summaryrefslogtreecommitdiffstatshomepage
path: root/src/mame/drivers/univac.cpp
diff options
context:
space:
mode:
Diffstat (limited to 'src/mame/drivers/univac.cpp')
-rw-r--r--src/mame/drivers/univac.cpp96
1 files changed, 63 insertions, 33 deletions
diff --git a/src/mame/drivers/univac.cpp b/src/mame/drivers/univac.cpp
index 6386475511d..1055248b75b 100644
--- a/src/mame/drivers/univac.cpp
+++ b/src/mame/drivers/univac.cpp
@@ -2,22 +2,33 @@
// copyright-holders:Robbbert
/***************************************************************************
- Univac Terminals
+Univac Terminals
- The terminals are models UTS20, UTS30, UTS40, UTS50 and SVT1120,
- however only the UTS20 is dumped (program roms only).
+The terminals are models UTS20, UTS30, UTS40, UTS50 and SVT1120,
+however only the UTS20 is dumped (program roms only).
- 25/05/2009 Skeleton driver
+2009-05-25 Skeleton driver
- The terminal has 2 screens selectable by the operator with the Fn + 1-2
- buttons. Thus the user can have two sessions open at once, to different
- mainframes or applications.
+The terminal has 2 screens selectable by the operator with the Fn + 1-2
+buttons. Thus the user can have two sessions open at once, to different
+mainframes or applications. The keyboard connected to the terminal with
+a coiled cord and a 9-pin D-connector.
- Sound is a beeper.
+Sound is a beeper.
+
+This driver is all guesswork; Unisys never released technical info
+to customers. All parts on the PCBs have internal Unisys part numbers
+instead of the manufacturer's numbers.
+
+Notes on failures in power-on test:
+* Test 2 checks RAM parity. Patched out
+* Test 5 tests ROM checksum. It seems one or more roms is a bad dump.
+* Test 7 tests SIO ch B. The SIO should cause 9 interrupts. The CTC is
+ programmed as a time-out. But SIO only does first interrupt then hangs.
+ CTC then fires causing the failure message. It's unknown which CTC
+ channel drives Ch B, none seem to work. CTC trigger frequencies are
+ all guesswork too, but the present setup allows Tests 3 and 6 to pass.
- This driver is all guesswork; Unisys never released technical info
- to customers. All parts on the PCBs have internal Unisys part numbers
- instead of the manufacturer's numbers.
****************************************************************************/
@@ -26,9 +37,11 @@
#include "cpu/z80/z80daisy.h"
#include "machine/nvram.h"
#include "machine/z80ctc.h"
-#include "machine/z80dart.h"
+#include "machine/z80sio.h"
#include "machine/clock.h"
#include "screen.h"
+#include "sound/beep.h"
+#include "speaker.h"
class univac_state : public driver_device
@@ -40,13 +53,15 @@ public:
, m_p_videoram(*this, "videoram")
, m_nvram(*this, "nvram")
, m_ctc(*this, "ctc")
- , m_dart(*this, "dart")
+ , m_uart(*this, "uart")
, m_p_chargen(*this, "chargen")
+ , m_beep(*this, "beeper")
{ }
DECLARE_READ8_MEMBER(vram_r);
DECLARE_WRITE8_MEMBER(vram_w);
DECLARE_WRITE8_MEMBER(port43_w);
+ DECLARE_WRITE8_MEMBER(porte6_w);
uint32_t screen_update(screen_device &screen, bitmap_ind16 &bitmap, const rectangle &cliprect);
private:
@@ -58,12 +73,18 @@ private:
required_shared_ptr<uint8_t> m_p_videoram;
required_device<nvram_device> m_nvram;
required_device<z80ctc_device> m_ctc;
- required_device<z80dart_device> m_dart;
+ required_device<z80sio_device> m_uart;
required_region_ptr<u8> m_p_chargen;
+ required_device<beep_device> m_beep;
};
+WRITE8_MEMBER( univac_state::porte6_w )
+{
+ m_beep->set_state(BIT(data, 0));
+}
+
WRITE8_MEMBER( univac_state::port43_w )
{
m_screen_num = BIT(data, 0);
@@ -92,10 +113,11 @@ ADDRESS_MAP_END
static ADDRESS_MAP_START( uts20_io, AS_IO, 8, univac_state)
ADDRESS_MAP_GLOBAL_MASK(0xff)
ADDRESS_MAP_UNMAP_HIGH
- AM_RANGE(0x00, 0x03) AM_DEVREADWRITE("dart", z80dart_device, cd_ba_r, cd_ba_w)
