800).r(this, FUNC(retofinv_state::cpu0_mf800_r));
}
void retofinv_state::main_map(address_map &map)
{
bootleg_map(map);
map(0xc003, 0xc003).r(this, FUNC(retofinv_state::mcu_status_r));
map(0xe000, 0xe000).r(m_68705, FUNC(taito68705_mcu_device::data_r));
map(0xe800, 0xe800).w(m_68705, FUNC(taito68705_mcu_device::data_w));
}
void retofinv_state::sub_map(address_map &map)
{
map(0x0000, 0x7fff).rom();
map(0x8000, 0x87ff).ram().w(this, FUNC(retofinv_state::fg_videoram_w)).share("fg_videoram");
map(0x8800, 0x9fff).ram().share("sharedram");
map(0xa000, 0xa7ff).ram().w(this, FUNC(retofinv_state::bg_videoram_w)).share("bg_videoram");
map(0xc800, 0xc807).w("mainlatch", FUNC(ls259_device::write_d0));
}
void retofinv_state::sound_map(address_map &map)
{
map(0x0000, 0x1fff).rom();
map(0x2000, 0x27ff).ram(); /* 6116 sram at IC28 */
map(0x4000, 0x4000).r(m_soundlatch, FUNC(generic_latch_8_device::read));
map(0x6000, 0x6000).w(this, FUNC(retofinv_state::cpu2_m6000_w));
map(0x8000, 0x8000).w("sn1", FUNC(sn76489a_device::write));
map(0xa000, 0xa000).w("sn2", FUNC(sn76489a_device::write));
map(0xe000, 0xffff).rom(); /* space for diagnostic ROM */
}
static INPUT_PORTS_START( retofinv )
PORT_START("SYSTEM")
PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_START1 )
PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_START2 )
PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_TILT )
PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_SERVICE1 )
PORT_BIT( 0x10, IP_ACTIVE_HIGH,IPT_COIN1 )
PORT_BIT( 0x20, IP_ACTIVE_HIGH,IPT_COIN2 )
PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_UNUSED )
PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_UNUSED )
PORT_START("P1")
PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_UNUSED )
PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_JOYSTICK_LEFT ) PORT_2WAY
PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_UNUSED )
PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_JOYSTICK_RIGHT ) PORT_2WAY
PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_UNUSED )
PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_UNUSED )
PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_UNUSED )
PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_BUTTON1 )
PORT_START("P2")
PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_UNUSED )
PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_JOYSTICK_LEFT ) PORT_2WAY PORT_COCKTAIL
PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_UNUSED )
PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_JOYSTICK_RIGHT ) PORT_2WAY PORT_COCKTAIL
PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_UNUSED )
PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_UNUSED )
PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_UNUSED )
PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_BUTTON1 ) PORT_COCKTAIL
PORT_START("DSW1")
PORT_DIPNAME( 0x03, 0x03, DEF_STR( Bonus_Life ) ) PORT_DIPLOCATION("DSW-A (RB3):1,2")
PORT_DIPSETTING( 0x03, "30k, 80k & every 80k" )
PORT_DIPSETTING( 0x02, "30k, 80k" )
