// license:BSD-3-Clause
// copyright-holders:R. Belmont
/***************************************************************************
apple1.cpp - Apple I
Next generation driver written in February 2016 by R. Belmont.
Thanks to the original crew.
Apple I has:
6502 @ 1.023 MHz (~0.960 MHz with RAM refresh)
4 or 8 KB RAM on-board
256 byte Monitor ROM
No IRQs, no sound, dumb terminal video
6820 PIA for keyboard / terminal interface
-------------------------------------------------------------------
How to use cassettes:
The system has no error checking or checksums, and the cassette
has no header.
Therefore, you must know the details, and pass these to the
interface yourself.
BASIC has no cassette handling. You must enter the monitor
with: CALL -151
then when finished, re-enter BASIC with: E2B3R
Examples:
A machine-language program will typically be like this:
C100R (enter the interface)
0300.0FFFR (enter the load and end addresses, then load the tape)
You start the tape.
When the prompt returns you stop the tape.
0300R (run your program)
To Load Tape Basic:
C100R
E000.EFFFR
You start the tape.
When the prompt returns you stop the tape.
E000R (It must say 4C - if not, your tape is no good).
The BASIC prompt will appear
>@
A BASIC program is split into two areas, one for the scratch pad,
and one for the program proper.
In BASIC you may have to adjust the allowed memory area, such as
LOMEM = 768
Then, go to the monitor: CALL -151
C100R (enter the interface)
00A4.00FFR 0300.0FFFR (load the 2 parts)
You start the tape.
When the prompt returns you stop the tape.
E2B3R (back to BASIC)
You can LIST or RUN now.
Saving is almost the same, when you specify the address range, enter
W instead of R. The difficulty is finding out how long your program is.
Insert a blank tape
C100R
0300.0FFFW
Quickly press Record.
When the prompt returns, press Stop.
**********************************************************************/
#include "emu.h"
#include "cpu/m6502/m6502.h"
#include "machine/6821pia.h"
#include "imagedev/snapquik.h"
#include "machine/ram.h"
#include "bus/a1bus/a1bus.h"
#include "bus/a1bus/a1cassette.h"
#include "bus/a1bus/a1cffa.h"
#include "emupal.h"
#include "screen.h"
#include "softlist.h"
#define A1_CPU_TAG "maincpu"
#define A1_PIA_TAG "pia6821"
#define A1_BUS_TAG "a1bus"
#define A1_BASICRAM_TAG "basicram"
class apple1_state : public driver_device
{
public:
apple1_state(const machine_config &mconfig, device_type type, const char *tag)
: driver_device(mconfig, type, tag),
m_maincpu(*this, A1_CPU_TAG),
m_pia(*this, A1_PIA_TAG),
m_ram(*this, RAM_TAG),
m_screen(*this, "screen"),
m_basicram(*this, A1_BASICRAM_TAG),
m_kb0(*this, "KEY0"),
m_kb1(*this, "KEY1"),
m_kb2(*this, "KEY2"),
m_kb3(*this, "KEY3"),
m_kbspecial(*this, "KBSPECIAL")
{ }
void apple1(machine_config &config);
protected:
virtual void machine_start() override;
virtual void machine_reset() override;
private:
required_device<cpu_device> m_maincpu;
required_device<pia6821_device> m_pia;
required_device<ram_device> m_ram;
required_device<screen_device> m_screen;
required_shared_ptr<uint8_t> m_basicram;
required_ioport m_kb0, m_kb1, m_kb2, m_kb3, m_kbspecial;
uint8_t *m_ram_ptr, *m_char_ptr;
int m_ram_size, m_char_size;
uint8_t m_vram[40*24];
int m_cursx, m_cursy;
bool m_reset_down;
bool m_clear_down;
uint8_t m_transchar;
uint16_t m_lastports[4];
emu_timer *m_ready_start_timer, *m_ready_end_timer, *m_kbd_strobe_timer;
uint32_t screen_update(screen_device &screen, bitmap_ind16 &bitmap, const rectangle &cliprect);
DECLARE_READ8_MEMBER(ram_r);
DECLARE_WRITE8_MEMBER(ram_w);
DECLARE_READ8_MEMBER(pia_keyboard_r);
DECLARE_WRITE8_MEMBER(pia_display_w);
DECLARE_WRITE_LINE_MEMBER(pia_display_gate_w);
DECLARE_SNAPSHOT_LOAD_MEMBER( apple1 );
TIMER_CALLBACK_MEMBER(ready_start_cb);
