// license:BSD-3-Clause
// copyright-holders:Aaron Giles, Nathan Woods
/**********************************************************************
Motorola 6821 PIA interface and emulation
**********************************************************************/
#include "emu.h"
#include "6821pia.h"
//**************************************************************************
// MACROS
//**************************************************************************
#define LOG_GENERAL 0x01
#define LOG_SETUP 0x02
#define LOG_CA1 0x08
//#define VERBOSE (LOG_SETUP | LOG_GENERAL)
#include "logmacro.h"
#define LOGSETUP(...) LOGMASKED(LOG_SETUP, __VA_ARGS__)
#define LOGCA1(...) LOGMASKED(LOG_CA1, __VA_ARGS__)
#define PIA_IRQ1 (0x80)
#define PIA_IRQ2 (0x40)
//**************************************************************************
// LIVE DEVICE
//**************************************************************************
// device type definition
DEFINE_DEVICE_TYPE(PIA6821, pia6821_device, "pia6821", "6821 PIA")
//-------------------------------------------------
// pia6821_device - constructor
//-------------------------------------------------
pia6821_device::pia6821_device(const machine_config &mconfig, const char *tag, device_t *owner, uint32_t clock)
: device_t(mconfig, PIA6821, tag, owner, clock),
m_in_a_handler(*this),
m_in_b_handler(*this),
m_in_ca1_handler(*this),
m_in_cb1_handler(*this),
m_in_ca2_handler(*this),
m_out_a_handler(*this),
m_out_b_handler(*this),
m_ca2_handler(*this),
m_cb2_handler(*this),
m_irqa_handler(*this),
m_irqb_handler(*this), m_in_a(0),
m_in_ca1(0), m_in_ca2(0), m_out_a(0), m_out_ca2(0), m_ddr_a(0),
m_ctl_a(0), m_irq_a1(0), m_irq_a2(0),
m_irq_a_state(0), m_in_b(0),
m_in_cb1(0), m_in_cb2(0), m_out_b(0), m_out_cb2(0), m_last_out_cb2_z(0), m_ddr_b(0),
m_ctl_b(0), m_irq_b1(0), m_irq_b2(0),
m_irq_b_state(0), m_in_a_pushed(false), m_out_a_needs_pulled(false), m_in_ca1_pushed(false),
m_in_ca2_pushed(false), m_out_ca2_needs_pulled(false), m_in_b_pushed(false), m_out_b_needs_pulled(false),
m_in_cb1_pushed(false), m_in_cb2_pushed(false), m_out_cb2_needs_pulled(false), m_logged_port_a_not_connected(false),
m_logged_port_b_not_connected(false), m_logged_ca1_not_connected(false), m_logged_ca2_not_connected(false),
m_logged_cb1_not_connected(false), m_logged_cb2_not_connected(false)
{
}
//-------------------------------------------------
// device_start - device-specific startup
//-------------------------------------------------
void pia6821_device::device_start()
{
// resolve callbacks
m_in_a_handler.resolve();
m_in_b_handler.resolve();
m_in_ca1_handler.resolve();
m_in_cb1_handler.resolve();
m_in_ca2_handler.resolve();
m_out_a_handler.resolve();
m_out_b_handler.resolve();
m_ca2_handler.resolve();
m_cb2_handler.resolve();
m_irqa_handler.resolve_safe();
m_irqb_handler.resolve_safe();
save_item(NAME(m_in_a));
save_item(NAME(m_in_ca1));
save_item(NAME(m_in_ca2));
save_item(NAME(m_out_a));
save_item(NAME(m_out_ca2));
save_item(NAME(m_ddr_a));
save_item(NAME(m_ctl_a));
save_item(NAME(m_irq_a1));
save_item(NAME(m_irq_a2));
save_item(NAME(m_irq_a_state));
save_item(NAME(m_in_b));
save_item(NAME(m_in_cb1));
save_item(NAME(m_in_cb2));
save_item(NAME(m_out_b));
save_item(NAME(m_out_cb2));
save_item(NAME(m_last_out_cb2_z));
save_item(NAME(m_ddr_b));
save_item(NAME(m_ctl_b));
save_item(NAME(m_irq_b1));
save_item(NAME(m_irq_b2));
save_item(NAME(m_irq_b_state));
save_item(NAME(m_in_a_pushed));
save_item(NAME(m_out_a_needs_pulled));
save_item(NAME(m_in_ca1_pushed));
save_item(NAME(m_in_ca2_pushed));
save_item(NAME(m_out_ca2_needs_pulled));
save_item(NAME(m_in_b_pushed));
save_item(NAME(m_out_b_needs_pulled));
save_item(NAME(m_in_cb1_pushed));
save_item(NAME(m_in_cb2_pushed));
save_item(NAME(m_out_cb2_needs_pulled));
}
//-------------------------------------------------
// device_reset - device-specific reset
//-------------------------------------------------
void pia6821_device::device_reset()
{
//
// set default read values.