PORT_DIPSETTING( 0x01, "30k" )
PORT_DIPSETTING( 0x00, DEF_STR( None ) )
PORT_DIPNAME( 0x04, 0x04, DEF_STR( Free_Play ) ) PORT_DIPLOCATION("DSW-A (RB3):3")
PORT_DIPSETTING( 0x04, DEF_STR( No ) )
PORT_DIPSETTING( 0x00, DEF_STR( Yes ) )
PORT_DIPNAME( 0x18, 0x08, DEF_STR( Lives ) ) PORT_DIPLOCATION("DSW-A (RB3):4,5")
PORT_DIPSETTING( 0x18, "1" )
PORT_DIPSETTING( 0x10, "2" )
PORT_DIPSETTING( 0x08, "3" )
PORT_DIPSETTING( 0x00, "5" )
PORT_DIPNAME( 0x20, 0x20, DEF_STR( Unused ) ) PORT_DIPLOCATION("DSW-A (RB3):6") // according to manual
PORT_DIPSETTING( 0x20, DEF_STR( Off ) )
PORT_DIPSETTING( 0x00, DEF_STR( On ) )
PORT_DIPNAME( 0x40, 0x40, DEF_STR( Flip_Screen ) ) PORT_DIPLOCATION("DSW-A (RB3):7")
PORT_DIPSETTING( 0x40, DEF_STR( Off ) )
PORT_DIPSETTING( 0x00, DEF_STR( On ) )
PORT_DIPNAME( 0x80, 0x00, DEF_STR( Cabinet ) ) PORT_DIPLOCATION("DSW-A (RB3):8")
PORT_DIPSETTING( 0x00, DEF_STR( Upright ) )
PORT_DIPSETTING( 0x80, DEF_STR( Cocktail ) )
PORT_START("DSW2")
PORT_DIPNAME( 0x0f, 0x00, DEF_STR( Coin_A ) ) PORT_DIPLOCATION("DSW-B (RB2):1,2,3,4")
PORT_DIPSETTING( 0x0f, DEF_STR( 9C_1C ) )
PORT_DIPSETTING( 0x0e, DEF_STR( 8C_1C ) )
PORT_DIPSETTING( 0x0d, DEF_STR( 7C_1C ) )
PORT_DIPSETTING( 0x0c, DEF_STR( 6C_1C ) )
PORT_DIPSETTING( 0x0b, DEF_STR( 5C_1C ) )
PORT_DIPSETTING( 0x0a, DEF_STR( 4C_1C ) )
PORT_DIPSETTING( 0x09, DEF_STR( 3C_1C ) )
PORT_DIPSETTING( 0x08, DEF_STR( 2C_1C ) )
PORT_DIPSETTING( 0x00, DEF_STR( 1C_1C ) )
PORT_DIPSETTING( 0x01, DEF_STR( 1C_2C ) )
PORT_DIPSETTING( 0x02, DEF_STR( 1C_3C ) )
PORT_DIPSETTING( 0x03, DEF_STR( 1C_4C ) )
PORT_DIPSETTING( 0x04, DEF_STR( 1C_5C ) )
PORT_DIPSETTING( 0x05, DEF_STR( 1C_6C ) )
PORT_DIPSETTING( 0x06, DEF_STR( 1C_7C ) )
PORT_DIPSETTING( 0x07, DEF_STR( 1C_8C ) )
PORT_DIPNAME( 0xf0, 0x00, DEF_STR( Coin_B ) ) PORT_DIPLOCATION("DSW-B (RB2):5,6,7,8")
PORT_DIPSETTING( 0xf0, DEF_STR( 9C_1C ) )
PORT_DIPSETTING( 0xe0, DEF_STR( 8C_1C ) )
PORT_DIPSETTING( 0xd0, DEF_STR( 7C_1C ) )
PORT_DIPSETTING( 0xc0, DEF_STR( 6C_1C ) )
PORT_DIPSETTING( 0xb0, DEF_STR( 5C_1C ) )
PORT_DIPSETTING( 0xa0, DEF_STR( 4C_1C ) )
PORT_DIPSETTING( 0x90, DEF_STR( 3C_1C ) )
PORT_DIPSETTING( 0x80, DEF_STR( 2C_1C ) )
PORT_DIPSETTING( 0x00, DEF_STR( 1C_1C ) )
PORT_DIPSETTING( 0x10, DEF_STR( 1C_2C ) )
PORT_DIPSETTING( 0x20, DEF_STR( 1C_3C ) )
PORT_DIPSETTING( 0x30, DEF_STR( 1C_4C ) )
PORT_DIPSETTING( 0x40, DEF_STR( 1C_5C ) )
PORT_DIPSETTING( 0x50, DEF_STR( 1C_6C ) )
PORT_DIPSETTING( 0x60, DEF_STR( 1C_7C ) )
PORT_DIPSETTING( 0x70, DEF_STR( 1C_8C ) )
PORT_START("DSW3")
PORT_DIPNAME( 0x01, 0x01, "Push Start to Skip Stage (Cheat)") PORT_DIPLOCATION("DSW-C (RB1):1")
PORT_DIPSETTING( 0x01, DEF_STR( Off ) )
PORT_DIPSETTING( 0x00, DEF_STR( On ) )
PORT_DIPNAME( 0x02, 0x02, DEF_STR( Unused ) ) PORT_DIPLOCATION("DSW-C (RB1):2") // according to manual
PORT_DIPSETTING( 0x02, DEF_STR( Off ) )
PORT_DIPSETTING( 0x00, DEF_STR( On ) )
PORT_DIPNAME( 0x04, 0x04, DEF_STR( Unused ) ) PORT_DIPLOCATION("DSW-C (RB1):3") // according to manual
PORT_DIPSETTING( 0x04, DEF_STR( Off ) )
PORT_DIPSETTING( 0x00, DEF_STR( On ) )
