// license:BSD-3-Clause
// copyright-holders:Bryan McPhail, Aaron Giles, R. Belmont, Philip Bennett
/***************************************************************************
Taito Ensoniq ES5505-based sound hardware
TODO:
* ES5510 ESP emulation is not perfect
* ES5510 Input Clock and ES5505 Output channels are same in other PCBs?
(Currently these are verified from Gun Buster schematics)
* Where does the MB8421 go? Taito F3 (and Super Chase) have 2 of them on
the sound area, Taito JC has one.
****************************************************************************/
#include "emu.h"
#include "taito_en.h"
#include <algorithm>
DEFINE_DEVICE_TYPE(TAITO_EN, taito_en_device, "taito_en", "Taito Ensoniq Sound System")
taito_en_device::taito_en_device(const machine_config &mconfig, const char *tag, device_t *owner, uint32_t clock)
: device_t(mconfig, TAITO_EN, tag, owner, clock)
, device_mixer_interface(mconfig, *this, 2)
, m_audiocpu(*this, "audiocpu")
, m_ensoniq(*this, "ensoniq")
, m_esp(*this, "esp")
, m_pump(*this, "pump")
, m_duart68681(*this, "duart68681")
, m_mb87078(*this, "mb87078")
, m_osram(*this, "osram")
, m_otisbank(*this, "otisbank")
, m_otisrom(*this, "ensoniq")
, m_osrom(*this, "audiocpu")
, m_cpubank(*this, "cpubank%u", 1)
{
}
//-------------------------------------------------
// device_start - device-specific startup
//-------------------------------------------------
void taito_en_device::device_start()
{
// tell the pump about the ESP chips
uint8_t *ROM = m_osrom->base();
uint32_t max = (m_osrom->bytes() - 0x100000) / 0x20000;
for (int i = 0; i < 3; i++)
m_cpubank[i]->configure_entries(0, max, &ROM[0x100000], 0x20000);
m_bankmask = ((m_otisrom.bytes()) / 0x200000) - 1;
// initialize precalculated ES5505 bank table
const size_t otisbank_size = m_otisbank.bytes() / 2;
m_calculated_otisbank = make_unique_clear<offs_t[]>(otisbank_size);
save_item(NAME(m_old_clock));
save_pointer(NAME(m_calculated_otisbank), otisbank_size);
}
//-------------------------------------------------
// device_reset - device-specific reset
//-------------------------------------------------
void taito_en_device::device_reset()
{
/* Sound cpu program loads to 0xc00000 so we use a bank */
uint32_t max = (m_osrom->bytes() - 0x100000) / 0x20000;
for (int i = 0; i < 3; i++)
m_cpubank[i]->set_entry(i % max);
uint16_t *ROM = (uint16_t *)m_osrom->base();
std::copy(&ROM[0x80000], &ROM[0x80004], &m_osram[0]); /* Stack and Reset vectors */
}
/*************************************
*
* Handlers
*
*************************************/
void taito_en_device::en_es5505_bank_w(offs_t offset, uint16_t data)
{
/* mask out unused bits */
m_otisbank[offset] = data;
m_calculated_otisbank[offset] = (m_otisbank[offset] & m_bankmask) << 20;
}
void taito_en_device::en_volume_w(offs_t offset, uint8_t data)
{
m_mb87078->data_w(offset ^ 1, data);
}
/*************************************
*
* 68000 memory map
*
*************************************/
void taito_en_device::en_sound_map(address_map &map)
{
map(0x000000, 0x00ffff).ram().mirror(0x30000).share("osram");
map(0x140000, 0x140fff).rw("dpram", FUNC(mb8421_device::right_r), FUNC(mb8421_device::right_w)).umask16(0xff00);
map(0x200000, 0x20001f).rw("ensoniq", FUNC(es5505_device::read), FUNC(es5505_device::write));
map(0x260000, 0x2601ff).rw("esp", FUNC(es5510_device::host_r), FUNC(es5510_device::host_w)).umask16(0x00ff);
map(0x280000, 0x28001f).rw("duart68681", FUNC(mc68681_device::read), FUNC(mc68681_device::write)).umask16(0x00ff);
map(0x300000, 0x30003f).w(FUNC(taito_en_device::en_es5505_bank_w)).share("otisbank");
map(0x340000, 0x340003).w(FUNC(taito_en_device::en_volume_w)).umask16(0xff00);
map(0xc00000, 0xc1ffff).bankr("cpubank1");
map(0xc20000, 0xc3ffff).bankr("cpubank2");
map(0xc40000, 0xc7ffff).bankr("cpubank3");
map(0xff0000, 0xffffff).ram().share("osram"); // mirror
}
void taito_en_device::fc7_map(address_map &map)
{
map(0xfffffd, 0xfffffd).r(m_duart68681, FUNC(mc68681_device::get_irq_vector));
}
/*************************************
*
* ES5505 memory map
*
*************************************/
void taito_en_device::en_otis_map(address_map &map)
{
map(0x000000, 0x0fffff).lr16(
[this](offs_t offset) -> u16 { return m_otisrom[(m_calculated_otisbank[m_ensoniq->get_voice_index()] + offset) & m_otisrom.mask()]; }, "banked_otisrom");
}
/*************************************
*
* MB87078 callback
*
*************************************/
void taito_en_device::mb87078_gain_changed(offs_t offset, uint8_t data)
{
if (offset > 1)
{
// TODO : ES5505 Volume control is correct?