TIMER_CALLBACK_MEMBER(ready_end_cb);
TIMER_CALLBACK_MEMBER(keyboard_strobe_cb);
void apple1_map(address_map &map);
void plot_text_character(bitmap_ind16 &bitmap, int xpos, int ypos, int xscale, uint32_t code, const uint8_t *textgfx_data, uint32_t textgfx_datalen);
void poll_keyboard();
};
static const uint8_t apple1_keymap[] =
{
'0', '1', '2', '3', '4', '5', '6', '7', '8', '9', '-', '=', '[', ']', ';', '\'', // KEY0
',', '.', '/', '\\', 'A', 'B', 'C', 'D', 'E', 'F', 'G', 'H', 'I', 'J', 'K', 'L', // KEY1
'M', 'N', 'O', 'P', 'Q', 'R', 'S', 'T', 'U', 'V', 'W', 'X', 'Y', 'Z', '\r', '_', // KEY2
' ', '\x1b', 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, // KEY3
')', '!', '@', '#', '$', '%', '^', '&', '*', '(', '_', '+', '[', ']', ':', '"', // KEY0 + shift
'<', '>', '?', '\\', 'A', 'B', 'C', 'D', 'E', 'F', 'G', 'H', 'I', 'J', 'K', 'L', // KEY1 + shift
'M', 'N', 'O', 'P', 'Q', 'R', 'S', 'T', 'U', 'V', 'W', 'X', 'Y', 'Z', '\r', '_', // KEY2 + shift
' ', '\x1b', 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, // KEY3 + shift
'0', '1', '\x00', '\x1b', '\x1c', '\x1d', '\x1e', '\x1f', '8', '9', '\x1f', '=', '\x1b', '\x1d', ';', '\'', // KEY0 + CTRL
',', '.', '/', '\x1c', '\x01', '\x02', '\x03', '\x04', '\x05', '\x06', '\x07', '\x08', '\x09', '\x0a', '\x0b', '\x0c', // KEY1 + CTRL
'\x0d', '\x0e', '\x0f', '\x10', '\x11', '\x12', '\x13', '\x14', '\x15', '\x16', '\x17', '\x18', '\x19', '\x1a', '\r', '_', // KEY2 + CTRL
' ', '\x1b', 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, // KEY3 + CTRL
};
// header is "LOAD:abcdDATA:" where abcd is the starting address
SNAPSHOT_LOAD_MEMBER( apple1_state, apple1 )
{
uint64_t snapsize;
uint8_t *data;
uint16_t start, end;
static const char hd1[6] = "LOAD:";
static const char hd2[6] = "DATA:";
// get the snapshot's size
snapsize = image.length();
if (snapsize < 12)
{
logerror("Snapshot is too short\n");
return image_init_result::FAIL;
}
if ((snapsize - 12) > 65535)
{
logerror("Snapshot is too long\n");
return image_init_result::FAIL;
}
data = (uint8_t *)image.ptr();
if (!data)
{
logerror("Internal error loading snapshot\n");
return image_init_result::FAIL;
}
if ((memcmp(hd1, data, 5)) || (memcmp(hd2, &data[7], 5)))
{
logerror("Snapshot is invalid\n");
return image_init_result::FAIL;
}
start = (data[5]<<8) | data[6];
end = (snapsize - 12) + start;
// check if this fits in RAM; load below 0xe000 must fit in RAMSIZE,
// load at 0xe000 must fit in 4K
if (((start < 0xe000) && (end > (m_ram_size - 1))) || (end > 0xefff))
{
logerror("Snapshot can't fit in RAM\n");
return image_init_result::FAIL;
}
if (start < 0xe000)
{
memcpy(m_ram_ptr + start, &data[12], snapsize - 12);
}
else if ((start >= 0xe000) && (start <= 0xefff))
{
memcpy(m_basicram + (start - 0xe000), &data[12], snapsize - 12);
}
else
{
logerror("Snapshot has invalid load address %04x\n", start);
return image_init_result::FAIL;
}
return image_init_result::PASS;
}
void apple1_state::poll_keyboard()
{
uint8_t special = m_kbspecial->read();
uint16_t ports[4];
int rawkey = 0;
bool bKeypress = false;
// handle special keys first:
if (special & 0x10) // RESET
{
m_reset_down = true;
m_maincpu->set_input_line(INPUT_LINE_RESET, ASSERT_LINE);
m_pia->reset();
}
else if (m_reset_down)
{
m_reset_down = false;
m_maincpu->set_input_line(INPUT_LINE_RESET, CLEAR_LINE);
}
if (special & 0x20) // CLEAR SCREEN
{
m_clear_down = true;
memset(m_vram, 0, sizeof(m_vram));
m_cursx = m_cursy = 0;
}
else
{
m_clear_down = false;
}
// lower the keyboard strobe
m_pia->ca1_w(0);
// cache all the rows
ports[0] = m_kb0->read();
ports[1] = m_kb1->read();
ports[2] = m_kb2->read();
ports[3] = m_kb3->read();
for (int port = 0; port < 4; port++)
{
uint16_t ptread = ports[port] ^ m_lastports[port];
for (int bit = 0; bit < 16; bit++)
{
// key changed?