PORT_DIPNAME( 0x08, 0x08, DEF_STR( Unused ) ) PORT_DIPLOCATION("DSW-C (RB1):4") // according to manual
PORT_DIPSETTING( 0x08, DEF_STR( Off ) )
PORT_DIPSETTING( 0x00, DEF_STR( On ) )
PORT_DIPNAME( 0x10, 0x10, "Coin Per Play Display" ) PORT_DIPLOCATION("DSW-C (RB1):5")
PORT_DIPSETTING( 0x00, DEF_STR( No ) )
PORT_DIPSETTING( 0x10, DEF_STR( Yes ) )
PORT_DIPNAME( 0x20, 0x20, "Year Display" ) PORT_DIPLOCATION("DSW-C (RB1):6")
PORT_DIPSETTING( 0x00, DEF_STR( No ) )
PORT_DIPSETTING( 0x20, DEF_STR( Yes ) )
PORT_DIPNAME( 0x40, 0x40, "Invulnerability (Cheat)") PORT_DIPLOCATION("DSW-C (RB1):7")
PORT_DIPSETTING( 0x40, DEF_STR( Off ) )
PORT_DIPSETTING( 0x00, DEF_STR( On ) )
PORT_DIPNAME( 0x80, 0x80, DEF_STR( Coinage ) ) PORT_DIPLOCATION("DSW-C (RB1):8") // unused according to manual
PORT_DIPSETTING( 0x80, "A and B" )
PORT_DIPSETTING( 0x00, "A only" )
INPUT_PORTS_END
static INPUT_PORTS_START( retofin2 )
PORT_INCLUDE( retofinv )
PORT_MODIFY( "DSW1" )
PORT_DIPNAME( 0x18, 0x08, DEF_STR( Lives ) ) PORT_DIPLOCATION("DSW-A (RB3):4,5")
PORT_DIPSETTING( 0x18, "1" )
PORT_DIPSETTING( 0x10, "2" )
PORT_DIPSETTING( 0x08, "3" )
PORT_DIPSETTING( 0x00, "4" )
INPUT_PORTS_END
static const gfx_layout charlayout =
{
8,8,
RGN_FRAC(1,2), /* bottom half of ROM is empty */
1,
{ 0 },
{ 7, 6, 5, 4, 3, 2, 1, 0 },
{ 0*8, 1*8, 2*8, 3*8, 4*8, 5*8, 6*8, 7*8 },
8*8
};
static const gfx_layout bglayout =
{
8,8,
RGN_FRAC(1,2),
4,
{ 0, RGN_FRAC(1,2)+4, RGN_FRAC(1,2), 4 },
{ 0, 1, 2, 3, 8*8, 8*8+1, 8*8+2, 8*8+3 },
{ 0*8, 1*8, 2*8, 3*8, 4*8, 5*8, 6*8, 7*8 },
16*8
};
static const gfx_layout spritelayout =
{
16,16,
RGN_FRAC(1,2),
4,
{ 0, RGN_FRAC(1,2)+4, RGN_FRAC(1,2), 4 },
{ 0, 1, 2, 3, 8*8, 8*8+1, 8*8+2, 8*8+3, 16*8+0, 16*8+1, 16*8+2, 16*8+3,
24*8+0, 24*8+1, 24*8+2, 24*8+3 },
{ 0*8, 1*8, 2*8, 3*8, 4*8, 5*8, 6*8, 7*8,
32*8, 33*8, 34*8, 35*8, 36*8, 37*8, 38*8, 39*8 },
64*8
};
static GFXDECODE_START( retofinv )
GFXDECODE_ENTRY( "gfx1", 0, charlayout, 0, 256 )
GFXDECODE_ENTRY( "gfx2", 0, spritelayout, 256*2, 64 )
GFXDECODE_ENTRY( "gfx3", 0, bglayout, 64*16+256*2, 64 )
GFXDECODE_END
INTERRUPT_GEN_MEMBER(retofinv_state::main_vblank_irq)
{
if(m_main_irq_mask)
device.execute().set_input_line(0, ASSERT_LINE);
}
INTERRUPT_GEN_MEMBER(retofinv_state::sub_vblank_irq)
{
if(m_sub_irq_mask)
device.execute().set_input_line(0, ASSERT_LINE);
}
MACHINE_CONFIG_START(retofinv_state::retofinv)
/* basic machine hardware */
MCFG_CPU_ADD("maincpu", Z80, XTAL(18'432'000)/6) /* XTAL and divider verified, 3.072 MHz */
MCFG_CPU_PROGRAM_MAP(main_map)
MCFG_CPU_VBLANK_INT_DRIVER("screen", retofinv_state, main_vblank_irq)
MCFG_CPU_ADD("sub", Z80, XTAL(18'432'000)/6) /* XTAL and divider verified, 3.072 MHz */
MCFG_CPU_PROGRAM_MAP(sub_map)
MCFG_CPU_VBLANK_INT_DRIVER("screen", retofinv_state, sub_vblank_irq)
MCFG_CPU_ADD("audiocpu", Z80, XTAL(18'432'000)/6) /* XTAL and divider verified, 3.072 MHz */
MCFG_CPU_PROGRAM_MAP(sound_map)
MCFG_CPU_PERIODIC_INT_DRIVER(retofinv_state, nmi_line_pulse, 2*60) // wrong, should be ~128-132 per frame, not 120.