m_ensoniq->set_output_gain(offset & 1, data / 32.0);
m_ensoniq->set_output_gain(2|(offset & 1), data / 32.0);
m_ensoniq->set_output_gain(4|(offset & 1), data / 32.0);
m_ensoniq->set_output_gain(6|(offset & 1), data / 32.0);
m_pump->set_output_gain(offset & 1, data / 32.0);
}
}
/*************************************
*
* ES5510 callback
*
*************************************/
void taito_en_device::es5505_clock_changed(u32 data)
{
if (m_old_clock != data)
{
m_pump->set_unscaled_clock(data);
m_old_clock = data;
}
}
/*************************************
*
* Device interfaces
*
*************************************/
/*
68681 I/O pin assignments
(according to Gun Buster schematics):
IP0: 5V OP0-OP5: N/C
IP1: 5V OP6: ESPHALT
IP2: 1MHz OP7: N/C
IP3: 0.5MHz
IP4: 0.5MHz
IP5: 1MHz
*/
void taito_en_device::duart_output(uint8_t data)
{
if (data & 0x40)
{
if (!m_pump->get_esp_halted())
{
logerror("Asserting ESPHALT\n");
m_pump->set_esp_halted(true);
}
}
else
{
if (m_pump->get_esp_halted())
{
logerror("Clearing ESPHALT\n");
m_pump->set_esp_halted(false);
}
}
}
//-------------------------------------------------
// device_add_mconfig - add device configuration
//-------------------------------------------------
void taito_en_device::device_add_mconfig(machine_config &config)
{
/* basic machine hardware */
M68000(config, m_audiocpu, XTAL(30'476'180) / 2);
m_audiocpu->set_addrmap(AS_PROGRAM, &taito_en_device::en_sound_map);
m_audiocpu->set_addrmap(m68000_device::AS_CPU_SPACE, &taito_en_device::fc7_map);
ES5510(config, m_esp, XTAL(10'000'000)); // from Gun Buster schematics
m_esp->set_disable();
MC68681(config, m_duart68681, XTAL(16'000'000) / 4);
m_duart68681->set_clocks(XTAL(16'000'000)/2/8, XTAL(16'000'000)/2/16, XTAL(16'000'000)/2/16, XTAL(16'000'000)/2/8);
m_duart68681->irq_cb().set_inputline(m_audiocpu, M68K_IRQ_6);
m_duart68681->outport_cb().set(FUNC(taito_en_device::duart_output));
MB87078(config, m_mb87078);
m_mb87078->gain_changed().set(FUNC(taito_en_device::mb87078_gain_changed));
MB8421(config, "dpram", 0); // host accesses this from the other side
/* sound hardware */
ESQ_5505_5510_PUMP(config, m_pump, XTAL(30'476'180) / (2 * 16 * 32));
m_pump->set_esp(m_esp);
m_pump->add_route(0, *this, 0.5, AUTO_ALLOC_INPUT, 0);
m_pump->add_route(1, *this, 0.5, AUTO_ALLOC_INPUT, 1);
ES5505(config, m_ensoniq, XTAL(30'476'180) / 2);
m_ensoniq->sample_rate_changed().set(FUNC(taito_en_device::es5505_clock_changed));
m_ensoniq->set_addrmap(0, &taito_en_device::en_otis_map);
m_ensoniq->set_addrmap(1, &taito_en_device::en_otis_map);
m_ensoniq->set_channels(4);
m_ensoniq->add_route(0, "pump", 0.18, 0);
m_ensoniq->add_route(1, "pump", 0.18, 1);
m_ensoniq->add_route(2, "pump", 0.18, 2);
m_ensoniq->add_route(3, "pump", 0.18, 3);
m_ensoniq->add_route(4, "pump", 0.18, 4);
m_ensoniq->add_route(5, "pump", 0.18, 5);
m_ensoniq->add_route(6, "pump", 0.18, 6);
m_ensoniq->add_route(7, "pump", 0.18, 7);
}