if (ptread & (1 << bit))
{
// key down?
if (ports[port] & (1 << bit))
{
rawkey = (port * 16) + bit;
m_lastports[port] |= (1 << bit);
port = 4; // force outer for loop to quit too
bKeypress = true;
}
else // key up
{
m_lastports[port] &= ~(1 << bit);
}
break;
}
}
}
if (bKeypress)
{
if ((special & 0xc) != 0)
{
m_transchar = apple1_keymap[rawkey + (8*16)];
}
else if ((special & 0x3) != 0)
{
m_transchar = apple1_keymap[rawkey + (4*16)];
}
else
{
m_transchar = apple1_keymap[rawkey];
}
// pulse the strobe line
m_pia->ca1_w(1);
}
}
void apple1_state::plot_text_character(bitmap_ind16 &bitmap, int xpos, int ypos, int xscale, uint32_t code,
const uint8_t *textgfx_data, uint32_t textgfx_datalen)
{
int x, y, i;
const uint8_t *chardata;
uint16_t color;
int fg = 1, bg = 0;
int charcode = (code & 0x1f) | (((code ^ 0x40) & 0x40) >> 1);
/* look up the character data */
chardata = &textgfx_data[(charcode * 8)];
for (y = 0; y < 8; y++)
{
for (x = 0; x < 7; x++)
{
color = (chardata[y] & (1 << (6-x))) ? fg : bg;
for (i = 0; i < xscale; i++)
{
bitmap.pix16(ypos + y, xpos + (x * xscale) + i) = color;
}
}
}
}
uint32_t apple1_state::screen_update(screen_device &screen, bitmap_ind16 &bitmap, const rectangle &cliprect)
{
int vramad;
int cursor_blink = 0;
uint8_t curs_save = 0;
poll_keyboard();
// the cursor 555 timer counts 0.52 of a second; the cursor is ON for
// 2 of those counts and OFF for the last one.
if ((int(machine().time().as_double() / (0.52 / 3.0)) % 3) < 2)
{
curs_save = m_vram[(m_cursy * 40) + m_cursx];
m_vram[(m_cursy * 40) + m_cursx] = 0x40;
cursor_blink = 1;
}
for (int row = 0; row < cliprect.bottom(); row += 8)
{
for (int col = 0; col < 40; col++)
{
vramad = ((row/8) * 40) + col;
plot_text_character(bitmap, col * 14, row, 2, m_vram[vramad],
m_char_ptr, m_char_size);
}
}
if (cursor_blink)
{
m_vram[(m_cursy * 40) + m_cursx] = curs_save;
}
return 0;
}
void apple1_state::machine_start()
{
m_ram_ptr = m_ram->pointer();
m_ram_size = m_ram->size();
m_char_ptr = memregion("gfx1")->base();
m_char_size = memregion("gfx1")->bytes();
m_reset_down = m_clear_down = false;
m_ready_start_timer = machine().scheduler().timer_alloc(timer_expired_delegate(FUNC(apple1_state::ready_start_cb), this));
m_ready_end_timer = machine().scheduler().timer_alloc(timer_expired_delegate(FUNC(apple1_state::ready_end_cb), this));
m_kbd_strobe_timer = machine().scheduler().timer_alloc(timer_expired_delegate(FUNC(apple1_state::keyboard_strobe_cb), this));
// setup save states
save_item(NAME(m_vram));
save_item(NAME(m_cursx));