MCFG_CPU_ADD("68705", TAITO68705_MCU, XTAL(18'432'000)/6) /* XTAL and divider verified, 3.072 MHz */
MCFG_QUANTUM_TIME(attotime::from_hz(6000)) /* 100 CPU slices per frame - enough for the sound CPU to read all commands */
MCFG_DEVICE_ADD("mainlatch", LS259, 0) // IC72 - probably shared between CPUs
MCFG_ADDRESSABLE_LATCH_Q0_OUT_CB(WRITELINE(retofinv_state, irq0_ack_w))
MCFG_ADDRESSABLE_LATCH_Q1_OUT_CB(WRITELINE(retofinv_state, coinlockout_w))
MCFG_ADDRESSABLE_LATCH_Q2_OUT_CB(INPUTLINE("audiocpu", INPUT_LINE_RESET)) MCFG_DEVCB_INVERT
MCFG_ADDRESSABLE_LATCH_Q3_OUT_CB(DEVWRITELINE("68705", taito68705_mcu_device, reset_w)) MCFG_DEVCB_INVERT
MCFG_ADDRESSABLE_LATCH_Q4_OUT_CB(WRITELINE(retofinv_state, irq1_ack_w))
MCFG_ADDRESSABLE_LATCH_Q5_OUT_CB(INPUTLINE("sub", INPUT_LINE_RESET)) MCFG_DEVCB_INVERT
MCFG_WATCHDOG_ADD("watchdog")
/* video hardware */
MCFG_SCREEN_ADD("screen", RASTER)
MCFG_SCREEN_REFRESH_RATE(60.58) // vsync measured at 60.58hz
MCFG_SCREEN_VBLANK_TIME(ATTOSECONDS_IN_USEC(0)) // not accurate
MCFG_SCREEN_SIZE(36*8, 28*8)
MCFG_SCREEN_VISIBLE_AREA(0*8, 36*8-1, 0*8, 28*8-1)
MCFG_SCREEN_UPDATE_DRIVER(retofinv_state, screen_update)
MCFG_SCREEN_PALETTE("palette")
MCFG_GFXDECODE_ADD("gfxdecode", "palette", retofinv)
MCFG_PALETTE_ADD("palette", 256*2+64*16+64*16)
MCFG_PALETTE_INDIRECT_ENTRIES(256)
MCFG_PALETTE_INIT_OWNER(retofinv_state, retofinv)
/* sound hardware */
MCFG_SPEAKER_STANDARD_MONO("mono")
MCFG_GENERIC_LATCH_8_ADD("soundlatch")
MCFG_SOUND_ADD("sn1", SN76489A, XTAL(18'432'000)/6) /* @IC5?; XTAL, chip type, and divider verified, 3.072 MHz */
MCFG_SOUND_ROUTE(ALL_OUTPUTS, "mono", 0.80)
MCFG_SOUND_ADD("sn2", SN76489A, XTAL(18'432'000)/6) /* @IC6?; XTAL, chip type, and divider verified, 3.072 MHz */
MCFG_SOUND_ROUTE(ALL_OUTPUTS, "mono", 0.80)
MACHINE_CONFIG_END
/* bootleg which has different palette clut */
MACHINE_CONFIG_START(retofinv_state::retofinvb1)
retofinv(config);
MCFG_PALETTE_MODIFY("palette")
MCFG_PALETTE_INIT_OWNER(retofinv_state, retofinv_bl)
MACHINE_CONFIG_END
/* bootleg which has no mcu */
MACHINE_CONFIG_START(retofinv_state::retofinvb_nomcu)
retofinv(config);
MCFG_CPU_MODIFY("maincpu")
MCFG_CPU_PROGRAM_MAP(bootleg_map)
MCFG_DEVICE_MODIFY("mainlatch")
MCFG_ADDRESSABLE_LATCH_Q3_OUT_CB(NOOP)
MCFG_DEVICE_REMOVE("68705")
MACHINE_CONFIG_END
/* bootleg which has different pallete clut and also has no mcu */
MACHINE_CONFIG_START(retofinv_state::retofinvb1_nomcu)
retofinvb1(config);
MCFG_CPU_MODIFY("maincpu")
MCFG_CPU_PROGRAM_MAP(bootleg_map)
MCFG_DEVICE_MODIFY("mainlatch")
MCFG_ADDRESSABLE_LATCH_Q3_OUT_CB(NOOP)
MCFG_DEVICE_REMOVE("68705")
MACHINE_CONFIG_END
/***************************************************************************
Game driver(s)
***************************************************************************/
ROM_START( retofinv )
ROM_REGION( 0x10000, "maincpu", 0 )
ROM_LOAD( "a37__03.ic70", 0x0000, 0x2000, CRC(eae7459d) SHA1(c105f6adbd4c09decaad68ed13163d8f9b55e646) )
ROM_LOAD( "a37__02.ic71", 0x2000, 0x2000, CRC(72895e37) SHA1(42fb904338e9f92a79d587eac401d456e7fb6e55) )
ROM_LOAD( "a37__01.ic72", 0x4000, 0x2000, CRC(505dd20b) SHA1(3a34b1515bb834ff9e2d86b0b43a752d9619307b) )
// ic73 socket is empty
ROM_REGION( 0x10000, "sub", 0 )
ROM_LOAD( "a37__04.ic62", 0x0000, 0x2000, CRC(d2899cc1) SHA1(fdbec743b06f4cdcc134ef863e4e71337ad0b2c5) )
// ic63 socket is empty
// ic64 socket is empty
// ic65 socket is empty
ROM_REGION( 0x10000, "audiocpu", 0 )
ROM_LOAD( "a37__05.ic17", 0x0000, 0x2000, CRC(9025abea) SHA1(2f03e8572f23624d7cd1215a55109e97fd66e271) )
ROM_REGION( 0x0800, "68705:mcu", 0 ) /* 2k for the microcontroller */
ROM_LOAD( "a37__09.ic37", 0x00000, 0x0800, CRC(6a6d008d) SHA1(dce55b65db22ba97cb7b3d6d545575e7945d42ad) ) /* original mc68705p5 from Taito board */
/* Interestingly enough, the security bit is NOT set on this MCU, but the
part is definitely a 68705P5 from an original Taito pcb running original
Taito code! Compare the MCU code to Taito games A17, A22, A23, A24, A30,
A34, A45, A47, A50, A54(and A51), A52, A64, A67, A68, probably others too,
MCU code between 0x420 and 0x73f is identical, and boot vector is 0x570.
