// license:GPL-2.0+
// copyright-holders:Peter Trauner, Dan Boris, Dirk Best, Robbbert
/******************************************************************************
PeT mess@utanet.at Nov 2000
Updated by Dan Boris, 2000-04-03
Rewrite in progress, Dirk Best, 2007-07-31
Updated by Robbbert 2019-04-14
ToDo:
- Implement punchtape reader/writer
- Front panel Run/Step switch (switch S2)
******************************************************************************/
#include "emu.h"
#include "includes/aim65.h"
#include "softlist.h"
#include "speaker.h"
#include "aim65.lh"
/** R6502 Clock.
*
* The R6502 on AIM65 operates at 1 MHz. The frequency reference is a 4 MHz
* crystal controlled oscillator. Dual D-type flip-flop Z10 divides the 4 MHz
* signal by four to drive the R6502 phase 0 (O0) input with a 1 MHz clock.
*/
static constexpr XTAL AIM65_CLOCK(4_MHz_XTAL / 4);
/***************************************************************************
ADDRESS MAPS
***************************************************************************/
/* Note: RAM is mapped dynamically in machine/aim65.c */
void aim65_state::mem_map(address_map &map)
{
map(0x1000, 0x3fff).noprw(); /* User available expansions */
map(0x4000, 0x7fff).rom(); /* 4 ROM sockets in 16K PROM/ROM module */
map(0x8000, 0x9fff).noprw(); /* User available expansions */
map(0xa000, 0xa00f).mirror(0x3f0).m(m_via1, FUNC(via6522_device::map)); // user via
map(0xa400, 0xa47f).m(m_riot, FUNC(mos6532_new_device::ram_map));
map(0xa480, 0xa497).m(m_riot, FUNC(mos6532_new_device::io_map));
map(0xa498, 0xa7ff).noprw(); /* Not available */
map(0xa800, 0xa80f).mirror(0x3f0).m(m_via0, FUNC(via6522_device::map)); // system via
map(0xac00, 0xac03).rw(m_pia, FUNC(pia6821_device::read), FUNC(pia6821_device::write));
map(0xac04, 0xac43).ram(); /* PIA RAM */
map(0xac44, 0xafff).noprw(); /* Not available */
map(0xb000, 0xffff).rom(); /* 5 ROM sockets */
}
/***************************************************************************
INPUT PORTS
***************************************************************************/
static INPUT_PORTS_START( aim65 )
PORT_START("KEY.0")
PORT_BIT(0x01, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_NAME("Space") PORT_CODE(KEYCODE_SPACE) PORT_CHAR(32)
PORT_BIT(0x02, IP_ACTIVE_LOW, IPT_UNUSED)
PORT_BIT(0x04, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_NAME(". >") PORT_CODE(KEYCODE_STOP) PORT_CHAR('.') PORT_CHAR('>')
PORT_BIT(0x08, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_NAME("M") PORT_CODE(KEYCODE_M) PORT_CHAR('m')
PORT_BIT(0x10, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_NAME("B") PORT_CODE(KEYCODE_B) PORT_CHAR('b')
PORT_BIT(0x20, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_NAME("C") PORT_CODE(KEYCODE_C) PORT_CHAR('c')
PORT_BIT(0x40, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_NAME("Z") PORT_CODE(KEYCODE_Z) PORT_CHAR('z')
PORT_BIT(0x80, IP_ACTIVE_LOW, IPT_UNUSED)
PORT_START("KEY.1")
PORT_BIT(0x01, IP_ACTIVE_LOW, IPT_UNUSED)
PORT_BIT(0x02, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_NAME("LF @") PORT_CODE(KEYCODE_QUOTE) PORT_CHAR(10) PORT_CHAR('@')
PORT_BIT(0x04, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_NAME("L") PORT_CODE(KEYCODE_L) PORT_CHAR('l')
PORT_BIT(0x08, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_NAME("J") PORT_CODE(KEYCODE_J) PORT_CHAR('j')
PORT_BIT(0x10, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_NAME("G") PORT_CODE(KEYCODE_G) PORT_CHAR('g')
PORT_BIT(0x20, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_NAME("D") PORT_CODE(KEYCODE_D) PORT_CHAR('d')
PORT_BIT(0x40, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_NAME("A") PORT_CODE(KEYCODE_A) PORT_CHAR('a')
PORT_BIT(0x80, IP_ACTIVE_LOW, IPT_UNUSED)
PORT_START("KEY.2")
PORT_BIT(0x01, IP_ACTIVE_LOW, IPT_UNUSED)
PORT_BIT(0x02, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_NAME("Print") PORT_CODE(KEYCODE_BACKSPACE) PORT_CHAR(UCHAR_MAMEKEY(PRTSCR))
PORT_BIT(0x04, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_NAME("P") PORT_CODE(KEYCODE_P) PORT_CHAR('p')
PORT_BIT(0x08, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_NAME("I") PORT_CODE(KEYCODE_I) PORT_CHAR('i')
PORT_BIT(0x10, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_NAME("Y") PORT_CODE(KEYCODE_Y) PORT_CHAR('y')
PORT_BIT(0x20, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_NAME("R") PORT_CODE(KEYCODE_R) PORT_CHAR('r')