//
// ports A,CA1,CA2 default to 1
// ports B,CB1,CB2 are three-state and undefined (set to 0)
//
m_in_a = 0xff;
m_in_ca1 = true;
m_in_ca2 = true;
m_out_a = 0;
m_out_ca2 = 0;
m_ddr_a = 0;
m_ctl_a = 0;
m_irq_a1 = 0;
m_irq_a2 = 0;
m_irq_a_state = 0;
m_in_b = 0;
m_in_cb1 = 0;
m_in_cb2 = 0;
m_out_b = 0;
m_out_cb2 = 0;
m_last_out_cb2_z = 0;
m_ddr_b = 0;
m_ctl_b = 0;
m_irq_b1 = 0;
m_irq_b2 = 0;
m_irq_b_state = 0;
m_in_a_pushed = false;
m_out_a_needs_pulled = false;
m_in_ca1_pushed = false;
m_in_ca2_pushed = false;
m_out_ca2_needs_pulled = false;
m_in_b_pushed = false;
m_out_b_needs_pulled = false;
m_in_cb1_pushed = false;
m_in_cb2_pushed = false;
m_out_cb2_needs_pulled = false;
m_logged_port_a_not_connected = false;
m_logged_port_b_not_connected = false;
m_logged_ca1_not_connected = false;
m_logged_ca2_not_connected = false;
m_logged_cb1_not_connected = false;
m_logged_cb2_not_connected = false;
// clear the IRQs
m_irqa_handler(false);
m_irqb_handler(false);
}
//-------------------------------------------------
// update_interrupts
//-------------------------------------------------
void pia6821_device::update_interrupts()
{
// start with IRQ A
int new_state = (m_irq_a1 && irq1_enabled(m_ctl_a)) || (m_irq_a2 && irq2_enabled(m_ctl_a));
if (new_state != m_irq_a_state)
{
m_irq_a_state = new_state;
m_irqa_handler(m_irq_a_state);
}
// then do IRQ B
new_state = (m_irq_b1 && irq1_enabled(m_ctl_b)) || (m_irq_b2 && irq2_enabled(m_ctl_b));
if (new_state != m_irq_b_state)
{
m_irq_b_state = new_state;
m_irqb_handler(m_irq_b_state);
}
}
//-------------------------------------------------
// get_in_a_value
//-------------------------------------------------
uint8_t pia6821_device::get_in_a_value()
{
uint8_t port_a_data = 0;
uint8_t ret;
// update the input
if (!m_in_a_handler.isnull())
{
port_a_data = m_in_a_handler(0);
}
else
{
if (m_in_a_pushed)
{
port_a_data = m_in_a;
}
else
{
// assume pins are disconnected and simulate the internal pullups.
port_a_data = 0xff;
if (!m_logged_port_a_not_connected && (m_ddr_a != 0xff))
{
logerror("Warning! No port A read handler. Assuming pins 0x%02X not connected\n", m_ddr_a ^ 0xff);
m_logged_port_a_not_connected = true;
}
}
}
// For port A, when the port is in output mode other devices can drive the
// pins too. If the device pulls the voltage on the lines enough,a read of
// the output register will show the external device value on the driven pins.