save_item(NAME(m_cursy));
save_item(NAME(m_reset_down));
save_item(NAME(m_clear_down));
save_item(NAME(m_transchar));
save_item(NAME(m_lastports));
}
void apple1_state::machine_reset()
{
memset(m_vram, 0, sizeof(m_vram));
m_transchar = 0;
m_cursx = m_cursy = 0;
m_lastports[0] = m_lastports[1] = m_lastports[2] = m_lastports[3] = 0;
}
READ8_MEMBER(apple1_state::ram_r)
{
if (offset < m_ram_size)
{
return m_ram_ptr[offset];
}
return 0xff;
}
WRITE8_MEMBER(apple1_state::ram_w)
{
if (offset < m_ram_size)
{
m_ram_ptr[offset] = data;
}
}
void apple1_state::apple1_map(address_map &map)
{
map(0x0000, 0xbfff).rw(FUNC(apple1_state::ram_r), FUNC(apple1_state::ram_w));
map(0xd010, 0xd013).mirror(0x0fec).rw(m_pia, FUNC(pia6821_device::read), FUNC(pia6821_device::write));
map(0xe000, 0xefff).ram().share(A1_BASICRAM_TAG);
map(0xff00, 0xffff).rom().region(A1_CPU_TAG, 0);
}
READ8_MEMBER(apple1_state::pia_keyboard_r)
{
return m_transchar | 0x80; // bit 7 is wired high, similar-ish to the Apple II
}
WRITE8_MEMBER(apple1_state::pia_display_w)
{
data &= 0x7f; // D7 is ignored by the video h/w
// ignore characters if CLEAR is down
if (m_clear_down)
{
return;
}
// video h/w rejects control characters except CR
if ((data < 32) && (data != '\r'))
{
return;
}
if (data == '\r')
{
m_cursx = 0;
m_cursy++;
}
else
{
m_vram[(m_cursy * 40) + m_cursx] = data;
m_cursx++;
if (m_cursx > 39)
{
m_cursx = 0;
m_cursy++;
}
}
// scroll the screen if we're at the bottom
if (m_cursy > 23)
{
for (int sy = 0; sy < 23; sy++)
{
memcpy(&m_vram[sy * 40], &m_vram[(sy + 1) * 40], 40);
}
memset(&m_vram[23*40], 0, 40);
m_cursy = 23;
}
}
// CB2 here is connected two places: Port B bit 7 for CPU readback,
// and to the display hardware
WRITE_LINE_MEMBER(apple1_state::pia_display_gate_w)
{
m_pia->write_portb((state << 7) ^ 0x80);
// falling edge means start the display timer
if (state == CLEAR_LINE)
{
m_ready_start_timer->adjust(m_screen->time_until_pos(m_cursy, m_cursx));
}
}
TIMER_CALLBACK_MEMBER(apple1_state::ready_start_cb)
{
// we're ready, pulse CB1 for 3500 nanoseconds
m_pia->cb1_w(0);
m_ready_end_timer->adjust(attotime::from_nsec(3500));
}
TIMER_CALLBACK_MEMBER(apple1_state::ready_end_cb)
{
m_pia->cb1_w(1);
}
TIMER_CALLBACK_MEMBER(apple1_state::keyboard_strobe_cb)
{
m_pia->ca1_w(0);
}
static INPUT_PORTS_START( apple1 )
PORT_START("KEY0")
PORT_BIT( 0x0001, IP_ACTIVE_HIGH, IPT_KEYBOARD) PORT_CODE(KEYCODE_0) PORT_CHAR('0') PORT_CHAR(')')
PORT_BIT( 0x0002, IP_ACTIVE_HIGH, IPT_KEYBOARD) PORT_CODE(KEYCODE_1) PORT_CHAR('1') PORT_CHAR('!')
