From 1b027254cc155e9d5567215544315b31d8aeb89a Mon Sep 17 00:00:00 2001 From: hap Date: Fri, 1 Jul 2022 16:24:27 +0200 Subject: source org: remove obsolete prefix from bandai_design_master filename --- src/mame/bandai/bandai_design_master.cpp | 162 ------------------------------- src/mame/bandai/design_master.cpp | 162 +++++++++++++++++++++++++++++++ src/mame/mame.lst | 2 +- src/mame/mess.flt | 2 +- 4 files changed, 164 insertions(+), 164 deletions(-) delete mode 100644 src/mame/bandai/bandai_design_master.cpp create mode 100644 src/mame/bandai/design_master.cpp diff --git a/src/mame/bandai/bandai_design_master.cpp b/src/mame/bandai/bandai_design_master.cpp deleted file mode 100644 index 6331ae22f70..00000000000 --- a/src/mame/bandai/bandai_design_master.cpp +++ /dev/null @@ -1,162 +0,0 @@ -// license:BSD-3-Clause -// copyright-holders:David Haywood -/****************************************************************************************************************************** - - __________________________________IR___ - | ____ RX/TX | - | _____ ________ | | __ | - | | | | | | | | || - | |IC3 | | IC2 | | |CN2->_|| - | | | | | | | | - | |____| |_______| | | | - | ____ | | | - | | | CART SLOT->| | | - | |IC5| | | | - | |___| ________ | | | - | ____ | | | | | - | | | | IC1 | | | | - | |IC4| | | | | | - | |___| |_______| |___| | - | | - | SW2 | - |______________________________________| - - IC1 = Hitachi H8/328 (24K-byte internal ROM + 1K-byte RAM) - IC2 = Hitachi HG62G010R21FBN Gate Array (low gatecount and low I/O-count packages) - IC3 = Hitachi HM62256LFP-10T 256kbit CMOS SRAM - IC4 = BA10324AF Ground Sense Operational Amplifier - IC5 = Hitachi 74HC00 (5B2T HC00) - - - TODO: cartridge pinouts / information - - NOTE: cartridge dumps contain boot vectors so Internal ROM likely only used when no cartridge is present - -******************************************************************************************************************************/ - -#include "emu.h" -#include "cpu/h8/h83337.h" - -#include "bus/generic/slot.h" -#include "bus/generic/carts.h" - -#include "screen.h" -#include "softlist_dev.h" -//#include "speaker.h" - -class bdsm_state : public driver_device -{ -public: - bdsm_state(const machine_config &mconfig, device_type type, const char *tag) : - driver_device(mconfig, type, tag), - m_maincpu(*this, "maincpu"), - m_cartslot(*this, "cartslot"), - m_cartslot_region(nullptr), - m_bank(*this, "cartbank"), - m_screen(*this, "screen") - { } - - void bdesignm(machine_config &config); - -protected: - virtual void machine_start() override; - -private: - void io_map(address_map &map); - void mem_map(address_map &map); - - uint16_t io_p7_r(); - void io_p7_w(offs_t offset, uint16_t data, uint16_t mem_mask = ~0); - - uint32_t screen_update(screen_device& screen, bitmap_rgb32& bitmap, const rectangle& cliprect); - - DECLARE_DEVICE_IMAGE_LOAD_MEMBER(cart_load_bdesignm); - - required_device m_maincpu; - required_device m_cartslot; - memory_region *m_cartslot_region; - required_memory_bank m_bank; - required_device m_screen; -}; - -void bdsm_state::machine_start() -{ - if (m_cartslot && m_cartslot->exists()) - { - std::string region_tag; - m_cartslot_region = memregion(region_tag.assign(m_cartslot->tag()).append(GENERIC_ROM_REGION_TAG).c_str()); - m_bank->configure_entries(0, (m_cartslot_region->bytes() / 0x8000), m_cartslot_region->base(), 0x8000); - m_bank->set_entry(0); // only the first bank seems to contain a valid reset vector '0x50' which points at the first code in the ROM. The other banks contain 0x5a00 as the reset vector. IRQ vector seems valid in all banks. - } else - m_bank->set_base(memregion("roms")->base()); -} - -DEVICE_IMAGE_LOAD_MEMBER(bdsm_state::cart_load_bdesignm) -{ - uint32_t size = m_cartslot->common_get_size("rom"); - - m_cartslot->rom_alloc(size, GENERIC_ROM16_WIDTH, ENDIANNESS_BIG); - m_cartslot->common_load_rom(m_cartslot->get_rom_base(), size, "rom"); - - return image_init_result::PASS; -} - -void bdsm_state::mem_map(address_map &map) -{ - map(0x0000, 0x7fff).bankr("cartbank"); - map(0x8000, 0x895f).ram().share("unkram"); -} - -uint16_t bdsm_state::io_p7_r() -{ - return machine().rand(); -} - -void bdsm_state::io_p7_w(offs_t offset, uint16_t data, uint16_t mem_mask) -{ - logerror("%s: io_p7_w %04x %04x\n", machine().describe_context(), data, mem_mask); -} - - -void bdsm_state::io_map(address_map &map) -{ - map(h8_device::PORT_7, h8_device::PORT_7).rw(FUNC(bdsm_state::io_p7_r), FUNC(bdsm_state::io_p7_w)); -} - -static INPUT_PORTS_START( bdesignm ) -INPUT_PORTS_END - -uint32_t bdsm_state::screen_update(screen_device &screen, bitmap_rgb32 &bitmap, const rectangle &cliprect) -{ - return 0; -} - - -void bdsm_state::bdesignm(machine_config &config) -{ - /* basic machine hardware */ - H83334(config, m_maincpu, XTAL(20'000'000)); /* H8/328 (24kbytes internal ROM, 1kbyte internal ROM) ?Mhz */ - m_maincpu->set_addrmap(AS_PROGRAM, &bdsm_state::mem_map); - m_maincpu->set_addrmap(AS_IO, &bdsm_state::io_map); - - SCREEN(config, m_screen, SCREEN_TYPE_LCD); - m_screen->set_refresh_hz(60); - m_screen->set_size(160, 150); // resolution unknown - m_screen->set_visarea(0, 160-1, 0, 150-1); - m_screen->set_screen_update(FUNC(bdsm_state::screen_update)); - m_screen->set_vblank_time(ATTOSECONDS_IN_USEC(0)); - - GENERIC_CARTSLOT(config, m_cartslot, generic_linear_slot, "bdesignm_cart"); // TODO: this should be a custom bus type with capability to plug the 'design' carts into it - //m_cartslot->set_must_be_loaded(true); - - SOFTWARE_LIST(config, "cart_list_game").set_original("bdesignm_game_cart"); // Game carts, these appear to disable the Internal ROM - SOFTWARE_LIST(config, "cart_list_design").set_original("bdesignm_design_cart"); // You can also plug a design cart directly into the unit for use by the Internal ROM program (they contain no program) -} - -ROM_START( bdesignm ) - ROM_REGION16_BE(0x88000, "roms", ROMREGION_ERASE00) - ROM_LOAD( "h8_328.bin", 0x00000, 0x6000, NO_DUMP ) // internal rom (When the console is booted up without a cart it enters the default (builtin) art / drawing program, otherwise probably not used as carts contain boot vectors etc.) -ROM_END - - -CONS( 1995, bdesignm, 0, 0, bdesignm, bdesignm, bdsm_state, empty_init, "Bandai", "Design Master Denshi Mangajuku", MACHINE_IS_SKELETON ) diff --git a/src/mame/bandai/design_master.cpp