ret = (~m_ddr_a & port_a_data) // input pins
| (m_ddr_a & m_out_a & ~m_a_input_overrides_output_mask) // normal output pins
| (m_ddr_a & port_a_data & m_a_input_overrides_output_mask); // overridden output pins
return ret;
}
//-------------------------------------------------
// get_in_b_value
//-------------------------------------------------
uint8_t pia6821_device::get_in_b_value()
{
uint8_t ret;
if (m_ddr_b == 0xff)
{
// all output, just return buffer
ret = m_out_b;
}
else
{
uint8_t port_b_data;
// update the input
if (!m_in_b_handler.isnull())
{
port_b_data = m_in_b_handler(0);
}
else
{
if (m_in_b_pushed)
{
port_b_data = m_in_b;
}
else
{
if (!m_logged_port_b_not_connected && (m_ddr_b != 0xff))
{
logerror("Error! No port B read handler. Three-state pins 0x%02X are undefined\n", m_ddr_b ^ 0xff);
m_logged_port_b_not_connected = true;
}
// undefined -- need to return something
port_b_data = 0x00;
}
}
// the DDR determines if the pin or the output buffer is read
ret = (m_out_b & m_ddr_b) | (port_b_data & ~m_ddr_b);
}
return ret;
}
//-------------------------------------------------
// get_out_a_value
//-------------------------------------------------
uint8_t pia6821_device::get_out_a_value()
{
uint8_t ret;
if (m_ddr_a == 0xff)
{
// all output
ret = m_out_a;
}
else
{
// input pins don't change
ret = (m_out_a & m_ddr_a) | (get_in_a_value() & ~m_ddr_a);
}
return ret;
}
//-------------------------------------------------
// get_out_b_value
//-------------------------------------------------
uint8_t pia6821_device::get_out_b_value()
{
// input pins are high-impedance - we just send them as zeros for backwards compatibility
return m_out_b & m_ddr_b;
}
//-------------------------------------------------
// set_out_ca2
//-------------------------------------------------
void pia6821_device::set_out_ca2(int data)
{
if (data != m_out_ca2)
{
m_out_ca2 = data;
// send to output function
if (!m_ca2_handler.isnull())
{
m_ca2_handler(m_out_ca2);
}
else
{
if (m_out_ca2_needs_pulled)
logerror("Warning! No port CA2 write handler. Previous value has been lost!\n");
m_out_ca2_needs_pulled = true;
}
}
}
//-------------------------------------------------
// set_out_cb2
//-------------------------------------------------
void pia6821_device::set_out_cb2(int data)
{
int z = cb2_output_z();
if ((data != m_out_cb2) || (z != m_last_out_cb2_z))
{
m_out_cb2 = data;
m_last_out_cb2_z = z;
// send to output function
if (!m_cb2_handler.isnull())
{
m_cb2_handler(m_out_cb2);
}
else
{
if (m_out_cb2_needs_pulled)
logerror("Warning! No port CB2 write handler. Previous value has been lost!\n");
m_out_cb2_needs_pulled = true;
}
}
}
//-------------------------------------------------
// port_a_r
//-------------------------------------------------
uint8_t pia6821_device::port_a_r()
{
uint8_t ret = get_in_a_value();
// IRQ flags implicitly cleared by a read
m_irq_a1 = false;
m_irq_a2 = false;
update_interrupts();
// CA2 is configured as output and in read strobe mode
if (c2_output(m_ctl_a) && c2_strobe_mode(m_ctl_a))
{
// this will cause a transition low
set_out_ca2(false);
// if the CA2 strobe is cleared by the E, reset it right away
if (strobe_e_reset(m_ctl_a))
set_out_ca2(true);
}
LOG("PIA port A read = %02X\n", ret);
return ret;
}
//-------------------------------------------------
// ddr_a_r
//-------------------------------------------------
uint8_t pia6821_device::ddr_a_r()
{
const uint8_t ret = m_ddr_a;
LOG("PIA DDR A read = %02X\n", ret);
return ret;
}
//-------------------------------------------------
// port_b_r
//-------------------------------------------------
uint8_t pia6821_device::port_b_r()
{
const uint8_t ret = get_in_b_value();
// This read will implicitly clear the IRQ B1 flag. If CB2 is in write-strobe
// mode with CB1 restore, and a CB1 active transition set the flag,
// clearing it will cause CB2 to go high again. Note that this is different
// from what happens with port A.