+ AM_RANGE(0x00, 0x03) AM_DEVREADWRITE("uart", z80sio_device, cd_ba_r, cd_ba_w)
AM_RANGE(0x20, 0x23) AM_DEVREADWRITE("ctc", z80ctc_device, read, write)
AM_RANGE(0x43, 0x43) AM_WRITE(port43_w)
AM_RANGE(0x80, 0xbf) AM_RAM AM_SHARE("nvram")
+ AM_RANGE(0xe6, 0xe6) AM_WRITE(porte6_w)
ADDRESS_MAP_END
/* Input ports */
@@ -111,17 +133,11 @@ void univac_state::machine_start()
void univac_state::machine_reset()
{
m_screen_num = 0;
+ m_beep->set_state(0);
}
uint32_t univac_state::screen_update(screen_device &screen, bitmap_ind16 &bitmap, const rectangle &cliprect)
{
- // this is used to get the ctc to pass the test
- bool state = BIT(m_framecnt,0);
- m_ctc->trg0(state);
- m_ctc->trg1(state);
- m_ctc->trg2(state);
- m_ctc->trg3(state);
-
uint8_t y,ra,chr,gfx;
uint16_t sy=0,ma=0,x;
uint8_t *videoram = m_p_videoram;//+(m_screen_num ? 0x2000 : 0);
@@ -162,7 +178,7 @@ uint32_t univac_state::screen_update(screen_device &screen, bitmap_ind16 &bitmap
static const z80_daisy_config daisy_chain[] =
{
- { "dart" },
+ { "uart" },
{ "ctc" },
{ nullptr }
};
@@ -186,16 +202,29 @@ static MACHINE_CONFIG_START( uts20 )
MCFG_NVRAM_ADD_1FILL("nvram")
- MCFG_DEVICE_ADD("uart_clock", CLOCK, 153600)
- MCFG_CLOCK_SIGNAL_HANDLER(DEVWRITELINE("dart", z80dart_device, txca_w))
- MCFG_DEVCB_CHAIN_OUTPUT(DEVWRITELINE("dart", z80dart_device, rxca_w))
- MCFG_DEVCB_CHAIN_OUTPUT(DEVWRITELINE("dart", z80dart_device, txcb_w))
- MCFG_DEVCB_CHAIN_OUTPUT(DEVWRITELINE("dart", z80dart_device, rxcb_w))
+ MCFG_DEVICE_ADD("ctc_clock", CLOCK, 2000000)
+ MCFG_CLOCK_SIGNAL_HANDLER(DEVWRITELINE("ctc", z80ctc_device, trg0))
+ MCFG_DEVCB_CHAIN_OUTPUT(DEVWRITELINE("ctc", z80ctc_device, trg1))
+ MCFG_DEVCB_CHAIN_OUTPUT(DEVWRITELINE("ctc", z80ctc_device, trg2))
+ MCFG_DEVCB_CHAIN_OUTPUT(DEVWRITELINE("ctc", z80ctc_device, trg3))
+
+ //MCFG_DEVICE_ADD("uart_clock", CLOCK, 307200)
+ //MCFG_DEVCB_CHAIN_OUTPUT(DEVWRITELINE("uart", z80sio_device, txcb_w))
+ //MCFG_DEVCB_CHAIN_OUTPUT(DEVWRITELINE("uart", z80sio_device, rxcb_w))
MCFG_DEVICE_ADD("ctc", Z80CTC, XTAL_4MHz)
MCFG_Z80CTC_INTR_CB(INPUTLINE("maincpu", INPUT_LINE_IRQ0))
- MCFG_DEVICE_ADD("dart", Z80DART, XTAL_4MHz)
- MCFG_Z80DART_OUT_INT_CB(INPUTLINE("maincpu", INPUT_LINE_IRQ0))
+ MCFG_Z80CTC_ZC1_CB(DEVWRITELINE("uart", z80sio_device, txca_w))
+ MCFG_DEVCB_CHAIN_OUTPUT(DEVWRITELINE("uart", z80sio_device, rxca_w))
+ MCFG_Z80CTC_ZC2_CB(DEVWRITELINE("uart", z80sio_device, rxtxcb_w))
+
+ MCFG_DEVICE_ADD("uart", Z80SIO, XTAL_4MHz)
+ MCFG_Z80SIO_OUT_INT_CB(INPUTLINE("maincpu", INPUT_LINE_IRQ0))
+
+ /* Sound */
+ MCFG_SPEAKER_STANDARD_MONO("mono")
+ MCFG_SOUND_ADD("beeper", BEEP, 950) // guess
+ MCFG_SOUND_ROUTE(ALL_OUTPUTS, "mono", 0.10)
MACHINE_CONFIG_END
@@ -207,9 +236,10 @@ ROM_START( uts20 )
ROM_LOAD( "uts20c.rom", 0x2000, 0x1000, CRC(4e334705) SHA1(ff1a730551b42f29d20af8ecc4495fd30567d35b) )
ROM_LOAD( "uts20d.rom", 0x3000, 0x1000, CRC(76757cf7) SHA1(b0509d9a35366b21955f83ec3685163844c4dbf1) )
ROM_LOAD( "uts20e.rom", 0x4000, 0x1000, CRC(0dfc8062) SHA1(cd681020bfb4829d4cebaf1b5bf618e67b55bda3) )
+ // Patches, see notes at top.
ROM_FILL(0x2bd,1,0xaf) // test 2
- ROM_FILL(0x3c1,2,0xaf) // test 5
- ROM_FILL(0x928,1,0x00)
+ ROM_FILL(0x48f1,1,0xa3) // test 5, patch unused byte to fix checksum
+ ROM_FILL(0x928,1,0x00) // upon failure keep going
/* character generator not dumped, using the one from 'c10' for now */
ROM_REGION( 0x2000, "chargen", 0 )
@@ -219,4 +249,4 @@ ROM_END
/* Driver */
// YEAR NAME PARENT COMPAT MACHINE INPUT CLASS INIT COMPANY FULLNAME FLAGS
-COMP( 1980, uts20, 0, 0, uts20, uts20, univac_state, 0, "Sperry Univac", "UTS-20", MACHINE_NOT_WORKING | MACHINE_NO_SOUND )
+COMP( 1980, uts20, 0, 0, uts20, uts20, univac_state, 0, "Sperry Univac", "UTS-20", MACHINE_NOT_WORKING )