The MCU command jump table at 0x740-0x780 differs on each, as does the
lookup table at 0x350-0x41f, and the "custom command code area" from
0x80-0x34F */
ROM_REGION( 0x02000, "gfx1", 0 )
ROM_LOAD( "a37__16.gfxboard.ic61", 0x0000, 0x2000, CRC(4e3f501c) SHA1(2d832f4038ae65bfdeedfab870f6f1176ec6b676) )
ROM_REGION( 0x08000, "gfx2", 0 )
ROM_LOAD( "a37__10.gfxboard.ic8", 0x0000, 0x2000, CRC(6afdeec8) SHA1(782fe0a8aea48c3c270318b7ba011fc6fce0db7a) )
ROM_LOAD( "a37__11.gfxboard.ic9", 0x2000, 0x2000, CRC(d3dc9da3) SHA1(0d98d6e993b5a4845a23802751023b7a593dce29) )
ROM_LOAD( "a37__12.gfxboard.ic10", 0x4000, 0x2000, CRC(d10b2eed) SHA1(3809a0adf935a119f9ee0d4c24f1456c35d2a6fa) )
ROM_LOAD( "a37__13.gfxboard.ic11", 0x6000, 0x2000, CRC(00ca6b3d) SHA1(08ce5b13d5ebc79cc803949f4ba9e630e6cd92b8) )
ROM_REGION( 0x04000, "gfx3", 0 )
ROM_LOAD( "a37__14.gfxboard.ic55", 0x0000, 0x2000, CRC(ef7f8651) SHA1(2d91057501e5e9c4255e0d55fff0d99c2a5be7e8) )
ROM_LOAD( "a37__15.gfxboard.ic56", 0x2000, 0x2000, CRC(03b40905) SHA1(c10d87796e8a6e6a2a37c6fb713821cc87299cc8) )
ROM_REGION( 0x0300, "palette", 0 )
// these three are Fujitsu 7052 PROMS, == 82S129 256x4bit TS proms
ROM_LOAD( "a37-06.ic13", 0x0000, 0x0100, CRC(e9643b8b) SHA1(7bbb92a42e7c3effb701fc7b2c24f2470f31b063) ) /* palette red bits */
ROM_LOAD( "a37-07.ic4", 0x0100, 0x0100, CRC(e8f34e11) SHA1(8f438561b8d46ffff00747ed8baf0ebb6a081615) ) /* palette green bits */
ROM_LOAD( "a37-08.ic3", 0x0200, 0x0100, CRC(50030af0) SHA1(e748ae0b8702b7d20fb65c254dceee23246b3d13) ) /* palette blue bits */
ROM_REGION( 0x0800, "clut", 0 )
// these four are Harris 7643 PROMS, == 82S137 1kx4 TS proms and form the tile color lookup tables; address is scrambled slightly.
ROM_LOAD_NIB_HIGH( "a37-17.gfxboard.ic36", 0x0000, 0x0400, CRC(c63cf10e) SHA1(bca8823aef31ab8f4c22201c4efd51f9a4124c8f) )
ROM_LOAD_NIB_LOW ( "a37-18.gfxboard.ic37", 0x0000, 0x0400, CRC(6db07bd1) SHA1(05b6728a96fecedae16cb3aa02de642a3a32d99d) )
ROM_LOAD_NIB_HIGH( "a37-19.gfxboard.ic83", 0x0400, 0x0400, CRC(a92aea27) SHA1(98e4726f40fdf0df2008ef03801ee35ede99e893) )
ROM_LOAD_NIB_LOW ( "a37-20.gfxboard.ic84", 0x0400, 0x0400, CRC(77a7aaf6) SHA1(61a474f1ad09b89ff8302f2d903b86a90823116c) )
ROM_END
ROM_START( retofinvb ) // bootleg with black-box reverse-engineered mcu. Unclear what the 'correct' rom labels are for this set.
ROM_REGION( 0x10000, "maincpu", 0 )
ROM_LOAD( "a37-03.70", 0x0000, 0x2000, CRC(eae7459d) SHA1(c105f6adbd4c09decaad68ed13163d8f9b55e646) )
ROM_LOAD( "a37-02.71", 0x2000, 0x2000, CRC(72895e37) SHA1(42fb904338e9f92a79d587eac401d456e7fb6e55) )
ROM_LOAD( "a37-01.72", 0x4000, 0x2000, CRC(505dd20b) SHA1(3a34b1515bb834ff9e2d86b0b43a752d9619307b) )
ROM_REGION( 0x10000, "sub", 0 )
ROM_LOAD( "a37-04.62", 0x0000, 0x2000, CRC(d2899cc1) SHA1(fdbec743b06f4cdcc134ef863e4e71337ad0b2c5) )
ROM_REGION( 0x10000, "audiocpu", 0 )
ROM_LOAD( "a37-05.17", 0x0000, 0x2000, CRC(9025abea) SHA1(2f03e8572f23624d7cd1215a55109e97fd66e271) )
ROM_REGION( 0x0800, "68705:mcu", 0 ) /* 2k for the microcontroller */
/* this MCU is from a bootleg board and is a 'clean room' reimplementation by bootleggers, and is not 100% functional (flip screen does not work, see notes at top of driver) */
ROM_LOAD( "a37-09_bootleg.37", 0x00000, 0x0800, CRC(79bd6ded) SHA1(4967e95b4461c1bfb4e933d1804677799014f77b) )
ROM_REGION( 0x02000, "gfx1", 0 )
ROM_LOAD( "a37-16.61", 0x0000, 0x2000, CRC(4e3f501c) SHA1(2d832f4038ae65bfdeedfab870f6f1176ec6b676) )
ROM_REGION( 0x08000, "gfx2", 0 )