if (m_irq_b1 && c2_strobe_mode(m_ctl_b) && strobe_c1_reset(m_ctl_b))
set_out_cb2(true);
// IRQ flags implicitly cleared by a read
m_irq_b1 = false;
m_irq_b2 = false;
update_interrupts();
LOG("PIA port B read = %02X\n", ret);
return ret;
}
//-------------------------------------------------
// ddr_b_r
//-------------------------------------------------
uint8_t pia6821_device::ddr_b_r()
{
const uint8_t ret = m_ddr_b;
LOG("PIA DDR B read = %02X\n", ret);
return ret;
}
//-------------------------------------------------
// control_a_r
//-------------------------------------------------
uint8_t pia6821_device::control_a_r()
{
uint8_t ret;
// update CA1 & CA2 if callback exists, these in turn may update IRQ's
if (!m_in_ca1_handler.isnull())
{
ca1_w(m_in_ca1_handler());
}
else if(!m_logged_ca1_not_connected && (!m_in_ca1_pushed))
{
logerror("Warning! No CA1 read handler. Assuming pin not connected\n");
m_logged_ca1_not_connected = true;
}
if (!m_in_ca2_handler.isnull())
{
ca2_w(m_in_ca2_handler());
}
else if ( !m_logged_ca2_not_connected && c2_input(m_ctl_a) && !m_in_ca2_pushed)
{
logerror("Warning! No CA2 read handler. Assuming pin not connected\n");
m_logged_ca2_not_connected = true;
}
// read control register
ret = m_ctl_a;
// set the IRQ flags if we have pending IRQs
if (m_irq_a1)
ret |= PIA_IRQ1;
if (m_irq_a2 && c2_input(m_ctl_a))
ret |= PIA_IRQ2;
LOG("PIA control A read = %02X\n", ret);
return ret;
}
//-------------------------------------------------
// control_b_r
//-------------------------------------------------
uint8_t pia6821_device::control_b_r()
{
uint8_t ret;
// update CB1 & CB2 if callback exists, these in turn may update IRQ's
if(!m_in_cb1_handler.isnull())
{
cb1_w(m_in_cb1_handler());
}
else if(!m_logged_cb1_not_connected && !m_in_cb1_pushed)
{
logerror("Error! no CB1 read handler. Three-state pin is undefined\n");
m_logged_cb1_not_connected = true;
}
if(!m_logged_cb2_not_connected && c2_input(m_ctl_b) && !m_in_cb2_pushed)
{
logerror("Error! Three-state pin is undefined\n");
m_logged_cb2_not_connected = true;
}
// read control register
ret = m_ctl_b;
// set the IRQ flags if we have pending IRQs
if (m_irq_b1)
ret |= PIA_IRQ1;
if (m_irq_b2 && c2_input(m_ctl_b))
ret |= PIA_IRQ2;
LOG("PIA control B read = %02X\n", ret);
return ret;
}
//-------------------------------------------------
// read
//-------------------------------------------------
uint8_t pia6821_device::read(offs_t offset)
{
uint8_t ret;
switch (offset & 0x03)
{
default: // impossible
case 0x00:
ret = output_selected(m_ctl_a) ? port_a_r() : ddr_a_r();
break;
case 0x01:
ret = control_a_r();
break;
case 0x02:
ret = output_selected(m_ctl_b) ? port_b_r() : ddr_b_r();
break;
case 0x03:
ret = control_b_r();
break;
}
return ret;
}
//-------------------------------------------------
// send_to_out_a_func
//-------------------------------------------------
void pia6821_device::send_to_out_a_func(const char* message)
{
// input pins are pulled high
const uint8_t data = get_out_a_value();
LOG("PIA %s = %02X\n", message, data);
if (!m_out_a_handler.isnull())
{
m_out_a_handler(offs_t(0), data);
}
else
{
if (m_out_a_needs_pulled)
logerror("Warning! No port A write handler. Previous value has been lost!\n");
m_out_a_needs_pulled = true;
}
}
//-------------------------------------------------
// send_to_out_b_func
//-------------------------------------------------
void pia6821_device::send_to_out_b_func(const char* message)
{
