From 7e8e7c0ea8abd3b8ec47eee9493aa6099820130a Mon Sep 17 00:00:00 2001 From: braintro Date: Sun, 24 Mar 2019 15:32:00 -0500 Subject: oneshot.cpp: Add PCB layout for Mad Donna & various notes for One Shot One Kill [Brian Troha] --- src/mame/drivers/oneshot.cpp | 87 ++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 83 insertions(+), 4 deletions(-) diff --git a/src/mame/drivers/oneshot.cpp b/src/mame/drivers/oneshot.cpp index 95b99a9cf64..8d47ddba6f4 100644 --- a/src/mame/drivers/oneshot.cpp +++ b/src/mame/drivers/oneshot.cpp @@ -35,6 +35,85 @@ NOTE: An eBay auction of the PCB shows "1996.9.16 PROMAT" on the JAMMA+ adapter One Shot One Kill. This information was used for the year & manufacturer. Also listed in an Approved Game list on a HK government site as "Promet" + +Main board: ++---------------------------------------------+ +| 5MHz +------------+ | +|VOL YM3812 Z80A M6295 |25x6 row pin| | +| YM3014 6116 PAL +------------+ | +| PAL | +| +---------+ | +| KM681000LP | ACTEL | | +| | A1020A | | +| KM681000LP | PL84C | | +|J +---------+ | +|A | +|M +---------++---------+ | +|M MB.ROM | Cypress || ACTEL | | +|A KM6264 | CY7C384A|| A1020A | | +| KM6264 PAL | -XJC || PL84C | | +| +---------++---------+ | +| PAL PAL KM681000LP | +| DSW2 6 6116 KM681000LP PAL | +| 8 6116 PAL | +| DSW1 0 +------------+ | +| 27MHz 0 CXK58256 |25x4 row pin| | +|LED 12MHz 0 CXK58256 +------------+ | ++---------------------------------------------+ + + CPU: 68000, Z80A +Sound: YM2812/YM3014 + OKI M6295 (badged as K-666/K-664 + AD-65) + OSC: 27MHz, 12MHz & 5MHz + RAM: Samsung KM681000LP-10 128Kx8 Low power SRAM x 4 + Samsung KM6264AL-10 8Kx8 Low power SRAM x 2 + Sony CXK58256-10L 32Kx8 High speed SRAM x 2 + UMC UM6116K-2 2Kx8 SRAM x 3 +Other: Cypress CY7C384A 2K Very high speed Gate CMOS FPGA + Actel A1020A FPGA + DSW 8 position dipswitch x 2 + LED - Power LED + VOL - Volume adjust pot +Connectors to ROM board: + 25 pins by 6 rows & 25 pins by 4 rows + +Rom board: ++-----------------------+ +| +------------+ | +| |25x6 row pin| | +| +------------+ | +| U15* UI8 | +| | +| UA2 UI8A | +| | +| U14* UI11 | +| | +| UA22 UI11A | +| | +| UA24 UI13 | +| | +| +---------+ UI13A | +| | ACTEL | | +| | A1020A | UI16 | +| | PL84C | | +| +---------+ UI16A | +| +------------+ | +| |25x4 row pin| | +| +------------+ | ++-----------------------+ + +Note: * denotes unpopulated + +Other: Actel A1020A FPGA +Connectors to main board: + 25 pins by 6 rows & 25 pins by 4 rows + +For One Shot One Kill: + There is an additional board that connects to the JAMMA connector that has some logic chips, + a JAMMA edge connector and two 4 pin headers to connect the light guns as well as a 2 wire jumper + that connects to some ROM board logic chips (assumed) for light gun input. Also the YM3812 sound + chip appears to be unpopulated for One Shot One Kill. + The ROM board for One Shot One Kill has 8 additional logic chips along the front edge of the PCB + */ #include "emu.h" @@ -365,11 +444,11 @@ void oneshot_state::machine_reset() void oneshot_state::oneshot(machine_config &config) { /* basic machine hardware */ - M68000(config, m_maincpu, 12000000); + M68000(config, m_maincpu, 12_MHz_XTAL); m_maincpu->set_addrmap(AS_PROGRAM, &oneshot_state::oneshot_map); m_maincpu->set_vblank_int("screen", FUNC(oneshot_state::irq4_line_hold)); - Z80(config, "audiocpu", 5000000).set_addrmap(AS_PROGRAM, &oneshot_state::oneshot_sound_map); + Z80(config, "audiocpu", 5_MHz_XTAL).set_addrmap(AS_PROGRAM, &oneshot_state::oneshot_sound_map); // Not verified /* video hardware */ screen_device &screen(SCREEN(config, "screen", SCREEN_TYPE_RASTER)); @@ -387,11 +466,11 @@ void oneshot_state::oneshot(machine_config &config) GENERIC_LATCH_8(config, "soundlatch"); - ym3812_device &ymsnd(YM3812(config, "ymsnd", 3500000)); + ym3812_device &ymsnd(YM3812(config, "ymsnd", 5_MHz_XTAL/2)); // 2.5MHz or 3MHz (12MHz/4) ymsnd.irq_handler().set_inputline("audiocpu", 0); ymsnd.add_route(ALL_OUTPUTS, "mono", 1.0); - OKIM6295(config, m_oki, 1056000, okim6295_device::PIN7_HIGH); // clock frequency & pin 7 not verified + OKIM6295(config, m_oki, 5_MHz_XTAL/4, okim6295_device::PIN7_HIGH); // 1.25MHz??? - clock frequency & pin 7 not verified m_oki->add_route(ALL_OUTPUTS, "mono", 1.0); } -- cgit v1.2.3