ROM_LOAD( "a37-10.8", 0x0000, 0x2000, CRC(6afdeec8) SHA1(782fe0a8aea48c3c270318b7ba011fc6fce0db7a) )
ROM_LOAD( "a37-11.9", 0x2000, 0x2000, CRC(d3dc9da3) SHA1(0d98d6e993b5a4845a23802751023b7a593dce29) )
ROM_LOAD( "a37-12.10", 0x4000, 0x2000, CRC(d10b2eed) SHA1(3809a0adf935a119f9ee0d4c24f1456c35d2a6fa) )
ROM_LOAD( "a37-13.11", 0x6000, 0x2000, CRC(00ca6b3d) SHA1(08ce5b13d5ebc79cc803949f4ba9e630e6cd92b8) )
ROM_REGION( 0x04000, "gfx3", 0 )
ROM_LOAD( "a37-14.55", 0x0000, 0x2000, CRC(ef7f8651) SHA1(2d91057501e5e9c4255e0d55fff0d99c2a5be7e8) )
ROM_LOAD( "a37-15.56", 0x2000, 0x2000, CRC(03b40905) SHA1(c10d87796e8a6e6a2a37c6fb713821cc87299cc8) )
ROM_REGION( 0x0300, "palette", 0 )
ROM_LOAD( "a37-06.13", 0x0000, 0x0100, CRC(e9643b8b) SHA1(7bbb92a42e7c3effb701fc7b2c24f2470f31b063) ) /* palette red bits */
ROM_LOAD( "a37-07.4", 0x0100, 0x0100, CRC(e8f34e11) SHA1(8f438561b8d46ffff00747ed8baf0ebb6a081615) ) /* palette green bits */
ROM_LOAD( "a37-08.3", 0x0200, 0x0100, CRC(50030af0) SHA1(e748ae0b8702b7d20fb65c254dceee23246b3d13) ) /* palette blue bits */
// below may be incorrect; this bootleg may be supposed to use the same 4 proms as the main set above does.
ROM_REGION( 0x0800, "clut", 0 ) // bootleg uses a single 82s191 2kx8 TS prom for the tile color lookup tables; data is scrambled slightly.
ROM_LOAD( "82s191n", 0x0000, 0x0800, CRC(93c891e3) SHA1(643a0107717b6a434432dda73a0102e6e8adbca7) )
ROM_END
ROM_START( retofinvb1 ) // bootleg with mcu hacked out. Unclear what the 'correct' rom labels are for this set other than the 3 main roms.
ROM_REGION( 0x10000, "maincpu", 0 )
ROM_LOAD( "roi.02", 0x0000, 0x2000, CRC(d98fd462) SHA1(fd35e13b7dee58639a01b040b8f84d42bb40b633) )
ROM_LOAD( "roi.01b", 0x2000, 0x2000, CRC(3379f930) SHA1(c67d687a10b6240bd6e2fbdb15e1b7d276e6fc07) )
ROM_LOAD( "roi.01", 0x4000, 0x2000, CRC(57679062) SHA1(4f121101ab1cb8de8e693e5984ef23fa587fe696) )
ROM_REGION( 0x10000, "sub", 0 )
ROM_LOAD( "a37-04.62", 0x0000, 0x2000, CRC(d2899cc1) SHA1(fdbec743b06f4cdcc134ef863e4e71337ad0b2c5) )
ROM_REGION( 0x10000, "audiocpu", 0 )
ROM_LOAD( "a37-05.17", 0x0000, 0x2000, CRC(9025abea) SHA1(2f03e8572f23624d7cd1215a55109e97fd66e271) )
ROM_REGION( 0x02000, "gfx1", 0 )
ROM_LOAD( "a37-16.61", 0x0000, 0x2000, CRC(4e3f501c) SHA1(2d832f4038ae65bfdeedfab870f6f1176ec6b676) )
ROM_REGION( 0x08000, "gfx2", 0 )
ROM_LOAD( "a37-10.8", 0x0000, 0x2000, CRC(6afdeec8) SHA1(782fe0a8aea48c3c270318b7ba011fc6fce0db7a) )
ROM_LOAD( "a37-11.9", 0x2000, 0x2000, CRC(d3dc9da3) SHA1(0d98d6e993b5a4845a23802751023b7a593dce29) )
ROM_LOAD( "a37-12.10", 0x4000, 0x2000, CRC(d10b2eed) SHA1(3809a0adf935a119f9ee0d4c24f1456c35d2a6fa) )
ROM_LOAD( "a37-13.11", 0x6000, 0x2000, CRC(00ca6b3d) SHA1(08ce5b13d5ebc79cc803949f4ba9e630e6cd92b8) )
ROM_REGION( 0x04000, "gfx3", 0 )
ROM_LOAD( "a37-14.55", 0x0000, 0x2000, CRC(ef7f8651) SHA1(2d91057501e5e9c4255e0d55fff0d99c2a5be7e8) )
ROM_LOAD( "a37-15.56", 0x2000, 0x2000, CRC(03b40905) SHA1(c10d87796e8a6e6a2a37c6fb713821cc87299cc8) )
ROM_REGION( 0x0300, "palette", 0 )
ROM_LOAD( "a37-06.13", 0x0000, 0x0100, CRC(e9643b8b) SHA1(7bbb92a42e7c3effb701fc7b2c24f2470f31b063) ) /* palette red bits */
ROM_LOAD( "a37-07.4", 0x0100, 0x0100, CRC(e8f34e11) SHA1(8f438561b8d46ffff00747ed8baf0ebb6a081615) ) /* palette green bits */
ROM_LOAD( "a37-08.3", 0x0200, 0x0100, CRC(50030af0) SHA1(e748ae0b8702b7d20fb65c254dceee23246b3d13) ) /* palette blue bits */
ROM_REGION( 0x0800, "clut", 0 ) // bootleg uses a single 82s191 2kx8 TS prom for the tile color lookup tables; data is scrambled slightly.