PORT_BIT(0x40, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_NAME("W") PORT_CODE(KEYCODE_W) PORT_CHAR('w')
PORT_BIT(0x80, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_NAME("Esc") PORT_CODE(KEYCODE_ESC) PORT_CHAR(UCHAR_MAMEKEY(ESC))
PORT_START("KEY.3")
PORT_BIT(0x01, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_NAME("Return") PORT_CODE(KEYCODE_ENTER) PORT_CHAR(13)
PORT_BIT(0x02, IP_ACTIVE_LOW, IPT_UNUSED)
PORT_BIT(0x04, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_NAME("- =") PORT_CODE(KEYCODE_OPENBRACE) PORT_CHAR('-') PORT_CHAR('=')
PORT_BIT(0x08, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_NAME("O") PORT_CODE(KEYCODE_O) PORT_CHAR('o')
PORT_BIT(0x10, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_NAME("U") PORT_CODE(KEYCODE_U) PORT_CHAR('u')
PORT_BIT(0x20, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_NAME("T") PORT_CODE(KEYCODE_T) PORT_CHAR('t')
PORT_BIT(0x40, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_NAME("E") PORT_CODE(KEYCODE_E) PORT_CHAR('e')
PORT_BIT(0x80, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_NAME("Q") PORT_CODE(KEYCODE_Q) PORT_CHAR('q')
PORT_START("KEY.4")
PORT_BIT(0x01, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_NAME("Ctrl") PORT_CODE(KEYCODE_CAPSLOCK) PORT_CHAR(UCHAR_SHIFT_2)
PORT_BIT(0x02, IP_ACTIVE_LOW, IPT_UNUSED)
PORT_BIT(0x04, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_NAME(": *") PORT_CODE(KEYCODE_MINUS) PORT_CHAR(':') PORT_CHAR('*')
PORT_BIT(0x08, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_NAME("9 )") PORT_CODE(KEYCODE_9) PORT_CHAR('9') PORT_CHAR(')')
PORT_BIT(0x10, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_NAME("7 '") PORT_CODE(KEYCODE_7) PORT_CHAR('7') PORT_CHAR('\'')
PORT_BIT(0x20, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_NAME("5 %") PORT_CODE(KEYCODE_5) PORT_CHAR('5') PORT_CHAR('%')
PORT_BIT(0x40, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_NAME("3 #") PORT_CODE(KEYCODE_3) PORT_CHAR('3') PORT_CHAR('#')
PORT_BIT(0x80, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_NAME("1 !") PORT_CODE(KEYCODE_1) PORT_CHAR('1') PORT_CHAR('!')
PORT_START("KEY.5")
PORT_BIT(0x01, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_NAME("Left Shift") PORT_CODE(KEYCODE_LSHIFT) PORT_CHAR(UCHAR_SHIFT_1)
PORT_BIT(0x02, IP_ACTIVE_LOW, IPT_UNUSED)
PORT_BIT(0x04, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_NAME("0") PORT_CODE(KEYCODE_0) PORT_CHAR('0')
PORT_BIT(0x08, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_NAME("8 (") PORT_CODE(KEYCODE_8) PORT_CHAR('8') PORT_CHAR('(')
PORT_BIT(0x10, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_NAME("6 &") PORT_CODE(KEYCODE_6) PORT_CHAR('6') PORT_CHAR('&')
PORT_BIT(0x20, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_NAME("4 $") PORT_CODE(KEYCODE_4) PORT_CHAR('4') PORT_CHAR('$')
PORT_BIT(0x40, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_NAME("2 \"") PORT_CODE(KEYCODE_2) PORT_CHAR('2') PORT_CHAR('\"')
PORT_BIT(0x80, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_NAME("F3") PORT_CODE(KEYCODE_EQUALS) PORT_CHAR(UCHAR_MAMEKEY(F3))
PORT_START("KEY.6")
PORT_BIT(0x01, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_NAME("Right Shift") PORT_CODE(KEYCODE_RSHIFT) PORT_CHAR(UCHAR_SHIFT_1)
PORT_BIT(0x02, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_NAME("Del") PORT_CODE(KEYCODE_TILDE) PORT_CHAR(8)
PORT_BIT(0x04, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_NAME("; +") PORT_CODE(KEYCODE_COLON) PORT_CHAR(';') PORT_CHAR('+')
PORT_BIT(0x08, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_NAME("K") PORT_CODE(KEYCODE_K) PORT_CHAR('k')
PORT_BIT(0x10, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_NAME("H") PORT_CODE(KEYCODE_H) PORT_CHAR('h')
PORT_BIT(0x20, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_NAME("F") PORT_CODE(KEYCODE_F) PORT_CHAR('f')
PORT_BIT(0x40, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_NAME("S") PORT_CODE(KEYCODE_S) PORT_CHAR('s')
PORT_BIT(0x80, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_NAME("F2") PORT_CODE(KEYCODE_CLOSEBRACE) PORT_CHAR(UCHAR_MAMEKEY(F2))
PORT_START("KEY.7")
PORT_BIT(0x01, IP_ACTIVE_LOW, IPT_UNUSED)
PORT_BIT(0x02, IP_ACTIVE_LOW, IPT_UNUSED)
PORT_BIT(0x04, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_NAME("/ ?") PORT_CODE(KEYCODE_SLASH) PORT_CHAR('/') PORT_CHAR('?')