// input pins are high-impedance - we just send them as zeros for backwards compatibility
const uint8_t data = get_out_b_value();
LOG("PIA %s = %02X\n", message, data);
if (!m_out_b_handler.isnull())
{
m_out_b_handler(offs_t(0), data);
}
else
{
if (m_out_b_needs_pulled)
logerror("Warning! No port B write handler. Previous value has been lost!\n");
m_out_b_needs_pulled = true;
}
}
//-------------------------------------------------
// port_a_w
//-------------------------------------------------
void pia6821_device::port_a_w(uint8_t data)
{
// buffer the output value
m_out_a = data;
send_to_out_a_func("port A write");
}
//-------------------------------------------------
// ddr_a_w
//-------------------------------------------------
void pia6821_device::ddr_a_w(uint8_t data)
{
LOGSETUP("PIA DDR A write = %02X (%s mode)\n", data, (0x00 == data) ? "input" : (0xff == data) ? "output" : "mixed");
if (m_ddr_a != data)
{
// DDR changed, call the callback again
m_ddr_a = data;
m_logged_port_a_not_connected = false;
send_to_out_a_func("port A write due to DDR change");
}
}
//-------------------------------------------------
// port_b_w
//-------------------------------------------------
void pia6821_device::port_b_w(uint8_t data)
{
// buffer the output value
m_out_b = data;
send_to_out_b_func("port B write");
// CB2 in write strobe mode
if (c2_strobe_mode(m_ctl_b))
{
// this will cause a transition low
set_out_cb2(false);
// if the CB2 strobe is cleared by the E, reset it right away
if (strobe_e_reset(m_ctl_b))
set_out_cb2(true);
}
}
//-------------------------------------------------
// ddr_b_w
//-------------------------------------------------
void pia6821_device::ddr_b_w(uint8_t data)
{
LOGSETUP("PIA DDR B write = %02X (%s mode)\n", data, (0x00 == data) ? "input" : (0xff == data) ? "output" : "mixed");
if (m_ddr_b != data)
{
// DDR changed, call the callback again
m_ddr_b = data;
m_logged_port_b_not_connected = false;
send_to_out_b_func("port B write due to DDR change");
}
}
//-------------------------------------------------
// control_a_w
//-------------------------------------------------
void pia6821_device::control_a_w(uint8_t data)
{
// bit 7 and 6 are read only
data &= 0x3f;
LOGSETUP("PIA control A write = %02X\n", data);
// update the control register
m_ctl_a = data;
// CA2 is configured as output
if (c2_output(m_ctl_a))
{
bool temp;
if (c2_set_mode(m_ctl_a))
temp = c2_set(m_ctl_a); // set/reset mode - bit value determines the new output
else
temp = true; // strobe mode - output is always high unless strobed
set_out_ca2(temp);
}
// update externals
update_interrupts();
}
//-------------------------------------------------
// control_b_w
//-------------------------------------------------
void pia6821_device::control_b_w(uint8_t data)
{
// bit 7 and 6 are read only
data &= 0x3f;
LOGSETUP("PIA control B write = %02X\n", data);
// update the control register
m_ctl_b = data;
bool temp;
if (c2_set_mode(m_ctl_b))
temp = c2_set(m_ctl_b); // set/reset mode - bit value determines the new output
else
temp = true; // strobe mode - output is always high unless strobed
set_out_cb2(temp);
// update externals
update_interrupts();
}
//-------------------------------------------------
// write
//-------------------------------------------------
void pia6821_device::write(offs_t offset, uint8_t data)
{
switch (offset & 0x03)
{
default: // impossible
case 0x00:
if (output_selected(m_ctl_a))
port_a_w(data);
else
ddr_a_w(data);
break;
case 0x01:
control_a_w( data);
break;
case 0x02:
if (output_selected(m_ctl_b))
port_b_w(data);
else
ddr_b_w(data);
break;
case 0x03:
control_b_w(data);
break;
}
}
//-------------------------------------------------
// set_a_input
//-------------------------------------------------
void pia6821_device::set_a_input(uint8_t data)
{
if (!m_in_a_handler.isnull())
throw emu_fatalerror("pia6821_device::set_a_input() called when m_in_a_handler set");
LOG("Set PIA input port A = %02X\n", data);
m_in_a = data;
m_in_a_pushed = true;
}
//-------------------------------------------------
// write_porta
//-------------------------------------------------
void pia6821_device::write_porta(uint8_t data)
{
set_a_input(data);
}
//-------------------------------------------------
// write_porta_line
//-------------------------------------------------
void pia6821_device::write_porta_line(int line, bool state)
{
const uint8_t mask = 1 << line;
if (state)
set_a_input(m_in_a | mask);
else
set_a_input(m_in_a & ~mask);
}
//-------------------------------------------------
// a_output
//-------------------------------------------------
uint8_t pia6821_device::a_output()
{
m_out_a_needs_pulled = false;
return get_out_a_value();
}
//-------------------------------------------------
// ca1_w
//-------------------------------------------------
WRITE_LINE_MEMBER( pia6821_device::ca1_w )
{
LOGCA1("Set PIA input CA1 = %d\n", state);
// the new state has caused a transition
if ((m_in_ca1 != state) && ((state && c1_low_to_high(m_ctl_a)) || (!state && c1_high_to_low(m_ctl_a))))
{
LOGCA1("CA1 triggering\n");
// mark the IRQ
m_irq_a1 = true;
// update externals
update_interrupts();
// CA2 is configured as output and in read strobe mode and cleared by a CA1 transition
if (c2_output(m_ctl_a) && c2_strobe_mode(m_ctl_a) && strobe_c1_reset(m_ctl_a))
set_out_ca2(true);
}
// set the new value for CA1
m_in_ca1 = state;
m_in_ca1_pushed = true;
}
//-------------------------------------------------
// ca2_w
//-------------------------------------------------
WRITE_LINE_MEMBER( pia6821_device::ca2_w )
{
LOG("Set PIA input CA2 = %d\n", state);
// if input mode and the new state has caused a transition
if (c2_input(m_ctl_a) && (m_in_ca2 != state) && ((state && c2_low_to_high(m_ctl_a)) || (!state && c2_high_to_low(m_ctl_a))))
{
LOG("CA2 triggering\n");
// mark the IRQ
m_irq_a2 = true;
// update externals
update_interrupts();
}
// set the new value for CA2
m_in_ca2 = state;
m_in_ca2_pushed = true;
}
//-------------------------------------------------
// ca2_output
//-------------------------------------------------
bool pia6821_device::ca2_output()
{
m_out_ca2_needs_pulled = false;
return m_out_ca2;
}
//-------------------------------------------------
// ca2_output_z - version of ca2_output which
// takes account of internal pullup resistor
//-------------------------------------------------
bool pia6821_device::ca2_output_z()
{
m_out_ca2_needs_pulled = false;
// If it's an output, output the bit, if it's an input, it's pulled up
return m_out_ca2 | c2_input(m_ctl_a);
}
//-------------------------------------------------
// write_portb
//-------------------------------------------------
void pia6821_device::write_portb(uint8_t data)
{
if (!m_in_b_handler.isnull())
throw emu_fatalerror("pia6821_device::write_portb() called when in_b_func implemented");
LOG("Set PIA input port B = %02X\n", data);
m_in_b = data;
m_in_b_pushed = true;
}
//-------------------------------------------------