ROM_LOAD( "82s191n", 0x0000, 0x0800, CRC(93c891e3) SHA1(643a0107717b6a434432dda73a0102e6e8adbca7) )
ROM_END
ROM_START( retofinvb2 ) // bootleg with mcu hacked out. Unclear what the 'correct' rom labels are for this set other than 2 of the 3 main roms.
ROM_REGION( 0x10000, "maincpu", 0 )
ROM_LOAD( "ri-c.1e", 0x0000, 0x2000, CRC(e3c31260) SHA1(cc8774251c567da2e4a54091223927c95f497fe8) )
ROM_LOAD( "roi.01b", 0x2000, 0x2000, CRC(3379f930) SHA1(c67d687a10b6240bd6e2fbdb15e1b7d276e6fc07) ) // likely should be "ri-b.1d"
ROM_LOAD( "ri-a.1c", 0x4000, 0x2000, CRC(3ae7c530) SHA1(5d1be375494fa07124071067661c4bfc2d724d54) )
ROM_REGION( 0x10000, "sub", 0 )
ROM_LOAD( "a37-04.62", 0x0000, 0x2000, CRC(d2899cc1) SHA1(fdbec743b06f4cdcc134ef863e4e71337ad0b2c5) )
ROM_REGION( 0x10000, "audiocpu", 0 )
ROM_LOAD( "a37-05.17", 0x0000, 0x2000, CRC(9025abea) SHA1(2f03e8572f23624d7cd1215a55109e97fd66e271) )
ROM_REGION( 0x02000, "gfx1", 0 )
ROM_LOAD( "a37-16.61", 0x0000, 0x2000, CRC(4e3f501c) SHA1(2d832f4038ae65bfdeedfab870f6f1176ec6b676) )
ROM_REGION( 0x08000, "gfx2", 0 )
ROM_LOAD( "a37-10.8", 0x0000, 0x2000, CRC(6afdeec8) SHA1(782fe0a8aea48c3c270318b7ba011fc6fce0db7a) )
ROM_LOAD( "a37-11.9", 0x2000, 0x2000, CRC(d3dc9da3) SHA1(0d98d6e993b5a4845a23802751023b7a593dce29) )
ROM_LOAD( "a37-12.10", 0x4000, 0x2000, CRC(d10b2eed) SHA1(3809a0adf935a119f9ee0d4c24f1456c35d2a6fa) )
ROM_LOAD( "a37-13.11", 0x6000, 0x2000, CRC(00ca6b3d) SHA1(08ce5b13d5ebc79cc803949f4ba9e630e6cd92b8) )
ROM_REGION( 0x04000, "gfx3", 0 )
ROM_LOAD( "a37-14.55", 0x0000, 0x2000, CRC(ef7f8651) SHA1(2d91057501e5e9c4255e0d55fff0d99c2a5be7e8) )
ROM_LOAD( "a37-15.56", 0x2000, 0x2000, CRC(03b40905) SHA1(c10d87796e8a6e6a2a37c6fb713821cc87299cc8) )
ROM_REGION( 0x0300, "palette", 0 )
ROM_LOAD( "a37-06.13", 0x0000, 0x0100, CRC(e9643b8b) SHA1(7bbb92a42e7c3effb701fc7b2c24f2470f31b063) ) /* palette red bits */
ROM_LOAD( "a37-07.4", 0x0100, 0x0100, CRC(e8f34e11) SHA1(8f438561b8d46ffff00747ed8baf0ebb6a081615) ) /* palette green bits */
ROM_LOAD( "a37-08.3", 0x0200, 0x0100, CRC(50030af0) SHA1(e748ae0b8702b7d20fb65c254dceee23246b3d13) ) /* palette blue bits */
ROM_REGION( 0x0800, "clut", 0 ) // bootleg uses a single 82s191 2kx8 TS prom for the tile color lookup tables; data is scrambled slightly.
ROM_LOAD( "82s191n", 0x0000, 0x0800, CRC(93c891e3) SHA1(643a0107717b6a434432dda73a0102e6e8adbca7) )
ROM_END
ROM_START( retofinvb3 ) // Italian bootleg PCB. Only maincpu ROMs differ from parent and the MCU isn't present.