PORT_BIT(0x08, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_NAME(", <") PORT_CODE(KEYCODE_COMMA) PORT_CHAR(',') PORT_CHAR('<')
PORT_BIT(0x10, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_NAME("N") PORT_CODE(KEYCODE_N) PORT_CHAR('n')
PORT_BIT(0x20, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_NAME("V") PORT_CODE(KEYCODE_V) PORT_CHAR('v')
PORT_BIT(0x40, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_NAME("X") PORT_CODE(KEYCODE_X) PORT_CHAR('x')
PORT_BIT(0x80, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_NAME("F1") PORT_CODE(KEYCODE_BACKSLASH) PORT_CHAR(UCHAR_MAMEKEY(F1))
PORT_START("switches")
PORT_BIT( 0x01, IP_ACTIVE_HIGH, IPT_KEYBOARD) PORT_NAME("RST") PORT_CODE(KEYCODE_LALT) PORT_CHANGED_MEMBER(DEVICE_SELF, aim65_state, reset_button, 0)
PORT_DIPNAME(0x08, 0x08, "KB/TTY") PORT_DIPLOCATION("S3:1")
PORT_DIPSETTING(0x00, "TTY")
PORT_DIPSETTING(0x08, "KB")
INPUT_PORTS_END
INPUT_CHANGED_MEMBER(aim65_state::reset_button)
{
// Reset all devices
// If you're using TTY, you must press DEL after the reset.
if (newval)
{
m_via0->reset();
m_via1->reset();
m_pia->reset();
m_riot->reset();
}
m_maincpu->set_input_line(INPUT_LINE_RESET, newval ? ASSERT_LINE : CLEAR_LINE);
}
void aim65_state::aim65_palette(palette_device &palette) const
{
palette.set_pen_color(0, rgb_t(0x20, 0x02, 0x05));
palette.set_pen_color(1, rgb_t(0xc0, 0x00, 0x00));
}
/***************************************************************************
MACHINE DRIVERS
***************************************************************************/
image_init_result aim65_state::load_cart(device_image_interface &image, generic_slot_device *slot, const char *slot_tag)
{
uint32_t size = slot->common_get_size(slot_tag);
if (size > 0x1000)
{
image.seterror(IMAGE_ERROR_UNSPECIFIED, "Unsupported ROM size");
return image_init_result::FAIL;
}
if (image.loaded_through_softlist() && image.get_software_region(slot_tag) == nullptr)
{
std::string errmsg = string_format(
"Attempted to load file with wrong extension\nSocket '%s' only accepts files with '.%s' extension",
slot_tag, slot_tag);
image.seterror(IMAGE_ERROR_UNSPECIFIED, errmsg.c_str());
return image_init_result::FAIL;
}
slot->rom_alloc(size, GENERIC_ROM8_WIDTH, ENDIANNESS_LITTLE);
slot->common_load_rom(slot->get_rom_base(), size, slot_tag);
return image_init_result::PASS;
}
// TTY terminal settings. To use, turn KB/TTY switch to TTY, reset, press DEL. All input to be in UPPERCASE.