PORT_BIT( 0x0004, IP_ACTIVE_HIGH, IPT_KEYBOARD) PORT_CODE(KEYCODE_2) PORT_CHAR('2') PORT_CHAR('@')
PORT_BIT( 0x0008, IP_ACTIVE_HIGH, IPT_KEYBOARD) PORT_CODE(KEYCODE_3) PORT_CHAR('3') PORT_CHAR('#')
PORT_BIT( 0x0010, IP_ACTIVE_HIGH, IPT_KEYBOARD) PORT_CODE(KEYCODE_4) PORT_CHAR('4') PORT_CHAR('$')
PORT_BIT( 0x0020, IP_ACTIVE_HIGH, IPT_KEYBOARD) PORT_CODE(KEYCODE_5) PORT_CHAR('5') PORT_CHAR('%')
PORT_BIT( 0x0040, IP_ACTIVE_HIGH, IPT_KEYBOARD) PORT_CODE(KEYCODE_6) PORT_CHAR('6') PORT_CHAR('^')
PORT_BIT( 0x0080, IP_ACTIVE_HIGH, IPT_KEYBOARD) PORT_CODE(KEYCODE_7) PORT_CHAR('7') PORT_CHAR('&')
PORT_BIT( 0x0100, IP_ACTIVE_HIGH, IPT_KEYBOARD) PORT_CODE(KEYCODE_8) PORT_CHAR('8') PORT_CHAR('*')
PORT_BIT( 0x0200, IP_ACTIVE_HIGH, IPT_KEYBOARD) PORT_CODE(KEYCODE_9) PORT_CHAR('9') PORT_CHAR('(')
PORT_BIT( 0x0400, IP_ACTIVE_HIGH, IPT_KEYBOARD) PORT_CODE(KEYCODE_MINUS) PORT_CHAR('-') PORT_CHAR('_')
PORT_BIT( 0x0800, IP_ACTIVE_HIGH, IPT_KEYBOARD) PORT_CODE(KEYCODE_EQUALS) PORT_CHAR('=') PORT_CHAR('+')
PORT_BIT( 0x1000, IP_ACTIVE_HIGH, IPT_KEYBOARD) PORT_CODE(KEYCODE_OPENBRACE) PORT_CHAR('[')
PORT_BIT( 0x2000, IP_ACTIVE_HIGH, IPT_KEYBOARD) PORT_CODE(KEYCODE_CLOSEBRACE) PORT_CHAR(']')
PORT_BIT( 0x4000, IP_ACTIVE_HIGH, IPT_KEYBOARD) PORT_CODE(KEYCODE_COLON) PORT_CHAR(';') PORT_CHAR(':')
PORT_BIT( 0x8000, IP_ACTIVE_HIGH, IPT_KEYBOARD) PORT_CODE(KEYCODE_QUOTE) PORT_CHAR('\'') PORT_CHAR('"')
PORT_START("KEY1")
PORT_BIT( 0x0001, IP_ACTIVE_HIGH, IPT_KEYBOARD) PORT_CODE(KEYCODE_COMMA) PORT_CHAR(',') PORT_CHAR('<')
PORT_BIT( 0x0002, IP_ACTIVE_HIGH, IPT_KEYBOARD) PORT_CODE(KEYCODE_STOP) PORT_CHAR('.') PORT_CHAR('>')
PORT_BIT( 0x0004, IP_ACTIVE_HIGH, IPT_KEYBOARD) PORT_CODE(KEYCODE_SLASH) PORT_CHAR('/') PORT_CHAR('?')
PORT_BIT( 0x0008, IP_ACTIVE_HIGH, IPT_KEYBOARD) PORT_CODE(KEYCODE_BACKSLASH) PORT_CHAR('\\')
PORT_BIT( 0x0010, IP_ACTIVE_HIGH, IPT_KEYBOARD) PORT_CODE(KEYCODE_A) PORT_CHAR('A')
PORT_BIT( 0x0020, IP_ACTIVE_HIGH, IPT_KEYBOARD) PORT_CODE(KEYCODE_B) PORT_CHAR('B')
PORT_BIT( 0x0040, IP_ACTIVE_HIGH, IPT_KEYBOARD) PORT_CODE(KEYCODE_C) PORT_CHAR('C')
PORT_BIT( 0x0080, IP_ACTIVE_HIGH, IPT_KEYBOARD) PORT_CODE(KEYCODE_D) PORT_CHAR('D')
PORT_BIT( 0x0100, IP_ACTIVE_HIGH, IPT_KEYBOARD) PORT_CODE(KEYCODE_E) PORT_CHAR('E')
PORT_BIT( 0x0200, IP_ACTIVE_HIGH, IPT_KEYBOARD) PORT_CODE(KEYCODE_F) PORT_CHAR('F')