ROM_REGION( 0x10000, "maincpu", 0 )
ROM_LOAD( "1.11", 0x0000, 0x2000, CRC(71c216ca) SHA1(34d04889dae6d6f586bce99413c1864dee52cf39) ) // unique
ROM_LOAD( "2.10", 0x2000, 0x2000, CRC(3379f930) SHA1(c67d687a10b6240bd6e2fbdb15e1b7d276e6fc07) ) // same as retofinvb1 and retofinvb2
ROM_LOAD( "3.9", 0x4000, 0x2000, CRC(92d79fa8) SHA1(00610cd51ba73783d12bc97584ca0fd7fff044eb) ) // unique
ROM_REGION( 0x10000, "sub", 0 )
ROM_LOAD( "4.15", 0x0000, 0x2000, CRC(d2899cc1) SHA1(fdbec743b06f4cdcc134ef863e4e71337ad0b2c5) )
ROM_REGION( 0x10000, "audiocpu", 0 )
ROM_LOAD( "5.bin", 0x0000, 0x2000, CRC(9025abea) SHA1(2f03e8572f23624d7cd1215a55109e97fd66e271) )
ROM_REGION( 0x02000, "gfx1", 0 )
ROM_LOAD( "16.7", 0x0000, 0x2000, CRC(4e3f501c) SHA1(2d832f4038ae65bfdeedfab870f6f1176ec6b676) )
ROM_REGION( 0x08000, "gfx2", 0 )
ROM_LOAD( "10.1", 0x0000, 0x2000, CRC(6afdeec8) SHA1(782fe0a8aea48c3c270318b7ba011fc6fce0db7a) )
ROM_LOAD( "11.2", 0x2000, 0x2000, CRC(d3dc9da3) SHA1(0d98d6e993b5a4845a23802751023b7a593dce29) )
ROM_LOAD( "12.3", 0x4000, 0x2000, CRC(d10b2eed) SHA1(3809a0adf935a119f9ee0d4c24f1456c35d2a6fa) )
ROM_LOAD( "13.4", 0x6000, 0x2000, CRC(00ca6b3d) SHA1(08ce5b13d5ebc79cc803949f4ba9e630e6cd92b8) )
ROM_REGION( 0x04000, "gfx3", 0 )
ROM_LOAD( "14.5", 0x0000, 0x2000, CRC(ef7f8651) SHA1(2d91057501e5e9c4255e0d55fff0d99c2a5be7e8) )
ROM_LOAD( "15.6", 0x2000, 0x2000, CRC(03b40905) SHA1(c10d87796e8a6e6a2a37c6fb713821cc87299cc8) )
ROM_REGION( 0x0300, "palette", 0 )
ROM_LOAD( "74s287.b", 0x0000, 0x0100, CRC(e9643b8b) SHA1(7bbb92a42e7c3effb701fc7b2c24f2470f31b063) ) /* palette red bits */
ROM_LOAD( "74s287.c", 0x0100, 0x0100, CRC(e8f34e11) SHA1(8f438561b8d46ffff00747ed8baf0ebb6a081615) ) /* palette green bits */
ROM_LOAD( "74s287.a", 0x0200, 0x0100, CRC(50030af0) SHA1(e748ae0b8702b7d20fb65c254dceee23246b3d13) ) /* palette blue bits */
ROM_REGION( 0x0800, "clut", 0 )
ROM_LOAD_NIB_HIGH( "6353-1.a", 0x0000, 0x0400, CRC(c63cf10e) SHA1(bca8823aef31ab8f4c22201c4efd51f9a4124c8f) )
ROM_LOAD_NIB_LOW ( "6353-1.b", 0x0000, 0x0400, CRC(6db07bd1) SHA1(05b6728a96fecedae16cb3aa02de642a3a32d99d) )
ROM_LOAD_NIB_HIGH( "6353-1.d", 0x0400, 0x0400, CRC(a92aea27) SHA1(98e4726f40fdf0df2008ef03801ee35ede99e893) )
ROM_LOAD_NIB_LOW ( "6353-1.c", 0x0400, 0x0400, CRC(77a7aaf6) SHA1(61a474f1ad09b89ff8302f2d903b86a90823116c) )
ROM_END
GAME( 1985, retofinv, 0, retofinv, retofinv, retofinv_state, 0, ROT90, "Taito Corporation", "Return of the Invaders", MACHINE_SUPPORTS_SAVE )
GAME( 1985, retofinvb, retofinv, retofinvb1, retofinv, retofinv_state, 0, ROT90, "bootleg", "Return of the Invaders (bootleg w/MCU)", MACHINE_SUPPORTS_SAVE )
GAME( 1985, retofinvb1, retofinv, retofinvb1_nomcu, retofinv, retofinv_state, 0, ROT90, "bootleg", "Return of the Invaders (bootleg no MCU set 1)", MACHINE_SUPPORTS_SAVE )
GAME( 1985, retofinvb2, retofinv, retofinvb1_nomcu, retofin2, retofinv_state, 0, ROT90, "bootleg", "Return of the Invaders (bootleg no MCU set 2)", MACHINE_SUPPORTS_SAVE )
GAME( 1985, retofinvb3, retofinv, retofinvb_nomcu, retofinv, retofinv_state, 0, ROT90, "bootleg", "Return of the Invaders (bootleg no MCU set 3)", MACHINE_SUPPORTS_SAVE )