// license:BSD-3-Clause
// copyright-holders:Nicola Salmoria
/***************************************************************************
This code is used by the following module:
timeplt.cpp
pooyan.cpp
rallyx.cpp (for locomotn)
tutankhm.cpp
rocnrope.cpp
***************************************************************************/
#include "emu.h"
#include "audio/timeplt.h"
#include "machine/gen_latch.h"
#include "speaker.h"
DEFINE_DEVICE_TYPE(TIMEPLT_AUDIO, timeplt_audio_device, "timplt_audio", "Time Pilot Audio")
DEFINE_DEVICE_TYPE(LOCOMOTN_AUDIO, locomotn_audio_device, "locomotn_audio", "Loco-Motion Audio")
timeplt_audio_device::timeplt_audio_device(const machine_config &mconfig, const char *tag, device_t *owner, uint32_t clock)
: timeplt_audio_device(mconfig, TIMEPLT_AUDIO, tag, owner, clock)
{
}
locomotn_audio_device::locomotn_audio_device(const machine_config &mconfig, const char *tag, device_t *owner, uint32_t clock)
: timeplt_audio_device(mconfig, LOCOMOTN_AUDIO, tag, owner, clock)
{
}
timeplt_audio_device::timeplt_audio_device(const machine_config &mconfig, device_type type, const char *tag, device_t *owner, uint32_t clock)
: device_t(mconfig, type, tag, owner, clock)
, m_soundcpu(*this, "tpsound")
, m_soundlatch(*this, "soundlatch")
, m_filter_0(*this, "filter.0.%u", 0)
, m_filter_1(*this, "filter.1.%u", 0)
, m_last_irq_state(0)
{
}
//-------------------------------------------------
// device_start - device-specific startup
//-------------------------------------------------
void timeplt_audio_device::device_start()
{
m_last_irq_state = 0;
save_item(NAME(m_last_irq_state));
}
/*************************************
*
* Sound timer
*
*************************************/
/* The timer clock which feeds the upper 4 bits of */
/* AY-3-8910 port A is based on the same clock */
/* feeding the sound CPU Z80. It is a divide by */
/* 5120, formed by a standard divide by 512, */
/* followed by a divide by 10 using a 4 bit */
/* bi-quinary count sequence. (See LS90 data sheet */
/* for an example). */
/* */
/* Bit 4 comes from the output of the divide by 1024 */
/* 0, 1, 0, 1, 0, 1, 0, 1, 0, 1 */
/* Bit 5 comes from the QC output of the LS90 producing a sequence of */
/* 0, 0, 1, 1, 0, 0, 1, 1, 1, 0 */
/* Bit 6 comes from the QD output of the LS90 producing a sequence of */
/* 0, 0, 0, 0, 1, 0, 0, 0, 0, 1 */
/* Bit 7 comes from the QA output of the LS90 producing a sequence of */
/* 0, 0, 0, 0, 0, 1, 1, 1, 1, 1 */
uint8_t timeplt_audio_device::portB_r()
{
static const int timeplt_timer[10] =
{
0x00, 0x10, 0x20, 0x30, 0x40, 0x90, 0xa0, 0xb0, 0xa0, 0xd0
};
return timeplt_timer[(m_soundcpu->total_cycles() / 512) % 10];
}
/*************************************
*
* Filter controls
*
*************************************/
void timeplt_audio_device::set_filter(filter_rc_device &device, int data)
{
int C = 0;
if (data & 1)
C += 220000; /* 220000pF = 0.220uF */
if (data & 2)
C += 47000; /* 47000pF = 0.047uF */
device.filter_rc_set_RC(filter_rc_device::LOWPASS, 1000, 5100, 0, CAP_P(C));
}
void timeplt_audio_device::filter_w(offs_t offset, uint8_t data)
{
set_filter(*m_filter_1[0], (offset >> 0) & 3);
set_filter(*m_filter_1[1], (offset >> 2) & 3);
set_filter(*m_filter_1[2], (offset >> 4) & 3);
set_filter(*m_filter_0[0], (offset >> 6) & 3);