static DEVICE_INPUT_DEFAULTS_START( serial_term )
DEVICE_INPUT_DEFAULTS( "RS232_TXBAUD", 0xff, RS232_BAUD_1200 )
DEVICE_INPUT_DEFAULTS( "RS232_RXBAUD", 0xff, RS232_BAUD_1200 )
DEVICE_INPUT_DEFAULTS( "RS232_STARTBITS", 0xff, RS232_STARTBITS_1 )
DEVICE_INPUT_DEFAULTS( "RS232_DATABITS", 0xff, RS232_DATABITS_7 )
DEVICE_INPUT_DEFAULTS( "RS232_PARITY", 0xff, RS232_PARITY_ODD )
DEVICE_INPUT_DEFAULTS( "RS232_STOPBITS", 0xff, RS232_STOPBITS_1 )
DEVICE_INPUT_DEFAULTS_END
void aim65_state::aim65(machine_config &config)
{
/* basic machine hardware */
M6502(config, m_maincpu, AIM65_CLOCK); /* 1 MHz */
m_maincpu->set_addrmap(AS_PROGRAM, &aim65_state::mem_map);
config.set_default_layout(layout_aim65);
/* alpha-numeric display */
DL1416T(config, m_ds[0], u32(0));
m_ds[0]->update().set(FUNC(aim65_state::update_ds<1>));
DL1416T(config, m_ds[1], u32(0));
m_ds[1]->update().set(FUNC(aim65_state::update_ds<2>));
DL1416T(config, m_ds[2], u32(0));
m_ds[2]->update().set(FUNC(aim65_state::update_ds<3>));
DL1416T(config, m_ds[3], u32(0));
m_ds[3]->update().set(FUNC(aim65_state::update_ds<4>));
DL1416T(config, m_ds[4], u32(0));
m_ds[4]->update().set(FUNC(aim65_state::update_ds<5>));
// pseudo-"screen" for the thermal printer. Index 0.
screen_device &screen(SCREEN(config, "screen", SCREEN_TYPE_RASTER));
screen.set_refresh_hz(60);
screen.set_vblank_time(ATTOSECONDS_IN_USEC(2500)); /* not accurate */
screen.set_screen_update(FUNC(aim65_state::screen_update));
screen.set_size(160, 200);
screen.set_visarea_full();
screen.set_palette("palette");
PALETTE(config, m_palette, FUNC(aim65_state::aim65_palette), 2);
/* Sound - wave sound only */
SPEAKER(config, "mono").front_center();
/* other devices */
MOS6532_NEW(config, m_riot, AIM65_CLOCK);
m_riot->pa_wr_callback().set([this] (u8 data) { m_riot_port_a = data; });
m_riot->pb_rd_callback().set([this] () { return aim65_state::z33_pb_r(); });
m_riot->irq_wr_callback().set_inputline(m_maincpu, M6502_IRQ_LINE);
VIA6522(config, m_via0, AIM65_CLOCK);
m_via0->readpb_handler().set([this] () { return aim65_state::z32_pb_r(); });
m_via0->writepa_handler().set([this] (u8 data) { aim65_state::z32_pa_w(data); });
m_via0->writepb_handler().set([this] (u8 data) { aim65_state::z32_pb_w(data); });
// in CA1 printer ready?
// out CA2 cass control (H=in)
m_via0->ca2_handler().set([this] (bool state) { m_ca2 = state; });
// out CB1 printer start
//m_via0->cb1_handler().set(FUNC(aim65_state::z32_cb1_w));
// out CB2 turn printer on
m_via0->cb2_handler().set([this] (bool state) { aim65_state::z32_cb2_w(state); });
m_via0->irq_handler().set_inputline(m_maincpu, M6502_IRQ_LINE);
VIA6522(config, m_via1, AIM65_CLOCK);
m_via1->irq_handler().set_inputline(m_maincpu, M6502_IRQ_LINE);
PIA6821(config, m_pia, 0);
m_pia->writepa_handler().set([this] (u8 data) { aim65_state::u1_pa_w(data); });
m_pia->writepb_handler().set([this] (u8 data) { aim65_state::u1_pb_w(data); });
CASSETTE(config, m_cassette1);
m_cassette1->set_default_state(CASSETTE_PLAY | CASSETTE_MOTOR_DISABLED | CASSETTE_SPEAKER_ENABLED);
m_cassette1->add_route(ALL_OUTPUTS, "mono", 0.1);
CASSETTE(config, m_cassette2);
m_cassette2->set_default_state(CASSETTE_PLAY | CASSETTE_MOTOR_DISABLED | CASSETTE_SPEAKER_ENABLED);
m_cassette2->add_route(ALL_OUTPUTS, "mono", 0.1);
// Screen for TTY interface. Index 1.