b/src/mame/bandai/design_master.cpp new file mode 100644 index 00000000000..6331ae22f70 --- /dev/null +++ b/src/mame/bandai/design_master.cpp @@ -0,0 +1,162 @@ +// license:BSD-3-Clause +// copyright-holders:David Haywood +/****************************************************************************************************************************** + + __________________________________IR___ + | ____ RX/TX | + | _____ ________ | | __ | + | | | | | | | | || + | |IC3 | | IC2 | | |CN2->_|| + | | | | | | | | + | |____| |_______| | | | + | ____ | | | + | | | CART SLOT->| | | + | |IC5| | | | + | |___| ________ | | | + | ____ | | | | | + | | | | IC1 | | | | + | |IC4| | | | | | + | |___| |_______| |___| | + | | + | SW2 | + |______________________________________| + + IC1 = Hitachi H8/328 (24K-byte internal ROM + 1K-byte RAM) + IC2 = Hitachi HG62G010R21FBN Gate Array (low gatecount and low I/O-count packages) + IC3 = Hitachi HM62256LFP-10T 256kbit CMOS SRAM + IC4 = BA10324AF Ground Sense Operational Amplifier + IC5 = Hitachi 74HC00 (5B2T HC00) + + + TODO: cartridge pinouts / information + + NOTE: cartridge dumps contain boot vectors so Internal ROM likely only used when no cartridge is present + +******************************************************************************************************************************/ + +#include "emu.h" +#include "cpu/h8/h83337.h" + +#include "bus/generic/slot.h" +#include "bus/generic/carts.h" + +#include "screen.h" +#include "softlist_dev.h" +//#include "speaker.h" + +class bdsm_state : public driver_device +{ +public: + bdsm_state(const machine_config &mconfig, device_type type, const char *tag) : + driver_device(mconfig, type, tag), + m_maincpu(*this, "maincpu"), + m_cartslot(*this, "cartslot"), + m_cartslot_region(nullptr), + m_bank(*this, "cartbank"), + m_screen(*this, "screen") + { } + + void bdesignm(machine_config &config); + +protected: + virtual void machine_start() override; + +private: + void io_map(address_map &map); + void mem_map(address_map &map); + + uint16_t io_p7_r(); + void io_p7_w(offs_t offset, uint16_t data, uint16_t mem_mask = ~0); + + uint32_t screen_update(screen_device& screen, bitmap_rgb32& bitmap, const rectangle& cliprect); + + DECLARE_DEVICE_IMAGE_LOAD_MEMBER(cart_load_bdesignm); + + required_device m_maincpu; + required_device m_cartslot; + memory_region *m_cartslot_region; + required_memory_bank m_bank; + required_device m_screen; +}; + +void bdsm_state::machine_start() +{ + if (m_cartslot && m_cartslot->exists()) + { + std::string region_tag; + m_cartslot_region = memregion(region_tag.assign(m_cartslot->tag()).append(GENERIC_ROM_REGION_TAG).c_str()); + m_bank->configure_entries(0, (m_cartslot_region->bytes() / 0x8000), m_cartslot_region->base(), 0x8000); + m_bank->set_entry(0); // only the first bank seems to contain a valid reset vector '0x50' which points at the first code in the ROM. The other banks contain 0x5a00 as the reset vector. IRQ vector seems valid in all banks. + } else + m_bank->set_base(memregion("roms")->base()); +} + +DEVICE_IMAGE_LOAD_MEMBER(bdsm_state::cart_load_bdesignm) +{ + uint32_t size = m_cartslot->common_get_size("rom"); + + m_cartslot->rom_alloc(size, GENERIC_ROM16_WIDTH, ENDIANNESS_BIG); + m_cartslot->common_load_rom(m_cartslot->get_rom_base(), size, "rom"); + + return image_init_result::PASS; +} + +void bdsm_state::mem_map(address_map &map) +{ + map(0x0000, 0x7fff).bankr("cartbank"); + map(0x8000, 0x895f).ram().share("unkram"); +} + +uint16_t bdsm_state::io_p7_r() +{ + return machine().rand(); +} + +void bdsm_state::io_p7_w(offs_t offset, uint16_t data, uint16_t mem_mask) +{ + logerror("%s: io_p7_w %04x %04x\n", machine().describe_context(), data, mem_mask); +} + + +void bdsm_state::io_map(address_map &map) +{ + map(h8_device::PORT_7, h8_device::PORT_7).rw(FUNC(bdsm_state::io_p7_r), FUNC(bdsm_state::io_p7_w)); +} + +static INPUT_PORTS_START( bdesignm ) +INPUT_PORTS_END + +uint32_t bdsm_state::screen_update(screen_device &screen, bitmap_rgb32 &bitmap, const rectangle &cliprect) +{ + return 0; +} + + +void bdsm_state::bdesignm(machine_config &config) +{ + /* basic machine hardware */ + H83334(config, m_maincpu, XTAL(20'000'000)); /* H8/328 (24kbytes internal ROM, 1kbyte internal ROM) ?Mhz */ + m_maincpu->set_addrmap(AS_PROGRAM, &bdsm_state::mem_map); + m_maincpu->set_addrmap(AS_IO, &bdsm_state::io_map); + + SCREEN(config, m_screen, SCREEN_TYPE_LCD); + m_screen->set_refresh_hz(60); + m_screen->set_size(160, 150); // resolution unknown + m_screen->set_visarea(0, 160-1, 0, 150-1); + m_screen->set_screen_update(FUNC(bdsm_state::screen_update)); + m_screen->set_vblank_time(ATTOSECONDS_IN_USEC(0)); + + GENERIC_CARTSLOT(config, m_cartslot, generic_linear_slot, "bdesignm_cart"); // TODO: this should be a custom bus type with capability to plug the 'design' carts into it + //m_cartslot->set_must_be_loaded(true); + + SOFTWARE_LIST(config, "cart_list_game").set_original("bdesignm_game_cart"); // Game carts, these appear to disable the Internal ROM + SOFTWARE_LIST(config, "cart_list_design").set_original("bdesignm_design_cart"); // You can also plug a design cart directly into the unit for use by the Internal ROM program (they contain no program) +} + +ROM_START( bdesignm ) + ROM_REGION16_BE(0x88000, "roms", ROMREGION_ERASE00) + ROM_LOAD( "h8_328.bin", 0x00000, 0x6000, NO_DUMP ) // internal rom (When the console is booted up without a cart it enters the default (builtin) art / drawing program, otherwise probably not used as carts contain boot vectors etc.) +ROM_END + + +CONS( 1995, bdesignm, 0, 0, bdesignm, bdesignm, bdsm_state, empty_init, "Bandai", "Design Master Denshi Mangajuku", MACHINE_IS_SKELETON ) diff --git a/src/mame/mame.lst b/src/mame/mame.lst index 30eef68ab5c..6827d715b59 100644 --- a/src/mame/mame.lst +++ b/src/mame/mame.lst @@ -3364,7 +3364,7 @@ triviaes5 // (c) 19?? (Maibesa hardware) @source:banctec/banctec.cpp banctec // BancTec ESeries panel -@source:bandai/bandai_design_master.cpp +@source:bandai/design_master.cpp bdesignm @source:sanritsu/bankp.cpp diff --git a/src/mame/mess.flt b/src/mame/mess.flt index 896a7b26bf8..18aae54476e 100644 --- a/src/mame/mess.flt +++ b/src/mame/mess.flt @@ -76,7 +76,7 @@ att/att630.cpp att/unixpc.cpp aviion/aviion88k.cpp banctec/banctec.cpp -bandai/bandai_design_master.cpp +bandai/design_master.cpp bandai/rx78.cpp bandai/sv8000.cpp bandai/tamag1.cpp -- cgit v1.2.3