set_filter(*m_filter_0[1], (offset >> 8) & 3);
set_filter(*m_filter_0[2], (offset >> 10) & 3);
}
/*************************************
*
* External interfaces
*
*************************************/
void timeplt_audio_device::sound_data_w(uint8_t data)
{
m_soundlatch->write(data);
}
WRITE_LINE_MEMBER(timeplt_audio_device::sh_irqtrigger_w)
{
if (m_last_irq_state == 0 && state)
{
/* setting bit 0 low then high triggers IRQ on the sound CPU */
m_soundcpu->set_input_line_and_vector(0, HOLD_LINE, 0xff); // Z80
}
m_last_irq_state = state;
}
WRITE_LINE_MEMBER(timeplt_audio_device::mute_w)
{
// controls pin 6 (DC audio mute) of LA4460 amplifier
machine().sound().system_mute(state);
}
/*************************************
*
* Memory maps
*
*************************************/
void timeplt_audio_device::timeplt_sound_map(address_map &map)
{
map(0x0000, 0x2fff).rom();
map(0x3000, 0x33ff).mirror(0x0c00).ram();
map(0x4000, 0x4000).mirror(0x0fff).rw("ay1", FUNC(ay8910_device::data_r), FUNC(ay8910_device::data_w));
map(0x5000, 0x5000).mirror(0x0fff).w("ay1", FUNC(ay8910_device::address_w));
map(0x6000, 0x6000).mirror(0x0fff).rw("ay2", FUNC(ay8910_device::data_r), FUNC(ay8910_device::data_w));
map(0x7000, 0x7000).mirror(0x0fff).w("ay2", FUNC(ay8910_device::address_w));
map(0x8000, 0xffff).w(FUNC(timeplt_audio_device::filter_w));
}
void locomotn_audio_device::locomotn_sound_map(address_map &map)
{
map(0x0000, 0x1fff).rom();
map(0x2000, 0x23ff).mirror(0x0c00).ram();
map(0x3000, 0x3fff).w(FUNC(locomotn_audio_device::filter_w));
map(0x4000, 0x4000).mirror(0x0fff).rw("ay1", FUNC(ay8910_device::data_r), FUNC(ay8910_device::data_w));
map(0x5000, 0x5000).mirror(0x0fff).w("ay1", FUNC(ay8910_device::address_w));
map(0x6000, 0x6000).mirror(0x0fff).rw("ay2", FUNC(ay8910_device::data_r), FUNC(ay8910_device::data_w));
map(0x7000, 0x7000).mirror(0x0fff).w("ay2", FUNC(ay8910_device::address_w));
}
/*************************************
*
* Machine drivers
*
*************************************/
void timeplt_audio_device::device_add_mconfig(machine_config &config)
{
/* basic machine hardware */
Z80(config, m_soundcpu, DERIVED_CLOCK(1, 8));
m_soundcpu->set_addrmap(AS_PROGRAM, &timeplt_audio_device::timeplt_sound_map);
/* sound hardware */
SPEAKER(config, "mono").front_center();
GENERIC_LATCH_8(config, m_soundlatch);
ay8910_device &ay1(AY8910(config, "ay1", DERIVED_CLOCK(1, 8)));
ay1.port_a_read_callback().set(m_soundlatch, FUNC(generic_latch_8_device::read));
ay1.port_b_read_callback().set(FUNC(timeplt_audio_device::portB_r));
ay1.add_route(0, "filter.0.0", 0.60);
ay1.add_route(1, "filter.0.1", 0.60);
ay1.add_route(2, "filter.0.2", 0.60);
ay8910_device &ay2(AY8910(config, "ay2", DERIVED_CLOCK(1, 8)));
ay2.add_route(0, "filter.1.0", 0.60);
ay2.add_route(1, "filter.1.1", 0.60);
ay2.add_route(2, "filter.1.2", 0.60);
for (required_device<filter_rc_device> &filter : m_filter_0)
FILTER_RC(config, filter).add_route(ALL_OUTPUTS, "mono", 1.0);
for (required_device<filter_rc_device> &filter : m_filter_1)
FILTER_RC(config, filter).add_route(ALL_OUTPUTS, "mono", 1.0);
}
void locomotn_audio_device::device_add_mconfig(machine_config &config)
{
timeplt_audio_device::device_add_mconfig(config);
/* basic machine hardware */
m_soundcpu->set_addrmap(AS_PROGRAM, &locomotn_audio_device::locomotn_sound_map);
}