RS232_PORT(config, m_rs232, default_rs232_devices, "terminal");
//m_rs232->rxd_handler().set(m_via0, FUNC(via6522_device::write_pb6)); // function disabled in 6522via.cpp
m_rs232->set_option_device_input_defaults("terminal", DEVICE_INPUT_DEFAULTS_NAME(serial_term));
GENERIC_SOCKET(config, "z26", generic_plain_slot, "aim65_z26_cart", "z26").set_device_load(FUNC(aim65_state::z26_load));
GENERIC_SOCKET(config, "z25", generic_plain_slot, "aim65_z25_cart", "z25").set_device_load(FUNC(aim65_state::z25_load));
GENERIC_SOCKET(config, "z24", generic_plain_slot, "aim65_z24_cart", "z24").set_device_load(FUNC(aim65_state::z24_load));
/* PROM/ROM module sockets */
GENERIC_SOCKET(config, "z12", generic_plain_slot, "rm65_z12_cart", "z12").set_device_load(FUNC(aim65_state::z12_load));
GENERIC_SOCKET(config, "z13", generic_plain_slot, "rm65_z13_cart", "z13").set_device_load(FUNC(aim65_state::z13_load));
GENERIC_SOCKET(config, "z14", generic_plain_slot, "rm65_z14_cart", "z14").set_device_load(FUNC(aim65_state::z14_load));
GENERIC_SOCKET(config, "z15", generic_plain_slot, "rm65_z15_cart", "z15").set_device_load(FUNC(aim65_state::z15_load));
/* internal ram */
RAM(config, RAM_TAG).set_default_size("4K").set_extra_options("1K,2K,3K");
/* Software lists */
SOFTWARE_LIST(config, "cart_list").set_original("aim65_cart");
}
/***************************************************************************
ROM DEFINITIONS
***************************************************************************/
ROM_START( aim65 )
ROM_REGION(0x10000, "maincpu", 0)
ROM_SYSTEM_BIOS(0, "aim65", "Rockwell AIM-65")
ROMX_LOAD("aim65mon.z23", 0xe000, 0x1000, CRC(90e44afe) SHA1(78e38601edf6bfc787b58750555a636b0cf74c5c), ROM_BIOS(0))
ROMX_LOAD("aim65mon.z22", 0xf000, 0x1000, CRC(d01914b0) SHA1(e5b5ddd4cd43cce073a718ee4ba5221f2bc84eaf), ROM_BIOS(0))
ROM_SYSTEM_BIOS(1, "dynatem", "Dynatem AIM-65")
ROMX_LOAD("dynaim65.z23", 0xe000, 0x1000, CRC(90e44afe) SHA1(78e38601edf6bfc787b58750555a636b0cf74c5c), ROM_BIOS(1))
ROMX_LOAD("dynaim65.z22", 0xf000, 0x1000, CRC(83e1c6e7) SHA1(444134043edd83385bd70434cb100269901c4417), ROM_BIOS(1))
ROM_END
/* Currently dumped and available software:
*
* Name Loc CRC32 SHA1
* ------------------------------------------------------------------------
* Assembler Z24 0878b399 483e92b57d64be51643a9f6490521a8572aa2f68
* Basic V1.1 Z25 d7b42d2a 4bbdb28d332429825adea0266ed9192786d9e392
* Basic V1.1 Z26 36a61f39 f5ce0126cb594a565e730973fd140d03c298cefa
* Forth V1.3 Z25 0671d019 dd2a1613e435c833634100cf4a22c6cff70c7a26
* Forth V1.3 Z26 a80ad472 42a2e8c86829a2fe48090e6665ff9fe25b12b070
* Mathpack Z24 4889af55 5e9541ddfc06e3802d09b30d1bd89c5da914c76e
* Monitor Z22 d01914b0 e5b5ddd4cd43cce073a718ee4ba5221f2bc84eaf
* Monitor Z23 90e44afe 78e38601edf6bfc787b58750555a636b0cf74c5c
* Monitor Dynatem Z22 83e1c6e7 444134043edd83385bd70434cb100269901c4417
* PL/65 V1.0 Z25 76dcf864 e937c54ed109401f796640cd45b27dfefb76667e
* PL/65 V1.0 Z26 2ac71abd 6df5e3125bebefac80d51d9337555f54bdf0d8ea
*
*/
/***************************************************************************
GAME DRIVERS
***************************************************************************/
// YEAR NAME PARENT COMPAT MACHINE INPUT CLASS INIT COMPANY FULLNAME FLAGS
COMP(1977, aim65, 0, 0, aim65, aim65, aim65_state, empty_init, "Rockwell", "AIM 65", MACHINE_SUPPORTS_SAVE | MACHINE_NO_SOUND_HW)