PORT_BIT( 0x0400, IP_ACTIVE_HIGH, IPT_KEYBOARD) PORT_CODE(KEYCODE_G) PORT_CHAR('G')
PORT_BIT( 0x0800, IP_ACTIVE_HIGH, IPT_KEYBOARD) PORT_CODE(KEYCODE_H) PORT_CHAR('H')
PORT_BIT( 0x1000, IP_ACTIVE_HIGH, IPT_KEYBOARD) PORT_CODE(KEYCODE_I) PORT_CHAR('I')
PORT_BIT( 0x2000, IP_ACTIVE_HIGH, IPT_KEYBOARD) PORT_CODE(KEYCODE_J) PORT_CHAR('J')
PORT_BIT( 0x4000, IP_ACTIVE_HIGH, IPT_KEYBOARD) PORT_CODE(KEYCODE_K) PORT_CHAR('K')
PORT_BIT( 0x8000, IP_ACTIVE_HIGH, IPT_KEYBOARD) PORT_CODE(KEYCODE_L) PORT_CHAR('L')
PORT_START("KEY2")
PORT_BIT( 0x0001, IP_ACTIVE_HIGH, IPT_KEYBOARD) PORT_CODE(KEYCODE_M) PORT_CHAR('M')
PORT_BIT( 0x0002, IP_ACTIVE_HIGH, IPT_KEYBOARD) PORT_CODE(KEYCODE_N) PORT_CHAR('N')
PORT_BIT( 0x0004, IP_ACTIVE_HIGH, IPT_KEYBOARD) PORT_CODE(KEYCODE_O) PORT_CHAR('O')
PORT_BIT( 0x0008, IP_ACTIVE_HIGH, IPT_KEYBOARD) PORT_CODE(KEYCODE_P) PORT_CHAR('P')
PORT_BIT( 0x0010, IP_ACTIVE_HIGH, IPT_KEYBOARD) PORT_CODE(KEYCODE_Q) PORT_CHAR('Q')
PORT_BIT( 0x0020, IP_ACTIVE_HIGH, IPT_KEYBOARD) PORT_CODE(KEYCODE_R) PORT_CHAR('R')
PORT_BIT( 0x0040, IP_ACTIVE_HIGH, IPT_KEYBOARD) PORT_CODE(KEYCODE_S) PORT_CHAR('S')
PORT_BIT( 0x0080, IP_ACTIVE_HIGH, IPT_KEYBOARD) PORT_CODE(KEYCODE_T) PORT_CHAR('T')
PORT_BIT( 0x0100, IP_ACTIVE_HIGH, IPT_KEYBOARD) PORT_CODE(KEYCODE_U) PORT_CHAR('U')
PORT_BIT( 0x0200, IP_ACTIVE_HIGH, IPT_KEYBOARD) PORT_CODE(KEYCODE_V) PORT_CHAR('V')
PORT_BIT( 0x0400, IP_ACTIVE_HIGH, IPT_KEYBOARD) PORT_CODE(KEYCODE_W) PORT_CHAR('W')
PORT_BIT( 0x0800, IP_ACTIVE_HIGH, IPT_KEYBOARD) PORT_CODE(KEYCODE_X) PORT_CHAR('X')
PORT_BIT( 0x1000, IP_ACTIVE_HIGH, IPT_KEYBOARD) PORT_CODE(KEYCODE_Y) PORT_CHAR('Y')
PORT_BIT( 0x2000, IP_ACTIVE_HIGH, IPT_KEYBOARD) PORT_CODE(KEYCODE_Z) PORT_CHAR('Z')
PORT_BIT( 0x4000, IP_ACTIVE_HIGH, IPT_KEYBOARD) PORT_CODE(KEYCODE_ENTER) PORT_CHAR(13)
PORT_BIT( 0x8000, IP_ACTIVE_HIGH, IPT_KEYBOARD) PORT_NAME("Backspace") PORT_CODE(KEYCODE_BACKSPACE) PORT_CHAR('_')
PORT_START("KEY3")
PORT_BIT( 0x0001, IP_ACTIVE_HIGH, IPT_KEYBOARD) PORT_CODE(KEYCODE_SPACE) PORT_CHAR(' ')
PORT_BIT( 0x0002, IP_ACTIVE_HIGH, IPT_KEYBOARD) PORT_NAME("Escape") PORT_CODE(KEYCODE_ESC) PORT_CHAR(UCHAR_MAMEKEY(ESC))
PORT_START("KBSPECIAL")
PORT_BIT( 0x0001, IP_ACTIVE_HIGH, IPT_KEYBOARD) PORT_NAME("Left Shift") PORT_CODE(KEYCODE_LSHIFT) PORT_CHAR(UCHAR_SHIFT_1)
PORT_BIT( 0x0002, IP_ACTIVE_HIGH, IPT_KEYBOARD) PORT_NAME("Right Shift") PORT_CODE(KEYCODE_RSHIFT) PORT_CHAR(UCHAR_SHIFT_1)