// write_portb_line
//-------------------------------------------------
void pia6821_device::write_portb_line(int line, bool state)
{
const uint8_t mask = 1 << line;
if (state)
write_portb(m_in_b | mask);
else
write_portb(m_in_b & ~mask);
}
//-------------------------------------------------
// b_output
//-------------------------------------------------
uint8_t pia6821_device::b_output()
{
m_out_b_needs_pulled = false;
return get_out_b_value();
}
//-------------------------------------------------
// cb1_w
//-------------------------------------------------
WRITE_LINE_MEMBER( pia6821_device::cb1_w )
{
LOG("Set PIA input CB1 = %d\n", state);
// the new state has caused a transition
if ((m_in_cb1 != state) && ((state && c1_low_to_high(m_ctl_b)) || (!state && c1_high_to_low(m_ctl_b))))
{
LOG("CB1 triggering\n");
// mark the IRQ
m_irq_b1 = 1;
// update externals
update_interrupts();
// If CB2 is configured as a write-strobe output which is reset by a CB1
// transition, this reset will only happen when a read from port B implicitly
// clears the IRQ B1 flag. So we handle the CB2 reset there. Note that this
// is different from what happens with port A.
}
// set the new value for CB1
m_in_cb1 = state;
m_in_cb1_pushed = true;
}
//-------------------------------------------------
// cb2_w
//-------------------------------------------------
WRITE_LINE_MEMBER( pia6821_device::cb2_w )
{
LOG("Set PIA input CB2 = %d\n", state);
// if input mode and the new state has caused a transition
if (c2_input(m_ctl_b) &&
(m_in_cb2 != state) &&
((state && c2_low_to_high(m_ctl_b)) || (!state && c2_high_to_low(m_ctl_b))))
{
LOG("CB2 triggering\n");
// mark the IRQ
m_irq_b2 = 1;
// update externals
update_interrupts();
}
// set the new value for CA2
m_in_cb2 = state;
m_in_cb2_pushed = true;
}
//-------------------------------------------------
// output_cb2
//-------------------------------------------------
bool pia6821_device::cb2_output()
{
m_out_cb2_needs_pulled = false;
return m_out_cb2;
}
//-------------------------------------------------
// cb2_output_z
//-------------------------------------------------
bool pia6821_device::cb2_output_z()
{
return !c2_output(m_ctl_b);
}
//-------------------------------------------------
// control byte wrappers
//-------------------------------------------------
inline bool pia6821_device::irq1_enabled(uint8_t c) { return bool(BIT(c, 0)); }
inline bool pia6821_device::c1_low_to_high(uint8_t c) { return bool(BIT(c, 1)); }
inline bool pia6821_device::c1_high_to_low(uint8_t c) { return !bool(BIT(c, 1)); }
inline bool pia6821_device::output_selected(uint8_t c) { return bool(BIT(c, 2)); }
inline bool pia6821_device::irq2_enabled(uint8_t c) { return bool(BIT(c, 3)); }
inline bool pia6821_device::strobe_e_reset(uint8_t c) { return bool(BIT(c, 3)); }
inline bool pia6821_device::strobe_c1_reset(uint8_t c) { return !bool(BIT(c, 3)); }
inline bool pia6821_device::c2_set(uint8_t c) { return bool(BIT(c, 3)); }
inline bool pia6821_device::c2_low_to_high(uint8_t c) { return bool(BIT(c, 4)); }
inline bool pia6821_device::c2_high_to_low(uint8_t c) { return !bool(BIT(c, 4)); }
inline bool pia6821_device::c2_set_mode(uint8_t c) { return bool(BIT(c, 4)); }
inline bool pia6821_device::c2_strobe_mode(uint8_t c) { return !bool(BIT(c, 4)); }
inline bool pia6821_device::c2_output(uint8_t c) { return bool(BIT(c, 5)); }
inline bool pia6821_device::c2_input(uint8_t c) { return !bool(BIT(c, 5)); }