PORT_BIT( 0x0004, IP_ACTIVE_HIGH, IPT_KEYBOARD) PORT_NAME("Left Control") PORT_CODE(KEYCODE_LCONTROL) PORT_CHAR(UCHAR_SHIFT_2)
PORT_BIT( 0x0008, IP_ACTIVE_HIGH, IPT_KEYBOARD) PORT_NAME("Right Control") PORT_CODE(KEYCODE_RCONTROL) PORT_CHAR(UCHAR_SHIFT_2)
PORT_BIT( 0x0010, IP_ACTIVE_HIGH, IPT_KEYBOARD) PORT_NAME("Reset") PORT_CODE(KEYCODE_F12) PORT_CHAR(UCHAR_MAMEKEY(F1))
PORT_BIT( 0x0020, IP_ACTIVE_HIGH, IPT_KEYBOARD) PORT_NAME("Clear") PORT_CODE(KEYCODE_F2) PORT_CHAR(UCHAR_MAMEKEY(F2))
INPUT_PORTS_END
static void apple1_cards(device_slot_interface &device)
{
device.option_add("cassette", A1BUS_CASSETTE);
device.option_add("cffa", A1BUS_CFFA);
}
MACHINE_CONFIG_START(apple1_state::apple1)
MCFG_DEVICE_ADD(m_maincpu, M6502, 960000) // effective CPU speed
MCFG_DEVICE_PROGRAM_MAP(apple1_map)
// video timings are identical to the Apple II, unsurprisingly
MCFG_SCREEN_ADD(m_screen, RASTER)
MCFG_SCREEN_RAW_PARAMS(XTAL(14'318'181), (65*7)*2, 0, (40*7)*2, 262, 0, 192)
MCFG_SCREEN_UPDATE_DRIVER(apple1_state, screen_update)
MCFG_SCREEN_PALETTE("palette")
PALETTE(config, "palette", palette_device::MONOCHROME);
PIA6821(config, m_pia, 0);
m_pia->readpa_handler().set(FUNC(apple1_state::pia_keyboard_r));
m_pia->writepb_handler().set(FUNC(apple1_state::pia_display_w));
m_pia->cb2_handler().set(FUNC(apple1_state::pia_display_gate_w));
MCFG_DEVICE_ADD(A1_BUS_TAG, A1BUS, 0)
MCFG_A1BUS_CPU(m_maincpu)
MCFG_DEVICE_ADD("exp", A1BUS_SLOT, 0, A1_BUS_TAG, apple1_cards, "cassette")
MCFG_SNAPSHOT_ADD("snapshot", apple1_state, apple1, "snp", 0)
MCFG_SOFTWARE_LIST_ADD("cass_list", "apple1")
RAM(config, RAM_TAG).set_default_size("48K").set_extra_options("4K,8K,12K,16K,20K,24K,28K,32K,36K,40K,44K");
MACHINE_CONFIG_END
ROM_START(apple1)
ROM_REGION(0x100, A1_CPU_TAG, 0)
ROM_LOAD_NIB_HIGH("apple-a2.a2", 0x0000, 0x0100, CRC(254bfb95) SHA1(b6468b72295b7d8ac288d104d252f24de1f1d611) )
ROM_LOAD_NIB_LOW("apple-a1.a1", 0x0000, 0x0100, CRC(434f8ce6) SHA1(9deee2d39903209b20c3fc6b58e16372f8efece1) )
ROM_REGION(0x0200, "gfx1",0)
ROM_LOAD("s2513.d2", 0x0000, 0x0200, CRC(a7e567fc) SHA1(b18aae0a2d4f92f5a7e22640719bbc4652f3f4ee)) // apple1.vid
ROM_END
/* YEAR NAME PARENT COMPAT MACHINE INPUT CLASS INIT COMPANY FULLNAME */
COMP( 1976, apple1, 0, 0, apple1, apple1, apple1_state, empty_init, "Apple Computer", "Apple I", MACHINE_NO_SOUND_HW | MACHINE_SUPPORTS_SAVE )